Trigger to insert data

Similar Questions

• Trigger to insert data on the null columns

  Hi all

  How can I create triggers to insert data into a column null, this column is a Varchar2.

  Thanks in advance.

  Something like this:

  create or replace the TRG_BI_MYTABLE before insert on MYTABLE for each line

  Start

  : new. MYCOLUMN: = nvl(:new.) MYCOLUMN, 'A value');

  end;

• Create the trigger to insert data from one user to another user in same Databas

  Dear Sir, I created a trigger as follows
  
  CREATE OR REPLACE TRIGGER TRIGGER1
  BEFORE INSERTING
  ON table1
  FOR EACH LINE
  BEGIN
  INSERT IN THE TEST. TABLE2
  VALUES (: NEW.) COLUMN1,: NEW. COLUMN2,: NEW. COLUMN3,: NEW. COLUMN4);
  END;
  /
  
  I want here to insert my user to user Test data. In this Situation when I Execute The above Trigger it shows error PL/SQL: ORA-00942: table or view does not exist
  
  Help, please

  What do you mean by run the trigger?
  Do you compile?
  Can be open as a TEST and do the following and try to compile your code of the trigger again.

  grant insert on TEST.TABLE2 to youruser;
  

  See you soon,.
  Manik.

• What trigger to use to insert data into the table db forms

  Hello
  
  My form is current having a block of database with the table reference. When you enter data into the form field and click Save. Automatically record is inserted in the database table.
  I want to do this under manual insert. I changed the block of data to a data non-base. Where should I write the insert statement to insert data into the table.
  Is - shutter release key of the form-level validation?
  
  Please notify.
  
  Thank you
  Didi.

  You can guide me how to remove the message FRM-40401 no changes to save and instead, I wanted to put 1 transaction record successful... some like it like that.

  Hi didi.
  And this is my last post I'll sleep. ;)
  Take form level trigger named preform
  and write on it

  :SYSTEM.MESSAGE_LEVEL := 5;
  

  I hope this works...

  Hamid

  Mark correct/good to help others to get the right answers. *

• Insert DATA into my DB on uppercase format

  I have a well-founded datablock, I used commit_form(); to insert data in my DB.
  But I want to insert data in my DB on uppercase format!
  
  Any suggestions?

  Hello.

  You have many options. Which one to choose depends on your needs. If you as the user to enter in capital letters in the text elements of the form, then just defined the 'Restricted cases' property of this text to "Superior" element This way, you have a consistency of data between the form and the database, if no further action is required. If you don't mind the restriction of the case by the user, then you could do it in the database trigger. But be aware of querying these data could be difficult if we need to consider question is case-sensitive by default.

  Best regards.

• onchange event trigger to load data from Server

  I have following code to filter my second list from my list.

  It works when the user click on the drop down menu, since the event onchange trigger.

  I tried to load the data from the stored procedure, then the onchange event does not trigger when the user must update the data, and then see the entire list without filtering.

  I would like to know if it is possible to the onchange event of tripping when I insert data from a stored procedure,

  Your information and help is much appreciated,

  Kind regards

  Iccsi,

  < td > < select name = "Mylst" id = "Mylst" >

  < cfoutput query = "PSP" >

  < option value = "" #MySP.MyID # ""

  < cfif (isDefined "(form. MyID") AND form. MyID EQ MySP.MyID) > selected = "selected" < / cfif > > #MySP.MyName # < / option >

  < / cfoutput >

  < / select > < table >

  $("#Mylst").change (function)

  {$.ajax({)}

  type: 'GET ',.

  URL: ' Mycfc.cfc? method = GetMethod & MyParam ='+ jQuery("#MyPrelsty").val (),.

  data type: 'json ',.

  cache: false,

  success: function (data)

  {

  $('_#MySublst_option').remove ();

  $(données, fonction (i, obj) .each)

  {

  $("#MySublst").append (' < option value =' + ' "' + data [i] [0] + '"' +' > ' + data [i] [1] +)

  ("< / option >")

  });

  }

  });

  iccsi wrote:

  I would like to know if it is possible to the onchange event of tripping when I insert data from a stored procedure,

  Yes, it is of course possible. The environment in which the event takes place - the browser - is independent of the environment in which the data is loaded by the stored procedure - the ColdFusion server.

  Any problem that you are experiencing are probably those of JQuery. A similar question was answered Stackoverflow.

• Problem with trigger AFTER INSERT

  Hi all
  
  I am updating a column in the table by adding 2 characters 'a_' after INSERTION using the trigger.
  
