Transparent video export QuickTime problem

Similar Questions

• Video export FLV problems.

  Here is the process I followed to convert a video to an FLV file for a Web site.  I click on FILE... EXPORT... MEDIA... Change the format to FLV... I have change the preset Web 512 x 288... I give out a name and a place... EXPORT the VIDEO & AUDIO of EXPORT are both checked... my problem is that when I type EXPORT percentage never leaves 0%... It does not start the encoding... This has never happened before... of suggestions or insight would be greatly appreciated.

  Ok.

  You perform a direct export (export button) or through Adobe Media Encoder (the queue button)?

• Why Quicktime can't read my video exported from Premiere Pro?

  Why Quicktime can't read my video exported from Premiere Pro? Help, please.

  It worked! The problem was that I have not enough memory on the disk I'm exporting to. So probably it was not fully exporting. Thanks anyway!

• Unable to export Quicktime after first upgrade 7.0 to 8.0 (2014) incompatible "video codec" error in preset

  In the previous version of Premiere Pro (downloaded two months ago), I was able to export with preset HD 720 p H.264 QuickTime files.  It was very easy to do this in the previous version.

  Updated for Premiere Pro 8.0 (2014), when I try to export the same project with the same settings I see error message "codec video. incompatible in the preset current load failed ".

  When I select Quicktime, the default setting is NTSC DV Widescreen 24 p.   Attempted to export with this parameter, the result is a file that plays audio but not video.

  
  

  The system is Windows, I tried two different computers, including a with Windows 8, same result. I tried Media Encoder, same result.

  
  

  I searched the forums for an answer, the new features page lists these presets available, but they do not work for me.  Nothing else has changed on the computer, only upgrade to first 8.0 (2014)

  How to export Quicktime files in the new Premiere Pro?

  Technical support told me to solve the problem - uninstall QuickTime and reinstall the most recent version of QuickTime

• Video jumpy after export Quicktime Movie of PS CS4 Extended

  I am producing a training video for short-term work.  I created my entire movie in iMovie ' 09 and she had desperately need a few arrows and text in order to clarify some more technical aspects.  I've exported as a Quicktime from iMovie file and imported in Ps CS4 extended.

  After having finished the mounting, I chose to export my video, once again as a Quicktime movie.

  The export is complete, and when I went to see my movie, he was extremely nervous.  Watch the online time on the bottom of the Quicktime screen, I noticed that he was jumping in several intervals of seconds.  The audio sounds like normal, but kept the video freeze and interference.

  I tried to re - export the video with Quicktime Animation settings, and Frames Per Second to know.

  No difference.

  Any ideas what I am doing wrong?

  dmisita wrote:

  Marian-

  It's 50-50 live video/ultrasound gray scale clips.

  I used animation because I was told that it was the most without loss. I wanted to not double compress my video too.

  The animation codec is lossless, but it works best on the flat areas of color (like animation 2D, The Simpsons, etc.). I don't think that it handles live action or else noise. The ultrasound imaging can be quite noisy. The nervousness could be the animation codec choke in noisy real action?

  If you don't want a double-compress, you should worry about compression far upward flow. Looks like iMovie gives you already a highly compressed h.264. You could try exporting from iMovie to the highest possible bitrate video (= less loss).

• Keynote video export: horrible!

  Hello! Gurus of the keyNote:

  I bought a MacBookAir 15 months ago. I found myself having the iWorks Suite. Currently! They, completely updated, run on Mac OSX 10.10.5.

  I know that PowerPoint. Now! I am KeyNote. I was shocked: the last KeyNote offers almost no "granular control" for Audio & video settings in the export of "MP4" or "MOV" or "M4V"!

  I looked on the Web, the possible solutions. Most are on older versions of KeyNote. Nothing is "conducive" to the last.  My Simple Setup: 50 RGB PNG images. 1920 x 1080. 150 seconds Audio ClipFade Transition 3 seconds between slides. Export to 'MP4' 720 p & 1080 p. Audio H.264.My test export was too poor quality to show everyone.

  Help! Please, I beg you! Happy new year!

  KennyNyNy

  Export Quicktime we options for H264 and Apple Pro Res which is a professional standard Broadcast recording and editing CODEC.

  ProRes 4444 welcomes transparency and is a uncompressed CODEC

  

  Audio in H.264 format.

  H264 is a video CODEC, not an audio CODEC.  Audio is encoded in AAC format using the export Quicktime.

