Try to cure a bottleneck of the circular network

Similar Questions

• get the circular rotation "dots" (and freezing) every few seconds.

  WHEN YOU LOOK AT A SEQUENCE ON U-TUBE (FOR EXAMPLE), THE PROGRAM BREAKS EVERY FEW SECONDS AND THE CIRCULAR SPINNNING "DOTS" APPEARS.

  Hello

  If I understand any video file needs to view must first release all what is common on most of the computer or laptop until you have very high speed internet the watercourses will be lower. Maybe you can try to install different browser as Firefix & Chorme and do check out as well.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• I have a music library of about 7.6 GB.  I have an old nano iPod which has a capacity of 8.0 GB. When I try to sync my library on the nano it accepts only about 1.68 GB.  How can I fix?

  I have a library of about 7.8 GB of songs iTunes music.  I have an iPod nano to 8.0 GB.  When I try to sync my music on the iPod the IPod does accept that about 1.68 GB.  I tried to restore and re-synchronization-the same results.

  JEB

  Are all your songs stored locallyin your computer's iTunes library?  iTunes cannot sync the songs that are accessed by streaming from Apple servers ("iCloud").  To check, find a song that does not sync your iPod to your iTunes library.  Do a right click and get information.  On the tab of the file Info window, browse to the location.  This site shows a path of the file to the location the file of that song on your drive, or should I say iCloud?  Expressed the iCloud, download it.

  If this is the General reason why much of the music library will not sync to the iPod, you can select the pieces all affected at the same time, right-click on the selection and download.  Once all the music files are stored locally, they sync to iPod.

  If this is not the cause of your problem, thanks for posting back with all additional details, such as any error message that appears when you attempt to sync.

• Old ID is constantly on the phone and I can't change it: try to upgrade of storage, but the old ID happens and I can't change it.  In settings/applications

  Old ID is constantly on the phone and I can't change it: try to upgrade of storage, but the old ID happens and I can't change it.  In settings/applications & iTunes the correct ID is set but not in the settings/iCloud

  Is this a separate id, or you have successfully updated the primary e-mail address on the account? You can disconnect an account iCloud through settings > iCloud > Sign Out, and then log back from the other/updated id to update

  If you have updated the main email address: what to do when you have changed your Apple ID email address or password - Apple support

• I had two apple ID, but only now have access to one of the e-mails. When I try to login, it differs on the account that I no longer have access to. How can I change my information to my * account?

  I had two apple ID, but only now have access to one of the e-mails. When I try to login, it differs on the account that I no longer have access to. How can I change my information to my * account?

  < email published by host >

  As you know that these are user forums, it is not a good idea to post your e-mail address on a public forum - I asked the host to remove it.

  What "information" do you want to go? You can transfer iTunes downloads to another account, or to merge accounts - all downloads are permanently associated with the account that has downloaded (if only this account can potentially re-download purchases, downloads of updates of its applications, authorize such purchases on iTunes from the computer, and make in-app purchases in them).

• I find several pages open at the same time when I try to open certain bookmarks in the subject: home page.is this destiny? but this behavior is intermittent

  I find several pages simultaneously open in firefox when I try to open a link in the bookmarks stored. It is divide the subject: homepage in two and simultaneous display of two pages.
  I really like this. But this feature is planned.
  I find this intermittent behavior and not happening for all the links.
  If firefox has a feature to open several windows as it's going to be great other than the separator add on

  Opening in the sidebar is the default value for the bookmarks created via a link or a button on a Web site.
  
  You can view the properties of a bookmark using the context menu in the side bar (Ctrl + B; Command + B on Mac).
  
  In the Bookmark Manager (Bookmarks > show all bookmarks) you can click on the button more in the lower details pane on the right.
  
  Make sure "Load this bookmark in the sidebar" is not selected.

• When I try to post a comment of the page greys out but nothing else happens, and the comment is never displayed.

