Trigger on the first attempt

 I'd like some help / advice on my LabView program (attached) please. In the VI, the MyVoltageTask_1 is configured as a voltage signal corresponding to a pressure change inside an enclosed cylinder. The signal is transmitted to the BNC 2110 DAQ board / PCI 6133 DAQ card via a differential pressure transducer. 

Ideally, the program should trigger as soon as I let air into the cylinder and start acquiring data, and stop as soon as its done. However, LabView does not trigger when I let the air into the  cylinder on the first attempt, but if I exhaust the air and let it in again a second time, the program triggers and I can see a graph of the pressure trace. Please let me know if there is something I should / could change in the program to have the program trigger on the first attempt. Thanks!



 
         
        
 
         
Have you try to change the slope falling upward? I begin to take a look at shipping the first examples. "" "Open Finder for example of OR and go to hardware input and output" DAQmx "analog measures" voltage. Take a look to the example called "Acq Cont & chart voltage-Int Clk - Analog Start.vi ' I contains the basic structure of what you're trying to reach.
 
         
 
         
 
 
		 
 Tags: NI Software
 
         
         
 
          
Similar Questions
 
          
     
            
           
  •  
		     
    When I select print the printer responds but does not print on the first attempt.
     
			 
    I have a printer HP psc 2170 and when I select print the printer responds but will print on the first attempt. It will start and then it is as if she is not detecting or responding and take up to 3 pages before it will print completely. I went back and set the parameters by default, unplugged the printer for a while and reconnected with no luck. Does anyone have ideas to help me solve it?
    			 
    Hello
    

    1. what version of Windows is installed on the computer?
    

    I suggest you to follow these steps and check if that helps:
    

    Method 1:
    Try to run the printer Troubleshooter and check that if it helps, here is the link:
    
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
    

    Method 2:
    Try to run the below fixit and check if this may help:
    
    http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
    

    It will be useful.
    		   
    •  
            
           
  •  
		     
    ACS 5.1 omitting the first attempt for the user
     
			 
    Hi all
    

    I am facing a problem, a strange problem with the ACS. I use 802. 1 x on my network to authenticate users. I found that when I connect my network cable and put my authentication credentials will fail directly. I turn off my connection and will again and apply the same credentials, it works perfectly. I don't know why for the first attempt, it will fail the authentication and it will tell that (24217 host is not in the internal host identity store). You can see the table below showing the first attempt failed, but the second attempt successful for the user (testuser).
    

    


    
DEC 6, 10 PM 1:31:11.656


-
testuser

                00-12-AE-7A-69-N6
            

                Default network access
            
PEAP (EAP-MSCHAPv2)

                Dot1x-3560-Switch
            
1.2.3.4
FastEthernet0/8


                TESTACS
            


    

    
DEC 6, 10 PM 1:30:43.393



testuser

                00-12-AE-7A-69-N6
            

                Default network access
            
PEAP

                Dot1x-3560-Switch
            
1.2.3.4
FastEthernet0/8


                TESTACS
            

                24217 l'hôte ne se trouve pas dans le magasin d'identités hôtes internes.
            




    Please find the picture as an attachment to the (sequence of identity store)
    

    Any help is appreciated
    

    Thanks in advance,
    			 
    Hello
    

    in your sequence of identity store, I would suggest that you remove everything from the text box below, called "recovery of additional attributes.
    

    Nicolas
    

    ===
    

    Remember responses of the rate that you find useful
    		    
            
           
