Transparent video during export

Similar Questions

• Always get horizontal lines on video during export to 720 x 480 AVI with "Deinterlace" turned on

  Professional Hello again fine,

  I use 6 first on a Windows 7 computer.

  I always get horizontal lines in my video during export to AVI 720 x 480, even with "Deinterlace" lit.

  I had a doubt on another thread and said robodog2 that it is interlaced with the lines of the file are not displayed when you use a selection of progressive export file...

  http://forums.Adobe.com/thread/852077

  So I found the box "Deinterlace" via "chronology of export > movie > settings > special treatment > Modify > deinterlace ', but if I have this box checked, I still have horizontal lines.

  Here are the screenshots of the same base video before importing them in at first for an effect reverse, and after I saved the resulting file 720 x 480 AVI... the final file appears with the same horizontal lines if yes or no deinterlacing is checked.

  Lines are more visible when viewing the video in Windows Media Player they appear in these screenshots below... the lines have in fact characteristics of edge in the public eye.  The lines look like an old used TV sometimes when the antenna was not getting good reception.  Also, I am saving successfully the "chronology of export > movie" path with different codecs (this is no longer a file generated from the preview, I was talking about in the previous thread on this)... so I'm sure all the parameters with this version and I get this result with three different codecs, with and without the "Deinterlace" checked... I had the same experience over and over yesterday evening while he was also working with another file.

  No one knows what is the cause?... Please see the pictures below

  Thank you

  digiday

  AVI file of front of record in first -own original 720 x 480, 30 frames per second

  

  After the backup in the first 6

  Horizontal lines showing in this first 6, 720 x 480, 30 fps AVI file

  

  Hi David,

  Yes, I finally solve this problem, based on a chance observation on another forum.  On another forum a guy once mentioned the setting ' NONE FRAME ' in the 'Record Options' in the dialog "Export movie" when I export my movie to an AVI file, as seen in my screen shot below.  Otherwise, I think that setting was failing to "FIRST FRAME ABOVE".

  For the most part, I was getting these terrible horizontal lines when I exported the graphic effects that I created with imported Photoshop layers in my film projects... in these kinds of exports that horizontal lines were much worse and more obvious that if I was just export a project with the actual video that I had imported in my project.

  But still, even with the imported video, as examples of images that I posted on this thread, even in this case I saw the horizontal lines.

  So one guy on another forum said something about "ANY FRAME" setting in my export dialog box.  It relates to something else about deinterlacing it is better for this problem as the "FIRST FRAME SUPERIOR" or "FIRST FRAME BELOW" settings.

  As can be seen in my screenshot below, which is the setting I talk, but I was using the old 6 first of 1999all about, and options in the new versions of first export dialog are different.  The guy on the other forum that mentions that setting, that eventually solved my problem, said that the adjustment did not differ in a newer version of first he used, but I found this setting in my dialog "Export movie" , and that solved the problem.

  It was so simple and I went by so many things to try to solve it, including my files running through other apps to try to pre empt the problem and none of it worked... He just turns out to be THAT simple adjustment "ANY FIELD" and that solved the whole problem.

  First 6 and some newer versions of first, seem to have other problems, such as the creation of an oblong shape, rotation image from a round graph-shaped eggs after importation and applying an effect of rotation, but otherwise, once I realized that the solution of horizontal lines, I did pretty well understand many things in this former first and I got pretty good results.

  Viel Glück!

  

• Transparent video export QuickTime problem

  I try to export the transparent video to QuickTime, but get the same error. What's wrong?

  [Title amended to add clarity. - Mod].

  Well, after several times of installing and uninstalling Quictime he worked all of a sudden without changing all the settings...

  "Thank you all for trying to help"

• transparent video in Flash 8 Pro

  Hi all
  
  I'm having a problem by creating a transparent video in Flash 8 pro for use on a web page.
  I want to do is to have a web page that has a video on it (using Flash) of a person walking on the page, but the majority of the video is transparent and the only part that you see is the person walking around.
  I know you've seen examples, as shown on the website of Studio 8:
  http://www.Adobe.com/products/Studio/experience/
  This example shows a large site entirely in Flash, but you can still accomplish all of this without the entire site in Flash.
  
