Triggering Validation in a region through a contextual event

Similar Questions

• How to pass multiple values of payload through the contextual event - jdev 11.1.2.3

  Hello:
  
  How to configure contextual events publish several values of payload?
  
  On click of a button, I'm declaritively publish a contextual event, which works very well when a single value is passed to the event handler.
  
  My event handler method has the signature of:
  eventHandler (String)
  
  But now I also have an oracle.jbo.domain.Number, so my new eventHandler looks like this:
  eventHandler (Number, String)
  
  How to pass two values during editing of the event and how to place the payload with multiple values for the new eventHandler?
  
  All article or code would be greatly appreciated.
  
  Thanks for the help.

  You define a bean holding your values and pass an instance of the bean as a payload...

  Timo

• Contextual event consumer

  Hello

  I use JDeveloper 11.1.1.7.0.

  Then. I have a page that contains a box. The region has a contextual event that fires when the selected item in a drop-down list is changed.

  I am the consumer of the event (on the page) in a java class (which is implemented as a data control).

  My question is, how can I change the value of a value from my page and also refresh (partialTrigger) the element? (my page has a bean class)

  Thank you.

  Hello

  Check this box

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/regionpayloadcallbackpattern-1865094.PDF

  Frank

• Validation of a region defined as a QUERY SQL type (updated report)

  Hello
  
  I am trying to perform validation on a region defined as type of QUERY SQL (editable report). The report has two columns.
  One of the columns is a Select list and I want to make sure that the user can select the same value twice
  in the report. For example, if the selection list has 5 values A, B, C, D, E, I don't want a user to be able to select
  B twice in the report. Will it use javascript to perform validation? If Yes, could someone provide some guidance on
  where to embed the javascript? Are there other alternatives than javascript? I create an element that came from a sql query
  counts the number of lines where the value of the column is the same. I then used the item in my validation logic. The problem with this logic
  is that a user can enter the same value and it is not until the 3rd attempt to select the same value that the validation works using the number of lines which is why I think that I need to somehow capture the value of the selection list when a user selects and then compare it to what is already in the database column Select.
  
  I hope that my question and explanations are clear.
  
  Thanks in advance for your help,
  
  Michael

  Hello

  This can be managed using javascript or a validation of the page. Here is an example of use of javascript: [http://htmldb.oracle.com/pls/otn/f?p=267:7]

  To do this, I have:

  1 - a model of button which does not send the page but just runs javascript. The model will depend on your theme, but should include:

  <a href="#BUTTON_ATTRIBUTES#">#LABEL#</a>
  

  If #BUTTON_ATTRIBUTES # appears on the template, delete it as we need it only once. You must create a new button model based on a copy of your existing across models, shared components. Normally, he would show href = "" #LINK # "-we do not want that this would become doSubmit('buttonname')." If your model does not use tags for buttons, you might need to create one from scratch.

  2 - I have updated the button on my page to use this template and then assign the setting button attributes:

  javascript:check();
  

  3. in the header of the HTML page, I added:

  <script type="text/javascript">
  function check()
  {
   var e = 0;
   var f = document.getElementsByName("f02");
   var k1;
   var k2;
   var v1;
   var v2;
   if (f)
   {
    for (k1 = 0; k1 < (f.length - 1); k1++)
    {
     v1 = f[k1].value;
     for (k2 = (k1 + 1); k2 < f.length; k2++)
     {
      v2 = f[k2].value;
      if (v1 == v2)
      {
       e = 1;
      }
     }
    }
   }
   if (e > 0)
   {
    alert("Duplicates found!");
   }
   else
   {
    doSubmit("SUBMIT");
   }
  }
  </script>
  

  In this example, SUBMIT is the name of the button and "f02" is the name attribute of the select list items that we want to check - change these needs by your page.

  Now, when the Submit button is clicked, instead of directly submit the page, the javascript function is called. This function loops through each selection list and gets its value. Then, he compared it to the remaining items. If there is a match, the e flag is set to 1. After all the items have been verified, if e is not 0, then a message appears. Otherwise, the page is sent.

  Andy

• The use of contextual events for < af:commandToolbarButton... >

  Hi all
  
  I use 11.1.1.7.0 jdev and I cannot upgrade to a newer version.
  
  I need to trigger an event in a region and perform actions according to him in the other. I want to use the ContextualEvent feature as has been described in here . Everything seems clear, but I stuck in how to declare the popup event.
  