  •  
		     
    Any error page after VO extending only on the first attempt to load the page
     
			 
    Hi people Oracle,.
    I have successfully expanded a VO and have used the new column of data/on the page/oracle/apps/per/dor/webui/DocsOfRecordForPersonPG. However, when I navigate to/oracle/apps/per/dor/webui/DocsOfRecordForPersonPG, I get this error JUST at the first attempt:
    Error page
    You have encountered an unexpected error. Please contact the system administrator for assistance.
    Click here for exception details.
    If I click on the 'BACK' button and select again the link to access the page/oracle/apps/per/dor/webui/DocsOfRecordForPersonPG, the page is loaded successfully.
    Note that there are several ways to navigate to/oracle/apps/per/dor/webui/DocsOfRecordForPersonPG and this only happens on a navigation path.
    Has anyone experienced this problem before? Any help is greatly appreciated.
    Error message carried by Oracle:
    <!-StartFragment--> to oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:912)
    at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1169)
    at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1435)
    at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2684)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1949)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:549)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:437)
    at _OA._jspService(_OA.java:212)
    at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
    at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:390)
    at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
    at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
    at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
    at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
    at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:642)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:911)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
    to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:619)
    # # 0 in detail
    java.sql.SQLException: invalid column type
    at oracle.jdbc.driver.OraclePreparedStatement.setObjectCritical(OraclePreparedStatement.java:8516)
    at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:8034)
    at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:8767)
    at oracle.jdbc.driver.OraclePreparedStatement.setObject(OraclePreparedStatement.java:8748)
    at oracle.jdbc.driver.OraclePreparedStatement.setObjectAtName(OraclePreparedStatement.java:11907)
    at oracle.jdbc.driver.OraclePreparedStatementWrapper.setObjectAtName(OraclePreparedStatementWrapper.java:815)
    at oracle.jbo.server.OracleSQLBuilderImpl.bindParamValue(OracleSQLBuilderImpl.java:3966)
    at oracle.jbo.server.BaseSQLBuilderImpl.bindParametersForStmt(BaseSQLBuilderImpl.java:3335)
    at oracle.jbo.server.ViewObjectImpl.bindParametersForCollection(ViewObjectImpl.java:14008)
    at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:804)
    at oracle.jbo.server.QueryCollection.executeQuery(QueryCollection.java:669)
    at oracle.jbo.server.ViewObjectImpl.executeQueryForCollection(ViewObjectImpl.java:3754)
    at oracle.jbo.server.OAJboViewObjectImpl.executeQueryForCollection (unknown Source)
    at oracle.apps.fnd.framework.server.OAViewObjectImpl.executeQueryForCollection(OAViewObjectImpl.java:4560)
    at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:743)
    at oracle.jbo.server.ViewRowSetImpl.executeQueryForMasters(ViewRowSetImpl.java:892)
    at oracle.jbo.server.ViewRowSetImpl.executeQueryForMode(ViewRowSetImpl.java:806)
    at oracle.jbo.server.ViewRowSetImpl.executeQuery(ViewRowSetImpl.java:800)
    at oracle.jbo.server.ViewObjectImpl.executeQuery(ViewObjectImpl.java:3674)
    at oracle.apps.fnd.framework.server.OAViewObjectImpl.executeQuery(OAViewObjectImpl.java:439)
    at oracle.apps.fnd.framework.webui.OAWebBeanBaseTableHelper.queryDataInternal(OAWebBeanBaseTableHelper.java:1278)
    at oracle.apps.fnd.framework.webui.OATableHelper.prepareForRendering(OATableHelper.java:484)
    at oracle.apps.fnd.framework.webui.beans.table.OATableBean.prepareForRendering(OATableBean.java:1220)
    at oracle.apps.fnd.framework.webui.OAWebBeanTableHelper.processRequestAfterController(OAWebBeanTableHelper.java:203)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:662)
    at oracle.apps.fnd.framework.webui.OAWebBeanTableHelper.processRequest(OAWebBeanTableHelper.java:2144)
    at oracle.apps.fnd.framework.webui.beans.table.OATableBean.processRequest(OATableBean.java:1035)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:976)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:943)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:663)
    at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
    at oracle.apps.fnd.framework.webui.beans.layout.OAStackLayoutBean.processRequest(OAStackLayoutBean.java:350)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:976)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:943)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:663)
    at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
    at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1183)
    at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:976)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:943)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:663)
    at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
    at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:976)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:943)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:663)
    at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
    at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
    at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2629)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1949)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:549)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:437)
    at _OA._jspService(_OA.java:212)
    at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
    at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:390)
    at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
    at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
    at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
    at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
    at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:642)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:911)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
    to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:619)
    java.sql.SQLException: invalid column type
    at oracle.jdbc.driver.OraclePreparedStatement.setObjectCritical(OraclePreparedStatement.java:8516)
    at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:8034)
    at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:8767)
    at oracle.jdbc.driver.OraclePreparedStatement.setObject(OraclePreparedStatement.java:8748)
    at oracle.jdbc.driver.OraclePreparedStatement.setObjectAtName(OraclePreparedStatement.java:11907)
    at oracle.jdbc.driver.OraclePreparedStatementWrapper.setObjectAtName(OraclePreparedStatementWrapper.java:815)
    at oracle.jbo.server.OracleSQLBuilderImpl.bindParamValue(OracleSQLBuilderImpl.java:3966)
    at oracle.jbo.server.BaseSQLBuilderImpl.bindParametersForStmt(BaseSQLBuilderImpl.java:3335)
    at oracle.jbo.server.ViewObjectImpl.bindParametersForCollection(ViewObjectImpl.java:14008)
    at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:804)
    at oracle.jbo.server.QueryCollection.executeQuery(QueryCollection.java:669)
    at oracle.jbo.server.ViewObjectImpl.executeQueryForCollection(ViewObjectImpl.java:3754)
    at oracle.jbo.server.OAJboViewObjectImpl.executeQueryForCollection (unknown Source)
    at oracle.apps.fnd.framework.server.OAViewObjectImpl.executeQueryForCollection(OAViewObjectImpl.java:4560)
    at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:743)
    at oracle.jbo.server.ViewRowSetImpl.executeQueryForMasters(ViewRowSetImpl.java:892)
    at oracle.jbo.server.ViewRowSetImpl.executeQueryForMode(ViewRowSetImpl.java:806)
    at oracle.jbo.server.ViewRowSetImpl.executeQuery(ViewRowSetImpl.java:800)
    at oracle.jbo.server.ViewObjectImpl.executeQuery(ViewObjectImpl.java:3674)
    at oracle.apps.fnd.framework.server.OAViewObjectImpl.executeQuery(OAViewObjectImpl.java:439)
    at oracle.apps.fnd.framework.webui.OAWebBeanBaseTableHelper.queryDataInternal(OAWebBeanBaseTableHelper.java:1278)
    at oracle.apps.fnd.framework.webui.OATableHelper.prepareForRendering(OATableHelper.java:484)
    at oracle.apps.fnd.framework.webui.beans.table.OATableBean.prepareForRendering(OATableBean.java:1220)
    at oracle.apps.fnd.framework.webui.OAWebBeanTableHelper.processRequestAfterController(OAWebBeanTableHelper.java:203)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:662)
    at oracle.apps.fnd.framework.webui.OAWebBeanTableHelper.processRequest(OAWebBeanTableHelper.java:2144)
    at oracle.apps.fnd.framework.webui.beans.table.OATableBean.processRequest(OATableBean.java:1035)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:976)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:943)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:663)
    at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
    at oracle.apps.fnd.framework.webui.beans.layout.OAStackLayoutBean.processRequest(OAStackLayoutBean.java:350)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:976)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:943)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:663)
    at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
    at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1183)
    at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:976)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:943)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:663)
    at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
    at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:976)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:943)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:663)
    at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
    at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
    at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2629)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1949)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:549)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:437)
    at _OA._jspService(_OA.java:212)
    at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
    at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:390)
    at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
    at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
    at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
    at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
    at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:642)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:911)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
    to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:619)
    			 
