Slide with several digital poster Down filter event Bug button?

Similar Questions

• Problem of size of form with several Digital Signatures

  I created a form (liveCycle 8) with several digital signatures.  When each user signs the form, this section of the form is locked using collections.  The form is workflow by email after each user connects it.  Whenever the user signs and submits the form, the size of the form becomes too great.

  How to optimize the form to compress whenever a user signs the form?

  Thank you

  Lori

  Steve,

  After your request to publish the form, I wanted to remove some elements of society, such as the Logo.  Once I removed the Logo, I found that the biggest problem was a Logo image size which was the large file.  Once I reduced the size of the image, added only 46 KB signatures at each level of signature.

  Thank you for your help,

  Lori

• Cp6: How to stop a slide with several buttons in a nonlinear presentation?

  Hello

  I would be very grateful for a solution to this issue, as I failed to find one yet in this forum.

  The presentation is non-linear, which means that the first slide is a kind of menu that you can choose another slide to explore and always comes back to the first.

  Each slide has several buttons that activate different audio files, and there is a button on the arrow in the lower right corner to jump to the first slide.

  The problem is that the slide does not stop after that you click on some of the audio buttons and continue on the next slide (instead of take a break until the user clicks on the arrow button). When I click a few buttons and listen to audio, eventually the slide automatically continues to the next slide.

  I tried:

  • Add button click box with "break project up to what the user clicks
  • change all the buttons for timing-> break after...
  • change only the arrow for Timing-> button pauses after...
  • and will not take unnecessarily long time to slide

  Any ideas?

  Thanks in advance,

  The best

  Acted

  You don't say 'how' to play the audio? In any case, the default behavior of interactive objects that trigger a simple action is out the read head. If you replace the simple action by a standard tip action one line, the playhead is not released. Watch this video (posterous is down once, again can not point to my blog):

  http://www.YouTube.com/watch?v=M3nKi-DB6Fw

  Lilybiri

• CP4 - Pause a slide with several buttons and continue after clicking a specific button

  Hi all

  I know that a break has been discussed, with the idea that you can use a clickbox (tiny/transparent) to pause the slide in CP4.

  My problem is that I have a few buttons to show/hide a scenario/question in a slide that is suspended with a clickbox.  I would like a particular button to advance the slide (for example, the button 'Next').  Currently * any * button will UN-pause the slide even if all the buttons use advanced actions and are not defined for advnace slide to the click.

  Basically, I want to achieve this goal:

  http://kb2.Adobe.com/community/publishing/871/cpsid_87182.html

  Scroll down for the film and ignore everything apart as a result of clicking on the US/Europe/ISO buttons, you don't advance the slide. (I don't like on all counters/times etc.).

  BB

  (just in case it is useful to my slide includes):

  (1) invisible clickbox to pause at the top of the timeline (i.e. "put on the map"

  (2) an another clickbox with a legend of success/failure (that I want to advance the slide)

  (3) a "Hide" button that hides the name of a legend and shows another button (all with a tip action)

  (4) a "show" button that shows the 'hide' button and the legend (by peak action)

  (5) a couple of areas of turnover used to mimic navigation so that the user can click in the right place for (2).

  )

  Hello

  What's you point to one of my articles? Oh, I see now you are intrigued by the little film. It was created with Captivate 5 and CP4 is a little heavier.

  I just answered a question similar, but explained by adapting the user file. He wanted to have several areas to click that showed a text caption and offer the user the opportunity to click as many times as he wanted to in order any on those select boxes. Only when you click on the continue button (or click box), there should be a navigation to the next slide. If I understand you correctly, this is a similar case?

  My workflow: do NOT use multiple actions for areas of click to show/hide captions. He must not trust at all, and in addition you must go back the playback head to avoid it continues after clicking on a CB. Create a tip action for every click like this screenshot:

  

  Here, a single text of the legend was hidden, but can be extended to many of course. The last instruction (assignment) is important: it puts the read head back a frame, so that it remains before the point of interruption.

  I blogged about this type of micro-navigation once, but the examples are for CP5 and later versions:

  Micro-navigation in Captivate

  Lilybiri

• Problems with several .exe slow down my computer - see in the Task Manager.

  Hi everyone - I had posted in other sections of the forum such as: http://answers.microsoft.com/en-us/windows/forum/windows_7-files/why-does-dllhostexe-com-surrogate-consumes-memory/bd7e42bb-802d-4eb9-95b2-2bb6b566996d?page=1&tm=1416087694827

  but still have no answer to my problem - I just wanted to reference I've tried many "patches" suggested, without success.

