Computer Toshiba laptop does not start after trying to install SP2 for vista 32 bit

Similar Questions

• HP 15-af131dx: computer HP laptop does not start after update AMD video drivers

  Hello, my laptop HP 15-af131dx would not start after I have updated to the latest video drivers from AMD. After update, my phone was really slow, so I decided to restart it. When I tried to start up, most of the time, she would get to the windows logo with the symbol of loading under it and crashed. Sometimes arise windows recovery, but using it would only make it appear an error message. After a few tries, I was able to boot into windows safe mode and restore my video drivers. This corrects the problem, but I would like to know why this is happening and if the update of my video drivers by importing.

  . Hi @HPlaptop5,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with video drivers. I'll be happy to help you.

  You can also find your drivers to support.hp.com.

  The latest HP driver released was Version 15.201.1101.0 Rev.A release: January 29, 2016.

  I do not update my driver unless I have a video problem.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Computer Toshiba laptop does not work after the lid slam... Help please!

  This problem with a Toshiba - windows vista laptop began after the cover was closed too hard. When he was conducting swiched, instead of going to the usual blue screen, the screen was grey and a message would come in saying ' it installed program cannot start. " Click ok to stop the computer", as I could not get into windows at all, I took the drastic step to insert the recovery disks that came with the laptop to launch new and see if it worked (a cell phone factory default is is better than nothing).

  In any case during the process, which took a very long time, I got messages such as not found HDD1 also say there not enough space to recover.  Then I got x:\windows\systems32 and nothing else it got stuck on that for centuries, because he just asked me to check the disk, but I couldn't because I couldn't get a windows session, I looked online and saw something similar to my prob and says type chkdsk c:/f I did after recovering past for much longer afterwards I had to stop at 80% , because there is no room in the end and now I don't even not the blue screen.

  As soon as the laptop is turned on, it says, could not start windows. A recent hardware or software change might be the cause to fix the prob insert your windows installation disc.  But it won't let me, I get just the same message and also it says File\Windows\system32\drivers\Wdf01000.sys and the State: Oc00000e9 and Info: Windows could not load a critical system driver is missing or damaged.

  Please help me if you can, my daughter really needs the laptop works again for homework, thanks a lot

  Thank you for taking the time to answer, I think that will be my next move, was hoping I wouldn't have to take to a repair shop, because you never know how it will end up costing, there may be more damage than all formatting, thanks once again :)

• Computer Toshiba laptop does not start

  Have had some problems malware. Thought I had deleted them, including Thinkpoint. Restarted. Got the original F2 and F12 screen then just empty. Will not go further.

  Can anyone help please.

  Hi jagman49,

  1. try to start the computer in safe mode and check if you are able to boot to the desktop.

  See the link below to start in safe mode: a description of the options to start in Windows XP Mode:http://support.microsoft.com/kb/315222

  2, if you are unable to boot into safe mode, then try the steps by Mike - support engineer Microsoft Support, moderator of the link below: http://social.answers.microsoft.com/Forums/en-US/xprepair/thread/901f9138-7a73-42f2-86ed-00c7fef3b77e

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My laptop does not start after cleaning

  Hello
  I knew an overheating problem on my laptop.
  I therefore decided to remove a processor heat sink and empty dust. It was released with processor...
  There was a huge load of dust, so I cleaned it, put new thermal paste...

  Now computer laptop does not start loading Windows.
  It checks only the CD, HARD disk, and that's it.
  Screen is blank, ON the indicator led is on.
  Two fans periodically start to turn (when they stop radiator heat - so the processor works)

  Where is the problem?

  Thank you

  Hi Dubas,
  You can access the BIOS when you try to start your laptop? This can give you a clue as to why the OS will not charge.

  Kind regards

• Laptop does not start after installing vista sp2

  My Dell XPS 1530 stopped working after installing vista sp2. He gave me instructions for installation, step 1 of 3 and it went all that they way up to step 3 of 3 and said its closure and never came back...
  Please let me know, how to start the laptop.