    Make sure that the extended style of binding of the VO is positional Oracle.
    


    

    BR, 906099
    		   
    •  
            
           
  •  
		     
    How to get on board to ignore a trigger after the first time she played
     
			 
    Hi all
    I have a symbol that is activated by clicking a button.  The symbol has two triggers at various points on his script.  Each trigger activates a distinct symbol.  I want the two triggers to work the first time through, but on the second and each time, I would like to the first condition to be ignored.  There is probably a bit of code that will do this very easily (perhaps an if else statement?), but I'm afraid I'm not very good at that.  Any ideas on how to achieve this? Any help would be greatly appreciated!
    See you soon and good luck!
    			 
    Another attempt: Test-2-2 revised.zip - Box
    		   
    •  
            
           
  •  
		     
    Dialpad in 4.4.4 will not work on the first attempt
     
			 
    Hey everybody,
    


    I just updated my motorcycle with android 4.4.4 g and my unit is ok but there is a small issue. Whenever I touch the dial pad icon to dial a number, the numbering screen not coming in a first attempt. Also, I used safe mode to see if the problem is resolved, but it's the same in safe mode too. Is there any kind of bug or other problem that causes this problem? I have not any other pitcher and not had this problem before the update... Please suggest me if anyone has a solution... and also say if you are facing this problem too. I also made a video and uploaded it please look and tell me what needs to be done.
    

