Truncation always checked for some of the dimension tables

Similar Questions

• Cannot update 3,010 FF.; Downloaded 3.6: impossible to copy in the app folder "the operation cannot be performed because you don't have sufficient privileges for some of the itemss.

  I had FF 3.0.10 for two years. My preferences are set to automatically check updates, my for a reason, it apparently never worked. I am the administrator for my Mac and have read/write permissions. The manual "check for update" under the menu help is disabled and will not work. " I tried to reset the permissions, quit and restart several times. At a given time, the window ' check for updates ' seems to be enabled, but froze when he started the download and came back to grey again. I tried to download 3.6 on your site, but when I try to drag FF in the app, I get a message that says "the operation cannot be performed because you don't have sufficient privileges for some of the items. Through it all, I noticed that my download folder is gone from the dock on my screen

  • Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
  • Trash the current demand for Firefox to do a cleanup (re) install.
  • Install the new version you downloaded.

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

• How to replace "apply downloaded update now" with "Check for Updates" in the menu help when the update fails because the downloaded update files are missing but the "Ready to install update" window keeps appearing?

  Question

  I have another type of problem with Firefox

  Description

  Window "Ready to Install" Firefox "Software Update" appeared. The folder "C:\Program Files\Mozilla Firefox\updates\0" contained the files update.mar, update.status and update.version. Each of the 3 files have been deleted. The next time that Firefox has been started, no update occurred because update files were missing. In the Menu bar, clicking Help showed in the menu drop-down that "apply downloaded update now" was always on the list. By clicking on "Apply downloaded update now" open "Software Update" window "Ready to install update", so that Firefox still considers that the update files exist, but they do not. In the window "Software Update", by clicking on "Restart Firefox" restart of Firefox, but once again it there's no update, and remains "apply downloaded update now" on the Help menu. How can "Apply downloaded update now" be replaced by "Check for Updates" so the update files can be downloaded?

  Version of Firefox

  3.6.3

  Operating system

  Windows XP

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; RV:1.9.2.3) Gecko/20100401 Firefox/3.6.3

  Plugins installed

  • npmnqmp - 989898989877
  • NP-mswmp
  • Adobe PDF plugin for Firefox and Netscape "9.3.2.
  • Default plugin
  • Foxit Reader plugin for Firefox and Netscape
  • Shockwave Flash 10.0 r45
  • Version 1.0.3 copyright 1996-2009 The VideoLAN Teamhttp: / /www.videolan.org/

  You can manually reset the software update feature by closing Firefox and remove the file "updates" (which seems you have done) and the two files "active - update.xml" and "updates.xml" - these are in the installation (C:\Program Files\Mozilla Firefox) directory or in the profile folder (C:\Documents and Settings\nom_utilisateur\Application Data\Mozilla\Firefox\Profiles\something.default).

  If it does not, see our KB article How to resolve the failure of the update of Firefox update error message - the section of 'last resort' can be useful, or or read this article from MozillaZine KB, software update.

  Please let us know how the above work, and if we can be of further assistance.

• always check for all messages after sending a message

  Windows Mail is always check for all messages after sending a message - what is long because I have several folders subscribed, etc.

  Is it possible to set up Windows Mail is not to do an audit of all accounts mail when sending a message?
  Thank you

  Its not supposed to do.  If you just send the message, it must go in your Outbox and leave.  Try to compact and repair the database and see if that has an effect (see www.oehelp.com/WMUTil/).

  Steve

• For some reason, the tab 'Base' is missing from my file to develop trying to change using LR5... ? Help, please

  For some reason, the tab 'Base' is missing from my file to develop trying to change using LR5... ? Help, please

  Right-click (Cmd-click Mac) on another connector for Panel as "tone curve". Make sure there is a check mark for Basic as all other sections of the Panel you want to display.

• How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please?

  How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please? If possible, please cover all platforms, Mac, Windows, Linux, although the first mentioned is what currently applies to my situation.

  Thank you.

  Such a download is usually recorded in a updates or updates folder in the program folder or the Firefox application.
  You can delete this folder to cancel the download.

  If the files have already been downloaded, then delete the files in the folder updates\0 and updates.

  • http://KB.mozillazine.org/Updates_reported_when_running_newest_version
  • http://KB.mozillazine.org/Software_Update

  Mac: /Applications/Firefox.app/updates "/path_to/Firefox.app/Updated.app"
  Linux: "/path_to/firefox/updated"
  Windows: C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  

• After installing ElCapitan 10.11.4 on my G5, if I stopped for the night for some reason, the computer starts again sometime between 03:00 and 07:00. Any thoughts?

  After installing ElCapitan 10.11.4 on my G5, if I stopped for the night for some reason, the computer starts again sometime between 03:00 and 07:00. Any thoughts?

  Sounds like an Energy Saver preference, but what computer do you use?  A G5 (PowerPC) machine will not work on El Capitan.

• Is that the compress/decompresss utility file supported by all types of window OS? or for some region the user install it?

  Hi all:

  Is the Compress/decompress utility file supported by all types of Windows OS (XP, VISTA, Windows 7)? or for some region the user install it?

  Any link from the website of Microsoft?

  I managed to get the guide from the Microsoft web site, but just a guide without a show of declaration of default installation during installation of the operating system.

  Window XP:

  http://support.Microsoft.com/kb/306531

  Windows Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/compress-and-uncompress-files-ZIP-files

  Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/compress-and-uncompress-files-ZIP-files

  Thank you.
  Coulombe

  Hello

  Compress and decompress are not a separate tool/utility to download and install in the computer. They have functions that come with these 3 operating systems. These features are available in Windows XP/Vista/7 from across operating systems.