  Hello GoogleGuru,
  Thank you for visiting the Microsoft Answers forum.
  Because your computer does not start until the desktop computer, we were able to try the system restore to a point before you install SP2.
  Thus, with the computer is shut down. Press the power button, then press on and press F8 until you see the startup options, and then it will give you the ability to boot to the last known good configuration. (select it).

  If this does not work, you can try to boot from the Vista DVD and use the recovery console to perform a restore of the system to another point in time.

  Post back with the results.

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• On Toshiba M505-S4940 computer microphone laptop does not work after upgrade Windows 7...

  I bought this laptop in July and it came with a free upgrade to Windows 7. Until I upgraded my cell phone, my microphone worked fine, but since I installed Windows 7, the computer does not recognize the microphone as a device. I looked for answers on the Web from Toshiba site, but nothing has worked. What is the problem with my microphone?

  Hi jillibeans34,

  Thanks for posting. Here is a link to the drivers of Toshiba. Download the sound and drivers of Toshiba Speech system. If you're still having problems, please contact Toshiba to see if they can provide you with the correct drivers.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=SB&OS=&category=&MOID=2346345&RPN=PSMG2U&modelFilter=M505-S4940&selCategory=3&selFamily=1073768663

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Acer laptop does not start after the blue screen

  After I got a blue screen (flashed by too fast to see the error message) when I try to reboot my acer 5610Z laptop computer with vista home edition, usually nothing happens at all. sometimes windows is trying to run the Startup Repair tool, then crashes and only a cursor flashing at a black screen.  Tried to open the case and clean the Fan & Heatsink heat to air without effect.

  The blue screen came a few days after I started using a new USB mouse, but the fan seemed to get high a few days earlier.

  But I noticed it will make the road to startup repair only if the battery is in, and never if only the power cord is attached.  Also, if I let the computer sit for several days, it is more likely start (even though he never passed from the Startup Repair).

  1. try the system restore.

  2. try to do a startup repair disk.

  3 acer Recovery Options.

  4. contact Acer.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

  Acer eRecovery made

   

  1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

  ·        The unit is able to reload Windows from this mode faster then CD.

  ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

  ·        Users are able to change the password in this mode for eRecovery only.

  ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

  ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

  2. in Windows, there are 3 ways to access eRecovery functionality.

  ·        Press Alt and F10

  ·        Open Acer eManager and then double-click eRecovery.

  ·        When a system is new it should automatically open this application and invite you to do the recovery media.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Acer.com/worldwide/support/index.htm

  Support &

  See you soon.

  Mick Murphy - Microsoft partner

• Laptop does not start after spilled liquid

  I spilled liquid everywhere in my laptop yesterday. And now it does not work!
  The thing is, I could activate it yesterday after I poured the liquid, it seemed ok.

  So I just turned off and left to dry.
  But it is not today.

  What should I do?

  Hello

  This is a really bad story and I put t see any chance of getting the laptop works without any replacement hardware.

  I think we are ve got the worst case. This means you have a short circuit that could damage the whole motherboard. :(

  I think you should certainly contact the notebook computer technician for a control.

  But it sounds really bad, Buddy :(

  However, good luck

• Laptop does not start after HP Support Assistant ran some update

  ENVY of HP dv7-7387er

  Yesterday my HP Support Assistant showed a message that there are a few critical updates. I confirmed to download and install it. After it was something like the BIOS update. And now my computer will not boot (black screen, no sound, only power led is on). I have to postpone my trip to fix. Can help you with something?

  I tried http://support.hp.com/us-en/document/c01443371 , but it did not help.

  Has been useful for me this: remove the battery, wait 1 hour, insert the battery, turn on the laptop and everything works ok. The key was - remove the battery for a long time.

• Laptop does not start after upgrading CPU

  Hello

  I have a dv2528ea and I decided to upgrade the processor and the RAM. According to the manual of the T8300 is compatible, so I bought one on eBay (so-called new). When I powered the laptop, the bios screen appeared as usual, but nothing more happens. Among the options available in this screen only works the "ESC" (boot messages I think). I can't access the configuration. The CPU, RAM, HARD drive and DVD drive is correctly detected, the BIOS and video BIOS are "shaded" don't know what it means.