    Thank you
    			 
    https://forums.Motorola.com/posts/8bc108da92
    


    This issue has already been discussed in the link above. If you have disabled animations in the developer settings you get this "bug". There was not present in section 4.4.2, but for some reason it is in 4.4.4.
    		   
    •  
            
           
  •  
		     
    Customer global VPN will not connect on the first attempt
     
			 
    Global VPN Client version 4.9.4.0306.
    

    I connect to a variety of virtual private networks for clients whom I manage IT systems. When I connect to their virtual private networks via devices Sonicwall TZ in my home office, the first always uptight attempt connection, implementation service or Authenticating or IP acquisition. So I click on turn off, then immediately, click Activate, and it ends. This happens every time that I log in unless I log in no time (maybe a few minutes) after I close an open connection.
    

    I thought that it would be fair to my laptop; However, it has persisted through two or three versions of the GVPN customer and, more important still, this does not happen when I have my laptop in the office of a client with me - that from my desktop at home.
    

    So I already know that there must be something on my frontier DSL modem or a service. But it's not as if the customer VPN tells me "your modem has decided to abandon the Sonicwall response during authentication" or something like that.
    

    Are there measures of troubleshooting/diagnosis/tests of base I can try, or any configuration of particular gateway that could be suspicious. In my case, the gateway is my modem Frontier.
    			 
    Yes, it's a little different.
    

    Thank you for your participation!
    

    Chris
    		   
    •  
            
           
  •  
		     
    showPopupBehavior works only on the first attempt
     
			 
    Hi all, I am using JDeveloper 12 c and have a problem with the popup component.
    I'm passing a value from the context menu with the type of trigger being 'sender '.  When I go for the first time, the pop-up appears worthless.  When I try once again in a hover, the value appears correctly.
    I tried to change the attribute contentDelivery to all 3 different values, but nothing seems to help.
    Any ideas?  The code is below:
    Thank you
    Mike
    < af:outputText inlineStyle = "make-size: 14px;" Police-weight: normal; Color: #333; white-space: pre wrap. "truncateAt ="80 ".
    "ID ="desc"value =" #{rowItem.description} "shortDesc =" "clientComponent ="true">
    "" < af:showPopupBehavior popupId = ": fullDescription" triggerType = 'sender' align = "endAfter" alignId = "desc" / >
    < af:clientAttribute = name value = "#{rowItem.description"showDescription"}" / > "
    < / af:outputText >
    < af:popup launcherVar = 'source' eventContext = "pitcher" contentDelivery = "lazyUncached" childCreation = "deferred" id = "fullDescription" clientComponent = "true" >
    < af:noteWindow id = 'nw1' inlineStyle = "" width: 350px; "clientComponent ="true">"
    < af:panelGroupLayout layout = "vertical" >
    < af:outputText inlineStyle = "make-size: 14px;" make-weight: bold; color: #666; "value ="Description"/ >
    < af:spacer height = "5" / >
    < af:outputText inlineStyle = "make-size: 14px;" color: # value = "#{viewScope.showDescription 666"} "/ >"
    < / af:panelGroupLayout >
    < / af:noteWindow >
    "< af:setPropertyListener from =" #{source.attributes.showDescription} "to =" #{viewScope.showDescription} "type ="popupFetch"/ >
    < / af:popup >
    			 
    childCreation = 'immediate', did the trick.
    		   
    •  
            
           
  •  
		     
    Insert the record in the second table by making the trigger on the first table
     
			 I hv created 2 tables as shown below the code sql. I want to insert some record (line current value) column of the first table, next sequence value and sysdate into second table. I hv created trigger but I gave warning.
    so I want to know what is the problem in my sql code.
    Pls correct!
    

    SQL > create table myuser1 (u_id varchar2 (10), uname varchar2 (20), sex char(1));
    

    SQL > create table myuser2 (reg_no number (5), reg_date Date, u_id varchar2 (20));
    

    SQL > create the sequence myuser2_seq;
    

    SQL > alter table myuser1 add constraint pk_myuser1 key (u_id) primary;
    

    SQL > alter table myuser2 add constraint pk_myuser2 key (reg_no) primary;
    

    SQL > CREATE TRIGGER MYTRIGGER
    2 AFTER INSERT ON myuser1
    3 FOR EACH LINE
    4 BEGIN
    5 INSERT INTO myuser2 (reg_no, reg_date, u_id)
    6 VALUES (myuser2_seq.nextval, SELECT SYSDATE FROM DUAL, select u_id myuser)
    1)
    7 END;
    8.
    