  Now when I insert data in the table a trigger is fired for INSERTION.
  According to the syntax, I think that we cannot pass parameters in a trigger.
  I have a test10 table that looks like this.
  

  t1    varchar2(10)
  t2    varchar2(10)
  t3    varchar2(10)
  t4    number
  t5    number
  
  t1 is kinda primary_key and t2 is unique though the table isn't structured like that but the data in it follows that.
  The code in the trigger looks like this 
  
  CREATE OR REPLACE TRIGGER test10_t1 
    AFTER INSERT 
    ON test10 
    FOR EACH ROW
  BEGIN
    IF INSERTING THEN
      UPDATE test10 SET t1 = 'a_'||:old_value WHERE t1 = ?;  -- I need to mention the parameter here but not sure if we can pass param in a trigger 
    END IF;
  END;

  If I omit the WHERE clause, all records are updated. Is there another way to solve the problem?
  
  THX
  Rod.

  There is no need to use a clause of update.

  Have you tested the relaxation that I suggested in my last post?

• inserting data into a temporary table

  I want to do something like session and I decided to use the temporary table. But when I try to insert data that has no past. This is my trigger when-pressed key code:
  
  
  declare
  
  total_col number (18.0);
  varchar (100) of the author.
  title varchar (200);
  price number (18.0);
  
  
  Start
  Select BOOK_AUTHOR, BOOK_TITLE, BOOK_PRICE by author, title, price from BOOKS where BOOK_ID =: BOOKS. BOOK_ID;
  insert into orders_tmp (author, title, price) values (author, title, price);
  commit;
  
  Select total in total_col total_amount where t_id = (select max (t_id) total_amount);
  : SUB_CATEGORY. AMOUNT: = total_col;
  end;
  
  the first line of the selected data of the block, 2nd insert into the temporary table. 4th line selected the last column in a temporary table and dispalying in etiquette. When the trigger is activated, I have an ORA-01403 error.
  Help, please.
  
  Edited by: 863470 2011-09-06 06:50

  I decided to use the temporary table

  Can you show how you created your temporary table (ie., show us your DML Table statement)? Without knowing how you have set your temporary table, we can really offer you suggestions. ;)

  declare
  

  total_col number (18.0);
  varchar (100) of the author.
  title varchar (200);
  price number (18.0);
  Start
  Select BOOK_AUTHOR, BOOK_TITLE, BOOK_PRICE by author, title, price from BOOKS where BOOK_ID =: BOOKS. BOOK_ID;
  insert into orders_tmp (author, title, price) values (author, title, price);
  commit;

  Select total in total_col total_amount where t_id = (select max (t_id) total_amount);
  : SUB_CATEGORY. AMOUNT: = total_col;
  end;

  This is more work than it should be. A much simpler and more elegant method is:

  /* Sample When-Button-Pressed trigger */
  BEGIN
     INSERT INTO orders_tmp (author, title, price)
     SELECT BOOK_AUTHOR, BOOK_TITLE, BOOK_PRICE
       FROM BOOKS
      WHERE BOOK_ID = :BOOKS.BOOK_ID;
  
     ... Rest of your code here...
  END;
  

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• -2147217833 error in NI_Database_API.lvlli: Execute.vi Cmd - &gt; NI_Database_API.lvllib:DB tools Insert Data.vi-&gt; TESTDATABASE.vi

  This error appears when I run the respective VI (attached file). The entire message:

  Possible reasons:

  "ADO error: 0x80040E57 the Exception occurred in the Microsoft JET Database Engine: the field is too small to accept the amount of data you attempted to add." Try insert or paste less data in

  ' Create a NI_Database_API.lvllib:Rec - Command.vi - > NI_Database_API.lvlib:Cmd Execute.vi - > NI_Database_API.lvlibB Tools Insert Data.vi-> TESTDATABASE.vi.

  I don't know if the cause might be to make the .udl file. But I doubt that.

  I can list a series of factors that can have an impact on this error, since I do not know the possible cause.

  -The database .mdb extension, it's a 2013 Access database but I taped in .mdb

  -When you create the .udl file, the selected provider is Microsoft JET 4.0 OLE DB Provider.

  -In the block diagram after the function bundle, I used a Variant function, as I read its viable to use. I already tried without the variant of thought.

  Your column names do not match - in the database, you underscore characters in the names of your column in your VI, you do not have.

  You might also have a problem with your "Test number" field - depending on the size of the field, you have set up, he could not accept double digital floats:

  

  Which corresponds to the error you see. If you use an integer, you should connect an integer type of the appropriate size (e.g., I16, I32/I64) to the insert command.