• Troubled video export - CC animate Adobe and Adobe Media Encoder

  After you have created a simple animation in Adobe animate CC, I want to export to a video file. Given that the export will result in one. MOV file, it requires Quicktime.

  But I get messages from the CC animate and Adobe Media Encoder that the file is unusable, see attached screenshots.

  

  

  

  Is it because that I Don t have Quicktime installed on my computer?

  And one more question: as Microsoft announced that Quicktime player is a risk to security, how can we, who uses a Windows platform, use CC animate it s potential, if Quicktime is required as support software?

  Is it perhaps other ways to convert your animation animate CC for a MP4 or other formats, to breast to animate it CC?

  What other software do I need to convert a video animation file?

  Hardware and software:

  HP laptop

  Microsoft Windows 7 Enterprise

  Intel Core i7 - 4800MQ CPU 2.70 Ghz

  16 GB memory

  How works the video export is incredible. It can control how the code real time based animations are rendered. It is not surprising that he needs QuickTime to render so well. I think that for now you don't have a choice but to install QuickTime.

  The latest QuickTime Player may have security problems may relate more to XP users. The issue in the news was reported in November and January, Apple released version 7.7.9, to deal with the issues who read as they are the same ones. But this version is not compatible with XP.

  As you are on Windows 7, you can install the 7.7.9 version and be pretty up to date with security patches. If new questions rise, and suppose that Apple do not release a patch, make sure just that QuickTime is not configured to be Media Player by default and not go search the web looking for examples of QuickTIme sequences that are on questionable web sites.

  In your Animate/video workflow, you have no reason to open QuickTime Player itself, or to be sequences QuickTime viewing in a browser, so I'm sure that you'll be safe.

  Another tip, the default export quality is average. If you put this line of code in the first frame of the timeline:

  internship. Quality = "best";

  the video quality will be much better. In addition, putting bitmaps to be lossless and allow smoothing. Even if the SWF from the scene becomes too demanding play, the exported video will be perfect.

• transparent video in Flash 8 Pro

  Hi all
  
  I'm having a problem by creating a transparent video in Flash 8 pro for use on a web page.
  I want to do is to have a web page that has a video on it (using Flash) of a person walking on the page, but the majority of the video is transparent and the only part that you see is the person walking around.
  I know you've seen examples, as shown on the website of Studio 8:
  http://www.Adobe.com/products/Studio/experience/
  This example shows a large site entirely in Flash, but you can still accomplish all of this without the entire site in Flash.
  
  The way I understand the process (in a nutshell) be is like this:
  (1) turn the video on a green screen
  (2) import video video editor (I happen to have only adobe elements 2.0 at my disposal first)
  (3) remove the green of the video which should create an alpha channel
  (4) video export
  (5) video import in Flash choose custom options and specifying the On2 VP6 video codec, and check the box "encode alpha channel.
  (6) to publish your videos and the web page from flash and view on the web
  
  I did everything above, but when I finally see my video on the web, or through Flash, I still have a bunch of black background. (The scene of the flash document background is white too, btw.) It seems that I'm not clearly define the alpha channel in the video or the format that I use does not support an alpha channel. I can't understand. I tried to export the video as .avi and .mov, but neither one import in Flash w / transparency. I can't find anything that explains how do this any more either in the documentation for Flash or Premiere or on the web.
  Can anyone help?
  
  Thank you
  VIC

  Good, solved my problem.
  This can be applied to other video editing software, but I found that it works in Adobe Premiere (Pro and elements).

  The problem is that after I had removed my green screen of the video, I wasn't not choose the right options in the export.
  You should export .mov and in your export movie settings, make sure that "Compressor" is set to "Animation" and the "color depth" has the value "million + colors ', NOT 'Millions of colors '. It is the key element to make the transparent video once you import it into Flash.

  For a good tutorial on the entire process, see this:
  http://www.communitymx.com/abstract.cfm?cid=8F805

  Just thought I'd share.
  VIC

• El Capitan crashes when watching the videos on QuickTime Player

  Hi all

  I faced a problem while watching the video on QuickTime Player. I'm not in streaming video. The video is in my SSD. Looking to halfway through my Mac suddenly freezes. I tried to press the touch Trackpad Force but nothing happens. The comments of tactics is absent. It's like the trackpad has been disabled. The screen is always on but the video is blocked right of the stage when my mac started to freeze. The sound of the video is still there. I tried to force the application to quit by using the keyboard shortcut, but nothing helps, it is not helped. The last resort, that I took is to press the power button for about 30-40 seconds before my mac stops completely. Can I know the reason behind this? And what steps should I take?