    WARNING: Trigger created with compilation errors.			 
    JKMourya wrote:
    I hv created 2 tables as shown below the code sql. I want to insert some record (line current value) column of the first table, next sequence value and sysdate into second table. I hv created trigger but I gave warning.
    so I want to know what is the problem in my sql code.
    Pls correct!
    

    SQL > create table myuser1 (u_id varchar2 (10), uname varchar2 (20), sex char(1));
    

    SQL > create table myuser2 (reg_no number (5), reg_date Date, u_id varchar2 (20));
    

    SQL > create the sequence myuser2_seq;
    

    SQL > alter table myuser1 add constraint pk_myuser1 key (u_id) primary;
    

    SQL > alter table myuser2 add constraint pk_myuser2 key (reg_no) primary;
    

    SQL > CREATE TRIGGER MYTRIGGER
    2 AFTER INSERT ON myuser1
    3 FOR EACH LINE
    4 BEGIN
    5 INSERT INTO myuser2 (reg_no, reg_date, u_id)
    6 VALUES (myuser2_seq.nextval, SELECT SYSDATE FROM DUAL, select u_id myuser)
    1)
    7 END;
    8.
    

    WARNING: Trigger created with compilation errors.
    

    SELECT inside VALUES clause is NOT allowed.
    do SELECT statements before the INSERT command
    		   
    •  
            
           
  •  
		     
    The quiz settings: modification after the first attempt Action
     
			 
    Hi all.
    I'm creating a series of learning units, and each has a quiz at the end. I was asked to set up each unit so that the user gets two attempts to pass the test. If they fail on their first attempt, they go to the beginning of the unit to review additional documents. If they fail in their second attempt, an email gets automatically generated to the author of the series. Two options are available in the test configurations, but it seems to me that you cannot choose a different action on each attempt.
    Does anyone have a solution?
    Thanks in advance.
    			 
    If they fail on their first attempt, I guess that you gave them the chance to take the Quiz by clicking on the button on the Quiz results slide.
    

    When the student clicks on resume Quiz, it will return back to the first interactive object scored in the project.  This is the beginning of the scope of Quiz.  If you add a button or click on to the first slide of the project, you effectively extend the reach of Quiz so that the slide and the slide in which the learner is jumped to when they click on resume Quiz.  This behavior is usually something that confuses the Captivate newbie authors, but you can use it to your advantage in this case.
    

    This button Retake Quiz will not present AFTER their first attempt, so the only option available after the second attempt will be revision quiz on (if you allow) or click on continue to go to the next slide after the Quiz results slide.
    

    You can use the value in the cpQuizInfoAttempts of system variables in Actions Advanced conditional.  For example, you can create an advanced conditional Action that looks at the value of this variable and if it is greater than 1, perform the action to send an email.  You define this conditional Action advanced fire OnSlideEnter of the blade immediately AFTER the Quiz results slide.
    

    Be aware that sending emails of Captivate is not a completely reliable method to get report that depends on a lot of things that are working properly and that are beyond your control.  For example mail client of the learner won't react to the mailto: event or learners themselves could not send the email (you can not automatically send an email to Captivate demeaned knowledge of the learner.)
    		   
    •  
            
           
  •  
		     
    Satellite L do not turn on the first attempt
     
			 
    Hi all
    

    Whenever my laptop was turned off for a period of time when I then go to turn on my pc the NumLock, caps lock and power button all lights up but nothing happens on the screen even not the backlight lights.
    

    However, when I turn on my laptop (after pressing and holding the power button to turn the system off) it ALWAYS starts the second time with no problems.
    

    Everything is up-to-date, I even contacted toshiba support who say it could be a software problem.
    No help there.
    

    Anyone else having this problem?
    Thank you very much for your help!
    			 
    Hello
    

    First of all, you must provide more details about your laptop.
    

    Computer laptop model/series do you have exactly?
    What system is pre-installed?
    Using preinstalled Toshiba system or have you installed the operating system with your own hands?
    When did you notice this problem exactly? It seemed from the first day of purchase?
    

    By the way: do you stop the laptop or can I get the laptop into hibernation / sleep mode?
    		   