• Insert data into an existing timechannel

  Hello

  I'm trying to insert data into an existing timechannel. To illustrate my use case, I prepared a few data :

  Absolute timechannel D1 D2 D3
  14.02.2013 03:22:51.3930 - 4-92-703
  14.02.2013 03:22:52.3930 - 4-92-697
  14.02.2013 04:06:19.7280 - 1-75-674
  14.02.2013 04:06:20.7280 - 1-75-696

  As you can see there is a chronological gap between the second and the third group of data. Now, I want to insert a line with NoValues in this interval.
  The data has been saved with a sampling rate of 1 Hz. After processing the data, they should look like this:

  Absolute timechannel D1 D2 D3
  14.02.2013 03:22:51.3930 - 4-92-703
  14.02.2013 03:22:52.3930 - 4-92-697
  14.02.2013 03:22:53.3930 NV NV NV
  14.02.2013 04:06:19.7280 - 1-75-674
  14.02.2013 04:06:20.7280 - 1-75-696

  Insertion of the NoValues in the data channel works very well with 'DataBlInsertVal '. But I'm having a hard time to achieve the same in the timechannel. Especially with a dependency on the sampling rate.
  Someone has tried to do the same thing or has some tips how to do this? The main objective is to avoid reporting to connect the data points on this chronological gap.

  Best regards, Marc

  Hi Marc,

  I tried what you wanted to do and he worked with DIAdem 2012 without any problem.

  I used the attached file and copy the following code:

  Call DataBlInsertVal(Data.Root.ChannelGroups(1).Channels("Time"), 13, 1, NV)
  

  Can you try this line with my file?

  Cheers, RMathews

• database insert data missing

  Hello

  I am inserting data constantly loop using toolkit.missing database that data table.and also insert form data insertion in the table it will correct.

  You can do this with the "DB tools free Object.vi.

  

• Several tools of DB insert data error Code :-2147217900

  Hi all :-),.

  I'm new to LabView. Right now I use version 8.2.

  I browse the topic, but I don't seem to find what I need.

  I have two question and I hope you guyz can help.

  1. I make a program and I need to insert my data in SQL.

  Previously, I was using simple DB tools Insert Data.vi due to the one table involved. It was OK.

  In this case, I need to push about 8 groups of data inside the database every 5 seconds.

  I'm not sure on how I should wire VI if I use both 8.

  I tried connecting parallel connection open tools and a data tools insert series to another.

  What is the right way to do it? Please notify. I have attached the insertion of data in my program part.

  2. previously when I try to connect all the 8 in the series, the tracks of vi, however, it does not the data in the database. But when I stopped the VI and tried to run again, the code of error-2147217900 entrant. Can anyone advise on the reasons why it took place?

  Please advise and thanks million in advance.

  Kind regards

  Dave Roziela

  study links here and post if still problem persists

  Mathan

• Cannot insert data into the database

  Hello world

  I stuck with a problem in DB juice. When I try to insert data into the database using DB tool, I get a repeated error message (error 1). Please find the my vifile below and solve say.

  Problem is use Labiew 8.2. So try to answer accordingly

  Try it with a cluster instead of a string or an array.

  

• "DB tools Insert Data.vi" problem in LV 8.6

  Hi all

  Someone had a problem with the new "DB tools Insert Data.vi" in LV 8.6?

  He broke my method to record variations in the data base (engine Jet4, win XP, Office 2007) without caveats.

  All ideas are welcome.

  Pawel

  I tested the DB_test_simple.vi with MySQL database. Data can be inserted into the table. The error occurs when you convert Variant data after the database querying. See the screenshot. Database Toolbox knows that Variant refers to an integer I32 actually. If you look at this table after insertion, there is column b is of type integer. If the questioning of this table will give you these '10' as Variant data to I32, but not from variant to variant. Change the type of entry that the variant of Data.vi as the sceenshot, your VI will work well.

• Insert date Wordpad in Windows 7

  When on Windows 7 Wordpad, I insert the date and save the file, I get "?" in front of numbers. How can I get rid of this?

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand your concern, and we as a community will try to help you in the best possible way we can.

  I suggest you check out the link below and check Insert dates and pictures to documents.

  http://Windows.Microsoft.com/en-us/Windows/using-WordPad#1TC=Windows-7

  Hope the information helps, if you have any additional questions, feel free to post. We are here to help you.
  Kind regards

  Guru Kiran