Trigger the chronology of a symbol by clicking on an element inside another symbol

Similar Questions

• In the Flash IDE, how can I scale the contents of a symbol without their appearance throughout the FLA?

  In the Flash IDE, I would like to scale the content of a symbol and then conversely fits a all instances of the chronology of this symbol.

  We have animations that were created to double the size of the size of the intended end-use. Of course, we can reduce bodies to 50%, but this isn't what we want to do. And here's why.

  Our use case for these animations means assign some of the contents of the symbols for performance reasons bitmap data. If we simply reduce the instances, the bitmap content is always twice as large as necessary.

  Yes, just make the symbols that only contain a bitmap image.

  Another tip, your bitmap image is either going to be recorded in the middle or top left. If it's in the Middle, you can select, Panel convert 50%, convert to bitmap, transform Panel 200%. If it is registered in the upper left corner (not sure how this would happen!), it is best to use the properties panel to the half of the width/height, convert to bitmap, set a height double width.

  Either way, in the case where you didn't know that, in one of these fields of property you can do math. Do not sit there work on which half of something is mentally, or in what position of x, it would be if it was 1234 pixels to the right. You can go on the ground and add: "/ 2" for example and all width was, it's now half that. Similarly, for the x position, you can add "1234" after the existing x value, to move that many on the right.

• Reset button for all the chronologies of symbol on the stage

  I have several slideshows in my animated document, and I have three buttons at the top of the document that a user can click. Each button calls some slide shows (which are symbols) and brings them to animate using sym.getComposition () .getStage ().getSymbol("mySymbol").play. It works fine, but as soon as I click a different button, the symbols that the other button activated keep animating.

  I know that I can reset the timelines for symbols referencing each slide show by name individually, but y at - it an easier way? I have so many symbols!

  Thanks in advance!

  Erik

  You can also use getChildSymbols(), which gives you a table of references of the symbols of your scene.  Here is a brief sample, which uses the same code of sample of the API to animate:

  https://creative.Adobe.com/share/b2c57450-5bc6-41d7-ACF6-8aac9a84456a

  This code would be a bit more generic and would not involve to maintain a list of objects.  Please note that this applies only to symbols that are currently on your scene, dynamically declared or not.

  I hope this helps!

  -Elaine

• How do you get a button to trigger the click of another button?

  Hello
  
  I have a hide/show region that is controlled by a button (Button). This button and the area is pretty far down on the page.
  
  If the client has requested that I created a second button (ButtonB) and place it at the top of the page and wants for this (ButtonB) button when you click on ' click on ' hide/show below (Button).
  
  Can you please tell how to proceed, ex:
  
  < INPUT type = "button" value = "show all regions" name = "ButtonB" onClick = "what should I put here to trigger the 'click' of A button" >. ""
  
  Any advice would be appreciated as I have to demo this function when the customer tomorrow morning.
  
  Thank you very much
  Laura
  
  Published by: user8936524 on April 19, 2010 04:35

  Sorry ill read the original question.
  The easiest way is probably to look at the source of the rendered page to find the link.
  The desired bit will be a function "javascript:hideShow()", probably in the tag with a class "t2HideandShowRegionLink" (or similar depending on the theme)

  If you feel adventurous, you can write a bit of jquery (other javascript libraries are available) to locate and execute the button directly instead of duplicating the code

• Scrub through the timeline of a symbol with an invisible cursor

  OK, I searched on through messages and messages on and off the EA forums and nothing I found actually seems to do what I need.

  What I have is a symbol ("PAN"), which contains 3 layers of animation to create a posted parallax effect is far right to 0ms is extreme left position to 1000 ms. I set compositionReady to keep up to 500 ms (the middle point of the Pan). To do this, not AutoPlay.

  I want to do this is to drag this pan left or right and have the symbol animate in a good way to show that Parallax pan.