  On the question... in addition to causing me problems of dllhost.exe, I now see a list of other authors in my task which are guilty of collaboration Manager.  The interesting thing is that I put the finger on a particular instance of dllhost.exe (COM Surrogate) who is about 8 k in size - whenever I'm deleting this one (which can sometimes be difficult to find when there are multiple instances of similar size) all other instances of dllhost.exe problem simultaneously remove themselves as well.  This is only a temporary solution as the problem will resume as soon as 10 minutes later, gobble up all my CPU and memory.

  Anyway - as I said, I noticed several other spots displayed - the interesting thing is that these tasks ALSO disappear when I delete the task of dllhost.exe k 8 initiators.

  Here is the list of the other guys who gobble up my system resources:

  dllhst3g.exe

  dpnsvr.exe

  dplaysvr.exe

  dvdupgrd.exe

  Rundll32.exe

  wiaacmgr.exe

  cmmon32.exe

  Has anyone else noticed these programs causing problems?  I would like to know how to solve this problem, but since the last message in the previous topic, it still has not been resolved by Microsoft...

  I know this post is a few months old, but I stumbled across it all fighting the same problem on a laptop of family members.  McAfee or Malwarebytes was able to track it down in my experience either.

  The task Mgr showed the same process taking a ton of memory and CPU.

  To resolve this issue, it turns that Symantec posted a tool that you can leverage.  Here is the link: http://www.symantec.com/security_response/writeup.jsp?docid=2014-111020-0511-99

  I would leverage the link Symantec before using the links of Evan (above), these links are to sites with strong ads and an EXE from a developer private.

  I hope this helps.

  -Higgins

• Single virtual channel with several digital ports

  Hi all

  I created a program that creates a task to read continuously for 3 lines of digital channels in the same unit (PXI-6133). I'm trying to figure out how I can retrieve the data from each row of port to be in a waveform graph. Currently, I use DAQmx Read instance with '1 channel N samples' but I get a waveform with all the values at the same time or a graph of waveform with the three lines transposed.

  I use Windows XP and LabVIEW 8.6.

  Appreciate any help!

  Matt,

  I'm sorry to have brought this on you but I thought about it. I misread the description of vi DAQmx create a task for a digital input. I thought that several lines of port could not be divided into several channels, but it was all physical ports.

  For those seeking another response: I was able to specify 'a channel for each line' in the task of creating, and then in the DAQmx Read task, I indicated "N channel N samples" and finally analyzed the 1 d table to get the data for each port.

  Thank you for your time!

• Problems with a digital slide switch.

  Hi all

  First off thank you in advance for your help.  Here's a description of my problem.

  I try to use a digital slide switch to adjust my z-scale on a graph of intensity.  I use several images to create a high dynamic range (HDR) image and having a slide for my z-scale to adjust it on the fly is much easier to use then manually punching in numbers.  My problem is that I'm covering about 7 or 8 orders of magnitude from min to max in my z scale.  So I need, in order to see all the data in the HDR, the slide image to cover the range of the min max value of the image.

  When I put the mapping scale logarithmic slide, so I can more separation in the values and see and scale through the easier lower end, scaling is automatically truncated to onle 3 orders of magnitude.  This does not work for me, is there a way to fix this?

  Example:

  When I put the scale to be the minimum and the maximum of z on the graph of the intensity scale in the slide.  I have values of z scale 2.47E + 7 to the max and the min 0.  The maximum value on the scale of the slide = 2.47E + 7 and the min value = 2.47E + 4.  I need the minimum value is 0.

  Thank you once again,
  ~ Daniel DeWitte

  Daniel,

  Log (0) =?  Exercise left for student.

  Try to set the property Z Scale.Minimum a small positive value such as 0.1 or 0.001.

  I created a slider and a digital control.  The minimum slider is set to zero. The CNC is an integer ranging from 0 to 20. The maximum cursor is 10 ^ (numeric). The cursor is wired for the graphic intensity ZScale.Maximum property node.

  Works very well.

  Of course, I would put the changes in a structure of the event instead of writing to the nodes property on each iteration of the loop.

  Lynn

  

• Sanitation in a course with several slides contained and question slides

  My goal is to build a course that consists of 20 ~ content slides (each has a small video conference), followed by several questions each to compose a great quiz, each answer is counted toward the degree.

