Try to change the active patrician size
Hello..
Hello
Tags: Windows
Similar Questions
-
I'm at my wits end, trying to make my icons on the smaller desttop, I tried everything but when I try to change the No. 1 to no. 2, which is smaller than a message comes up saying THAT NAVIDIA Display Panel Extension can not be created?
I checked my drivers and updated if necessary so don't know how to get this sorted out can someone help
Hello
Are you try right click on empty office > view > change the size of icons it (use Classic icons for the smaller)?
Or use your mouse wheel and the Ctrl Key to do so.
Read the information on this link.
http://www.mydigitallife.info/how-to-resize-and-change-Vista-desktop-icons-size/
See you soon.
-
Cannot change the active title bar
Hey people.
I use a HP Envy (Windows 7, etc.), a year or so old, but I just did a reset complete system - a few days ago. It is therefore running (approximately) on the parameters of the box.
However, I have problems by changing the settings of the active title bar for programs that do not have their own settings of active title bar (think Windows Explorer vs Google Chrome). This has caused some problems, especially for things like Mathematica, where the menu under the title bar is screwed up. More important still, it seems just ugly.
Unfortunately, go into the settings of customization (including advanced settings) in Control Panel does not work. In fact, the parameters are essentially the value by default and cannot not even match at the exit. It is quite confusing.
Any help would be greatly appreciated. Please let me know if I can provide more information on the parameters, specifications, etc.
Hello
Thanks for posting the request in the Microsoft community forums.
I understand that you can not change the active title bar on Windows 7.Please answer the following questions:
1. you receive an error message on the computer?
2. what happens when you click on personalization in Control Panel?
3. don't you make changes on the computer before the show?I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
Try the troubleshooting steps provided in the links and check.Method 1:
Put the computer in a clean boot state, and check if the problem is caused due to any third party software.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.Method 2:
To resolve the problem use (SFC.exe) System File Checker tool to determine which file is causing the problem, then replace the file. To do this, follow these steps:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833In the future if you have problems about the title bar active on Windows 7, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.
-
I just bought an iphone 6 s second part and I got home put my SIM in there turn it on you try to start the activation process and he says that the phone is lock icloud, I tried calling get him etc. but he gave me the wrong information and I called apple, they said that its nothing they can do without evidence of perchise im broke I spent all my money on the phone, does anyone know any software free or something me please txt to 9102612856
@Santonio99
You probably bought an iPhone stolen 6. Mine was stolen in Barcelona in Spain on June 10 by a pick-pocket. Fortunately, there is absolutely nothing you can do to make an iPhone locked to the activation of the work. You have a paper weight.
-
Hello
When I opened a NEW TAB, it loads 'Bing' - no matter what I try! especially to try to change the configuration settings!
(Note I recently installed DivX player / converter / movies.. .is this the cause?)
Then... on desktop... .double click on Mozilla... .loads ok
Open a new tab..it loads Bing! & I hate it!Ive tried;
1.Tools - options - addons - extensions & plugins - cant see anything there? 2. On the small address bar (top right) which allows search engines to be managed - all cleared down except google & yahoo 3. Tools - tab mix plus options - New Tabs - Load on new tabs set to Home Page (doesnt let me change it - greyed out url (conduit.com - see 5 below) 4. Tools - tab mix plus options - New Tabs - Load on new tabs set to new tab Page - displays the url below (5) but if I try to edit it reverts back every time 5. If I enter "about:config" & then "browser.newtab.url" in the URL bar I get browser.newtab.url;http://search.conduit.com/?ctid=CT3321897&octid=EB_ORIGINAL_CTID&SearchSource=69&CUI=&SSPV=&Lay=1&UM=5&UP=SP88BDE404-3DB6-49C4-97F5-96A64775CC57 - rightclick on the selection and type 'reset' IT WONT CHANGE please can you help me?
Thank you
Stuart
I see no mention of the duct. com in your initial post. It is often a good indication that you will taken place unwanted software.
-
"When I try to change the words in firefox search does not accept... g e. I type in the search for"Joe Bloggs"and then try to change her search to search for"Joe Bloggs"Football it trying to connect briefly and then displays the results of the previous search" Joe Bloggs "and added words 'Football' no longer appear in the search bar.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.org/KB/safe+mode
-
I just installed Firefox 4 today. When I try to change the settings for keyword.url in topic: config to make one "I'm Felling Lucky" Google search, it just resets to chrome://browser-region/locale/region.properties whenever I restart Firefox.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).
- Makes no changes on the start safe mode window.
See:
See also:
-
VB6 crashes when you try to change the power on the DIO state using NIDAQmx.
When I try to change the power of digital output to a PCI - 6220M cardusing VB6 and NIDAQmx software, my plant of VB6.
I have request to build a VB6 for the same card read all digital out and analog in, digital. This app works very well. I can't just change the power to high status.
Hello Sir,
I found a post on our discussion forum to a client who was trying to do the same thing as you and also ran into a crash of VB6. In his case, the accident was caused by an incorrect setting during the call to the function.
The first part of the post office treats the correct settings. The second part of this post does not apply to your configuration, your type of card that supports under the power state.
Please keep us informed of your progress.
Kind regards
Wouter
OR Belgium
-
Can I programmatically change the active group on a Hypertrend in DSC?