  I know that I didn't break something because after putting the T7100 back in place, the computer worked fine.

  So my question is: is the burned T8300? Do I have a bios problem?

  I've never updated my bios (since 2007) and the CPU is not physically damaged, but this last part can doesn't mean anything...

  Thanks in advance, Pedro.

  Hi, Pedro.

  I hope it will do the trick.  F.0Une is old and I think that's the reason why your processor does not work.

  The problem is that you are under Windows 7.

  You can put Vista on it and flash, or do you know how to make a flash out of the file based BACK?

  I don't know how.

  I'm saying that you are taking a considerable risk if you flash in Windows 7.

  Paul

• Laptop does not start after Windows update

  I have HP laptop with Windows 8.1.

  It no longer starts after you install updates.

  It has happened before several times. I used system restore and it should correct the problem temporarily until the next time for the installation of updates.

  Now I can not even run system restore. He says that I have an administrator account.

  Help, please.

  The process I'll tell you will solve the problem, but it leaves a few effects. All the installed update will be uninstalled the version they had when you have installed 8.1 windows and programs in your programs (x 86) NO program file in the C: drive or the drive where windows is installed must be UNINSTALLED. The uninstalled programs will appear on your desktop as Applications.HTML removed. If you have any problem with the effects that I mentioned that process as follows:

  1. at start up press F11 to enter recovery.

  2. go on recovery to solve problems.

  3. then in troubleshooting, click on refresh your PC.

  4. wait it ends (it takes about an hour)

  5. your system is restored.

  Hope this helps

• Computer Dell laptop does not start

  Was an upgrade and lost power or connectivity during the upgrade
  now my laptop will not boot.

  Is there a way to return to a previous start-up and it stand up, so I'm able
  use and restore updates.

  ~ tom

  Looks like the partition is damaged. I fear that even a repair check does not work, the best that we can suggest is reinstalling new windows.

• Portege R830 - Windows does not start after I have install Comodo Firewall

  Good afternoon

  I bought today a Portege R830, and after the Windows configuration, the first program that I installed was the popular free Comodo Firewall. After that I restarted, Windows 7 unbootable. It would be stuck on the user login screen and I know it's a problem with the firewall because if I do a system restore to the restore point created by Setup of firewall, windows restarts.

  So I ask if there is any inconsistency between the firewall and software on the Toshiba. A that someone already had this problem? I tried to solve this problem throughout the day with no results. I even re-installed Windows 7 using the Toshiba Recovery and the problem persists. I really like the Comodo and I want this firewall on my laptop, but Windows does not just start!

  Any help would be apreciated.

  Hi jillefsky,.

  Have you disabled the Windows Firewall before you start with the installation of Comodo Firewall? As far as I know, Portege R830 is delivered with preinstalled McAfee security software and you must remove this program before you install other security tools.

  Generally this has nothing to do with Toshiba and it s advisable to contact Comodo directly. They may know about this so they can give you a proper answer.

  But I put t understand why this program is so important to you. Windows already has an internal firewall so that these programs are not necessary in my opinion. Just install a good antivirus like AntiVir and enable the automatic updates of Windows. All that s!

• Stuck on the screen saying 'Shutting Down' after trying to install SP2 on Vista

  So I got problems with my Windows Vista. The day passed or it would freeze completely, all programs not responding. I looked around, and he said that a possible solution would be to install SP2. So I did. As he installed the first of 3 updates, it got stuck at 44% for an hour. Then, she moved to say Shutting Down, which was during the last two hours.

  I don't know what to do now. During the installation, he said do not put off your computer, and while it is said that is no longer, I'm still hesitant to do. Any ideas on what I should do? In addition, would set the gel I described previously by SP2? Or do you know of anything that could be causing it?

  Thank you

  Free unlimited installation and compatibility support is available for Windows Vista SP2 questions until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft