Try to get the data of
Help, please:
I am trying to get the data from the internet in the Simulator. The browser wirks fine and I am able to navigate... but I'm nt get any :-(
Here is my code:
String url =
"http://www * & format = json;
C = HttpConnection
null;
InputStream is =
null;
int rc;
try {
c = (HttpConnection) Connector.open (url);
Get the response code is open the connection,
Send the request and read HTTP response headers.
The headers are stored until asked.
RC = c.getResponseCode ();
if (rc! = HttpConnection.HTTP_OK) {
throw new IOException ("HTTP response code:" + rc);
}
is = c.openInputStream ();
Get the ContentType
The string of type = c.getType ();
The length and process data
int len = (int) c.getLength ();
if (len > 0) {
int actual = 0;
int BytesRead = 0;
byte data = newbyte[len];
while ((bytesread! = len) & (real! = - 1)) {
real = is.read (data, bytesread, len - bytesread);
bytesRead += real;
}
}
else {
int ch;
while ((ch = is.read (())! = - 1). {
}
}
}
catch (E ClassCastException) {
throw new IllegalArgumentException ("not a HTTP URL");
}
finally {
if (is! = null)
is. Close();
if (c! = null)
c.Close ();
}
Are you runing the MDS Simulator? It must be upon the connection form the Simulator, unless you specifically request a direct connection by adding «;» deviceside = true' to your URL.
Tags: BlackBerry Developers
Similar Questions
-
Try to get the data in a field of classical entry in a clip
I'm working on a project basis CMS (for self learning purposes) and I'm stuck on something trying to get data from a text inside a frame of the movie entry. The code works with the homeUpdate_btn on the same level as the home_input_txt.
When I run the file (swf), the homeUpdate_btn does not show because it isn't at the level of the root parent level. (it's inside the clip with the home_input_txt).
So, if I put the homeUpdate_btn in the parent level (I hope I rethink my levels). The button is not able to get the data in the home_input_txt field which is at the root.
I would like to try this again... you can see the classic home_input_txt of parent level (outside the movie clip and make changes), but you can see the homeUpdate_btn of this level. So to see the homeUpdate_btn I set at the parent level. Now how I update and obtain data on the level of the root of the home_input_txt... .inside the clip?
__________________________________________________________________________________________ _____________________________
I think it's the line that update data comes... that is text entry: homeEdit_variables.home_body = home_input_txt.htmlText;
________________________________________________________________________
Issue: homeUpdate_btn does not show inside the clip when I run.
______________________________________________________________________
Any Action Script for "Udate Home Page. (again within a clip)
Stop();
restrict the characters that the user can type into the text entry field
home_input_txt. Restrict = "A-Za-z 0-9,.? $& = @_ « ;
put current home page data in the field of text for editing
home_input_txt.htmlText = homePageText;
Assign a variable name for our URLVariables object
var homeEdit_variables:URLVariables = new URLVariables();
Build the varSend variable
var homeEdit_varSend:URLRequest = new URLRequest ("cms_control_file.php");
homeEdit_varSend.method = URLRequestMethod.POST;
homeEdit_varSend.data = homeEdit_variables;
Build the varLoader variable
var homeEdit_varLoader:URLLoader = new URLLoader;
homeEdit_varLoader.dataFormat = pouvez;
homeEdit_varLoader.addEventListener (Event.COMPLETE, completeHandler_home_edit);
Completion of script handler PHP and return
function completeHandler_home_edit(event:Event):void {}
gotoAndStop ("home");
}
Add an event listener for the button send and what function to perform
homeUpdate_btn.addEventListener (MouseEvent.CLICK, updateHomePage);
Validation of form fields and send the variables when you click on the button
function updateHomePage(event:MouseEvent):void {}
Loan variables for sending
homeEdit_variables.sendRequest = "update_home_page";
homeEdit_variables.home_body = home_input_txt.htmlText;
Send the data to the php file
homeEdit_varLoader.load (homeEdit_varSend);
}
I get this error message:
Symbol "page content", layer 'actions', frame 25, line 44 1119: access to property may be undefined home_input_txt through a reference with static type flash.display:DisplayObjectContainer.
_______________________________________________________________
mc_edit is the name for the clip
So I thought I would say that there... the... in home_input_txt.htmlText the container movie clip.
I changed the line below in the action script where is the button.
______________________________________________________________________________
homeEdit_variables.home_body = mc_edit.home_input_txt.htmlText
__________________________________________________________________________
It worked :-)
Maybe it's not the right way, but it will solve the problem send me severe headaches... Laughing out loud
Thank you for all your quick responses. You kept me motivated
-
<; dateformat: create, get the date in en_GB, es_ES instance
Hello
I don't know if it's a bug or normal behavior:
I get the date in en_GB, but I ask the date to es_ES, the snippet of code below:
< ics:if condition =' < % = ics. GetList ("FechaBlog")! = null & & ics. GetList("FechaBlog").hasData () % > ' >
< ics:then >
< ics:listget listname =' < % = "FechaBlog" > "fieldname = 'value' output ="Cash out"/ >"
< local: create varname = "currLocale" nomlocale = "es_ES" / >
< dateformat: create name = datestyle 'PostDateFormat' = 'average' timezoneid = "Europe/Madrid" locale = "currLocale" / >
< name dateformat:getdate = "PostDateFormat" value = "< % = ics." GetVar ("cash") % > ' valuetype = "jdbcdate' varname ="FormattedPostDate"/ >
< / ics:then >
< / ics:if >
22-may-2015
I expect to get: 22 -mayo- 2015; But if change the 'average' datestyle to "long", I am getting:
2015 22 Mayo
as expected, in es_ES.
This is the normal behavior? WCS 11.1.1.8
Kind regards
Hello Jorgitoito,
This is how Java has shaped the date in Spanish. It is not specific to the WebCenter Sites.
You can give it a try with this simple Java code:
java.util.Locale locale = new java.util.Locale("es", "ES"); java.text.DateFormat mediumFormat = java.text.DateFormat.getDateInstance(java.text.DateFormat.MEDIUM, locale); System.out.println(mediumFormat.format(new java.util.Date())); java.text.DateFormat longFormat = java.text.DateFormat.getDateInstance(java.text.DateFormat.LONG, locale); System.out.println(longFormat.format(new java.util.Date()));
The results I got:
27-May-2015
2015 27 Mayo
I suspect that 27-May-2015 here is not in English; It is simply the first three letters of mayo.
Kind regards
Stephan.
-
Compare and get the data in the tables (see post for details)
I have two tables TableA and TableB. I struggle to write a query to get the dates of TableB (instead of TableA dates) where TableA dates don't coincide with the tableB (beginning and end).
Example 1: For account A1234,.
TableA got 2 rows 1/31/2014-3/3/2014 (which corresponds to TableB row), but TableA got another rank 31/01/2014 - 31/01/2014 that corresponds with the date of TableB Begin. In this case, I'm looking for output as below,
Use TableB start and end date and combine number two rows from TableA for this account
ACCOUNT TableB_BEGIN TableB_END AMOUNT A1234 31/01/2014 03/03/2014 100.0000000000 Example 2: For the B7777 account.
TableA end date aligns with the end dates of TableB for this account, in this case I want out put as,.
Use TableB start and end date and get the amount of TableA
ACCOUNT TableB_BEGIN TableB_END AMOUNT B7777 05/04/2013 06/05/2013 200.0000000000 Example 3: On behalf of D5555,.
Even a TableA line corresponds with TableA, there are two other rows in TableA matching start date with TableA and correspondence with the end date with TableA, in this case, that I put as,.
Use TableB start and end date and combine number three rows from TableA for this account.
ACCOUNT TableB_BEGIN TableB_END AMOUNT D5555 08/08/2014 10/09/2014 1100.0000000000 Example 4: To account E6666.
Table corresponds to a row with TableB and no additional lines in TableA, just display the data in A table
Tables and data:
create table TableA ( Account varchar2(10) not null, Begin date not null, End date not null, Amount number(19,10) not null ) ; create table TableB ( Account varchar2(10) not null, Begin date not null, End date not null, Amount number(19,10) not null ) ; TableA Data: insert into tablea (ACCOUNT, BEGIN, END, AMOUNT) values ('A1234', to_date('31-01-2014', 'dd-mm-yyyy'), to_date('31-01-2014', 'dd-mm-yyyy'), 0.0000000000); insert into tablea (ACCOUNT, BEGIN, END, AMOUNT) values ('A1234', to_date('31-01-2014', 'dd-mm-yyyy'), to_date('03-03-2014', 'dd-mm-yyyy'), 100.0000000000); insert into tablea (ACCOUNT, BEGIN, END, AMOUNT) values ('B7777', to_date('18-04-2013', 'dd-mm-yyyy'), to_date('06-05-2013', 'dd-mm-yyyy'), 120.0000000000); insert into tablea (ACCOUNT, BEGIN, END, AMOUNT) values ('C6666', to_date('25-06-2014', 'dd-mm-yyyy'), to_date('08-07-2014', 'dd-mm-yyyy'), 10.0000000000); insert into tablea (ACCOUNT, BEGIN, END, AMOUNT) values ('D5555', to_date('08-08-2014', 'dd-mm-yyyy'), to_date('16-08-2014', 'dd-mm-yyyy'), 1000.0000000000); insert into tablea (ACCOUNT, BEGIN, END, AMOUNT) values ('D5555', to_date('08-08-2014', 'dd-mm-yyyy'), to_date('10-09-2014', 'dd-mm-yyyy'), 0.0000000000); insert into tablea (ACCOUNT, BEGIN, END, AMOUNT) values ('D5555', to_date('16-08-2014', 'dd-mm-yyyy'), to_date('10-09-2014', 'dd-mm-yyyy'), 100.0000000000); insert into tablea (ACCOUNT, BEGIN, END, AMOUNT) values ('E6666', to_date('01-01-2014', 'dd-mm-yyyy'), to_date('01-02-2014', 'dd-mm-yyyy'), 100.0000000000); TableB Data: insert into tableb (ACCOUNT, BEGIN, END, AMOUNT) values ('A1234', to_date('31-01-2014', 'dd-mm-yyyy'), to_date('03-03-2014', 'dd-mm-yyyy'), 100.0000000000); insert into tableb (ACCOUNT, BEGIN, END, AMOUNT) values ('B7777', to_date('05-04-2013', 'dd-mm-yyyy'), to_date('06-05-2013', 'dd-mm-yyyy'), 200.0000000000); insert into tableb (ACCOUNT, BEGIN, END, AMOUNT) values ('C6666', to_date('06-06-2014', 'dd-mm-yyyy'), to_date('08-07-2014', 'dd-mm-yyyy'), 10.0000000000); insert into tableb (ACCOUNT, BEGIN, END, AMOUNT) values ('D5555', to_date('08-08-2014', 'dd-mm-yyyy'), to_date('10-09-2014', 'dd-mm-yyyy'), 1100.0000000000); insert into tableb (ACCOUNT, BEGIN, END, AMOUNT) values ('E6666', to_date('01-01-2014', 'dd-mm-yyyy'), to_date('01-02-2014', 'dd-mm-yyyy'), 100.0000000000); SELECT A.ACCOUNT, A.BEGIN, A.END, A.AMOUNT, B.ACCOUNT, B.BEGIN, B.END, B.AMOUNT FROM TABLEA A LEFT JOIN TABLEB B ON A.ACCOUNT = B.ACCOUNT
Hello
SeshuGiri wrote:
Hi Frank,.
Your query/solution works very well, but I forgot to mention something in the first post...
Please insert these additional lines and try the request again.
TableA Additional lines:
- Insert into TABLEA (ACCOUNT, BEGIN, END, QUANTITY)
- values ('F9999', to_date (January 2, 2014 ',' dd-mm-yyyy ""), to_date (3 January 2014 ', 'dd-mm-yyyy'), 999.0000000000);
- Insert into TABLEA (ACCOUNT, BEGIN, END, QUANTITY)
- values ('A1234', to_date (March 3, 2014 ',' dd-mm-yyyy ""), to_date (4 March 2014 ', 'dd-mm-yyyy'), 999.0000000000);
TableB Additional lines:
- Insert into TABLEb (ACCOUNT, BEGIN, END, QUANTITY)
- values ('A1234', to_date (March 3, 2014 ',' dd-mm-yyyy ""), to_date (4 March 2014 ', 'dd-mm-yyyy'), 999.0000000000);
Question 1:
The table has a rows for A1234 account (i.e. the time period different than the ranks for the same account)
one is A1234 31/01/2014-03/03/2014, A1234 03/03/2014-03/04/2014
Your query that returns two rows for A1234 account (which is what I want), but the amount is messed up.
ACCOUNT BEGIN END TOTAL_AMOUNT 1 A1234 31/01/2014 03/03/2014 1100 2 A1234 03/03/2014 03/04/2014 1100 Except:
ACCOUNT BEGIN END TOTAL_AMOUNT 1 A1234 31/01/2014 03/03/2014 101 2 A1234 03/03/2014 03/04/2014 999 Question 2:
In some cases TableA will have an account (F9999), but the TableB don't. I can just this line by making the Left Join right join?
I don't get the results with additional data. I get 1099 for two lines where account = 'A1234 '. I get 1100 as the amount on the line with the account = "D5555. You did it other changes to data?
Except:
ACCOUNT BEGIN END TOTAL_AMOUNT 1 A1234 31/01/2014 03/03/2014 101 2 A1234 03/03/2014 03/04/2014 999 Still, I don't see why you want to 101 for the amount of the first row. Why not 100?
How can you know which rows from tablea should get attached to what rows from tableb, when the account is not unique?
Maybe you want something like this:
SELECT a.account
b.begin
b.end
SUM (a.amount) AS total_amount
FROM tablea a
ON a.account = b.account JOIN tableb B
AND a.begin BETWEEN b.begin
AND b.end
AND a.end BETWEEN b.begin
AND b.end
GROUP OF a.account, b.begin, b.end
ORDER BY a.account
;
but I guess just to your needs, and guessing is not a very good or reliable way to solve problems.
Question 2:
In some cases TableA will have an account (F9999), but the TableB don't. I can just this line by making the Left Join right join?
Yes, it looks that you want an outer join. What happened when you tried? As always, post your code, the exact results you want from the given sample data, as well as an explanation of how you get these results from these data.
-
Get the data in table of javafx
Bat I can get the data in table as:
[code]
for (int i = 0; i < dtm.getRowCount (); i ++)
{
for (int j = 0; j < dtm.getColumnCount (); j ++)
dtm.getValueAt (i, j);
[/ code]
But how can I do this with javafx table? I google and google and google and no luck.
In JavaFX make data are stored on a basis per line. Each line contains an element of type T (where you have a TableView
), and each column specifies a value using a callback function that determines the value of the column of the value of a particular line. You can browse the data simply by practice
for (T item : table.getItems()) { // ... }
And then get the value of each column for each element of the given line, since you "know" what each column represents.
For example, in the example of JavaFX documentation, you could do:
for (Person person : table.getItems()) { String firstName = person.getFirstName(); // value in firstName column String lastName = person.getLastName(); // value in lastName column String email = person.getEmail(); // value in email column }
If you want something really generic, you can try
for (T item : table.getItems()) { for (TableColumn
col : table.getColumns()) { Callback , ObservableValue>> cellValueFactory = col.getCellValueFactory(); CellDataFeatures cdf = new CellDataFeatures (table, col, item); Object cellValue = cellValueFactory.call(cdf).get(); // do something with cellValue... } } If you have little chance to this need, unless you write some kind of framework. (I just typed it here, you may have get dirty you with guys a little to make things).
-
Rewrite the query, select below or try to get the necessary O/P
Hello..
My example of data.,.
Create table customer (name varchar2 (10), telephone1 telephone2 number (10), number of phone3 (10), (10) number, bitwisephone number (10));
Insert into customer values('a',23456,67890,null,12345);
Insert into customer values ('b', 67459,89760,null, 37689);
create table do_not_call (dont_call number (10));
insert into do_not_call values (67890);
insert into do_not_call values (37689);
Question: -.
--------------
Customer 'a' has value of numbers1 as 23456.check if telephone1 exists in the do_not_call table.
In fact there is no, so set the bit for numbers1 as "o" like wise search telephone2
& phone3.after update of the bitwisephone for each client should be as the output below.
Need to O/P: -.
-------------------
name bitwisephone
a 010
b 001
For that matter... I use "any" operator...
SELECT name, case when numbers1 = all (SELECT dont_call FROM do_not_call) and then put an end to '1' other '0'.
-case when telephone2 = all (SELECT dont_call FROM do_not_call) and then put an end to '1' other '0'.
-case when phone3 = all (SELECT dont_call FROM do_not_call) then '1' other '0' end 'Bits '.
OF THE customer;
Is there any other way to get the necessary O/P?
Thank you!!
Kind regards
VijayRajaram.Looks like one already answered Re: rewrite the query, select below or try to get the necessary O/P
with customer(name,phone1,phone2,phone3,bitwisephone) as (select 'a',23456,67890,12345,null from dual union all select 'b',67459,89760,37689,null from dual ), do_not_call(dont_call) as (select 67890 from dual union all select 23456 from dual union all select 37689 from dual ) select name, to_char(mod(trunc(sum(weight)/4),2))|| to_char(mod(trunc(sum(weight)/2),2))|| to_char(mod(sum(weight),2)) bitwisephone from (select name,phone1 phone,4 weight from customer union all select name,phone2,2 from customer union all select name,phone3,1 from customer ) c, do_not_call d where c.phone = d.dont_call(+) and d.dont_call is not null group by name
Please do not duplicate messages
Concerning
Etbin
-
Get the Date format that the user sets in "Preferences".
Hello
Is it possible that I can get the date format (for example: "DD-MMM-YYYY', 'DD-MM-YYYY' etc.) where the user desires under 'Préférences' in a page of the OPS?
Concerning
Hawker
Published by: HawkerHunter on Aug 6, 2011 11:02ICX_DATE_FORMAT_MASK - is the value of profile that contains the value that is selected in the preferences page.
You can try pageContext.getProfile ("ICX_DATE_FORMAT_MASK");
in your code.Kind regards
Krishnan guru. -
Try to get the code, but it says device saved
Try to get the code in order to register and get additional codes to pay for services and it says that my drive is already registered. How to fix this? I have not had this code yet. Œuvres of Netflix, but it shows an instant queue of course someone else or gratis. I do not know. Someone help here?
This a good site thank you never one for all the beautiful work fixed that I'm just getting started
-
How can I get the data view to display the same amount of time I save?
I use the Sound and Vibration Measurement Suite. In the data view, I display a graph of time, the power spectrum, the Color Map and the waterfall. I am also showing strength in numbers group for several bands and doing cutting-edge research. I record 100 ms of the transient wave. In the data view, why the temporal plots show several seconds of data? What determines how much time will appear in the data view? More important, the power spectrum reflects the power for the entire of several seconds of data displayed? Same question for power in the values of band and cutting-edge research. I want to just this data displayed for 100 ms of the wave that I record. So, how can I get the data displayed (waveforms) and power numbers come only 100 ms of the recorded wave?
Finally, what is the best way to make account concisely the recorded data? By slide numbers on the Documentation tab is not concise, because it comes with graphics, etc.. I tried save as ASCII/LVM, but I get a bunch of stuff intermiated I don't care. Help?
Hi TimRsandiego,
SignalExpress is programmed to display graphs with default scales based on the type of action, it's reading. These scales and settings can be changed by right-clicking on the graph, and then select Properties.
If you are interested to learn more about how to use SignalExpress, I would recommend checking out some demonstrations/tutorials on NI.com. You can find some of these demos at the following location:
Let me know if you have any other questions.
Kind regards
-
Can someone show me how to get the data of this vi in four columns in a spreadsheet file.
I'm trying to get the data into four columns on a worksheet. The data consists of two channels and two measures, a maximum voltage and a voltage after x seconds. I enclose the code. Any help would be great. Thank you.
-
I get the message "Could not authenticate you" when I try to get the portfolio management
Original title: portfolio in MSN Money management.
I get the message "Could not authenticate you" when I try to get the portfolio management and when I try again, the same message is repeated. What type of authentication is necessary?
Hello
I recommend you contact the support team of MSN Money for assistance on this issue.
http://social.Microsoft.com/forums/en-HK/money/threads
See also Solution Center-silver
-
Hi all
I'm using Labview 8.5.
I'm trying to get the date system.
I use the Format Date/time string in a "%Y %m %d' format.
The PROBLEM is the Format Date/time string return "YYYYMMDD" only.
Please see my attachment to see.
Please help me with this, whenever I encounter this problem it force to reinstall labview program.
Best thanks!
-
When I try I get the windows update error number: 0x8024400A
When I try I get the windows update error number: 0x8024400A
Hello
This problem is limited to a particular update or all updates? Thanks for mentioning the number of KB.