  When I try to post a comment of the greys out page. Click on again restores the page, but the comment is not validated. Repeated clicking on "post comment" just of patterns graying out and restoration. I use 14.0.1 on win7 (64).

  Problem solved. When I deleted the cache and cookies and reconnected on the site, everything was OK. Thank you both for the answer so quickly.

  Gabe

• When I try to charge my ipad since the if please, but by simple answers that I am not computer.

  When I try to charge my Ipad to the wall outlet, it will not load, can someone help me please, but with simple answers step by step because I'm not computer literate.

  it to plug the laptop or pc?

• I can't change the discripter KING of the circular edge detection

  Hello

  I need to find the find of circle using the circular edge detection. Here, I need to change my KING. so I used the property Node display.

  But I can't change my KING.

  I've attached my VI file

  I understand that you want to change your return on investment... have you checked the link I provided in the previous post?
  -KING of the ways showing different coordinates, how you give their evolution?
  -simply by selecting the property KING will give nothing unless you draw something in the indicator of the image. For example, when you select the tool KING and draw something so the return on investment parameters will be passed to the property node.

• Whenever I try to enter an address for the email, I get MSN.

  Original title: fall MSN.

  Whenever I try to enter an address for the email, I get MSN. When I use my address book there is no problem

  Hello

  1 are you facing the issue only when you use an MSN account?

  2. what web browser do you use?

  3. have you made a recent software or hardware changes to the system?

  If you are faced with the question with MSN mail, you can contact support MSN for further assistance.

  How to contact MSN customer service

  If you are an MSN subscriber, you can also publish in the MSN Forums:

  https://answers.MSN.com/product.aspx?ProductID=30

• Smart way to save large amounts of data using the circular buffer

  Hello everyone,

  I am currently enter LabView that I develop a measurement of five-channel system. Each "channel" will provide up to two digital inputs, up to three analog inputs of CSR (sampling frequency will be around 4 k to 10 k each channel) and up to five analog inputs for thermocouple (sampling frequency will be lower than 100 s/s). According to the determined user events (such as sudden speed fall) the system should save a file of PDM that contains one row for each data channel, store values n seconds before the impact that happened and with a specified user (for example 10 seconds before the fall of rotation speed, then with a length of 10 minutes).

  My question is how to manage these rather huge amounts of data in an intelligent way and how to get the case of error on the hard disk without loss of samples and dumping of huge amounts of data on the disc when recording the signals when there is no impact. I thought about the following:

  -use a single producer to only acquire the constant and high speed data and write data in the queues

  -use consumers loop to process packets of signals when they become available and to identify impacts and save data on impact is triggered

  -use the third loop with the structure of the event to give the possibility to control the VI without having to interrogate the front panel controls each time

  -use some kind of memory circular buffer in the loop of consumer to store a certain number of data that can be written to the hard disk.

  I hope this is the right way to do it so far.

  Now, I thought about three ways to design the circular data buffer:

  -l' use of RAM as a buffer (files or waiting tables with a limited number of registrations), what is written on disk in one step when you are finished while the rest of the program and DAQ should always be active

  -broadcast directly to hard disk using the advanced features of PDM, and re-setting the Position to write of PDM markers go back to the first entry when a specific amount of data entry was written.

  -disseminate all data on hard drive using PDM streaming, file sharing at a certain time and deleting files TDMS containing no abnormalities later when running directly.

  Regarding the first possibility, I fear that there will be problems with a Crescent quickly the tables/queues, and especially when it comes to backup data from RAM to disk, my program would be stuck for once writes data only on the disk and thus losing the samples in the DAQ loop which I want to continue without interruption.

  Regarding the latter, I meet lot with PDM, data gets easily damaged and I certainly don't know if the PDM Set write next Position is adapted to my needs (I need to adjust the positions for (3analog + 2ctr + 5thermo) * 5channels = line of 50 data more timestamp in the worst case!). I'm afraid also the hard drive won't be able to write fast enough to stream all the data at the same time in the worst case... ?

  Regarding the third option, I fear that classify PDM and open a new TDMS file to continue recording will be fast enough to not lose data packets.