  Thank you.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter "BOOT_TIME" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the BOOT_TIME message that corresponds to the last boot time when you had the problem. Now, clear the search box to display all messages. Select those recorded before starting, during the time that something unusual was happening. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  For example, if the system is unresponsive or unable to stop for three minutes before you forced a reboot, post the timestamped messages within three minutes before the start time, not after. Please include the message BOOT_TIME at the end of the extract from newspaper - not at the beginning.

  If there is a long series of messages, please post only one example of each. Do not post of many repetitions of the same message.

  When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Step 2

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A crash report has a name that begins with the name of the process crashed and ends with ".crash". A report of panic has a name that begins with "Kernel" and ends with ".panic." A report of stall stop has a name ending with ".shutdownstall". Select the most recent of each, if any. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot. It is possible that none of these reports exist.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  If you don't see any report, but you know, there was a crash or panic, you can have selected diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• How can I get rid of the black box around my video exported?

  How can I get rid of the black box around my video exported?

  Specify the name of the program that you use, so a moderator can move this message to the correct forum

  This Cloud forum is not for help with problems of program... program would be Photoshop Lighroom or Muse or?

• How to make a video exported always matches what is shown in the window of the program?

  I try to export several videos HD 1080 p for YouTube, nothing will do, often get weird proportions and still get black bars on the sides or the bottom and top (sometimes with the same rendering settings) in the final exported video.  The problem that I am facing has a very clear expected result with the following:

  • Export EXACTLY what is shown in the window of the program
  • Have the appropriate settings for the video good exported any standard modern computer screen (although this resolution can be)
  • Have the right settings for any project to export a 1080 p video that FILLS the screen in full screen
  • Have the exported video not stretch, scale or decreases in quality
  • Be able to use this project as a "Preset" for all of my future videos

  Whatever my current settings, what I need to do to make sure an exported video remains at its highest quality while also never showing black bars?  I'm ready to start a new project from scratch if I need to.

  Additional information:

  • I'm new to this software, using the free 30 day trial of Adobe first Pro CC 2014
  • I use images from sources that are larger than what is shown in the project window.  For example, I stepped up a rectangular background image so I could animate the rotation without revealing the empty corners in the video.

  I suppose that when a video is rendered, it flush with all source material that is not in the frame.  If this is the case, why are the exported videos different from what is shown in the window of the program and make preview?  Thanks in advance for your help.

  The sequence settings say:

  Preview file format: I-Frame only MPEG

  Codec: MPEG I-Frame (out parameters)

  Width: 1920

  Height: 1080

  However, it seems that doing a new project and everything again after setting parameters of the sequence to what I had before some fixed my problems.  Now, the program window corresponds to the export preview and export correctly.  However, this does not identify what caused the problem.

  As far as I can tell, it's a glitch in Adobe Premiere caused by importing a source file, exporting in the wrong resolution (32: 21), then trying to change the resolution and export again in the same sequence.  For anyone else facing this problem in the future, make a new project, set up the correct resolution (16:9) in sequence settings and THEN export.

  Thank you all for your help!

• Subtitles do not appear when I play my video exported with first Pro CC

  So, I've spent some time cela, but can't seem to get anywhere.  I'm relatively new to Premiere Pro and I created a sequence with captioning.  I tried to export several different ways (Quicktime, H264, etc.).  I was also careful to include a subtitling sidecar file or to incorporate subtitles into the video when you export using Quicktime.  I was also sure that the two files (the film and the SCC file) are in the same place.  I tried different versions of the video exported using Quicktime Player and VLC, but had no chance to get the subtitles to appear.  In Quicktime player I've tried it with active captioning, but this does not seem to make a difference.  In VLC, I tried the Advanced Open option which allows you to select the subtitle file, that you want to load with the film.  Once again, no luck.  I tried to drag / drop the file *. CSC on the movie then it plays.  I tried to select a subtitle track using the drop down below the video.  Once again, no luck.  I tried exporting the file as a .mcc of Premiere Pro and that no longer works.  I even tried to convert the file *. CSC to .srt app file online.

  In any case, I'm stumped.  All I want to do is get my film to play with subtitles with a simple application.  Any help would be appreciated.  Thank you.

  S. @@

  Sorry, Fritz. It's been a while since I really look to the help page of captioning, and I just assumed that the workflow new legend is covered here. And a second apology because the State of this page is at least partly my fault insofar as I promised our technical editor months ago that I would expand this page.