  I have a < af:commandToolbarButton... > element to produce the contextual event, I can't change it to something else. "af:commandToolbarButton" isn't Behaivor - ContextualEvents inside-tab to declare a contextual event. Maybe I need to specify it in the other way, for example using an actionListener = "#{viewScope.BeanName.callToEventProducer}" and perform programmatically attempt to contextual event mounted? "
  
  
  in my code I have:
  

  <af:commandToolbarButton ... actionListener="#{BBean.commandUndoRedo}"/>

  and in the code of bean:
  

      public void commandUndoRedo(ActionEvent actionEvent) {
          BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
          JUEventBinding eventBinding = (JUEventBinding) bindings.get("undoRedoEvent");
          ActionListener al = (ActionListener)eventBinding.getListener();
          al.processAction(actionEvent);
      }

  and in taskFlow page def:
  

    <bindings>
      <eventBinding Listener="javax.faces.event.ValueChangeListener" id="undoRedoEvent">
        <events xmlns="http://xmlns.oracle.com/adfm/contextualEvent">
          <event name="undoRedoPublisherEvent"  eventType="Action Event"/>
        </events>
      </eventBinding>
    </bindings>

  and when I try to find this event in any other workflow in pageDef - links - ContextualEvents - subscribers-
  
  I don't see any "undoRedoEvent" or "undoRedoPublisherEvent".
  
  I do well?
  
  Thank you.

  Hello

  You can create A producer events

  And inside the Manager of consumer, you can get a handful of beans of region C (if it is different from A) and update only this part.

  for example.
  This would be your method of consumer (class to create + Create + Add data as the Action method on jsff control)

      public void handleRefresh(Object payLoad){
               FacesContext fctx = FacesContext.getCurrentInstance();
  
          ELContext elctx = fctx.getELContext();
          ValueExpression valExpr =
              fctx.getApplication().getExpressionFactory().createValueExpression(elctx,
                                                                                 "#{backingBeanScope.backing_}",
                                                                                 YourBeanName.class);
          YourBeanName bean = (YourBeanName)valExpr.getValue(elctx);
          bean.refreshT1();
  
      }
  

  You can check
  http://www.jobinesh.com/2010/11/triggering-navigation-from-contextual.html
  http://www.jobinesh.com/2009/07/programmatically-publishing-contextual.html

  Thank you
  JIT

• How to raise a contextual event commandMenuItem

  Hi all, I use Jdev 11.1.1.7 I have a workflow bounded containing a page with af:menu and a commandMenuItem the taskflow bounded is called by a parent taskflow on any element of command menu selection I need some settings back to appellant taskflow. That's why I planning to trigger contextual events on the actionListener to the command menu item. Please let me know if this is correct or if there is no doc who could be referred to achieve. Thanks, Asha

  Contextual events are based on adf link layer if you need 'something' in pageDef, which can produce events (and 'something' in an another pageDef to consume events).

  You may create beans DC and call the method thereof for products/consume the events.

  See also these examples:

  http://www.jobinesh.com/2009/07/programmatically-publishing-contextual.html

  Binary: Outbreak of Navigation from a contextual event handler method

  Or you can spend a few bean managed as BTF input parameter and set the settings back there...

  Or you can use DC Bean that is shared between taskflows...

  http://andrejusb.blogspot.BA/2011/02/ADF-region-communication-data-exchange.html

  Dario

• programmatic contextual event does not post for first click

  Dear all,

  I use Jdev 12.1.2.

  In my case, I have 2 tabs, Tab1 and Tab2. I bounded 2 TF Tab1 and Tab2.

  When you click on the GotoTab2 button, must open Tab2. what I realized using this link https://tompeez.wordpress.com/2014/09/25/jdev-12-1-3-using-parent-action-to-navigate-tabs-of-a-afpaneltabbed-from-inside....

  
  

  Now I have to send some data during the click on the button for this, I use programmatic contextual events. It's works for the second click, many times it's incompatible.

  
  

  It is code for the event during the click on edition link.

  
  

  JUEventBinding = eventBinding

  (JUEventBinding) BindingContext.getCurrent () .getCurrentBindingsEntry () .get ("eventBinding");

  EventDispatcher = eventDispatcher

  (BindingContext.getCurrent () .getCurrentBindingsEntry ()) .getEventDispatcher ((DCBindingContainer));

  Support useful subject = 'Test '.

  eventDispatcher.queueEvent (eventBinding, payload);

  And the consumer code is as below.

  {} public void filterBytestData (object load)

  System.out.println("---iRNum---"+Payload);

  String testData = load (String);

  AdfFacesContext adfFacesContext = AdfFacesContext.getCurrentInstance ();

  Card pageflowScope = adfFacesContext.getPageFlowScope ();

  pageflowScope.put ("testData", testData);

  }

  And I traced the consumer and his editor in the Test.jsf page for the two regions.

  Am I missing something here, please suggest.

  Thank you

  Able to get it resolved with my colleagues help.

  I had 2 workflow in the PSF page. for the 2nd tab I had task flow as 'deferred' which initializes the workflow, only when the tab is opened. I changed it to immediate, which will initialize the taskflow immediately. It works fine now.