  What are your thoughts here? Is there anyone who has already dealt with similar tasks? Does anyone know some raw criteria on the amount of data may be tempted to spread at an average speed of disk at the same time?

  Thank you very much

  OK, I'm reaching back four years when I've implemented this system, so patient with me.

  We will look at has a trigger and wanting to capture samples before the trigger N and M samples after the outbreak.  The scheme is somewhat complicated, because the goal is not to "Miss" samples.  We came up with this several years ago and it seems to work - there may be an easier way to do it, but never mind.

  We have created two queues - one samples of "Pre-event" line of fixed length N and a queue for event of unlimited size.  We use a design of producer/consumer, with State Machines running each loop.  Without worrying about naming the States, let me describe how each of the works.

  The producer begins in its state of "Pre Trigger", using Lossy Enqueue to place data in the prior event queue.  If the trigger does not occur during this State, we're staying for the following example.  There are a few details I am forget how do ensure us that the prior event queue is full, but skip that for now.  At some point, relaxation tilt us the State. p - event.  Here we queue in the queue for event, count the number of items we enqueue.  When we get to M, we switch of States in the State of pre-event.

  On the consumer side we start in one State 'pending', where we just ignore the two queues.  At some point, the trigger occurs, and we pass the consumer as a pre-event.  It is responsible for the queue (and dealing with) N elements in the queue of pre-event, then manipulate the M the following in the event queue for.  [Hmm - I don't remember how we knew what had finished the event queue for - we count m, or did you we wait until the queue was empty and the producer was again in the State of pre-event?].

  There are a few 'holes' in this simple explanation, that which some, I think we filled.  For example, what happens when the triggers are too close together?  A way to handle this is to not allow a relaxation to be processed as long as the prior event queue is full.

  Bob Schor

• Try to install Indiana Jones and the infernal Machine, Windows (8 / ME) compatibility mode does not

  I try to install Indian Jones and the Doomsday Machine on my computer.
  I tried using the compatibility mode for windows 98 / ME, but it does not work. When I run the program splash arrives, but when I click on install it closes then nothing happens. There are no errors.
  I am running Windows 7 64 bit.
  Also I install the original CD, and it has worked before in older computers (running Win 98 of course).
  Any help would be appreciated.

  The game should run fine under Win7 64 bit. The problem is that the installer is only 16 bit and is no longer supported in Windows. Just use a different Setup program. Try www.markusegger.at. I'm running the Doomsday Machine, Alliance Xwing, Xwing v's Tiefighter, and Grim fandango all on 64 bit Win7 all using custom Setup programs.

  I also used the original X-wing, Tie-fighter and fate of Atlantis via Dosbox.

• I can't connect to MSN and Hotmail for a long time, about 2 weeks and I try to change my password but the support of coustomor give me a PIN code

  Hello world

  Hi everyone, please I need help I can not connect on MSN and Hotmail for a long time, about 2 weeks and I try to change my password but the support of coustomor give me a PIN code but I forgot it and when I try to answer to the security question, they said try later I am looking for your help I have a lot of private information and I want to get that back please help me :(
  How will I know if my account has been blocked? and how can I get it back?
  Hi -0,
  
  The question you have posted is better suited for Windows Live Forums, check out the link:

  http://windowslivehelp.com/product.aspx?ProductID=1

   

  Reference: How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

   

  I hope this helps.

• I get 656 error Code when I try to download my updates to the windows desktop.

  I get 656 error Code when I try to download my updates to the windows desktop.

  Do you mean * 646 *?

  See:

  http://support.Microsoft.com/kb/2258121

  Very popular.

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I try to recover my system using the xp pro installation disc get message that the version on the computer is newer tha the version on the cd

  I try to recover my system using the xp pro installation disc get message that the version on the computer is newer tha the version on the cd

  You have probably updated to SP-1 and SP - 2 maybe since then and the CD is without both.

  You try to restore the system from the cd, or re - install the OS from it?