try to install cf10 on Windows 7, error cannot configure the IIS connector

Similar Questions

• Error when you try to burn a CD: Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???

  I just burn a CD with no problem at all.  Using the same type of CD, brand new, I tried to burn another CD and got this error message:

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.

  I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message.  No idea why my CD-writer has decided to stop working for me?

  Hi Cierrajade,

  1. you have any third-party DVD burning software installed on the computer?

  Method 1

  You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.

  For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  Method 2

  If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Method 3

  If the previous step fails, check if you can burn CDs using Windows Explorer

  Burn a CD or DVD in Windows Explorer

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error when you try to play audio files: Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer where the file is stored

  Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect.

  I hope someone can help on Win 7 64 bit, music is taken on a disk usb2 external hard... I had no problem until today when the message in the title appeared next to each track, with a little red cross.

  I already deleted database library as suggested by some of the forums, also disabled the media as a feature of Win 7, rebooted and then re-enabled it.  I also disconnected externally and restarted that as well, I'm also the same mistake with a cd in the cd drive as well.

  Can anyone help?

  Hello

  This error may occur for one of the following reasons:
  The file is currently in use. Close the file and then try again.

  You are not allowed to access the location where the file is stored.

  Follow these steps to grant all permissions in the folder where the files are stored:
  1. right click on the folder on the external drive and click Properties.
  2. in the Properties window, click on Security tab.
  3. now, click Edit , and then click Add.
  4. now, type everyone in the box and click OK.
  5. check the full control box.
  6. click on apply and then click OK.

  You can also try the mentioned below as follows:

  1. click on start.
  2. go in Control Panel.
  3. Select "SOUND".
  4. double-click on speakers.
  5. click on the tab advanced and then uncheck the enable audio enhancements.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error when you try to play a DVD: Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  copy a group of photos w/music (Smilebox program) on dvd;

  After following the instructions of SMilebox to burn "images set to music" on DVD, to the attempt of DVD playback, I got following error message: Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.  We live in the Washington area. I didn't know that DC was considered an unusual geographic region?

  Hey nongeekbetty,

  The DVD is encoded for a different region. Most DVD readers only works with DVDs that are coded for the computer was purchased in the same region. So if you buy a DVD in one country and then try to play on one computer from another country this DVD could not play.

  Step 1:

  Make sure that the DVD region is set to the appropriate region:

  a. Click Start.

  (b) in the search box, type Device Manager.

  c. right-click on the DVD drive.

  d. right-click on it and select Properties.

  e. make sure that the region will be resolved.

  For your information:

  http://Windows.Microsoft.com/en-us/Windows7/playing-DVDs-in-Windows-Media-Center-frequently-asked-questions

  Step 2:

  Also temporarily disable User Account Control (UAC) and check it out.

  http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off

  Note: Activate it once you are done with the check.

  Kind regards

  Savan - Microsoft technical support.

• Whenever I try to install these two windows automatic updates, I get the 8024200d error code

  I try to install the KB943411 and KB933928 updated, but I get the 8024200d error code. I'm running on Vista Ultimate (without SP1), and I do it through Windows Update.

  Hi BobTheDude,

  I suggest you to follow these steps and check if it does the work for you:

  ·         Follow the resolution 2 in the article
  http://support.Microsoft.com/kb/947366

  ·         Download and install the latest Windows Vista application compatibility update in the link mentioned below:
  http://support.Microsoft.com/kb/963699

  ·         Rename the Catroot2 folder

  To rename the Catroot2 folder, follow these steps:

  1.	Click Start type cmd and then click OK . Right click on cmd and then click run as administrator .
  2.	At the command prompt, type the following commands and press ENTER after each line: net stop cryptsvc Ren %systemroot%\System32\Catroot2 oldcatroot2 net start cryptsvc output

  ·         Empty the software distribution folder

  1.	Click Start type services.msc , and then click OK . Click right services.msc and then click run as administrator .
  2.	In the Services (Local) pane, click automatic updates , and then click stop .
  3.	Reduce the Services (local) window.
  4.	Select all the contents of the Windows distribution folder, and then delete them. Note By default, the Windows distribution folder is located in the drive : \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
  5.	Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
  6.	In the Services (Local) pane, click automatic updates , and then click Start .

  ·         Disable security software

  ·         You can download and install the stand-alone package includes updates that failed
  KB943411 - http://www.microsoft.com/downloads/details.aspx?familyid=A7BB4622-FB21-4769-B29A-7FC7A07D182A&displaylang=en

  KB933928 - http://www.microsoft.com/downloads/details.aspx?FamilyId=DC2AD07B-D5D7-407A-9A0E-3F3D142682D0&displaylang=en

  Please let us know if it helps.

  Thank you and best regards,
  David

• When you try to install anything I get an error: 'could access the Windows Installer service '.

  Original title:

  Windows Installer.

  When I try to install anything I get the following message: "service Windows Installer could not be accessed.   Windows can run in safe mode or Windows install not installed correctly.  I'm not running in safe mode.  This problem started in the last day or two and there have not been any changes to my computer.  I'm under Winsows XP Professional, 32-bit, service pack 3.  Could you help me solve this problem?  Thank you.