  However, you can also use your favorite search engine for non-Microsoft applications to compress and extract files such as Winzip and Winrar.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  It will be useful.

• Error "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. "after replacing hard drive

  I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

  The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

  I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

  Operating system is Vista 64 bit.

  Original title: Windows Update

  I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

  The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

  I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

  Operating system is Vista 64 bit.

  After the upgrade to the bigger hard disk, I found that the technology Intel Rapid Storage Technology driver should be updated. Once this is done Windows update ran properly. Microsoft Fixit did not help in this circumstance.

• Cannot install Windows update, the error message "" Windows update canoe currently check for updates, because the service is not running ".

  Initial version of updated title: windows

  My "Windows update" is not updated. The problem started recently and its shows the error message "Windows update canoe currently check for updates, because the service is not running. You may have to restart your computer "." I tried it with several reboots, but there still is not up to date. Kindly help.

  Hello

  Have you made changes on the computer before this problem?

  Method 1:

   

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Try the procedure described in the following article and check the status of the issue.

  http://support.Microsoft.com/kb/822798

  Restart the computer and check it please for windows update.

  Hope the above information is helpful.

• Can't get updates for Windows, "Windows Update cannot currently check for updates, because the service is not running." You may need. "" Restart your computer.

  When I try to install the updates I receive the message "Windows Update cannot currently check for updates, because the service is not running."  You may need. "" Restart your computer,   It does not also. check me the update history

  Hello

  1. you made any hardware or software changes the computer recently?

  2. What is the number of update?

  3. do you get this message for all the updates?

  Follow these methods and check if that helps:

  Method 1:

  Step 1.

  Unplug all external devices, restart the computer, and then try to install updates.

  Step 2:

  I suggest that you follow the steps mentioned and try to start the Windows update service.

  Check if the following services are running.

  (a) Background Intelligent Transfer Service

  (b) cryptographic Service

  (c) Windows Update

  (d) Windows Installer

  a. Click Start, type "services.msc" (without the quotes) and press ENTER.

  b. double-click the service name in the Services list.

  c. under the general tab, next to startup type, make sure that automatic is selected.

  d. If the service is not already running, under Service status, click Start and then click OK.

  e. once the services are started and defined as running, try to install the updates and check.

  Method 2.

  You can follow the steps in this article: http://support.microsoft.com/kb/2509997

  Warning check disk.

  Important: All by performing the check disk on the hard drive if bad sectors are found then check disk try to repair this area, all available data on this sector can be lost.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  See also: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• "The Windows Update cannot currently Check For Updates, because the Service is not running. You may have to restart your computer.

  Unlike before, I can't launch the Windows automatic update service now, I suspect that my computer is infected virus, I just install demo version free of McAfee internet security and run a full scan, no infection has been detected.

  Description:

  When I click on Windows update for all programs at startup, pop out window update, and then I click on "check update", out another part: list "" Windows Update cannot currently Check For Updates, because the Service is not running. "You may need to restart your calculater ', then I restart the computer a few times, the same problem still persists. before I was using microsoft essential secruty with no problems, but now I can't seem to complete the definition of update, so I think this problem could be related to Windows Update and decide to uninstall MSE and replace it with McAfee, but it does not work.

  any help and suggestions would be very appreciated.

  Hello

  Steps 2 to 6 to identify the program that is causing the problem if the clean boot solves the problem.

  Try the procedure described in the following article to improve your computer's performance.

  Optimize Windows 7 for better performance.

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Ways to improve your computer's performance.

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

• After installing Windows 7 using MDT, Windows displays the message "Windows Update cannot currently check for updates because the service is not running.

  Hi all

  I worked on creating a better system for my business get an OS up-to-date with all the required software, settings, and drivers. I have previously using WDS as autonomous and just syspreping images and pushing them up until he became incoherent and corrupting of the parts of the image. I did a little surfing on the web and discovered that many computing professionals use MDT to produce images of quality with all the customization they need. So that's the problem.

  The image works fine. I'm able to customize the way in which I need to and get most of my successful deployed pilots (problem with trackpad drivers), but the error message I get when I try to run a windows update is "windows that update cannot currently check for updates because the service is not running." After I received this message I check my services and it shows the update of Windows running service and long-term as well running services. Tried to restart as suggested and still no results. Undertook research for a possible fix and still nothing.

  Any help?

  It became quite a headache for me. Thank you guys

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the installation of Windows Update.

  If you your computer are connected to a domain network?

  If Yes, then post your query in TechNet forums because they have more expertise in this issue to help you better. Please follow the below link to do the same.

  T echNet Forums for Windows 7 
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

• I installed the free trial version of lightroom. For some reason, the develop module is just a blue screen. I tried to uninstall and reinstall. I have a new computer with the latest version of windows etc.

  I installed the free trial version of lightroom. For some reason, the develop module is just a blue screen. I tried to uninstall and reinstall. I have a new computer with the latest version of windows etc.

  Go in Edition > Preferences > Performance and uncheck CPU graph use.

• One of the pages of my site moves to the right when using anchors to scroll. I checked for Ghost off the page boxes and checked that all my 100% width images are actually 100%. I discovered that this problem is in Chrome and do not hap

  One of the pages of my site moves to the right when using anchors to scroll. I checked for Ghost off the page boxes and checked that all my 100% width images are actually 100%. I discovered that this problem is chrome and does not happen in Firefox. Any suggestions?

  Thank you Brad, my ankles were lined up however they were in the Center. I am proposing to-100 and it solved the problem. Thanks for your help.