    •  
            
           
  •  
		     
    Dynamic action does not not on the first attempt to load page. Work after refreshing the page
     
			 
    4.2.1
    Hello
    I have a page with a list of selection Order_id and a display _item Product_name.  There is action dynamic PL/SQL that fills the element displayed when the order_id is changed. The problem is that when I opened the page for the first time, if I change the select order_id list, nothing happens. But if I refresh the page once, and then it starts work and the display_item is filled.
    No idea what could be the problem?
    Thank you
    Ryan
    			 
    ryansun wrote:
    

    On a more serious note,.
    

    1 when you load the page for the first time and try selecting the order_id, nothing don't be past, try refreshing the page once and you will see the option to display with the null value. What I do is. I have two tables
    

    Orders
    

    1
    

    2
    

    3
    

    Products
    

    1A
    

    2B
    

    2 Z
    

    3 C
    

    When I select the command 1, then since there is only one line of products, the displayed item will indicate A populous. If I select 2, since there are two product lines, I should see the list box.
    

    Doesn't seem to work and I'm sure, I'm doing something wrong.
    

    Difficult to be certain that as it appears that someone has been editing the page before you start watching (rather than copy the page experience their own copy). Your article P1_PRODUCT_NAME_DISPLAY he a point value / Expression 1 column = Expression 2 condition P1_HIDE_SHOW = 1 condition on that? Or any other condition of rendering?
    

    These conditions do not match the dynamic actions. They are applied only during the page see the transformation when the page is displayed first; When it is linked to another page; or after a branch to him. They are not applied dynamically during the activity of the user on the page. In this case, that the status is set to false when the page is rendered first, the same element does not exist in the page sent to the browser. If you want these items to appear conditionally because of the interaction with another user control, then you must initially return the elements and control their visibility using hide/show the dynamic actions.
    		   
    •  
            
           
  •  
		     
    Adobe Edge (with video) + Sizmek does not load on the first attempt in Firefox
     
			 
    We tried to get a series of Adobe Edge HTML5 with video to work with Sizmek and Firefox and have had no luck.  We did a series of works autour and nothing seems to work.
    But if we do a sequence of basic Adobe Edge it works fine, but as soon as that video is attached it crashes and does not do anything (on initial load).
    We found this banner of Adobe Edge with video works with all browsers except Firefox unique.
    So far, we tried the following solution.
    What has not worked
    • Move the code of compositionReady edge of Sizmek at the head of the document.
    • Mix video load order in the file edge.js
    • Reduces the size of the video thinking it could be a weight of file problem.
    What worked
    • Deleted the video in the Edge file and have basic animation and it works very well.
    • Removed the Sizmek EB codes and it is loaded with videos, but is of no use to us because it does not respect the framework of ad Sizmek platform.
    • Re-build the banner using only the model Sizmek with greensock and works perfectly.
    Have contacted us the support of Sizmek and crossed a few developers and they said that the issue is in the ship's library and the compositionReady event is not dispatched to the first loading of Firefox.
    They have also done a few tests and think it might be a big problem with Adobe Edge and asked that contact us Adobe to find a solution.
    Can someone please point us in the right direction or other solutions of workaround to get the edge work "reliable . ”  with Sizmek and Firefox?
    We know that we can build with just all the code, but our digital designers are not coders and need a solution to animation of timeline as opposed to a text editor. (With "Edge animate the logical progression of Adobe Flash for them")

    Thanks in advance!
    My current configuration of the system: MacPro (end 2013)
    Operating system: OSX Yosemite 10.10.4
    Animated adobe Edge Version: Adobe Edge CC 2015
    Version of Firefox: 38.0.1

    Here is a preview link:  
    http://platform.mediamind.com/Eyeblaster.Preview.Web/default.aspx?previewID=9tJlNivoKiW3dH KTuk0LbbCgEiv2EIykKfVwKNgMDykKfuZrA44UDg % 3D % 3D & AdID = 31080610 & lang = en - us

    Link of the Adobe Edge sample file:
    Dropbox - 970 x 250-video - standard.zip
    			 
    .. .on investigated further. including an ogv version seem to fix this problem for some reason any (FF should play mp4s without problem).
    

    The VGO must be first in the order of the source. I think that this must be done manually in code.
    		   
    •  
            
           
  •  
		     
    Import of files fails on the first attempt
     
			 
    Hello
    I have a plugin that takes a certain folder to import files.
    The first time that my plugin is trying to import a file, I get this error
    error3.JPG
    But subsequent calls to the same document succeed and imports it correctly from adobe acrobat. Do you know what could happen, it's sort of timing issue?
    			 