  The way I understand the process (in a nutshell) be is like this:
  (1) turn the video on a green screen
  (2) import video video editor (I happen to have only adobe elements 2.0 at my disposal first)
  (3) remove the green of the video which should create an alpha channel
  (4) video export
  (5) video import in Flash choose custom options and specifying the On2 VP6 video codec, and check the box "encode alpha channel.
  (6) to publish your videos and the web page from flash and view on the web
  
  I did everything above, but when I finally see my video on the web, or through Flash, I still have a bunch of black background. (The scene of the flash document background is white too, btw.) It seems that I'm not clearly define the alpha channel in the video or the format that I use does not support an alpha channel. I can't understand. I tried to export the video as .avi and .mov, but neither one import in Flash w / transparency. I can't find anything that explains how do this any more either in the documentation for Flash or Premiere or on the web.
  Can anyone help?
  
  Thank you
  VIC

  Good, solved my problem.
  This can be applied to other video editing software, but I found that it works in Adobe Premiere (Pro and elements).

  The problem is that after I had removed my green screen of the video, I wasn't not choose the right options in the export.
  You should export .mov and in your export movie settings, make sure that "Compressor" is set to "Animation" and the "color depth" has the value "million + colors ', NOT 'Millions of colors '. It is the key element to make the transparent video once you import it into Flash.

  For a good tutorial on the entire process, see this:
  http://www.communitymx.com/abstract.cfm?cid=8F805

  Just thought I'd share.
  VIC

• Dell order configure 3.1.0.250 crashing during export to exe

  Dell order configure 3.1.0.250 crashing during export to exe. I tried on two different machines with the same result. I have .NET Framework installed 4.5.2. Here's the report from crashing Windows.

  Signature of the problem:
  Problem event name: CLR20r3
  Signature of the problem 01: cctkgui.exe
  Signature of the problem 02: 3.1.0.0
  Signature of the 03:559147 c 2 problem
  Signature of the problem 04: WindowsBase
  Signature of the problem 05: 4.0.30319.34209
  Signature of the 06 problem: 5348b4e9
  Signature of the 07 problem: f61
  08:6 problem signature
  Signature of the problem 09: System.InvalidOperationException
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033
  Additional information 1: 6d8c
  More information 2: 6d8c9c0d6ed9fe2f95cec4737399f068
  Additional information 3: J183
  Additional information 4: d18349a1ed7c01d977b9ab4c0697af85

  After posting the answer, I tried to create an exe from the package of local system and leading to an accident too.

  And also, when you asked for the model of the platform, if you meant what systems the package will be deployed on, his will mainly be on Optiplex 9020 and 9010 s.

• Is it possible to put a video during running on the app or an image?

  Is it possible to put a video during running on the app or an image?

  You can't put a video instead of the boot image.

• Red and yellow stripes on my video after export to Adobe first CC

  Hello gentlemen of Adobe!

  I searched all over the internet, but I did not find my answer.

  I downloaded the latest update for Adobe premiere cc (2015) on my Macbook Pro retina 15 "(2013, 2.3 GHz Intel Core i7, 16 GB DDR3, GeForce GT 750 M 2048 MB) and I have no why but I still have the red and yellow stripes, appearing on my video after export H264, MOV, MPEG2, MP4. So, I have my softwareuninstalled and reinstalled, but nothing seems to work...

  
  

  Do you have any advice? Or do you know how to solve this problem?

  
  Thank you very much for all your answers, and I'm really sorry for my bad English!

  

  Many people have seen my post, but nobody has tried to answer...

  So never mind I found what I needed, you just when you export to do the rendering with the mercury playback engine only. I don't know why adobe make it so complicated.

• Why first let me not reverse a transparent video clip?

  I am creating a countdown with a timecode in a transparent video clip, then reverse the clip, but the first will not let me reverse a transparent video clip. Is there a way around this, or a better way to create a countdown?

  Nest, then reverse.

• Is it possible to disable the play button during export to exe or app files?

  Is it possible to disable the play button during export to exe or app files? Can the app just start without the playbutton?

  For me it loads instantly on Mac as an application as well. The slides appear automatically, without, I must hit the 'play' button. You can go to preferences - beginning and end and check - Auto Play. If you want to reduce the loading time, choose the Preloader option and reduce to 20 about and republish.

  Thank you

  Anjaneai

• CS6 Indesign crashes during export epub

  My indesign cs6 crashes during export epub. I have windows 7. I uninstalled and installed again, but nothing happened. When I start to export with the kindle amazon program also plugin stops working, theoretically it is not a bug of amazon. What to do. Could someone help? Thank you. I have had no error message.

  I would post your problem in the forum here http://forums.adobe.com/community/indesign/indesign_generalInDesign. They will be able to help you.

• Slug of transparent video

  Hello

  Try to use a transparent video clip with a lens flare effect. Nothing happens when I apply the lens flare effect, even if the manual online said that this effect should work. I can easily add a grid or a lightning effect to the same transparent video clip without a hitch. Any ideas?

  Thank you

  Pete

  Depends on the Lens Flare effect integrated in the first

  the opacity of the element to which it is applied.

  Apply the effect directly to your clip and use the

  Control "Blend with the Original" to set the opacity of the torch.

  Effect of Lens Flare

  If you really need your light parasite to be on a separate layer of your video,

  You can apply to a clip of "Black Video" on a second layer, then the value of the element

  the "Screen" blend mode.

  

• Problem of resizing during export (LR3.0)

  I'm trying to export with the dimensions of 720 x 540 pixels. The export picture is 720 x 480 pixels. What I am doing wrong?

  Rick

  As Lee Jay said, you probably have cropped not the image that you are exporting to a 4:3 ratio. One of the good features on export from LR is that it does not distort the images during export, but maintains the ratio of the crop in the image you are exporting and match the version exported to what you have specified. So try to crop your image using the 4:3 ratio from the drop of the crop tool and see what happens.

• During export, videos remain the same length as the full clips.

  When I finished a project of editing my video exported will remain the same length as the full clips as I entered. For example, if I have a really long clip, and I remove certain parts, when exported, it will display the edited version, but there will be a black screen at the end that lasts until the original clip would have ended.

  Shorten the length of the model.

• Video and Audio files are of different lengths during export

  I try just be comforatable with a much faster position of Windows on the body and AE.

  I exported just my first project of the body to burn on Blu - ray, as I have done dozens of times on our old Mac Pro without problems.

  My agency is 07:04:18 in length.  I export the video as a Blu - ray to mp2 video and import it in again and it shows up at the same length.

  I export audio in an AIF import it in again, and it appears as 07:06:19 length - 2 seconds and 1 frame longer.

  Everything is CS6.  File is 1920 x 1080, pixel, 29.97 sq.

  Any suggestions as to why this is happening?

  I've heard of .aif files, but never used for something in my life - on a PC, the .wav is the audio format by default. Something that can help your current workflow is that, rather than burn to disc, in the Build section, you can export a PICTURE DISC or .iso file and could be easier to carry on toward the Mac for burning.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Green frames during export from 2014 CC

  Hello. I just updateted to the latest edition of first pro (also as all other CC software I installed which includes soul, phoshop, speedgrade, hearing and after effects). Versions of the software are later.

  My computer is late2013 macbook pro with nvidia graphics card, and I have all the system updates installed, nothing special happens.

  Here's the question:

  When you export the project, I randomly get green frames, full green boxes. Complitely randomly, no reason whatsoever.

  My workflow were also: film shot with two cameras Sony and I encoded all documents in format mxf with an earlier version of SOUL stage. I started the project at an earlier stage first, and I already have 19 of the 23 contains sequences of this project, no problem at all with an earlier version of the soul & creation. Now, I've updated to the latest cc 2014 and these green boxes started coming out randomly. I have not used plugins or effects, only some first threeway own colorcorrector and bightness & contrast. Parts of the clip are transparent black video textbackground with effect applied cropping and textlayer base first own text editor. I exported grpahics few sequels (both the lates as a step previous version) in proress 4444 RGP + alpha format. And im exporting using youtube SD widescreen 360 settings, nothing has changed. Yet once, everything worked perfectly before upgrade.

  I tried insofar as things:

  clear the caches manually and each software

  normal start

  reset the PRAM

  SafeBoot

  checking the update

  export XML from 2014 cc and importation to the earlier first-> no luck, things I have screwed up somehow

  Make a copy of two project files, I compared and changed some number of 27-26 > version so I could open the first project earlier-> no luck (it worked in the past for cs6 when I had to import the cs6 project in cs5.5)

  A little short on time, so the rest of the night im going to pass those a re-edition of the sequences I have today with a more recent version of first. Adobe will pay for me for those extra hours, I think that my client will not approve a day extraediting (night because of the schedule, they must be ready tomorrow with no green boxes) due to software problem?

  Ask what you want, I'm 100% sure that's not a user error since everything was fine with earlier version first. I will copy and paste this to the bug report too.

  Thank you

  Sorry for the very late reply, don't know if that even helps (maybe someone else can be found here..) but now I have to update my drivers cuda and rendering works fine. Google your graphics card, mac + cuda driverif you have the nvidia card on your machine. Otherwise, encoder search line at the bottom of the queue window, see you ' renderer: ", change that.