  I think that the best way to do it is to have an element point invisible size, that can be moved left and right - limits - and who controls the chronology of the symbol of the PAN.

  I know how to do the daggable elements and limit their movements using JqueryUI. I also know how to call the position of being a movement. What I do not know how to convert this position both a chronology. Is it possible to do this using Jquery slider?

  I hope that makes sense and someone can help.

  Thank you

  Justin

  OK, I've pretty much it works thanks to a truly great piece of code I found here.

  Create Click and Touch movable scrubbers with edge CC animated | sarahjustine.com

  I'm still working on a few adjustments, but he did what I wanted

• Help, please! to stop the animation of a symbol of the stadium or anover

  I'm not a specialist of jquery, but I had to deal with it. And have some expirience... But I can't do a basic thing along the busy, I guess. So, help me please!))

  I need to stop certain symbols of the child of the chronology of the symbol of the parent (or stage). The chronology of the scene, I have trigger. Currently, all child clips must stop as a...

  I'm trying to insert into the shutter button, copy the following code:

  (child clips names: 'stan', 'bizan', 'bak')

  var stantostop = sym.$("stan");
  stantostop. Stop();

  var bizantostop = sym.$("bizan");

  stantostop. Stop();

  var baktostop = sym.$("bak");

  stantostop. Stop();

  and I'm sure, I'm doing something wrong (!), cause, nothing changes.

  If you can't help, please advice me some source with many examples of typical operations and commands like this! So thank you for reading!

  Hi, Strashevsky-

  You don't need to refer to the object jQuery if all you want to do is stop the timeline.  You can simply do:

  sym.getSymbol("stan").stop ();

  OR

  var stantostop = sym.getSymbol ("stan");

  stantostop. Stop();

  Hope this help get you pointed in the right direction!

  -Elaine

• Replace the code in the timeline of a symbol

  My question is:

  I built a symbol and name it videoholder. Inside the symbol, I draw a Rectangel and

  name: Rectangel.

  Iput the following code on the first image/MS:

  var video_path = sym.$("Rectangel");

  video_path.html ("< video width ="750"height ="421 "src ="example.mp4"type =" video/mp4 "controls =" orders"< / video > ');

  So I remove the symbol of the scene.

  Now, I have placed different images as symbols on the stage.

  When I click on these images, I get the videoholder_image on the stage via the library createChildSymbol.

  What I want is to put a code on each image_symbol which allows me to change the code

  inside the Rectangel videoholder:

  var video_path = sym.$("Rectangel");

  video_path.html (' < video width = "750" height = "421" src ="example_new.mp4" type = "video/mp4" controls = "orders" < / video > ');

  I appreciate all the help

  (1) your project is difficult to decipher with named Rectangle or TextCopy items. Give descriptive names, or you will get lost when you open your project in a few months

  It is more readable when the instance names for the name of the symbol. For example videoHolder_1 videoHolder instance (and if there is a second instance, you name videoHolder_2).

  (2) do not use a sym.stop () of trigger to Mrs. 0 Instead uncheck autoplay of the symbol property (can be the symbol of the scene).

  (3) in your symbol videoholder, you used a trigger at 0 m A good place for initialization is the event creationComplete of the symbol Manager.

  But for now this code must be placed in the comments, because it will be replaced by executing the chooseVideo function.

  (4) why you use Tweenmax? The first interest dashboard animate should easily tween in the timeline panel.

  (5) work-all > work01: looks like useless, a second work-all.

  (6) the first error. In your videoholder > 0 ms shutter: sym.$("Rectangel")

  But in the function chooseVideo: sym.$("Holder"); should be "Rectangel.

  (7) second mistake. you define the overall function, but nowhere it is called!

  *

  Yes, tabula rasa. A symbol of work nests two symbols w_01 and w_02, the keys of access to each of the two videos.

  Contains a symbol videoHolder

  -a title element, text that will receive the title;

  -a videoFrame, the rectangle element that will contain the tag

  -a symbol of back_btn.

