Try to install sp2 to vista and...

Similar Questions

• Try to install SP2 for Vista: error 8024200B.

  Code 8024200B

  Try to install sp2 more than once now.  I get the error 'Code 8024200 B '.  I can't find a solution for this anywhere.

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• After installing SP2 for Vista, everything that I try to print from this computer prints in poster format.

  After installing SP2 for Vista, everything that I try to print from this computer prints in format post little matter what I tell the printer to do.  I use a laptop Acer Aspire 9410, 32-bit, Windows Vista, IE 8.  Commands from another computer on the printer work properly.  Should I uninstall SP 2 & reinstall?  Or what is the best fix for the problem?  Thank you.

  shagen18,
  You need to uninstall the printer and make sure you have the latest drivers from the manufacturer of the printer and then reinstall the pritner.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  I tried all the recommended solutions that Windows can throw at me, and yet I still can't download these updates for some reason any. Whenever I run the program "Microsoft Fixit" he says it's a mistake and fixing it with success, but I still get the same error when you try to install the updates. I have checked for malware, scanning my computer everything and see nothing.

  Hello

  1. what troubleshooting steps are carried out to solve the problem?

  2 were there any hardware or software changes made on the computer before this problem?

  Method 1:

  I suggest you to return the item and check if it helps:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Check out the link and check if it works:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 3:

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

   

  Reference:

  You can download updates manually from the link below:

  http://www.Microsoft.com/downloads/en/default.aspx

  It will be useful.

• Computer Toshiba laptop does not start after trying to install SP2 for vista 32 bit

  Tried to install SP2 for vista updates, it stagnates at 12%, message saying a problem has been detected and windows has been closed to protect the computer. At the bottom of the error message screen, it reads, technical info-stop OXOOOOC1F5. Windows doesn't start at all now, has tried running safe mode, pilots seem to load, then it returns to the screen error message with the same problem said. Nothing seems to work, tried same recovery disk came with the computer, it says it is loading files, then it returns also to error message screen. Computer came with vista pre-installed, so I don't have this drive to try. Someone at - it solutions? Very frustrating, how do I search problem when the computer will not start at all? Help!

  Follow the info below to try a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  If yours falls into the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.
  You can do a system restart tool, system, etc it restore.
  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  Mick Murphy - Microsoft partner

• Cannot install SP2 on Vista Home Premium SP1 32-bit laptop - fails with error 0x800b0100

  Cannot install SP2 on Vista Home Premium SP1 32-bit laptop - fails with error 0x800b0100

  Cannot install SP2 (KB948456 - X 86) on a laptop Vista Home Premium 32 bit SP1 with all updates of Windows installed.  Quickly fails after it starts with error 0x800b0100 in the system log.  It's a fully verified SP2 full download.  I did a full chkdsk /r who fixed some issues.  Removed AVAST.  A running Fix It tool that fixes the problem with crypt services.  Scanned for malware with MRT.  Scanned for malware with MalWareBytes.  Scanned for rootkit with the McAfee tool.  Run the sfc/scannow, that signals mistakes.  The CBS. Partial contents of the LOG file (see KB972036):

  2014-03-18 11:59:36, CBS NonStart info: success, start, treatment not required, as expected.
  2014-03-18 11:59:36, info CSI CSI 3222024 (0x00312a08) store initialized 00000005
  2014-03-18 11:59:36, CBS Session info: initialized 30360259:262197728.
  2014-03-18 11:59:37, info CBS SPI: Parent KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000 to SP2 package with install state 7
  2014-03-18 11:59:37, CBS Session info: 30360259:262197728 finalized.  Reboot required: no
  2014-03-18 11:59:37, CBS Session info: initialized 30360259:266957728.
  2014-03-18 11:59:38, CBS brand store corruption flag because of package info: Package_for_KB972036 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.2.0. HR: 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSPICbsClient::EnumPackages:156) cannot open the package hr = 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSystem::EnumerateCbsPackages:313) could not complete CBS package list hr = 0x800b0100
  2014-03-18 11:59:38, CBS Session info: 30360259:266957728 finalized.  Reboot required: no
  2014-03-18 11:59:38, info CBS SPI: could not enumerate the packages CBS
  2014-03-18 11:59:38, error CBS SPI: (GetLatestVersionFromCBSStore:135) ATL exception hr = 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSPCInstallTask::ApplicabilityScan:712) could not get the latest version of VistaSP2.

  KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18005 hr = 0x800b0100 store

  System will not install KB972036 - States does not apply.

  Referring to 956702 KB notes that the http://go.microsoft.com/fwlink/?LinkId=167357 link that needs 32-bit is 64-bit.  In addition, it specifies SP2 - which obviously I do not have.  But I manually downloaded the apparently correct tool and ran it - get does not apply.

  Hi John,.

  Apologize for the delay in response. Please try the steps as described in the following article:

  Windows Update error 800b0100

  Back to us for assistance.

• Problems installing sp2 on Vista...

  I can't install SP2 for Vista. I installed SP1 and I tried to install sp2 via windows update in which the update actually installed, but after the reboot, I get a message saying that the update could not be configured correctly and changes reverted.

  I also tried to install it manually, but I get an error message saying "C:\Windows\system32\sqmapi.dll is not designed to run on Windows or it contains an error. Try to install the program with the help of the orignal installation media or contact your system administrator or support software provider."

  I also tried a system allows to browse the command line to check all of the corrupted files, but generally the process was not successful... ! Any help would be appreciated!

  Hi MichaelPlaster,

  Given that you are always faced with the question, I suggest doing an InPlace Upgrade\Repair installation using the full version of Windows Vista installation disc and try to install the stand-alone SP1 package.

  Note perform a repair installation will not damage files and applications that are currently installed on your computer. However, before you perform an Inplace upgrade, you can take a backup of important data. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  To perform an upgrade in-place, follow these steps.
  a. close all running applications.

  b. Insert the Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2 DVD into the DVD drive of the computer.

  c. in the settings window, click install now.

  Note If Windows does not automatically detect the DVD, follow these steps:

  d. Click Start and type Drive: \setup.exe in the box to start the search.

  Note the placeholder drive is the drive letter of the computer's DVD.

  e. list programs, click Setup.exe.

  f. in the settings window, click install now.

  g. click go online to get the latest updates for installation (recommended).

  h. type the CD key if you are prompted to do so.

  i. Select the operating system on the page "Windows Installer" you want to increase the power or Inplace.

  j. click Yes to accept the Microsoft software license agreement.

  k. on the type of installation do you want? screen, click upgrade.

  l. Once installation is complete, restart your computer.

  For more information, please see the link:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Once the upgrade has completed, you must activate your copy of Windows Vista.

  For more information about how to activate Windows Vista, see the following article:

  How to activate Windows Vista.

  Hope this information is useful.

• Re: Satellite A300-1 b 9 - cannot install updates for Vista and IE8

  Hello

  I have a Toshiba Satellite A300 1 9 b I bought 9 months ago. It has Vista Home Premium 32 bit SP1. I have serious problems with the updates:

  1 Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86 - I can't install this for the last two months. Whenever it appears that the installation has failed.

  2 security Update for Windows Vista (KB961501) can be installed as well

  3. my Internet Explorer 8 does not work for the past two weeks. I tried to download it and when I did, then, my computer does not restart. I had to use sans-echec Mode, uninstall IE8 to return to Normal Mode

  4. I also tried to download and install SP2 for Vista, but it failed.

  I am very worried. Please suggest me what I should do.

  Thanks for your help.
  Stéphane

  I think that the decision of the antivirus program is a personal opinion

  I put t like McAfee and Norton because they need a lot of system resources and do a slower computer.
  I prefer AntiVir and Kaspersky Security suite. The two programs have good scan engine and don t need a lot of system resources. They are easy to use to use it.
  AntiVir is free but it s just an antivirus. Kaspersky Security suite also contains a firewall, antispam filter and more.

