trimming video

Similar Questions

• When I 1st layer trimming video - the upper layers are in the monitor program. I want to be able to see as a layer that I am Reaper. Where are the settings?

  When I 1st layer trimming video - the upper layers are in the monitor program. I want to be able to see as a layer that I am Reaper. Where are the settings?

  

  Disable Composite preview at trim:

  

  MtD

• trim video/audio display freezes and playback

  Why I think started in the version of 2014...

  Whenever switching mode trim, even just moving from the heads and tails of jointed together clips... PP video display will freeze, about 75% of the time. The timeline cursor still moves and I can save my project... but there is no video or audio movement.

  It will usually come back after some time if I let it sit for 3 to 5 minutes, but I usually quit and restart to avoid it

  My screen is currently frozen as I type this...

  Not really asking for help, because I really doubt someone will have a viable solution that doesn't involve re - install windows... but it happened on 6 months... Fortunately I did 3d FX for the time, and my editing workload was light enough...

  So let's call this a thread/bug of evacuation report if you want... but I'm open to suggestions.

  I run several GPU that could be the problem. 2 x GTX 470 and GTX 590... and win 8.1 64... 24 GB of Ram... 6 core i7

  Thank you

  Disable Composite preview during the filling, see if this will help.

  

• Trimming video - cannot drop and drag? Help!

  Hello

  I'm a novice at this piece of software, and any help would be greatly appreciated. First of all, I have my imported correctly clip and I'm cutting the video. I have selected the two my point in and out point for the smallest bar grey. -The video is truncated, however when I try to drag to the line of time in video 1, trimmed gray bar alone moves from left to right and not display the blue bar in the field of video 1. It drives me crazy so if someone knows what I did not allow that, then give me a shout. Skype me on Nathan.Jennison and I can show you exactly what I mean.

  Thank you guys

  It's a glance toward the Source (the program visible to the right monitor) monitor, where I cut ~ 1.75 sec head and 1 ~ s of the tail. I then just click-dragged from the Source monitor into the timeline. This created an Instance with this "master" element, with the exact in and out Points that I put in place. The screen-cap PrPro 2.0, then things might look a bit different, but similar, with your version. That's why I asked what version you were using.

  

  Hope this helps and good luck,

  Hunt

• Trim video to reduce the size

  I have a great video to go pro in iphoto. I want to set to decrease the size of the video. How to do this?

  You haven't, really. Prune in iPhoto is lossless.

  Export from iPhoto to the Finder:

  -> Export the file, and then set the type to the Original in the export dialog.

  Once in the Finder, you can make the changes you want.

• cropping a picture to a video to produce windows movie maker Vista

  I want to crop an image or a video on windows movie maker or crop, then produce it on windows movie maker (skip the next bit) mke s a video movie

  Hello

  Are you referring to trimming videos in Windows Movie Maker?

  Please see the links below.

  Work with clips in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-clips-in-Windows-Movie-Maker

  Get a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/edit-a-movie-in-Windows-Movie-Maker

  See also the below mentioned link.

  Windows Movie Maker: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Movie-Maker/FAQ

• crop the rotated video

  Hello

  We have a few aerial images taken by drone I needed to cap the horizon.

  IM new edition so used turn to correct.

  We were hoping not to have to increase the scale, so I was wondering what other approach, we could take?

  It seems that the question is how you can trim & video rotated the screen size? Lets say I have 10 degrees rotation, when I select to crop gets cropped with the angle of 10 degrees.

  Hope it makes sense.

  Thanks in advance

  Nesting the clip turned and harvest adds this nested sequence.

• Movie Maker problems

  I have 2 problems with my film. I'm using Windows Live Movie Maker.  (1) I have change and cut a video clip in my film, that it works once, then I'll look at it again and it isblack.  (2) Im trying to save my movie to burn it to a DVD, it happens to 92% and stalls. Can someone help these issues?

  It is a Windows XP Forum.

  Also try to post your question in the following forum:

  Windows Live Movie Maker
  http://windowslivehelp.com/product.aspx?ProductID=5

  Instead of trimming video clips... try to split clips
  and delete the unwanted part. The following article
  explains cut and split:

  Windows Live Movie Maker edit video
  http://explore.live.com/Windows-Live-Movie-Maker-video-editing-using?OS=other

  FWIW, it is possible that your project includes one or
  additional files that are not completely compatible with Movie Maker
  Your project may be too big or too complex for your system
  resources. Also... your video driver may need to be updated.

  As for the issue with DVD Maker... This article may bw is worth seeing:

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
  (scroll down for...) What to do in case of problems)

• too big to burn disc the recorded tv file

  Hi, I have a 5 hour tv program (recorded on Windows Media Center, Windows XP & about 9 GB) I would like to burn to a disc, but the largest disk, I found is 8.5 GB & library will transfer all the data. I am mainly interested to save the 1st 3 hours or so, but don't can't find a way to reduce the actual file in the library. Any suggestions please? Thank you.

  Hello

  If you want to burn only the first three hours of the saved file, then you can use Windows Live movie maker and trim video. See the link below which holds information about the same. Windows Live Movie Maker Help Center: http://explore.live.com/windows-live-movie-maker-trim-video-how-faq

  If you want to burn the full TV then show you may have to use your favorite search engine and search for a software that will help you to compress the size of the file. But I'm afraid, compress the file size can reduce the quality of the video display.

  NOTE: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.

• Problems with the display title of Movie Maker

  * Original title: manufacturer of movi

  Tittle screen back rounds I don't like them is it possible to get more options

  Hello

  Thanks for posting in the Microsoft Community. I understand your concern and I am happy to help you.

  I suggest you check out the link: http://windows.microsoft.com/en-us/windows-live/movie-maker-trim-video-how-faq

  Alternatively, you can provide your comments online.

  Hope this post helps. Back to us for other queries. We are happy to help you!

• What I have to do something special for mobile?

  I try an animation and it is displayed correctly on office, but only a game symbol appears on Chrome on an iphone 6 http://zaksportfolio.com/podify

  Hi Zak,

  You don't need to recreate the entire project in AE, I don't know how your composItion of edge is put in place, but the video is very small and short duration. I import the video file into AE, export as image sequences. Import in flash and export images in the sequence as a "lively edge sprite sheet.

  Then just import the sprite sheet directly on board!

  Tips:

  Keep all sizes to a minimum to ensure that the sprite sheet is created properly (it can be a little buggy, trim video duration, and as much as possible, managers less and smaller dimensions the dimensions of the frames the better)

  When you import into flash you should be able to import a single frame and it detects that it is a sequence (if all managers are in a folder and you have not changed the numbering) the images appear in the pane on the right side and you can select them, right-click and create sprite sheet (you can do specifically for YEAR in FL (, it will create the necessary file of EAS) however I found is you actually save the file under a first re flash animation - open and select the images and create the sprite sheet as above it works much better.

  Don't forget to load the Regional service file that you import into Edge (on board, this indicates how it works)

  As I said, I found that it is a little buggy - and sometimes we have to rearrange the individual images a bit when he is on board - but that's the beauty, you have a lot of control over the timeline is on board, like any other symbol.

  You can also define a query to media at the edge and Exchange symbols (video or sprite sheet) based on mobile or same device width etc.

  Hope this helps, project looks great by the way.

  See you soon

• CC15 crashes at start of playback on comparison screen

  Hello

  I have a problem. I recently built a new PC monster only for mounting in first. Now, everything is very fast, with the exception of a very annoying bug. During the changes, especially if I trim videos, first temporarilly shows a side view beside the images in the window of the program. Whenever this happens, happens often, it impossible to reread and for minutes sometimes hangs on the main window of loading again.

  I know that my explanation is pretty terrible, so I made a screenshot. Its an old project, but it doesn't matter how "heavy" frames or effects are, the problem persists.

  

  I hope someone knows what could cause this, or how the comparison is officially called so I can expand my search

  For a few features:

  3 TB HARD drive for files of film and project

  SSD for scratch disk

  Program files/windows SSD

  I7 5930 k

  32 GB ddr4

  GTX 980

  Update of the first CC

  Thank you!

  After what I read on other forums, off ' Composite overview over the plate ", it is in the sequence of parameters (key on your timeline icon).  Maybe it's the question!

• Dragging to the timeline transitions work in first 11 elements?

  Hello

  If you drag a transition in the timeline panel, between two clips, until you release the mouse button, you can place it on the left, centered or right of clips (the cursor looks like a kind of flag and changes according to the position between the clips).

  Theoretically, this should be the same to change the alignment in the Transitions settings dialog box but it does not work for me, whenever I release the mouse button, selects between Clips alignment.

  I read Adobe Premiere elements 11 classrooms in a book and Chapter 7 creating Transitions, it is said "in software testing used when writing this lesson, which you removed the transition did not affect the alignment shown in the Transition settings... dialog box.»

  It seems that this feature has not been improved since first elements 11 has been tested.

  Of , can someone tell me if this option works correctly, please?

  Thank you

  Marcos

  I should be ready soon to publish my links to very detailed information on the transitions video and audio of Premiere Elements.

  But the immediate report...

  If I have two video clips cut on the timeline of 11 items first and I drag the video transition left curtain Clip, between the Clips, or right Clip, Transition adjustments pop-up will be displayed. I find no cases yet where I can stop to appear with the placement of the transition. And, in the circumstances described (2 cup clips), auto "align on" will be between the clips, and that alignment will not change when I click on adjustments of Transition Pop - Up.

  This is in accordance with the instructions from Adobe who published what to expect for the alignment of the transition for the clips trimmed and uneducated.

  If I wanted video Clip alignment Clip left or right, I would have to have chosen this option until I clicked over to the pop-up.

  Do you see something very different than when you do the same thing with trimmed video clips and video transitions in items 11 first?

  Thanks for the follow-up.

  RTA

• Portions of export with a project

  In the first of the 10 elements

  Is it possible to export a trimmed video segment of a project from one project to another?

  What I can understand from the help file, save them your work bar surface should only be checked and ready video selected, however, it is still made 7mins together, rather than 30 seconds, I want.

  Thanks in advance

  Janet B.

  You set the WorkAreaBar to cover the segment you want to export. The use of the Alt + [and Alt +] is the best way to position the start and end of the clip segments.

  

  Then, during export, you select the checkbox 'Use WorkAreaBar'. I think it's this second stage you are missing.

  

  See you soon,.

  --

  Neale

  Insanity is hereditary, get you your children

• How can I view my entire video after I do all this "Trim Comp to work area?

  I have cut a video to the work area or something using the B, then N, then right-click, Trim Comp to work area, finished doing what I want to do.

  
  My question is how I perform a zoom out to see the ENTIRE video (outside the cropped area) so I can repeat for the next area?

  Once you you ready really trimmed model. You can use the parameters of the model for extend again. Seems to me that you're basically wrong understand something here. It is not necessary to cut anything for example just limit the work area RAM Preview...