  So my current configuration is as follows:

  • Each slide of the Conference is followed by question slides 1-3.
  • An attempt is allowed by each question.
  • All questions must be answered correctly before a user can move to the next slide content.
  • Each conference is preceded by another slide of content and has a button 'Next' with 'Back to the Quiz' on measures of success.
  • Failure to answer a question correctly, the user is redirected to the previous slide in conference at the Review Conference. Then the user is redirected to the slide in question failed (via a button 'Next') and the next attempt to answer the question.

  I understand the scenario of reclamation and was able to set up the first slide of the Conference, followed by 3 question slides, and everything works as I want. Button 'Next' on the slide of the Conference works properly depending on where the user came to the Conference slide of.

  However, when the user finally arrives at the next Conference slide, as soon as they click on the 'Next' button on this slide, they are brought back to the last slide in question answered: in my case, it's the third question slide after the first slide of the Conference. The loop closes just here.

  Basically, there is no way for the user to pass the second slide Conference.

  Why the button 'Next' on the second slide Conference not to go to the first slide of the following question?

  What I am doing wrong?

  Thank you.

  Lyolya

  Captivate sanitation with failure - part 1 - blog of monkeylogic

  Captivate sanitation with failure part2 - monkeylogic blog

  Lilybiri, I think that the solution to my problems is very well explained in the posts above I found last night. With a few changes, I could get my course work just as I had originally planned.

  Here's what my structure/feature class now looks like in my test file:

  Title slide

  Video conference 1

  Questionnaire1 Questions (tested with 2 questions multiple choice, 3 possible answers to each)-back to the video conference 1 first incorrect answer; go to video conference 2 success OR the second incorrect answer.

  Video conference 2

  Questionnaire2 Questions (tested with 2 questions multiple choice, 3 possible answers to each)-back to the video conference 2 as soon as the first incorrect answer; go to video conference 3 success OR the second incorrect answer.

  Video conference 3

  .. and so on.

  The notation works, too!

  I'm actually very happy to have found a solution to what seemed to be an impossible feat. Thank you for your help, I appreciate the time you took to answer my questions. As a completely new Captivate user, I think that I learned a lot in the last week, thanks to your contribution, and that of many other generous people on the web.

  Thank you

  Lyolya

• I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the doc

  I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the document (replacing the existing document) and close. Then another person can open the same document digitally sign another area of the form, save it, and close it. So on, and so on. Is there a way to do this? At the end of the day, I would end up with a PDF file with literally hundreds of signatures to enable different ACC everywhere...

  I don't understand what the problem is. In the post of the davidr96549424 on May 8, 2015 07:58 you presented a structure of a correct document. Is the issue of the creation of this structure in a PDF file? For this, you will need an Acrobat, not reader.

  XI in Acrobat, select Tools-> forms-Edit. Click 'No' on the form fields 'detect '. In the tasks Panel that opens, click on "add new field". Select "Digital Signature" and move it to the location in the document where you want to than the appearance of the signature to be. Repeat that for signature fields as you want. Users will sign by clicking on the prepared unsigned signature field which shows the dialog box "sign. Do not forget that as TSN has noted that a digital signature applies to the entire document. The entry in the document where it is is irrelevant. Each next signature covers all previous signatures.

  Your users can also sign a document from anywhere that they want without signature fields already prepared. For this select fill & sign-> work with certificates and the type of signing you want to sign up with. A dialog box that will tell you a rectangle for the appearance of signature rises and after you draw the rectangle of the dialog 'Sign' rises.

  PDF/Acrobat doesn't have a limit on a number of signatures in a PDF document. But! Don't forget that when you open a PDF file with Acrobat/Reader signatures valid all of them and takes time (several seconds - until 10 - for every signature), so if you have several signatures of dozens of their validation open can take a long time.

  I don't know how build you your workflow so that each person signs the same PDF and saves it. Economy runs on the same computer where the PDF is stored. You'll have to decide how to allow different people to have access to the same PDF. They, of course, you may sign this only one-at-a-time PDF.

• Closure of a state machine in queue event with several parallel loops

  I am trying to find the best way to stop a program that consists of an architecture of State machine in line waiting for event with several parallel loops. Can anyone recommend the best way to achieve this in my attached VI? (To browse the forum, this seems to be a frequently asked question, but I have not found a solution that works for me.)

  I look forward to any comments on my as well code, if someone is willing to offer it.

  My program needs:

  If the user press the 'Stop' button, the program should prompt the user with "are you sure you want to stop the program?" and then return to a State of rest or move forward to stop the program. In addition if there is an error, the program should prompt the user to ' clear the error and continue, or stop the program. Then back to the idle state or move forward to stop the program.