  It s your choice what program you are using. ;)

• Win 7 thinks that I have a 32-bit system when I try to install the 64-bit and he thinks I have the 64 bit when I try to install the 32-bit version

  Win 7 thinks that I have a 32-bit system when I try to install the 64-bit and he thinks I have the 64 bit when I try to install the 32-bit version
  I know I am running vista 64-bit, it states that in the system properties

  I have a HP Pavilion A6700, when I went to upgrade to Vista 64 bit to win7 64-bit (win7) said I can't upgrade an OS to a 64 bit one, so I tried the other way and tried to install the 32-bit 32-bit version, and then I got the msg, you cannot pass an OS 64-bit for a
  32 bit one, I looked in the system properties and it is running vista 64-bit
  Other than a clean install what can I do to improve?
  and if I do a clean install which are the files I need backup so I don't lose my data?

  Make sure you have the latest Service Pack for Windows Vista installed. Which edition of Windows Vista 64-bit you're running and what edition of Windows 7 you are trying to upgrade to?

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  In addition, run the Windows 7 Upgrade Advisor, it will scan your system and provide a report telling you if your PC can run Windows 7, and if there is no compatibility problems with your hardware or programs.

  Windows 7 Upgrade Advisor:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=en

  Also make sure that your BIOS is up to date. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• Try to install the Epson printer and scan - error msg application not compatible escndv is not compatible - I downloaded the drivers to day-help!

  Try to install the Epson printer and scan - error msg application not compatible escndv is not compatible - I downloaded the drivers to day-help!

  [Moved from the community centre of Participation]

  Try to install the Epson printer and scan - error msg application not compatible escndv is not compatible - I downloaded the drivers to day-help!

  [Moved from the community centre of Participation]

  Hello

  What version of Windows are you using?

  What is the model of the printer?

  See related thread

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/escndv-is-incompatible/a1521e27-f6dc-4c9c-B990-b98c721c74a1

  Have you tried to install the drivers using the Compatibility Mode?

• I try to install the progrsm Fixit and it does not allow me to make the race he leaves on the download

  original title: installation FIXIT

  I try to install the progrsm Fixit and it does not allow me to make the race he leaves on the download?

  Hello

  1. What operating system do you work?
  2. What Fix - it you are trying to install?
  3. What version of internet explore do you use?

  Please refer to the below link mentioned before asking your question so that you can provide all the relevant information for us to help you:

  http://support.Microsoft.com/kb/555375

  You can try the following:

  Remove temporary internet files

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Also try to save the file on your computer, then run it.

• Try to install the patch KB943729 and get this error. __

  Try to install the patch KB943729 and get this error.

  The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.

  Any help with this error.

  I've always found the icon on my Start button that indicates that an update is ready to be loaded and I have to restart my computer

  Open Internet Explore (only) to http://support.microsoft.com/kb/971058 & re-run the difficulty in AGGRESSIVE mode. [1]

  Reboot once more & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• try to install sp1 of Vista he gets at the end of step 3, then returns to the original OS

  original title: Vista SP1
  Whenever I try to install sp1 of Vista it happens at the end of stagen 3 then returns to the original OS

  Software probably prevents writing to the registry.  Try to install in clean boot mode.

  http://support.Microsoft.com/kb/331796

• Try to install microsoft software titles and when run download or download registered site get the pop-up 'needs elevation' does that mean?

  "a need to rise"?

  Try to install microsoft software titles and when run download or download registered site get the pop-up 'needs elevation' does that mean?

  Hello

  Right-click on the setup.exe and run as administrator

• Try to install the items 13 and it requires a serial number. The instructions show the number should start with 1057, but there is no code on the discs, the box or envelopes, only the discs came from 1057. I can't activate the software without this c

  Try to install the items 13 and it requires a serial number. The instructions show the number should start with 1057, but there is no code on the discs, the box or envelopes, only the discs came from 1057. I can't activate the software without this code, and it's a Christmas gift for my wife. Help!

  Thanks a lot... the box inside was stuck and I didn't think it came out. Awesome!