  The scene has its property autoplay set to false. By clicking on one of the buttons plays on the video of the label where videoHolder_1 slides up (and works has its display property set to none). A trigger of sym.stop () in the final position.

  

  document.compositionready event handler:

  sym.chooseVideo = function (numChoice)

  {

  radical var = "";

  Var title = "";

  Switch (numChoice)

  {

  case 1:

  radical = "video1";

  title = "this is video 1;

  break;

  case 2:

  radical = "video2";

  title = "and this one is 2 video."

  break;

  }

  build the

  var video_tag = '

  video_tag += '.mp4" poster="video/';

  video_tag += radical;

  video_tag += '.png" type="video/mp4" controls="controls">';

  var video_H = sym.getSymbol ("videoHolder_1");

  video_H.$('videoFrame').html (video_tag);

  video_H.$('headline').html (title);

  SYM. Play ('video');

  }

  works > w_01.click event handler:

  sym.getComposition () .getStage () .chooseVideo (1);

  works > w_02.click event handler:

  sym.getComposition () .getStage () .chooseVideo (2);

  Download an example here: https://app.box.com/s/ykrvwvy3fclrdbwbwxff

  Gil

• Control the timeline of a symbol

  Here's what I would do:

  Click play "circle."

  Then again the user clicks:

  in, click playReverse 'ring '.

  I use the symbol as the botton to trigger it is animation. So, how do we use the same symbol to trigger the animation in reverse.

  Thank you!

  Hey 19, you can do this by setting a variable in the Stage.compositionReadyEvent:

  SYM.direction = 'forward ';

  Then the button click, check this variable:

  If (sym.getComposition () .getStage () == 'forward') {}

  play forward

  SYM. Play();

  switch to the next click var

  sym.getComposition () .getStage () = 'reverse ';

  } else {}

  play reverse

  sym.playReverse ();

  switch to the next click var

  sym.getComposition () .getStage () = "forward";

  }

• I can't get the move animation to automatically trigger the next slide

  Hello

  New to Keynote. I wonder if there is a way to trigger the next slide to load after doing an animation out, that does not involve having to make an additional click? For now, I have text that moves transition and get him out on click, which then leaves me a blank screen, rather than the transition to the next slide.

  Pointers or help with this would be really appreciated.

  Click the background of the slide from the slide that has the text animation: Inspector > Animations > Transitions:

  the value of the drop of Transition start automatically

  Enter an amout for the delay, if any

• How to trigger the value change in the structure of the event

  HII everyone, like the title, how should I trigger the value change event to display a message... Here is my connection... I want to trigger structure of the event to bring up the subvi, when the flame and the led are TRUE State... I have using the node property, but still not able to run event structure... How should I connect? Thank you very much...

  There are several ways you can do. First of all, you need to configure your sub - vi while he does everything you want when you run (in the properties of vi, top most window for example) and to make sure that it closes completely when you're done (when you click on the 'OK' button, for example).

  Spend you need an asynchronous call to the subvi. There are several ways to do so. My favorite one below. You go in the palette under 'Application control' and select a static reference VI. I like this approach because it keeps track of the way subvi for you, as long as the subvi is in the same project. Then, drag the sub - vi on the empty square which will be changes to your sub - vi icon. Then, you connect to an invoke node in the same palette under and select run VI. "Wait, that 's" set to false and the main VI will continue to function after the start of the vi of Sub. Together "Auto Ref" is the best way to go. Otherwise, you will need to follow the sub - vi reference and shut up yourself when you are finished.

  

• Where to find the files for the integration of custom symbol sym.

  Hello

  I would add a Schottky diode personalized my Multisim 11.0 schematic. I would use the Schottky diode symbol and don't know where to find the adequate .sym file. Is there a database of these files? Of course, another option would be to do it myself. However, I would be nice to know how to extract the .sym files existing symbols in Multisim.

  Thank you.