I would like to know how to change the active group of a hypertrend program in Labview DSC. I saw a link that says it can be done at Lookout. But in the module DSC, the active group is read-only.
I know a hard way to do it. I could save the settings of hypertrend as xmlSettings in a temporary file. The active group is one of the parameters. I could then change the group active in this file text to point to the new group, and then reload the settings. But this isn't a clean way of dong it.
Anyone know if there is an easy way?
I found a way to do it but not very clean. I don't know why there is no function to change the current group.
Here's how I did it.
-
FRX Drilldown Viewer Error Message When you try to change the destination printer
Hello, I have a bit of staff (I'm just technical support) which is affected by the following error message when they try to change the printer output
in FRX Drilldown Viewer: "error: 0 Cccurred in: APIPrintCommonDialog().
I hope that some useful information about the system:
They use the application of visualization FRX exploration down in a Citrix XenDesktop environment. It runs on Windows Server 2008 R2, Enterprise Edition (SP1).
The OS is a 64-bit version with 8 GB of RAM installed.
Please feel free to respond with any need for additional information. I tried to search the event logs, but was unable to find anything of use... maybe
could someone point me in the right direction, it?
Thank you very much!
AnthonyHelloThanks for posting the question.The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. -
'apply' button is not available when you try to change the resolution
Original title : too high resolution
Unable to access the "apply" button when I try to change the resolution - the screen is too big
CANNOT ACCESS THE BUTTON 'APPLY' WHEN I TRY TO CHANGE THE RESOLUTION - THE SCREEN IS TOO BIG
There is no need to. Just press enter on your keyboard key. It's the same thing by clicking on the apply/OK button.
-
How to change the default font size in Word pad
How to change the font and size of the default settings in wordpad?
Thank you
You can change the font and size and then save it as a template - ex: default.wri
Navigate to this file and make it read-only. Create a shortcut to it and use it as WordPad in the future.
It will always come back with the font settings that you put, but you will need to save it under a new name every time (you usually do in any case).
There is no other way to keep the settings of fonts in WordPad.
-
Failed to create the Direct3D device. try to change the resolution or color depth
When I try to open the game this message is impossible to create the device come direct3d. try to change the resolution or color depth
Please help meHello
1. what game are you talking about?
2. have there been recent changes to the computer before the show?
I suggest to follow the steps provided and check if it helps.
DirectDraw or Direct3D option is unavailable: http://support.microsoft.com/kb/191660
DirectX: Description of the DirectX Diagnostic tool: http://support.microsoft.com/kb/190900/en-us
Hope this information is useful.
-
Original title: WINDOWS firewall
I GET A MESSAGE WHEN I TRY TO CHANGE THE WINDOWS FIREWALL SETTINGS - "DUE TO A PROBLEM NOT IDENTIFIED, WINDOWS CANNOT DISPLAY WINDOWS FIREWALL SETTINGS. HOW CAN I SOLVE THIS PROBLEM?
IN ADDITION, I USE AVG INTERNET SECURITY 2013 AND THAT THE FIREWALL IS ENABLED AND I SEEM TO BE PROTECTED.
Documentation AVG Internet Security 2013 States:
Recommendation:
Generally it is not recommended to use more than one firewall on a single computer. Computer security is not enhanced if you install several firewalls. It is more likely that some conflicts between these two applications will occur. Therefore, we recommend that you use only one firewall on your computer and disable all others, thus eliminating the risk of potential conflicts and problems related to this.
You can read the AVG documentation by clicking on this link, and see section 6.5:http://AA-download.Avg.com/filedir/doc/AVG_Internet_Security/avg_isc_uma_en_2013_06.PDF
So, if you are using AVG firewall, it's wise to just disable the XP firewall for more than a firewall running at the same time can lead to performance problems. Choose one or the other, but not both.I thought installing AVG would understand this by itself, and you know what to do (used to) but I do not want to install AVG to see.
-
original title: access denied errors when you try to change the beginning upward in xp sr CIP 3 msconfig. I am the administrator, please the administrator
I am a user with privileges under windows xp pro service PAC 3. I recently received an access denied error message acusing me of not being the administrator when I tried to limit the start up programs in msconfig. What should I do these changes in safe mode?
You have scanned your system for malware? It seems its infected with something. Download ccleaner install / run. Then go to tools / startup. Delete the entries that you want here
Maybe you are looking for
-
The home page appears only in this way, when I use Mozilla, but NOT when I use Internet Explorer. The first screenshot, this is what it looks like in Mozilla. The second screenshot is what I WANT it to look (it looks like this in Internet Explorer).
-
Hello I bought a Toshiba Dynabook ss 2000 80 p/2, with Win XP installed. My question is: could someone tell me where I can find the driver for Trident CyberBlade XP Ai1? It would be nice. Thank you. Dieudo.
-
Removal of Installation failures
How to remove installation failures 'X' from my update history list?
-
CAN NOT CONNECT TO MY PC AFTER THE HOLIDAYS
am administrator tent for the log-in, using Windows Vista, cannot! used all possible variations of passwords, but still cannot po newspaper help needed immediately please. Just back from 2 weeks holiday. Thanks, Mollymoo1952
-
Why not tell the functionality of the Anit-Virus software health report?
Information Symptom: The Security Center has not recorded an antivirus product. Cause: The Security Center is unable to identify an active antivirus application. There is no product protection antivirus installed or it is not recognized. Resolution