Trouble woring with several classes.

Similar Questions

• Slide with several digital poster Down filter event Bug button?

  A key event filter on a slide with several digital screens down does not work as expected when not waived. If you for example tab of this slide with two digital screens digital display, the cursor remains on his position, rather than get KeyFocus to the next control. Same behavior at fault if you want to move the cursor on the left/right keyboard, nothing happens. Anyone an idea why?

  A simulation of that VI is attached. All other controls, a Slide with a digital display or a standard digital control, the key Down event filter behaves as expected... I tested in versions 8.5.1 LV (attachment), LV2012SP1 and LV2013.

  A teammate now found a solution or workaround. We do not know if this is the way it should be, if yes, then it's a bit hidden, but it works!

  It seems that the cursor needs to know on what digital display the FocusObj is when you use the event notifier KeyDown. Then, when to get the reference of the digital display active and the wiring of this reference to the terminal FocusObj filter event everything works as expected, numbers of tabs, typed, cursor etc and have to filter and notify events structure to the event.

  A vi and a printscreen are attached.

  The question is probably due to the specialty of slides and the class NumericWithScale in general, as its digital displays are a little under References and during the implementation of the features of event KeyDown for the class NumericWithScale filter, LV simply does not know on which side of the main action control part must be executed.

  Or someone has a better solution and explanation?

• I have a lot of trouble recently with colors of the range. My software is updated, my system is calibrated with Datacolor, as in many years with her, but now I norticed much more than before out-of-gamut color images when checking this. Do not print.

  I have a lot of trouble recently with the release of the color range in Photoshop CC. The software is updated. I used to the Datacolor years to calibrate the system, and it worked well always. But now I noticed that I have a lot more images with out-of-gamut colors, and it prints wrong. Is this a problem with Adobe? The rest of my equipment is the same. Any help? I'd appreciate comments. Thank you, Emilio.

  First, the range warning applies to the proof profile that you put in place, under test format. If this is not the profile that you want to print with, there is no relevance.

  Second, range warning is a very large and imprecise indication, and I would just turn off. It shows what is out of range, but not how much. There are better ways, like proofing (even once, test format, toggle with ctrl + Y).

  You can also convert a copy of the file to print your profile and look at the histogram. If you have severe cuts, you can adjust the file accordingly.

  Third, there are people who feel the effect of threshold is best handled by the profile. In other words, doing nothing, just convert and done. I'm not one of them, just thought I would mention it.

  ------------------

  Just to put us all on the same page, here are the basics:

  There are three different color profiles here. The document profile, the profile of the monitor and the printer/paper/ink profile. If all of these profiles are good, the results will be consistent and predictable.

  So to start with the document profile. These are important parameters in the PS color settings dialog box:

  

  It can't be Adobe RGB, but there must be a standard color space (sRGB, Adobe RGB or ProPhoto).

  Then the monitor profile. The Spyder software everything for you, and Photoshop uses this profile to display the file. You don't need to do anything once the software ran - it is all set up automatically.

  You can check in Windows color management has the right profile is configured by default:

  

  Thirdly, the profile of the printer. It's one that refers to the book as "Xxx of Epson Premium glossy", or all that apply. You choose this profile in the dialog box print in Photoshop, and then you go in the printer driver ("settings") and ensure that color management is turned off it. You don't want a double color management.

  If it withdraws, and it still does not seem good, get back with more details.

  Oh, by the way - have you got your NEC monitor with Spectraview calibration software included? If you did, it is greatly preferable to the Spyder software for reasons more than I have space to list here. You can still use the Spyder probe, at least if it's generation 3, 4 or 5. Earlier versions are notoriously few reliable and also not designed for wide gamut displays.

• package with several cmdlets

  Hello
  I want to install 2 on real java card applets. They are in the same package and can use each other.
  How can I do this on JCOP?
  and what happens if they are on the packages of the difference and what happens if I use a few other lib as well? do I need to install this lib also if yes, how?
  
  BR
  Umer

  If your packages and applets are in a single project Java Card JCOP, this must be processed for you. You can have several cmdlets in a package, you can have multiple instances of a simple applet, and you can have multiple packages with several cmdlets as well as library packages.

  If you want to access an applet from another cmdlet in a single package, as a reference to another instance of the class. If they are in different packages, you use shared objects. It's because of the firewall of the applet.

  See you soon
  Shane

• Student with maximum class

  I have a question, can you guys please look at this.
  
  Two tables student and class. I want to extract data for students with a maximum number of classes
  
  I use
  
  Select student_name, count (*)
  student, class
  Student_name group
  
  The above query will give me all the students and there are several classes.
  
  I want only the name of the student with the maximum number of classes (only 1 row) and I can not use rownum.
  
