Update the BIOS of the A110 to satellites--> the size of the ROM file is incorrect

Similar Questions

• Error: Size of the ROM file is incorrect, as the update of BIOS on satellite A200

  Dear Sirs,

  I tried to update my bios on satellite A200 and then I start the update it says "the size of the ROM file is incorrect.

  Can someone help me with this?

  What should I do?

  Hi Stavros

  I think I can help you.
  I remember this error message. Some of the users of the forum have posted a solution.

  For example here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=112057𛖹

  It seems that it s not a serious error is displayed because the BIOS file was not properly extracted.

  Good bye

• Update the Bios of satellite P10-304:-the size of the Rom file is incorrect

  P10 - 304 - downloaded Update Bios, but when I went to run it I get the message "the size of the.
  ROM file is incorrect. What can I do now?

  One question; Why you want to upgrade the BIOS?

  I studied on the knowledge base of the Toshiba site and found this:
  I always get an error message: the size of the ROM file is incorrect.
  http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

  It will be useful.

• Update BIOS Qosmio X 300 has failed - the size of the ROM file is incorrect

  Hello

  I use TEMPRO, and he suggested to update my BIOS.
  I downloaded the file and run the Setup file. Unfortunately, it says "the size of the ROM file is incorrect.

  This means I m doing wrong? or I have the latest BIOS in my system.

  Please advice.

  Thank you.

  Hello

  First of all I don't do everything what said Tempro!

  Secondly, this message was posted here in the forum several times and if you are looking for the size of the ROM file is incorrect, you would find that:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=120455
  and this, for example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=73284

  The problem is that you have unzipped the Cabinet correctly!

  In any case, I think that it s not useless to put anything, if the laptop runs without problem!

• Tecra A6 - update BIOS - "the size of the ROM file is incorrect.

  Hi, I was sent this link to download a new BIOS
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?id=60307&OSID=10&drive rLanguage = 42 & selectedLanguage = 13 & driverCountry = 41 & selectedCountry = 8

  But when I try to use set up, I get an error message that says: "the size of the ROM file is incorrect" and it doesn't let me move forward. How can I, please?

  Paul

  Hello

  Maybe this article can help you http://support.toshiba-tro.de/kb0/TSB59014X0000R01.htm

  Good bye

• Satellite A200 - 1BW PSAECE: update BIOS: size of Rom file is incorrect

  Hello
  I tried to update the bios from the Web site.
  But when I flash, it is said that "file size Rom is incorrect and does not update to the Bios.

  How can I sort this problem?

  First question:
  Why do you update the BIOS?

  The update of the BIOS is not necessary if the laptop works properly!

  But back to your problem.
  Found a solution and an answer why the error message: size of the Rom file is incorrect is displayed:

  Check this box:
  + I can't update my BIOS with the function BIOS Phoenix-file ZIP Windows XP Windows. +
  + I always receive following error message: the size of the ROM file is incorrect. +
  http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

  Good luck

• Disabling update the configuration file without stopping the VI

  I would like to perform a function that when the new modules are added in the existing system of the public Service or hot swapping modules autour, the VI can update its configuration file. I don't want the VI to stop we will collect data 24/7.

  I use cFP2220 and two or three modules of different types. I have my work VI and it is fairly straightforward FP read.vi in a time loop. All data are stored in the database using the Labview database tool. My screws are hosted on the local PC, not on the controller. I'm using Labview 8.6.

  I guess I have to get the file configuration (iak), whenever new modules are added, the iak file can be changed (without MAX aperture). In any case, I would have the flexibility to run the VI continuous. I know there is a similar code here: http://zone.ni.com/devzone/cda/epd/p/id/3221and they get the configuration file in the ini file. But I don't know how it's done as I can save only the configuration file as a file iak for FP system.

  Another potential problem associated with that, I guess, is the database format. For now, I use a three column structure, i.e., DateStamp, value and ChannelID. In this case, if I want to add/remove/swap channels, I can just change the ID of the corresponding channel. What happens if I have a horizontal arrangement of the database, namely 10 columns corresponding to 10 sensors, would he be in trouble if I change channels modules?

  Thank you very much.

  There is a way to change the module and programmatically updated the IAK file without stopping the VI.  You will need to change the FP read.vi front right by with the constant e/s FieldPoint.  You will need to use the Open FP, FP create Tag, read FP, and close to the public Service.  The trick to this is that you must pre-create files IAK in MAX first.  The way to do is to set up your cart in a configuration and then find devices to MAX.  Then save the iak.  Then reorganize your bottom of basket to the next setting would have desired, then have MAX find devices and who save in a file different iak.  You will need to do this for each configuration you have.  Then, you need to place the code below when you want to Ministry the configuration file.  I have also included a screenshot of MAX that you can see what the strings are correlated with.

  

• Hello, I would like to use JavaScript to update the PDF file.  I saw the 'function' 'SearchAndRedactCmd' where can find no information about it. At that moment, I just find information on what it easy as all THE

  Hello, I would like to use JavaScript to update the PDF file.  I saw the 'function' 'SearchAndRedactCmd' where can find no information about it. At that moment, I just find information on what it easy as all THE

  There is no such command in Acrobat JS. Maybe it's the name of an item in menu or function, that someone wrote.

• Need help updated the VMX file on several Virtual Machine

  All,

  Can anyone help with a problem I'm having?  Here is a brief explanation of what is happening and what we need to solve.

  Recently we found out that we need to add a line in the file VMX of several virtual machines.  In the past, I was able to do this, but would have cold start the virtual machine for the changes to take effect.  Starts cold won't be a problem, because we can program it.

  However, no one knows a way to add this line in the file VMX virtual machines in a cluster.

  Here's the line I need added:

  Devices.hotplug = "false".

  Here is a script that was used earlier (esx 3.0 days) to keep the VM tools updated on reboot.  At this point, if the virtual machine has been turned on, this change could not do through the UI.  However, this script worked to update the .vmx file and then we have cold reboots for the changes to take effect.

  Get-viserver - < Server > - < user > - < password >

  $viview = get-Cluster-name NOMCLUSTER | Get - VM | foreach-object {get-view ($_.ID)}
  $viview | {foreach-object
  $vmConfigSpec = new-Object VMware.Vim.VirtualMachineConfigSpec
  $vmConfigSpec.Tools = new-Object VMware.Vim.ToolsConfigInfo
  $vmConfigSpec.Tools.afterPowerOn = 'True '.
  $vmConfigSpec.Tools.afterResume = 'True '.
  $vmConfigSpec.Tools.beforeGuestStandby = 'True '.
  $vmConfigSpec.Tools.beforeGuestShutdown = 'True '.
  $vmConfigSpec.Tools.ToolsUpgradePolicy = "UpgradeAtPowerCycle".
  $_. ReconfigVM ($vmConfigSpec)
  }

  The exact script can be found in Disable HotPlug

• Deleted data file update the control file?

  Hello!
  
  I deleted a file from data in a tablespace. It was done on purpose because I have no more need. Unfortunately
  I have not updated the database control file, now I get an error message:
  
  ORA-01157: impossible to identify or to lock the 202 data file - see DBWR trace file
  ORA-01110: data file 202: "D:\ORACLE\PRODUCT\10.2.0\ORADATA\MINOTAUR\TMP_01.DBF."
  
  How update the control file to get rid of this error?
  
  I use Windows and exit DB 10.2.0.2.
  
  Thank you very much for your help!
  
  Christian

  I think that I made a mistake of reading here.
  Looks like you have deleted a TMP file.

  You then have to join v$ tablespace with v$ tempfile in the statement.

  It's a 10 G (or higher) database?

  Try to drop the tablespace that belongs to this data file, otherwise recreate the controlfile (needs database is offline)

  HTH
  FJFranken

• problem updating the ini file ini file

  I get the ip address of the user's input and to replace the old IP in the .ini to the last ip address file but the problem is when a user enter the IP and I write it in my ini file it does not at once, but if I do it twise in calling the same function of my command button twise then my ini file is updated , it is the strage iniwrite function returnes success although on first attempt. I checked with breakpoint, but when I do it twise, then it is done, please guide me in detail, I am really amayzed by this strange behavior...

  

  I already gave you the exact order of the functions in my previous message!

  Ini file tool generates an object in memory that allows you to store and locate the values. This object can be filled in reading a file on the disk; Similarly, it can be saved to a file on disk. This is the very first operation and the last to perform if you want a picture to date of your values on the disk. There are three layers to consider:

  1. The file on the disk
  
  
  2. The IniText object in memory
  
  
  3. The variables specific to your program

  With this in mind, the right order to update the file on the disk so that it reflects the value that your variables have in memory is:

  Ini_New create the object in memory

  Ini_ReadFromFile fill it with the contents of the disc

  Ini_get('sendmail_from') read of the idebugprogramnode2 memory in your program variables

  Here tou can update the values of program

  Ini_Put update the object of memory with the contents of your variables

  Ini_WriteToFile save everything on the disc

  Memory Ini_Dispose clear

  As you save on disk before you call the Ini_Put functions, the disk image is not updated

• Automatically update the sequence files (any)

  We have a very large number of sequence files that must be updated.  The "Types" have changed.

  Is it possible that TestStand (f1 2010) updated all the files in a directory, or if all goes well recursively?

  What I am used to doing is to check all the files off our Version control, select about 20 files simultaneously and open them in TestStand, save all, and then close them, then make another game...

  Is there a faster way?  (I expect to archive them out of Version control.)

  Mike

  Take a look at the converter file sequence located in tools > sequence of update files

• Windows Update keep updating the same files every time I shutdown my computer

  by doing an update the same windows 7 updates are repeated many times or when I turned off my computer it starts to make updates (repeating the 7 a whenever I turned off my PC.) When I turned on and then it will start it. I used the PATCH but still the same.
  Thank you

  Hello

  Please contact the Microsoft community. We will be happy to help you with your concern.

  According to the description, you get repeated updates when you restart the computer.

  1 did you changes to the computer before the show?

  2. what fixit did you run to fix the problem?

  Follow the steps in the below article mentioned and look for the question.

  Method 1: See the article and try to run Microsoft Fix it:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/en-us

  Method 2: I suggest you to see link and check if it helps:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.

• When updating the password file database

  In our infrastructure, we have several databases (all 11 GR 2 on Linux) who have access to the same password file.

  If the password of a user stored in the password file is changed in a database, this user password is changed in all databases that use this password file.

  If I query the view of sys.user$, I can see when a user has changed, but only for this database and need to check each database to see if the password has been changed for this database. Is it possible to see which update this file to shared password without connecting to each individual database database?

  Thank you!

  Hi Garrett.

  You have active audit? Also, if you have defined AUDIT_SYS_OPERATIONS to true, you should have some information placed in the $ aud. As Joel Suggested, check the timestamp of the change in the password file.

  I think that if you enabled audit_sys_operations, you would also have records written to audit trail operating systems $ORACLE_HOME/rdbms/audit.

  On another note, according to the literature and my test, if the REMOTE_LOGIN_PASSWORDFILE = SHARED, then you could not change the password for the SYS or other users with SYSDBA privilege.

  Take a look on:

  C:\Users\xxxxx>sqlplus / as sysdba
  
  SQL*Plus: Release 11.2.0.1.0 Production on Wed Feb 5 08:17:58 2014
  
  Copyright (c) 1982, 2010, Oracle.  All rights reserved.
  
  Connected to an idle instance.
  
  SQL> startup
  ORACLE instance started.
  
  Total System Global Area 1068937216 bytes
  Fixed Size                  2182592 bytes
  Variable Size             796918336 bytes
  Database Buffers          264241152 bytes
  Redo Buffers                5595136 bytes
  Database mounted.
  Database opened.
  
  SQL> show parameter remote_login_passwordfile;
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  remote_login_passwordfile            string      EXCLUSIVE
  
  SQL> alter system set REMOTE_LOGIN_PASSWORDFILE=shared scope=spfile;
  
  System altered.
  
  SQL> startup force
  ORACLE instance started.
  
  Total System Global Area 1068937216 bytes
  Fixed Size                  2182592 bytes
  Variable Size             796918336 bytes
  Database Buffers          264241152 bytes
  Redo Buffers                5595136 bytes
  Database mounted.
  Database opened.
  
  SQL> show parameter remote_login_passwordfile;
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  remote_login_passwordfile            string      SHARED
  
  SQL> alter user sys identified by oracle1;
  alter user sys identified by oracle1
  *
  ERROR at line 1:
  ORA-28046: Password change for SYS disallowed
  

  So, I was wondering if REMOTE_LOGIN_PASSWORDFILE was the EXCLUSIVE value before the change and changed back? This isn't a dynamic parameter, so you will have to restart your DB. Please check if there's any DB restart or change the setting in the alert.log.

  Kind regards

  Suntrupth

• Insert jpg file psd and update the text file

  

  I want to add jpeg images in the 'photo' of the folder field and also update the details of name, announcements and contact information in the text file.

  It is a dynamic process for 100 students. It should be at the top format only.

  Please help me how to do this using Java Script in Adobe Photoshop CS4 or CS6. How to make this format only.

  Thank you

  No JavaScript code not required, see this...

  PS CS5 - working with Variables | The complete picture with Julieanne Kost. Adobe TV