  Architectural details:

  The program consists of 3 parallel loops: (1) a loop of event management that places different States of a queue of the State, (2) a State Machine that enters the State that is removed from the queue of the State and (3) a loop error/Shutdown, which deals with errors in the error queue management.

  During normal shutdown, where running handling loop in the case of event 'Program.Shutdown' and 'Shutdown' and the 'Idle' States are added to the queue of the State. In the state machine, the State of 'Stop' is invoked. Special "5000" error code is added to the queue of the error. In the loop of error handling and stopping, "5000" error triggered a prompt that asks the user if they want to stop the program. If the user chooses not to stop, a notifier StopNotif is sent to the State of 'Stop' and 'Program.Shutdown' event case with notification 'Go '. If the user decides to stop, the Notifier sends the notification "Stop". Loop and event management State Machine ends when they receive the notification "Stop".

  In case of error, the program behaves in the same way: If the user chooses to clear the error and continue, the program returns to the status "pending".

  HOWEVER - if the user chooses to stop the program, the program crashes. The author of the notification that is sent to stop the loop of events and State Machine management cannot be read because event Program.Shutdown and the stop State (which contain the function "Waiting to notify") are not active.

  I was able to activate the stop State by Queuing in the loop of error/Shutdown management. But I don't know how to activate the "Program.Shutdown" event by program and thus access the function "Waiting to notify" inside.

  I tried to put the function "Waiting to notify" outside the structure of the event, so the event-handling loop never ends. Placing timeouts on the "wait for declaring" and the structure of the event makes the programme of work, but I want to avoid using timeouts because I don't want to turn my event program into a program of polling stations. I would also avoid using variables or nodes property to stop loops, because that requires the creation of a control/indicator for something that the user does not need to interact with.

  Thank you!

  First of all, close the notifier outside loops with your queues.  Second, you must use a user event to send the message to the event structure loop so that it stop in the case of the stop on an error.

• I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. How can I fix?

  I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. Can I fix?

  I am fairly new to this, but I think it has to do with the way you have drop them downs named. Copy you a then keep stick in each area? If so, that's the problem. You must rename each with a different number: Dropdown1, Dropdown2, etc. I think this might solve the problem.

• Object with several States and slider in the "folio" are pixelated, settings seem correct.

  I can't keep an object with several States to be rasterized text, as well as a slider which is also dithering.

  I read that you are supposed to adjust the folio, and article up to be .pdf and the cursor should have the possibility of vector chosen.

  I have not found anything to object state multi for these parameters.

  What happens is when I exit the folio to Adobe Content Viewer, only the text of these items is rasterized. All other texts to be crispy. Tested on Mini iPad and iPad retina and both are blurred.

  Is there a way to force the vector option? It seems even with the selected options it is still screening test in interactive elements.

  Thank you!

  I don't know if I missed something, but it seems to work now. Maybe the v26 option (I deleted the old folio and recreated, and it works as expected now.)

  Can you send me a link to information about the scrolling content and the position of the document? The method I used the frame was from an article of Adobe, although it could be old.

  Thanks for your help!

• Slide several boxes and align itself with several locations and reveal the button

  Hi I am developing a game where the user chooses from a range of boxes to the left of the screen and can drag the 3 of them separately from 3 boxes to right ther. each box can be moved anywhere, and the order is not important. Once the 3 boxes are all full, I want a new button to appear. I finished a tutorial and I have a box works perfectly, but no matter what I try, I can't work with several boxes and locations. Here is a list of the instance names of film clips more my actionscript. I have attached a link to the flash file. Any help would be really appreciated. See you soon

  LINK

  http://www.sainters.NET/flash_preview/flash_test/Flash test_v6.fla.zip

  INSTANCE NAMES

  1 box = 'circle_mc.

  Box 2 = "circle_mc2."

  the two grey boxes are called = "targetCircle."

  ACTIONSCRIPT

  function dragSetup (clip, targ) {}
  clip.onPress = function() {}
  startDrag (this);
  this.beingDragged = true;
  };