  Kind regards

  Viktar

  Hello

  There is not a database with .sym files. However, you can take one of the symbols of control of databases and modify (if needed). Use the Component Wizard in Multisim to create your Schottky diode custom, when Multisim asks that you to the symbol information select copy of DB; in the Master database access Group of Diodes, Family SCHOTTKY_DIODE and select the most appropriate symbol, click OK. If you need to change this symbol just click change to open the symbol editor.

  Kind regards

• I downloaded google chrome but when I installed all the writing is in symbols so I removed completely all then rebooted and installed again. Always the same.

  Google chrome, other languages and some programs in symbols

  I downloaded google chrome because its my favorite web browser, but when I installed all that the writing is in symbols, so I completely removed everything and then rebooted and installed again the rebooted again and its still in symbols, please help

  Hello

  This can happen if Google Chrome has not installed the appropriate language. To work around the problem, change your language version after installing the browser.

  a. click on the Tools menu.

  b. Select Options.

  c. click the Advanced tab.

  d. in the "Web content" section, click on change of police and the language settings.

  e. click the languages tab.

  f. Select your Google Chrome language from the menu.

  g. click OK.

  h. restart your browser.

• How can I remove the sort of conversations from windows livemail, but keep the chronological order?

  How can I remove the sort of conversations from windows livemail, but keep the chronological order?  The standard options do not seem to understand my Inbox of sort by chronological order of!

  On the view tab, select Conversations > Off. Then click on display a line below the list of messages. Right-click on a column heading to select the column, drag a column header to reorder the columns, and click on a column heading to sort by that field.

  Windows Live Mail has its own support at the Windows Live Solution Centerforums. Please address any other question you may have on one of the forums on the right side of this page.

  Noel

• How can I get the classic report value when I click on the record?

  Hi all

  I have a simple classic report and I want to get the empno when I click on record. For example, when I click on record 1, and I'll go '7369', if I click on the 3 card, and I'll go '7521'. How can I do this? Please help, thanks!

  

  Hi jane.kuang,

  Jane.Kuang wrote:

  Thank you very much!!! Your message is useful for me. But this javascript has something wrong. When I click on the first time, the empno appears only once, but when I click on the other record, empno appear twice, and I click on the third time, it appears three times... I'm new to JS, I don't know how to fix it. Thank you!

  Use instead the dynamic action to that effect.

  Here are the steps:

  • Change your region classic report-> section 'Attributes'-> 'ID' static-> give an id say myempregion static
  • Create a dynamic action with the following attributes:

  Event: click on

  Selection type: jQuery Selector

  jQuery Selector:

  #myempregion table.uReportStandard tbody tr
  

  Action: Run the JavaScript Code

  Code:

  var empno = $(this.triggeringElement).find('td[headers="EMPNO"]').text();
  alert(empno);
  $('#P21_X').val(empno);
  

  Items concerned: keep it unselected

  • Change once created, your dynamic action-> go to section 'Advanced'-> set 'Extended event', 'dynamic'.

  This will fix the following in the code of the Para:

  • The jQuery Selector used by Para to trigger the click event is bad. This will fix the multiple alerts.
  • Para code won't work on loading the page, but if there are many rows in the table and pagination for the report is in place, and then when you paginate your report, it will not work. But it will work with dynamic action 'Scope of the event' the 'Dynamic' value even when you paginate the report.
  • Finally, most of the dynamic interactions page must be converted to dynamic actions, this will help the maintainability of the code, instead of stacking the javascript in your page.

  Kind regards

  Kiran

• I lost the chronology and facebook in the left panel on my lightroom 6.  How to make a comeback?

  I lost the chronology and the Facebook panels in my lightroom 6.  How to make a comeback?

  Hi GEMSupport,

  Please press "TAB" on your keyboard.

  Also make sure to publish services"is selected when you right click on folders Panel in the library module.

  

  Concerning

  Assani