  You don't do something wrong when it comes to set the start and end for legend blocks. In the timeline panel, legend titles are basically only display. The apparent handles are really just indicators; they are not interactive. I think it's our road map to make them interactive, but I have no idea wherever improvement is in the order of precedence.

  I'm not sure what you mean about "each caption track block [being] limited to a little more than 30 seconds. If there is a maximum of a clip of the legend, it is probably 12 or 24 hours. I have worked with many that are more than an hour. With respect to the individual legend within clip blocks, my memory has grown blurred in the months since I worked on the feature, but I think that the program does not impose a limit on the duration, you can give a block. However, there may be a limit on how long a given legend block will be actually are displayed. I thought the limit was 15 seconds, but I just did a test with blocks of 10, 20 and 40 seconds, and each of them had completely given duration in the encoded output. Maybe the limit that I think is a specific standard... Come Monday, I'll have to check with colleagues who remained close to all of the features.

  Note that if you add a caption element in a sequence until you have finished adding blocks, then you will need to cut the clip after increasing its duration by adding blocks.

  Finally, although the first creation of the legends from scratch media feature set was designed mainly to import captions created in a tool of creation of third party and, if necessary, revise the content and control the synchronization.

• bug in fireworks CS4 at 24/32-bit with alpha transparent png export?

  Hello

  I recently upgraded to CS4 from CS3 and am very disappointed that the ease of export png to 24 or 32 bit png is then useless on my installation of fireworks (Vista). I have a colleague who reported the same behanviour on his mac.

  Please see this file png native fireworks CS4 and the attempt to export it as 24 or 34 bit png, ensuring the canvas is transparent (it shuold be already)...

  http://www.capitalh.NET/demo-bug.PNG

  The visualization mode in CS3 would show the png with its alpha channel, indicated by the transparency checkerboard. Exporting as well would produce the desired result > a PNG with an alpha nice mix channel.

  Viewing in preview in CS4 mode displays an horrible rendering of the image on a white background. Export the image gives the same result. Please see this link for confirmation:

  http://www.capitalh.NET/demo-bug-export.PNG

  Please also see this simple image, this time using a simple ellipse shape:

  http://www.capitalh.NET/demo-bug-export-SimpleShape.PNG

  You will notice that it is not transparent, and the ellipse has not been smoothed.

  Anyone can shed light on this behavior?

  Export of png as such is something I do every day at work, and is a fundamental requirement of an image editting application targeted to web site design.

  I'm doing something wrong? I been using Fireworks since 2003 so I'm inclined to think that I'm not.

  Transparency is only available when the file is exported as a PNG 8 or

  PNG 32. The sample you have to downloaded has been optimized for the PNG-24 format. When

  I changed optimization PNG 32, the file exported as planned.

  The shape simple PNG file seems to be a solid image, not a vector

  ellipse. In this case, the layout optimization of PNG 8

  with index transparency has solved the problem.

  HTH

  Jim Babbage

• "video.library - ms" problem on Windows 8

  I just updated my Windows 7 for Wwindows Pro 8 a week ago. Today, I had a problem on my computer whenever I click on folder "Videos": -.

  "Videos.library - ms problem" no longer works
  This library can be removed safely from your computer. Will not suffer folders that have been added.
  The same problem arises when I click to the file 'Documents', 'Music' and 'pictures '. Can someone help me solve this problem?
  
  

  Both pis MS can' enhance the first simple solution, I found HERE:

  http://www.Lockergnome.com/Windows/2011/12/20/how-to-fix-the-Pictrues-library-MS-is-no-longer-working-error-in-Windows-7/

  the solution is TOO easy, so MS can't offer.

  stuck on top of the link (and is this PATCH for Windows 7, but I just used it and I am more happy and content.)

  • Open computer in the Start Menu.
  • Check that the libraries are the opening is no longer by double-clicking on them in the sidebar.
  • Click libraries broken in the sidebar, and then select delete. This will not delete your files, just the link to the library in the sidebar itself.
  • Once broken libraries are deleted, right-click on the main library folder in the sidebar and select restore default libraries.
  • Check that restored libraries are working properly by opening each one.

    ZM

• That theatrical video export settings, should I set up?

  That theatrical video export settings, should I set up? For example, what kind of parameters the creators of "Deadpool" and "Hail!" Cesar"used for their photos?

  Hey there! I mean the first pro CC 2015. I thought I was in the forum program.

  Two copies... Locked... What the theatrical video export settings, I should put up?