  clip.onRelease = clip.onReleaseOutside = function () {}
  stopDrag();
  this.beingDragged = false;
  If (eval (this._droptarget) == targ) {}
  this.onTarget = true;
  _root. Targ.gotoAndStop (2);
  } else {}
  this.onTarget = false;
  _root. Targ.gotoAndStop (1);
  }
  };
  the following variables can store the start position of clips
  clip.myHomeX = clip._x;
  clip.myHomeY = clip._y;
  the variables below are going to store the position of end of clips
  clip.myFinalX = targ._x;
  clip.myFinalY = targ._y;
  clip.onEnterFrame = function() {}
  all these actions basically just to say "If the mouse is in place (in other words - the clip is not moved).
  then replace the MC to its original start (with a smooth movement) point ".
  If (! this.beingDragged & &! this.onTarget) {}
  This ._x-= (this._x-this.myHomeX)/5;
  This ._y-= (this._y-this.myHomeY)/5;
  If the circle is moved on any part of the target, it slides toward the center of the target
  } else if (! this.beingDragged & & this.onTarget) {}
  This ._x-= (this._x-this.myFinalX)/5;
  This ._y-= (this._y-this.myFinalY)/5;
  }
  };
  }

  dragSetup (circle_mc, targetCircle);

  You can probably do all the things you want to do.  I will make them for you well.  Trying to figure out how what I've provided works and then try to reason things for the changes you want to perform.

• I'm stuck with several GB of music files on my phone and I can't get down them!

  The other day I tried to install an application on my phone, but I didn't have enough memory.  My phone is full of music via iTunes synchronisation dock. So I connected it to my computer to try to make some more room. But there is a problem.

  (1) Apple does not play nice with Palm. Synchronization is no longer permissible or possible. I can't use iTunes to manage/delete music.

  (2) in USB Mode, there is no way to access/view the library. It's just not there.

  I tried Palm support, and they confirmed that the USB Mode is not working. I guess that the library is located in a hidden folder or directory. They suggested that I downgrade my iTunes. Goal that is unacceptable to me because one) it forces me to break the license Apple, b) it is not taken in charge, and c) if there is still a remote chance it will mess up my iTunes library, I won't.

  I'm ready to get off at Palm headquarters and throw my phone to their building.

  Can someone tell me how to delete my library without hacking iTunes?

  I thought about it. Support, put this in your KB. Everyone who was sync via iTunes on a Mac is currently STUCK with several GB of music on their phone that they cannot manage or remove, which makes the Palm Pre a lot less useful than announced.

  USB mode is a waste of time for people on a Mac. These hidden files are never going to be visible, and the library cannot be removed. The solution: go through a PC. Anywhere, any PC will do. Connect your phone to the PC, go to the USB drive Mode and show hidden files, then delete them from there.

  I got an old laptop lying around at the bottom, and the problem was solved lickety split.

• Smart txt reflow - how do you work with several text boxes?

  Hello

  I create ID cards to work, for 650 employees. I had used the reflow of text before smart on other jobs and I don't foresee any problems with its use for this project. To explain my problem:

  I'm doing a template with a trial of ten employees file. The design on each card, it is a name and a unique ID to be used. The name is 18pt and code 10pt.

  On my main page, I have a block of text for the name and a text block for the employee ID. The text blocks are as wide as the work plan but only high enough to adapt to a single name by image to the relevant point size.

  On the first page of my document, I select 'place' and then select the text file with all the names, I get the change of cursor in the image of the text, I hold SHIFT for the debit option and click on my name text box. InDesign automatically creates 9 new pages, and I now have a 10 page document. So far, perfect.

  I select "place" again, choose the employee code text file, click on my block of text in code used on the first page, and repeat the same process as above.

  My problem starts - I want codes for the employee to just flow through ten pages, as the names, but when I place the codes file and select the text on the first page, inDesign creates 10 new pages after the tenth page. So I find myself with 20 pages - the first ten pages with names and nothing in the code text boxes and the last ten pages with the codes but nothing in the name text boxes.

  I am at a loss as to why he does this. I was playing with the settings in the preferences, but nothing changes. I tried to select both the two text files and import at the same time.

  How do you work with several text boxes and several import of text file on a doicument? There are no extra spaces or something like that in my text files.

  I really don't want to have to link all text blocks - that will forever, but right now it's the only way I can get it to do what I want.

  Also, is there anyway to specify the font and the size of the text is important as? Because it keeps import as minion pro, even if the text boxes on the master are set to the correct font and size. Not a big deal though.

  Help, please! Any help is appreciated, thanks in advance!

  Ah, I think I misunderstood your original post and thought you wanted to do 10 badges per page. If it's only one, you need only a set of images. Same procedure for setting in place, but you have no need to screw anything or use the step and repaet to make copies.

  Place the file name in the frames of name and ID will add pages and then return to the first page and place the numbers. Just don't forget to put the bad slider in the space where the framework and to stay away from the guides (if you click on a guide, ID will ignore masters executives) and hold down the SHIFT key when you click.