  Hello
   
  You can try the steps from the following link and check if it works:
  ""The Windows Installer Service could not be accessed "error message when you install a program in Windows XP "
  http://support.Microsoft.com/kb/315353
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows
   
  Let us know if it helps!

• try to install update for windows xp (kb2633952) but get the 0x8007F0F4 error code. Firewall is disabled.

  Cannot install update kb2633952, 0x8007F0F4 error code.  the firewall is disabled.  can you help me get this installed?

  dupe of http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/trying-to-install-microsoft-update-kb2633952-but/3774483a-088d-40f7-891a-ced97c4d9deb

• Try to install CF10

  I try to install CF10 on a virtual server.

  The server is a Windows 8 R2 Service Pack 1 installed.  Double-2, 53 GHz with 6144 MB RAM.  The server has installed IIS7.

  I got most of the way through and got this error.

  There is a site that is installed on the server.

  I'm now a programmer, server administrator or a web developer.  I'm just a guy in our Department is not afraid to try to tackle a site.

  Could you please let me know (in other words), I have to do to get CF installed?

  Thank you!

  

  Hi ctreeves,

  Please ensure that all of these IIS features are enabled:

  • ASP.NET
  • CGI
  • ISAPI extensions
  • ISAPI filters

  Options above can be installed by following the steps mentioned in the title of the Installation of IIS on Windows 7 features to http://msdn.microsoft.com/en-us/library/hh167503(v=nav.70).aspx

  Kind regards

  Anit Kumar

• Satellite C55-A-1JL - 10 Windows sound driver - cannot create the instance of the APO

  Hello.

  I have Toshiba Satellite C55 - A (PSCGAE).

  Yesterday, I've updated my Windows 8.1 to Windows 10 and install the drivers.

  Version 1.2.41.0 of his Studio of DTS (32/64 bit).

  When I try to open this application I have error: cannot create the instance APO.

  What should I do?

  You need to update the audio driver (I guess that your device uses IDT HD audio card)
  But double check in Device Manager, then expand the section audio controllers, video and game to find out what kind of sound card you have.

  DTS Studio seems to be already aware...

  So I advise you to go to the Device Manager and uninstall its drivers Associates
  After reboot new, Windows 10 must check updates automatically... in case that it does not happen, you can try to manually start the update of the Device Manager.

• error code 8000FFFF when you try to install updates from windows update.

  error code 8000FFFF when you try to install updates from windows update.

  Lonnie,

  8000FFFF error code when you click on "check for updates" in the item of control panel of windows on a windows update computer vista http://support.microsoft.com/kb/946414

• Error 0 x 80280008 occurs when you try to install updates from Windows Live 2011 on my computer.

  0 80280008 error occurs when you try to install updates from Windows Live 2011 on my computer. He tells me that I already have the flavor of different construction of Windows Live. He tells me that if I want to install this version, I need to uninstall the version currently installed on my computer. I don't want this new version, or is my current version very well? How to uninstall version current/how know what my current version?

  You can find support for the installation/uninstall/upgrade Windows Live Essentials in this forum: http://answers.microsoft.com/en-us/windowslive/forum/wlinstall

  Tip: Windows Live Essentials, not Windows Update, not prompt you to upgrade (update) to Windows Live Essentials 2011 QFE3 (v15.4.3555.0308).

  The upgrade is mandatory since mid 2012. See http://answers.microsoft.com/en-us/windowslive/forum/messenger-wlinstall/mandatory-update-to-windows-live-essentials-is-now/0816b1b7-71ff-44f7-8d74-52505bbbf290?page=32#LastReply

• After installing CF10, I get this error msg, "cannot display this page".

  After installing CF10, I get this error msg when I try to access the page administrator, "cannot display this page".

  I am on Window Server 2003, 64-bit with IIS 6.0.

  Before I installed CF10, I uninstalled CF8.

  Thank you Charlie for your entry. Len and we have understood, whether an authorization to issue mainly. After you have configured the permissions, we found later that IIS is configured in 32-bit mode (as suspicious as well by you) and CF is running in 64-bit mode.

  @Len: Please refer to http://www.microsoft.com/technet/prodtechnol/WindowsServer2003/Library/IIS/405f5bb5-87a3-4 3d 2-8138 - 54b75db73aa1.mspx? mfr = true

  Kind regards

  Anit Kumar

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• Error message "Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer"

  Original title: Windows Media Player

  All of a sudden, I get the following error message when I try to use Windows Media Player 11: "Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer."  Never had this problem, or a message in the past.

  Hi RRobb,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: If you have a DVD decoder (for example Power DVD) try reinstalling it.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  If this is not the case, see the following link:

  Plug-ins for Windows Media Player

  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  Method 2: Perform a system restore if the problem occurred recently.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• When you try to install Turbo tax, I get error 1601.

  When you try to install Turbo tax, I get error 1601 (which are 641, 80070641).  I am running Vista.

  original title: problem installing Windows

  Hello

  1. is the question confined to Turbo tax?
  2 have you made any changes to the computer before the show?

  Method 1: Run the fix - it of the article mentioned below:

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: Error 1601: "Windows Installer is not available" when you install or update:

  http://TurboTax.Intuit.com/support/IQ/installation/error-1601---Windows-Installer-is-not-accessible-/SLN12236.html