Treatment - how to drop a field in different areas

Similar Questions

• How to make the field 'Description' biggest area? (3 to 4 lines in height compared to the present 1 line)

  I'm guessing that in CSS or HTML in the Editor of Landing Page I can do form field seems bigger than just the single line. Ideally, I would like to than the text about 3 to 4 rows height box.

  Please help me solve this problem! Means the simplest would be the best, but I'll take any answer at this stage.

  Thanks Topliners community!

  Figured out that you go to "Custom Fields" then hit paragraph box and replace the HTML name, as well as card in the stages of treatment, in the field "Description". PM me if you want more details and this has been a concern for you as well.

• How to disable the field in the drop-down list to enter a value

  I got a box dropdownlist field and previously a few numerical values on her list:

  say a list of page numbers,

  11

  22

  33

  41

  42

  43

  52

  ..

  I put codes on the change event so that once the user clicks on an element, it is directed to the specific page immediately.

  But the case is that some users would like to enter the field and type a number rather than clicking.

  If he tries to type 42, change event will get him on page 41 instead (as the 1 '4' tank is put in correspondence),

  and then accidentally edit a field then put the tank rest '2' on it.

  so, how can I disable tapping on a drop down field?

  Rgds.

  Hello

  If you select the drop-down list and go to object > field palette. Here you can uncheck "allow customized entry. This will prevent the user to type in the drop-down list.

  With the drop-down menus, I prefer script to the exit event.

  Good luck

  Niall

  Ensure the dynamics

• How to make the fields from the drop-down list required to make a selection before you save a PDF file

  I have a PDF form where I entered a JAVA script in some areas by using the option ON BLUR under 'Actions' and it works very well to prevent users to go to another site if they leave the field with the empty JAVA Script in place.

  My question is that I have other form fields that have a drop down menu where they can choose several options. I would also like to make these fields to where they can't move forward on the form unless they choose an option in the list. However, because with the option in the list "choose a ' is a default option entered into the field (field is not empty), script JAVA of BLUR ON option I used in my empty fields does not work to block the user to move beyond the matter without selecting an option. They are able to save the form with all the drop down menus staying to 'pick '.

  I made the field "Required fields" then they are highlighted with the red area around, but is there another tool to force them to choose an option for each in the drop down menus before you save the form, instead of being able to save with leaving the 'choose One' in the field by default?

  The best way to do this without knowing the default value of the field is to compare the value of the field to the default value of the field... You must make sure that your default value is not part of the possible acceptable answer. It works with most of the field types that a user can fill.

  If (event.value! = event.defaultValue) {}

  do something;

  App.Alert ("required field not completed. \nField name: "+ event.target.name, 1, 0);

  }

• How to copy formats to easily different text fields?

  I am a new user of Acrobat Pro and I'm very frustrated that he doesn't seem to be an easy way to apply the same format (number, percentage, etc.) in a variety of fields of text at the same time.  When I select a number of areas, the option "Format" disappears in the 'Properties' dialog box and I have to go to each field to change the properties individually.  How can I select a number of areas and apply the same properties of Format for each of them at the same time?

  Thanks for your help!

  You can not. When you do this a lot, you end up using strategies that need is reduced to the minimum. For example, when you create a large number of date fields, first put in place a field the way you want to copy, paste, and rename to create other date fields. Or you can use the right click > feature up several fields after the first configuration of the field as you want. Another option is to use JavaScript, which is relatively easy if the domain names of the existing fields makes it easy to reference them in a loop (for example, date.1, date.1, date.2,... date. 100). You just know that Acrobat uses for JavaScript in the key events and Formats to a particular format.

  I'm not sure what their reasoning is to not allow multiple fields to stare directly at the same time, but it would make a good feature request. I know the other have asked before.

• How to set a field in a form of DML to only display?

  It seems that it would be obvious, but I can't figure out how to set a field in a DML form read-only.  Thanks for all the ideas.

  The most obvious thing is to define the type of item to display only. Save Session State to Yes if the value of the item is required in after not submit treatment or if the value is only for display on the page.

  Alternatively, if you want the element to appear as a normal text control, but do not be modifiable, set the item text field and the custom attributes type to readonly .

• How to Auto poplulated fields of index for scanning profiles

  
  Hello

  I worked on Webcenter Capture 11.1.1.8.0, we have recently configured profiles customer capture and we have also set up Email profiles and analyze the profile.

  My concerns here, how to index get fields automatically filled for individual profiles of customers during the analysis of the images of the invoice.

  currently I feed the index on manual work fields. We want to avoid the manual work and it must be filled by full Auto the index fields in the analysis of the invoice for each individual customer profiles. Different index values should appearance for differnent customer profiles.

  the above requirement, is there configure everything can be done in Capture console. We must make this resolution with Console to capture only not to provide all the scripts. We do not want to use Scripts for this requirement.