• Post a contextual event on disclosure - jdev 11.1.2.3 tab

  Hello:
  
  I need to post a contextual event when a component in PanelTabbed (ShowDetailItem) tab is disclosed.
  
  In each tab, there is a stubborn workflow fell as a static region. Open tabs are defined only to be "active".
  
  The published contextual event is consumed in the BTF fell as a region to the ShowDetailItem of the tab.
  
  How declaritively or publish the contextual event to disclose the tab?
  
  Code or section of sample references would be greatly appreciated.
  
  Thank you.

  Hello

  eventProducer is the method name of the producer.

  You need a) create this method as a method of producer
  (b) create DataControl
  (c) add to the jsff where you want to trigger the event.

  You can see the blog below.
  http://www.jobinesh.com/2009/07/programmatically-publishing-contextual.html

  You can download the workspace that explains
  (1) create producer method, data control EventProducer. Put the producer method on task.jsff
  (2) (2) creer create consumer method, data control consumer event.

  Then goto main.jspx where the event has been subscribed.
  Check-in mainPageDef.xml--> ContextualEvents event Publisher.

  To raise the event, you can see Task.java

          DCBindingContainer bc =
              (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
          JUCtrlActionBinding actionBnd =
              (JUCtrlActionBinding)bc.getControlBinding("produceMessage");
          System.out.println("Producer : Programmatic Invokation !");
          ((DCBindingContainer)bc).getEventDispatcher().queueEvent(actionBnd.getEventProducer(),
                                                                   "Hello, Did you call me?");
          ((DCBindingContainer)bc).getEventDispatcher().processContextualEvents();
  

  Another Blog to see
  http://one-size-doesn
  Programmatically editing contextual events

  Thank you
  JIT

  Published by: appsjit on May 14, 2013 23:54

• Communication of contextual events between BTF

  Is it possible to have contextual events is based on communication between two defined task flow consumed in a single page.
  
  Note that its not from a page to a TF and or a TF to a page. I went through all the oracle Insider videos, this one I couldn't find it. I am looking for the communication of contextual events in function between two BTF consumed in a single jspx.
  
  Appreciate help on this.

  Hello

  Is it possible to have contextual events is based on communication between two defined task flow consumed in a single page.

  Yes.

  Its the same facility if you communicate from a page to a workflow. The Subscriber and receiver are mapped to the file page pageDef container (declaratively as insider ADF video)

  Frank

• ADF contextual event

  Hello
  
  I use JDev 11.1.2.0.0. We have Master Page jsff A. Where is located the delimited region of the task flow and jsff B.
  B inside it is area with a workflow and Page Fragment jsff C.
  
  I created contextual events on child jsff C. I want to call action consumer/subscriber of Parent Page. However, I am not able to see the popup event in the Parent jsff PageDef '.
  
  All the world is facing this problem? Appreciate you could work around that?
  
  Thank you
  JIT

  Hello

  in this case, you use an anonymous provider ' *' and have the event tuned receiver that the name of the action. The provider name is visible only when the producer and the receiver of events are mapped in the same or a file for PageDef parent

  Frank

• The use of contextual events to rynefall a model piloted by LOV

  ADF 11gpatchSet1
  
  Hello
  I have the following Setup.
  
  A homepage containing a region.
  In the area there is a table.
  The contents of the table can be changed in a popUp.
  One of the fields in the pop-up window is a selectOneChoice based on a template
  Driven LOV.
  The research used for the LOV table can be changed via a stubborn workflow
  called from the homepage via a command menu item.
  
  What I have to do is to update the query used for the LOV after the stubborn workflow has been
  called.
  
  I looked at contextual events, but I don't know how to close the loop.
  I created an event on the main page to which the region application module is a Subscriber.
  I've added a command button to produce the event and when the button is clicked the
  application of the region (the Subscriber) module receives the event.
  I must now do the same once the stubborn workflow closes, but I'm not
  sure how.
  
  Any body any ideas?
  
  Concerning
  Paul

  Hello

  the stubborn workflow, called in a region, or using an actiity of taskflow appeal? In the first case, a navigation region receiver could be used which detects the closure of the workflow by its viewId null. If you use a workflow activity call, then you might have a method activity that you call upon the return of the workflow. I don't know that you need a contextual event for that.

  Frank

• 11g: contextual events - how I fires on the change of currency?

  Hello!
  
  After posting a question here: 11g: bounded task flows, need help and advice!
  I read the article on http://technology.amis.nl/blog/3365/adf-11g-how-events-in-one-region-cause-other-regions-to-refresh because I need to refresh region B when the user selects in the region A.
  