    Figured this out. I free myself from the ASPathName at the end of my method. But it seems that Acrobat still needs them. I now release on close application or reuse if the user decides to add/replace more documents as at this time they will have been loaded and used.
    		   
    •  
            
           
  •  
		     
    Cordova app fileTransfer.download fails on the first attempt
     
			 
    Guys it's been a week I tried to solve this problem.
    

    I have this app in Cordoba that downloads a number of images in the local directory and does well on Android and iOS. FileTransfer should work perfectly on BB10 as well, but the download fails with the error code 1 first time the application is run.
    

    Oddly enough the download succeeds second time I run the application.
    

    Here's my quick snippet of the application that works on other platforms
    

    window.requestFileSystem = window.requestFileSystem | window.webkitRequestFileSystem;
    window.requestFileSystem (LocalFileSystem.PERSISTENT, 0, fileSystemSuccess, fileSystemFail);
    
            
    function fileSystemSuccess (fileSystem) {}
    var FP = fileSystem.root.toURL () + "category of xyz.jpg";
    fileTransfer var = new FileTransfer();
    fileTransfer.download (CAT [num], fp,
    {function (Entry.)}
    Alert ("full download:" + entry.fullPath);
    createCategoryCache (cat, num + 1);
    },
    {function (Error)}
    Alert ("source of the download error" + error.source);
    Alert ("download error target" + error.target);
    Alert ("download error code" + error.code);
    }
    );
    }
    

    First, this application runs after installation, the code goes into error with the settings below:
    

    Error.source is null
    

    Error.Target is null
    

    Error.code isn't a numebr but a ProgressEvent object instance. Further investigation of the ProgressEvent, it shows that
    ProgressEvent.percentage is 0
    ProgressEvent.loaded is 0
    ProgressEvent.totl is correctly reported the size in bytes of the file to be downloaed.
    

    Next time you run again the code above and the download is successful, no problem at all
    

    Can someone please shed some light on this subject? I tried everything I could do.
    

    For example
    

    I tried to use cordova.file.dataDirectory instead of fileSystem.root.toURL)
    

    I tried to use blackberry.io.sharedFolder instead of fileSystem.root.toURL)
    

    In any case, the behavior is the same. Failure to try a percentage 0
    

    Success on 2 with full download attempt.
    

    Any help will be much appreciated, this project is already too late.
    			 
    Hello
    

    There is a known issue, write files using the latest file plugin for all other iOS and Android platforms.
    

    This has been fixed and a new version of the plugin is underway.
    

    Until it is officially released, you can get the update from git.
    

    cordova plugin rm org.apache.cordova.file-transfer
cordova plugin rm org.apache.cordova.file
cordova plugin add https://git-wip-us.apache.org/repos/asf/cordova-plugin-file.git
cordova plugin add org.apache.cordova.file-transfer

    		   
    •  
           
          
         
		
     
          
    Maybe you are looking for
     
          
       
           
    •  
		     
      Satellite C660-1FS - error starting Windows 7
       
			 
      Hello to everyone. I have this laptop with Windows 7 Home Premium (no data by purchase of installation disc). Since this morning, I feel the following message/problem Windows error recovery Windows could not start. A recent hardware or software chang
       
		   
      •  
           
    •  
		     
      Redownload previous tracks
       
			 
      I deleted an album from my hard drive. Instructions for download https://support.apple.com/en-gb/HT201272 Say click on name, then purchased, but my name does not appear.  There is nothing between the central control area and the status bar.
       
		   
      •  
           
    •  
		     
      13 - s102nu: x 360 replacement of SSD
       
			 
      I need to replace the onboard with a 512 Transcend SSD370 128 SSD. I want to know exactly if and connector and support I need to use.
       
		   
      •  
           
    •  
		     
      error 643 - need to call for support
       
			 
      I tried everything to resolve the error 643 associated with the .NET SP1 update.  I have to call Microsoft for support, but I can't find a number that allows for free support.  Support cat wants to $69 for support
       
		   
      •  
           
    •  
		     
      Why my Windows Movie Maker is not record my video?
       
			 
      She claims that the specified files are not found. I have imported a + RW DVD files and had to use the handbrake to convert the file. He strongly degraded quality but worked. He also cut a clip in 4 small clips. Then I converted to WMV with Youtube D
       
		   
      •