Follow the suggestions below for a possible solution:Method 1I suggest you consult the site mentioned below:
Temporary connection related errors may occur when you use Windows Update or Microsoft Update
http://support.microsoft.com/kb/836941.Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Method 2
If the problem is not solve I suggest you try the procedure described in the link mentioned below.You cannot install some programs or updates
http://support.Microsoft.com/kb/822798WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/See the link below and follow the steps suggested to DG_963 on July 1, 2012.
http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-Update-error-0x8024400a-on-clean-install/4c79d20d-A4B3-4724-A6D8-4a768559038aLet us know the status of the issue. -
I have Dell XPS M1330 with windows vista home premium. When I try to get the support of e-mail on the microsoft support site, he asked 20-digit PID number, when I entered that number, it says this PID is not saved in the chosen country, I m from India, I chose India-English. I also tried in the United States, United Kingdom, but whenever he says the same thing. I can't support for the supplied windows pre-loaded with my laptop. I ve the product key and PID number. Pls guide me to do this, my windows is enabled.
original title: Support of Windows problemReference Dell are responsible for their OEM of Windows versions. Microsoft supports the commercial versions of Windows. I'm not familiar with the details of the software support arrangements, but it is the basis that applies.
What is the problem?
-
I have a HP computer and I try to get the best performance on it
Dear community,
I have a HP computer and I try to get the best performance on it, but it does not work. I try to update the drivers and use the memory of storge on USB keys and other stuff like using Microsoft Security Essenticals it is sort of: wered because there is no no way around my problem that way happens to you guys, please I want to just play and have the best performance that I can handle it.
I think I'll put my memory to 8 GB of Ram or 16 GB of Ram.
Thanks for your help.
Original title: Windows 7 HP 2000-369WM
Hello
Before upgrade you your RAM, check at HP for the specifications of your computer to see what max amount and type of RAM your motherboard will / can use, or download and run the Crucial Scanner:
http://www.crucial.com/USA/en/systemscanner
Also, if you use Windows 7 32 bit, 4GBs is the maximum RAM that can be installed, with the exception of Starter which is 2GBs.
If you are using Windows 7 64 bit, what are the limits of RAM max for each edition (there is no Starter 64 bit)
Home Basic 8GB Home Premium 16GB Professional 192GO Enterprise 192GO Ultimate 192GO _________________________________
And follow these steps to keep your device works properly:
Search for malicious software with the FREE version of this program.
This is the right link to download included.
And does not accept the option "Pay for the version" trial installation
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
You can clean your hard drive using these two methods.
"Delete files using Disk Cleanup"
Using the free CCleaner program:
http://www.Piriform.com/CCleaner
In NO case use the registry cleaning Option in CCleaner
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And it is not recommended to use a register or a program of cleaning/TuneUP/utilities they can do more harm to your any good operating system that they claim to be able to do.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Make sure you have the latest updated drivers:
Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
What are the other steps, which does not include some of the above:
"Optimize Windows for better performance.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.
"How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:
- Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
- Type the following command and press ENTER:sfc/scannow
The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
See you soon.
Maybe you are looking for
-
Rebuild Qosmio G50 - I want my RAID back
When I got my machine I attacked out there. Now, I want to again attacks and controller software intel matrix advanced options do not include the menu create raid items that the manual says will be there. OK, I thought I'll just do the thing for HARD
-
Need help with the FORMULA by the numbers
I need a table to calculate my order of shirt by color and size. What I am doing wrong? Thank you
-
Do not disturb turn them off by itself?
Lately, do not disturb automatically returns online whenever I get a message, defeat the purpose of DND. Why does this happen? Is there a solution to stay on DND? Version of Skype: 7.2.0.103 Windows 8.1
-
XP can't activate HP flash drive v125w
Hello. I am running XP and I recently bought a HP v125w 16 GB flash drive. In order to move larger files on him, I reformatted to NTFS it. However, when my work was finished, and I tried to format it in FAT32, things froze on me and I was forced to r
-
audio or video stops and emits one every 30 seconds
When I launch the video or audio every 30 seconds there is a slight hesitation and the buzz while playing. Does anyone in the community know this phenomenon? If so, how to solve it. It's on my laptop Dell Inspiron 1545.