  Please help me. This something urgent for the business scenario.

  If your question is: "How can I apply different default values of metadata based on the customer profile?" then I think that you will have to do so via the import processor (if you use is not a scanner), recognition or scripts custom.

  You can set up a default for each metadata field, but this won't cut it for you.

  You can probably do this through recognition jobs processor by creating a different one for each customer profile and defining your customer post-processor on his work of processor rcgn correspondent.

  Hope this helps,

  -ryan

  Sound clips SENA

• How to fill a field of date with today's date when the signature field is signed?

  How to fill a field of date with today's date when the signature field is signed? In the LCD, I insert a signature field and a date field, what parameters in these two fields are necessary to make this work? Is the date field, the value calculated? I tried different JS suggestions I found, but none work. In the form, I named the signature ClaimSignature field and the date in the ClaimSigDate field.

  The thought of her with a little help. In the script editor window, I selected the postSign event and added the following JS:

  Form1.Page1.ClaimSignature::postSign - (JavaScript, client)

  var date = new Date();

  var day = date.getDate ();

  var month = date.getMonth () + 1;

  var monthstring = (month, 10?) ('0' + month: month)

  year var = date.getFullYear ();

  var = year DateString + '-' + monthString + '-' + (day< 10="" "0"="" +="" day="" :="">

  ClsimSigDate.rawValue = dateString;

  I hope this helps someone else save time.

• How to reference a field added to dynamically

  I'm trying to set the value of a field that was dynamically added as part of a section of the table and I can't figure out how.

  The section of the table is added by clicking on a button that works very well. I can access any field value in the section of the table that owns the instance of '0'. But I can't seem to understand how to access the field values for all other instances of this section of the table.

  This is the hierarchy of one of the fields:

  TopmostSubform.Page4.DeveloperIdSubform.DeveloperIdentityTbl.MemberSection.Row8.dteFormedD ateDevMem

  Where "MemberSection" is the section of lines button will add an instance of. Now I can access the value of the field date from the first instance of "MemberSection" by the following:

  DeveloperIdentityTbl.MemberSection.Row8.dteFormedDateDevMem.rawValue

  If I want to do the same thing to say for instance 'MemberSection' 3rd, how could I do?

  Thanks for the help!

  Marc

  Hello

  WhyIsThisMe is correct. You need to reference the instance of repetition "MemberSection" by its index. If not (as you did) it will default the 1st instance.  Sounds easy, right? Well...

  Actually, depends on the scripting language you have chosen. The syntax of the actual function used to formCalc and javaScript is considerably different.

  The WhyIsThisMe reference:

  TopmostSubform.Page4.DeveloperIdSubform.DeveloperIdentityTbl.MemberSection [2]. Row8.dteFor medDateDevMem

  should work for formCalc, but it will not be for javaScript. To do this, you need to use resolveNode()

  /////////////////////////////////////////////

  INDX var = 2;  you will probably select a different line in different circumstances, right? For example, to assign the index value to a variable

  or on the contrary

  var indx = 0;

  If (condition) {indx = 2 ;}

  If (condition) Else {indx = 3 ;}  you get the idea

  ////////////////////////////////////////////

  Then, you would do the assignment of the value using resolveNode() by the construction of the chain that goes inside the ():

  xfa.resolveNode ("TopmostSubform.Page4.DeveloperIdSubform.DeveloperIdentityTbl.MemberSectio n [" + indx + "]..") RawValue Row8.dteFormedDateDevMem")

  /////////////////////////////////////////////

  you build a string in javaScript, so the + is used. There are 3 parts of the final string for the resolveNode().   finalString = "part1" + indx + «part3»

  ////////////////////////////////////////////  Still with me?  I usually opt for formCalc when referencing instances, as it is generally more forgiving

  FormCalc, 1 assign an index value to variable.

  var indx = 0;

  If (condition) then

  INDX = 2

  else if (condition) then

  INDX = 3 //you get the idea

  endif

  Then use this variable to refer to the instance of / / "MemberSection" resolveNode() is necessary in formCalc

  TopmostSubform.Page4.DeveloperIdSubform.DeveloperIdentityTbl.MemberSection [indx]. Row8.dteF ormedDateDevMem

  ////////////////////////////////////////

  Good luck!

  Stephen

• How to set the field "default" of a quick dashboard to yesterday?

  Hello world
  
  I have a dashboard the guest on a date (full name Date.Date and type Date).
  I also have a simple report with two columns: Date.Date and a measure (whatever the name).
  
  I've managed to filter the day before the current date in the report by adding an advanced SQL filter:
  Date.Date = Cast (TimestampAdd(SQL_TSI_DAY,-1,@{system.currentTime}) as Date)
  
  Now, I would like to invite him to select the day before the current date by default.
  The filter on Date.Date would be "invited" or more.
  
  How to set the field "Default" from the command prompt?
  
  Thanks in advance

  Hello

  go to the command prompt...
  Select SQL results of as default: drop-down list.
  here... you have to write your SQL logic...
  who uses by default the previous date
  something like that...

  * Select case when 1 = 0 then anydate column of another timestampadd (sql_tsi_day-1, CURRENT_DATE) of the end SubjectArea name*.

  write like this... and report back...

  Thank you & best regards
  Kishore Guggilla

• an alphabet by typing in a cell gives drop down suggestions from previous hits on the same column. But how the drop down to choose the suggestions of the other columns and other sheets.

  an alphabet by typing in a cell gives drop down suggestions from previous hits on the same column. But how the drop down to choose the suggestions of the other columns and other sheets.

  Hi mdsavol,

  Your observations are accurate. The 'suggestions' are previous entries in the same column that correspond to what has been entered so far in the active cell. The only direct user control is to activate the function turn on or off in numbers preferences > general.

  There are other ways to include or exclude items of suggestions:

  • To remove typos in the suggestions list, the user must correct the typos in the cell above the active cell. If they are more in the list, they won't be presented as suggestions.
  • To include selections added to the list, the user must enter these suggestions in the individual cells above the active cell and column where they are wanted as suggestions.

  There was a request here a while there is a list of suggestion 'live' similar to those of some websites, which offers a descending list of possible entries as a type in an input box.

  The only way I see to reach a solution similar to what you have asked is to use as many lines at the top of the non-en-tete of the table section to list the items likely to repeat in your table, and then hide the lines. You'll need a list for each column where you want to use this feature with a list previously planted. Existing items will then require a likely hit up to three, then a click to choose from a list small enough to enter a value into a cell. News he will need to enter in full the first time, but after that it will be put on the list and answer the same thing as the terms preseeded.

  While your setting upward (or decide not to do), consider going on the menu of number (in numbers), choosing to provide feedback from numbers and writing a feature in Apple request. Describe what you want. Explain how he could help the average user numbers, and then hope for the best.

  Kind regards

  Barry

• How can I dictation in 2 different languages?

  I have conversations of messages with friends from different countries and different languages. How can I use dictated in different languages?

  Hello

  On your Apple Watch, after tapping on answer, press firmly on the screen, and then tap on choose language to a different language for your reply (including the dictation).

  The default language for any given conversation is on the same language as the active keyboard on your iPhone (in Messages) for this particular conversation. When you change the language of the keyboard for this conversation on your iPhone, it also changes on your Apple Watch.

  To change the language for a chat on your iPhone (and also on your watch):

  • Lock your iPhone (press the Sleep / Wake button briefly).
  • Open the conversation with this contact on your watch and press on answer.
  • On your iPhone, press the Sleep / Wake button briefly to display the lock screen.
  • The lower left corner of the lock screen, drag upward on the Messages icon (where transfer icons appear).
  • This will open this conversation in Messages on your iPhone.
  • Press the symbol of the globe by the SPACEBAR on the keyboard of the iPhone and choose your preferred language.
  • Start typing a response on your iPhone (one or more characters), then delete (implements the choice of language of keyboard for this conversation).
  • On your watch, in the Messages application, exit the screen to answer.
  • Start a new response when this conversation - the new language will be used for dictation and short answers in this conversation.

  More information:

  Use Dictation on your Apple Watch - Apple Support

• How to get the "Run as different user" option using the context Menu

  I work with the domain environment and use os win 7 but it do not display "run as user deffrent' so, how get the"Run as a different user"option using the context Menu, share pls burned discription.

  (also try pressing shift + right click but nothing else)

  Atul Rai

  E-mail address is removed from the privacy *.

  May be of help to the: http://www.sevenforums.com/tutorials/155532-run-different-user-without-shift-right-click-context-menu.html

• How to add new fields of contacts and accounts?

  How to add new fields of contacts and accounts?

  You can use 'Fields' and 'View '.

• How can I add white space between areas that contain text fields? I use Adobe Acrobat Pro DC 2015.  I'm trying to change an existing PDF. I need to add white space between areas that contain text fields to allow these text fields to be developed and not

  How can I add white space between areas that contain text fields?

  I use Adobe Acrobat Pro DC 2015.

  I'm trying to change an existing PDF. I need to add white space between areas that contain text fields to allow these areas to be developed and do not overlap the text and the text below fields.

  For example:

  1. 1.

  Progress/strategies:

  1. 2.

  Progress/strategies:

  1. 3.

  Progress/strategies:

  1. 4.

  Progress/strategies:

  The space between each 'progress/strategies' increasing needs. A text field is under each of them. If it's a Word doc, I could just press on enter. What is the best way to do this with Adobe Acrobat Pro DC?

  There is no easy way to do it. You need to move the text fields more apart and if there are static elements, then you will need to use the tool edit text & Images to move them, separately.