  Can anyone please review this and throw some light on how to get the query.

  with t as (select student_name, count(*) as cnt
             from student, class
             group by student_name)
  select student_name
  from t
  where cnt = (select max(cnt) from t)
  

• Shortcut for the new window with several tabs

  Is it possible to have a shortcut on the desktop to launch a new window with several tabs? For example - home page is set to "www.google.com", but the shortcut opens new window with tabs "www.cnn.com" and "www.youtube.com".

  Then far,.../firefox.exe-nouveau-fenetre followed by the two URL in quotes will open two new windows. Entry - new-window "www.cnn.com" - new-tab 'www.youtube.com' will open two new windows if no instance of firefox is open, but if another window is already open, youtube will add a tab to the already open window, rather than the new window with cnn.com

  In reply to myself... withdrawal-order new window (and-new-tab), now it works.

  Looks like I'm too complicated it.

  shortened final was "C:\Program Files (x 86) \Mozilla ' 'url1'"url2.

• Functions defined by the user with several parameters

  I set features three following user using "Define."

  UF1 takes a single patameter;

  UF2 takes two parameters;

  and UFX takes two parameters - with the second is 'X' in the definition.

  

  Œuvres F1.  F2 is the EVAL of F1 version and it works too.  User functions only seem to work fine.

  F3, a function of two user settings, produces a graph of NaN.

  F4 is the EVAL of F3 version.  Note that 'B 'is not replaced by 1'.  Also produces a NaN chart.

  F5 produces a graph of NaN.

  F6 is EVAL of F5.  The 'X' is not replaced (even with the ' B' above), and even if it looks like 'X * X', it also produces a graph of NaN.

  

  Is it possible to get defined by the user, with several parameters, features work by tracing the curve?

  Hi!, Fortin:

  If you download and install the ultimate Firmware with the version of the software: 2015 6 17 (8151), with the number of Version: 1.1.2 - 11, you can trace your examples of definition of the function, with curves and values, without NaN.

• Background with several pictures

  How can I create a wallpaper for my iPad, iPhone, MacBook Air with multiple photos?

  (El Capitan, iOS 9.2.1 Photos)

  To create a collage of photos, you can create a photo book project and select a template page with several photos. Fill it with photos of your choice and print the page in PDF format.

  The themes of the book are different according to the terms of the photos and the number of photos per page.

  It's the theme travel plans:

  

  If you have installed iWork apps try Keynote to create a slide with many photos, arranged freely.

• WiFi HP ENVY 4500 with several Access Points - same SSIS Configuration

  Hello

  We just got a HP ENVY 4500.  I have a main homenetwork with a wifi Modem/Router and an old router acting as an Access Point to the floor to extend coverage.

  Both have the same SSID and password and are set to different channels.

  My HP ENVY 4500 fails to connect when the Access Point is lit.

  It will connect with it.

  Once connected, I can turn on the PA and all is well.

  The two router an AP using WPA-PSK/WPA2-PSK encriptación

  The router (that it connects to) should have a better sgnal when both are on, so I do not understand why they need the AP to be turned off to connect.

  Any thoughts people?

  Eserim

  I think he has always had problems with several access points.  Try this, what ever AP is closest to the printer, set it to channel 1.  Then try channel 11.  Try now.

• Carpet * a DVD-Ram UJ - 841S comes with several error messages

  My laptop is relatively new, I've been burning some video files in DVD - RW and all of a sudden my DVD drive has stopped working. It came with several error messages format "failed due to damage media", "format failed due to general failure" and "the inserted disc is READ only".

  I also can't rip music discs.

  Can you see ODD listed in Device Manager, and if so what is the exact status it?

  Sorry, but we discus on ODD, but nobody knows what model of laptop you have and what is the history of this problem. Is replaced the drive? Why are you sure that you are using compatible with your laptop ODD.

  Please more information!

• Interfacing with several unknown USB devices; all producing NMEA strings

  Hi all

  Question about the peripheral USB interface and their associated drivers.

  I have the obligation to build an application that interacts with the USB devices that produce NMEA strings. I have the library to parse NMEA strings, but I fight with interfacing with several unknown USB devices. When deploying applications, I know not all possible USB devices to use.

  Is it possible to produce one driver who will accept any USB device strings?

  Or, more likely, is there a way to get the LV to recognize a connected USB device and automatically find / install the driver like windows does and is it possible to do in a deployed application?

  I had a trawl of the forums, but I've not found anything that specific.

  Thanks, I really appreciate the help.

  About the VI "set up the serial port", my problem is that the choice of COM port is in a separate menu (not directly related to the VI) and it allows all possible COM ports to be selected. That can be addressed.

  I am not expecting an all-in-one solution but asked the question in case it was possible.

  What I realized, is that for my specific condition to read strings from a USB device. It is likely to be sent over a serial connection. LV can handle this well and easily assuming the device has the installed driver / settings are available.