  Now, the comments in this article suggest that contextual events are the mechanism built for that use case. So I tried that first. Online help suggests that this is what I need.
  
  I have read online help and created an event and defined a producer and consumer card in the case where in the page of def. in the parent aid now shows how to raise the event when a methodAction binding is executed. But I need to raise the event when the user selects a row in the table of A region.
  
  1. How do I do that? Where do I put the event? Aid says it is possible, but does not show how. Add a selection listener to support bean and call the event link from active methodAction from there? Or is there a better way?
  2. I feel, that - when I use the event to call the ExecuteWithParams method binding consumer - just the VO of the consumer query is executed. That's great. But how to reset the stream to the original action? Just refresh the VO is not enough. I need to reset the stream to the original action (showing a view).
  
  I read http://www.oracle.com/technology/products/jdev/tips/fnimphius/taskflow_in_popup/taskflow_in_popup.html and now I'm completely confused. Use the input parameters or events? If I use events, how to reset (refresh) the task flow?
  
  Thank you
  
  Sascha
  
  Published by: Sascha Herrmann on October 19, 2008 15:33

  Sascha,

  prices area A action B the same transaction? If so and the contents of box B is a dependency of the VO used in A so you have contextual events at all. So if I guess this A region contains a list of departments and region B the employee table (where DepartmentsVO is the parent of EmployeeVO) then do the following

  -Navigate to the definition of region B region in the file pageDef
  -the right mouse context menu allows to add parameters and then a parameter (for example changeIndicator)
  -thread the parameter changeIndicator to the current line of DepartmentsVOIter key str (it's an exposed method directly on the iterator)
  -Set the region to ifNeeded binding refresh
  -set a partial trigger on the regionB to point to the departmentTable for the region is updated whenever the table changes line

  The parameter that you added just does nothing except it tells the region that binds the region needs to refresh. You that he point to the key of the iterator Department line because it provides the changed value.

  If regionB VO is not dependent on the DepartmentVO, then you need create a setting on the taskflow bounded, which takes the value of changeIndicator to write it in pageFlowScope.currRowKey. Then create a currentRowWithKey method that is defined as a default activity and it wire up to pageFlowScope.currRowKey

  Frank

• Contextual events between stubborn workflows.

  I have two independent flow task defined in a page. The user clicks a link on a BTF and who must trigger an event and need to refresh two BTF accordingly.
  
  I want to achieve this using contextual events.
  
  Help, please!

  Hello

  or if you want to watch videos: http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/AdfInsiderContextualEvents/AdfInsiderContextualEvents.html

  Frank

• JDeveloper 11.1.2.3: In regard to the contextual events, af:inputtext, af:table

  adf newbie question fast 11g...
  
  While passing by a nice tutorial on http://www.youtube.com/watch?v=IFl-1RQm_so & feature = plcp Frank, I decided to search with the wizard for creating contextual events. What I noticed that the type of the event produced changes was based on the type of parent (pure!) component.
  
  Dialog contextual event for an af:inputText nested in an af:table
  http://i.imgur.com/uy0Xh.jpg
  
  Dialog contextual event for a stand-alone af:inputText
  http://i.imgur.com/SXsXQ.jpg
  
  The switchable contextual event to ValueChangeEvent for an af:inputText in an af:table type?
  
  Thank you
  
  -Wes

  Wes,

  in fact when I reproduce with 11.1.1.6 then change value event is created for the event popup I create for a text entry field in a table. I guess you always focus on the table when you create the popup event. Check the Lady of PageDef. If you see the event under the binding of the tree, then I'm right.

  Frank

• Spend Parm in the region of contextual event - jdev 11.1.2.3

  Hello:
  
  I have a general question on the passage with the events pop-up settings...
  
  Here is my configuration: TaskFlowA PageA, TaskFlowB the PageB (pages are fragments dropped like static regions)
  
  I need to pass a parameter oracle.jbo.domain.number to relay to PageB and I do not understand how to do this.
  
  I don't want to use the page bounding PageB and connections to relay this at all, just. (region to region only)
  
  Anyone know the appropriate measures?
  
  I tried to use the contextual PageA event payload, so I have the data I need from it. But how PageB receives these data?
  
  I think that through the method the event binding subscribed or what?
  
  Then, click on a button PageA should define the payload, I understand that.
  
  But how PageB receives the payload? What is a simple way to achieve this?
  
  Can anyone point a simple article that explains this use case?
  
  
  Thanks for the help.
  
  Published by: 966952 on April 11, 2013 06:08

  Hello

  payload is the way to go. If you implement the callback model has explained in this document http://www.oracle.com/technetwork/developer-tools/adf/learnmore/regionpayloadcallbackpattern-1865094.pdf, access the value of the payload will become a piece of cake that model works with a managed bean reference set to the receiver limited workflow

  Frank