  LV (and indeed any other program) will not work without a device driver / settings. In this case, parameters set must be found (error) / a USB RAW driver would need to be developed. Devices requirng a RAW USB driver would need a serious review to continue due to the time and effort required. All this effort is work inherited from the AIDS to navigation

  I appreciate any help and I think I got the answer I was looking for! Thank you very much

• Closure of a state machine in queue event with several parallel loops

  I am trying to find the best way to stop a program that consists of an architecture of State machine in line waiting for event with several parallel loops. Can anyone recommend the best way to achieve this in my attached VI? (To browse the forum, this seems to be a frequently asked question, but I have not found a solution that works for me.)

  I look forward to any comments on my as well code, if someone is willing to offer it.

  My program needs:

  If the user press the 'Stop' button, the program should prompt the user with "are you sure you want to stop the program?" and then return to a State of rest or move forward to stop the program. In addition if there is an error, the program should prompt the user to ' clear the error and continue, or stop the program. Then back to the idle state or move forward to stop the program.

  Architectural details:

  The program consists of 3 parallel loops: (1) a loop of event management that places different States of a queue of the State, (2) a State Machine that enters the State that is removed from the queue of the State and (3) a loop error/Shutdown, which deals with errors in the error queue management.

  During normal shutdown, where running handling loop in the case of event 'Program.Shutdown' and 'Shutdown' and the 'Idle' States are added to the queue of the State. In the state machine, the State of 'Stop' is invoked. Special "5000" error code is added to the queue of the error. In the loop of error handling and stopping, "5000" error triggered a prompt that asks the user if they want to stop the program. If the user chooses not to stop, a notifier StopNotif is sent to the State of 'Stop' and 'Program.Shutdown' event case with notification 'Go '. If the user decides to stop, the Notifier sends the notification "Stop". Loop and event management State Machine ends when they receive the notification "Stop".

  In case of error, the program behaves in the same way: If the user chooses to clear the error and continue, the program returns to the status "pending".

  HOWEVER - if the user chooses to stop the program, the program crashes. The author of the notification that is sent to stop the loop of events and State Machine management cannot be read because event Program.Shutdown and the stop State (which contain the function "Waiting to notify") are not active.

  I was able to activate the stop State by Queuing in the loop of error/Shutdown management. But I don't know how to activate the "Program.Shutdown" event by program and thus access the function "Waiting to notify" inside.

  I tried to put the function "Waiting to notify" outside the structure of the event, so the event-handling loop never ends. Placing timeouts on the "wait for declaring" and the structure of the event makes the programme of work, but I want to avoid using timeouts because I don't want to turn my event program into a program of polling stations. I would also avoid using variables or nodes property to stop loops, because that requires the creation of a control/indicator for something that the user does not need to interact with.

  Thank you!

  First of all, close the notifier outside loops with your queues.  Second, you must use a user event to send the message to the event structure loop so that it stop in the case of the stop on an error.

• problem with several graph XY axes

  Hallo,

  I'm tracing different variables in the same plot with several axes. I have the following problem (see attachment)

  the y axis secondary on the right side of the plot has a large area of him and one of the other secondary axis falls right above others. I tried it in the two labview 8.2 and 8.5 with the same results.

  any ideas?

  Thank you in advance,

  Thodoros

  Try the following movements:

  Right-click-> popup menu-> advanced-> reset scale layout

• Touch screen stopd woring with win8.1

  Touch screen stopd woring with after upgrade to win8.1

  My laptop is brand new S/N [thank you for visiting the Forums from HP Support. I'm sorry to inform you that your message needs some changes to remove personal information].
  Model 15-n02eo

  How to solve it?

  Hey hsto;

  Thanks for the updated info!

  You can also try the HP Support Assistant: HP Pavilion TouchSmart 15-n029eo PC laptop support - HP Support Assistant. It can detect missing drivers and outdated software which may help.

  You can find information on how to use it and he can do here: HP Support Assistant.

  Let me know if the documents here and in my previous post help, solve the problem.

  HP Pavilion TouchSmart 15-n029eo Notebook PC supportLet me know if the documents that I posted here and in my previous post fixes the problem. http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123086-1&cc=us&DLC=en&LC=en&OS=4158&product=6608667&sw_lang=HP Support Assistant

• HP Officejet 6500 a how to scan a document with several pages in a single file?

  HP Officejet 6500 a Plus e-All-in-One - E710n

  Windows 7 (64-bit)

  How to scan a document with several pages in a single file?  After each scan, my old printer (psc 2110) asked if I wanted to scan another page.  In the end, I got a PDF with multiple pages.

  This new creates a file for each page, and I can't find a way to create a PDF with multiple pages.

  Hi mpw101,

  You must press the Add/Remove button, to add pages additionla scanned to the existing file. If you do not see this button try decreasing the analysis DPI setting. Let me know if this helps you?