try to move from 32-bit windows 7 to 64 bit

Similar Questions

• Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit.

  Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit. I tried in

  safe mode and it starts to install, but get an error there as well.

  What should I do?

  So when you put the disk in it does not work properly? When the disc is inserted, you should have a window pop up with 2 options. 1. install and another to see what is on the disk. Choose to open the disc or explore. Navigate to the folder where is the photoshop CS4 .exe file (which runs the Setup program), right-click on the .exe file and choose Run as administrator and it should start. See if it will install. If this isn't the case, then read below.

  I don't know how long you got in the installation until so chances are, you will need to run the CS4 Cleanup utility. 2 levels to run but do not use 1 or 2 just type number 3.

  http://www.Adobe.com/support/contact/cs4clean.html

  You may need to run the utility windows install cleanup too

  http://support.Microsoft.com/kb/290301

  Before you try to reinstall the software make sure that adobe reader is not installed. If it is delete. It has caused problems in the past with vista and CS4 installs.

  You can also disable windows Defender and all antivirus software. You can keep UAC Windows 7.

  When installing CS4 to 90 percent, it stops almost and may take 5 to 10 minutes at the end. It's normal. What a pain huh...

  After the installation is complete, restart

  After restarting, go to the icon of CS4 64-bit or 32-bit (depends on 32-bit or 64-bit Windows 7) in the starting area, right-click on CS4 64-bit (if you have windows 7 64 bit), and then choose Properties, Compatibility tab, and then check run as administrator at the lower part. Hit apply, ok to finish.

  Now, run CS4 and run the update.

• My pc is xp p2, which I can move from 32-bit to 64-bit?

  My pc is xp p2, which I can move from 32-bit to 64-bit?

  I don't know what you mean by "xp p2. Do you mean that you have Windows XP Service Pack 2 installed?  If you want to run a 64-bit operating system, you must ensure that you have a processor 64-bit capable. You'll also need 64-bit drivers for all your hardware for any 64-bit operating system you want to install.

  Is this an older machine? Is there a reason you want to move to a 64-bit operating system? You should also be aware that you cannot move to a 64-bit to a 32 bit OS OS; You must do a clean install. MS - MVP - Elephant Boy computers - don't panic!

• Can I move from 32-bit to 64-bit without doing a full wipe and the re-installation?

  Can I move from 32-bit to 64-bit without doing a full wipe and the re-installation

  original title: 32-bit to 64-bit XP upgrade

  Can I move from 32-bit to 64-bit without doing a full wipe and the re-installation

  Sorry, but no, you can't. A new installation is required.

• Move from MAC to Windows, serial key

  My serial key would still be valid if I move from MAC to Windows, because my serial code/key does not work when you enter on my windows computer to redownload my program, so I can work on an art that I have towards people. > O <

  If you had bought Mac version serial number, you can not use it to activate on the Windows computer.

  However, you can opt for the swap of the platform for the number, so that you can use the serial number to activate on your Windows computer.

  It is a process of time and serial number won't change for Mac again.

  Refer as below:

  https://helpx.Adobe.com/x-productkb/policy-pricing/Exchange-product-language-OS.html

  For more information, please contact Adobe technical support: they will check and assist you accordingly based upon the terms and conditions.

  Click always need Help (help), and then select the Chat option:

  Contact the customer service

• Move from vista to windows 7 on the same computer. Is it necessary to make a "transfer"?

  I'm doing an upgrade on my computer from vista to windows 7.

  Am a little confused about the need to "transfer" of data to an external source.

  What is a precautionary measure, used to retrieve the data if something terrible happens?

  Or is it that, after the upgrade to windows 7, the data is then "transferred", back on the computer newly improved?

  Windows Update has nothing to with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Want to move from 32-bit vista to 64-bit vista but have no disk.

  Original title: Vista 32-bit to 64-bit without disc.

  Hi all

  First post and not very technical minded (although not completely clueless) so go easy.

  In short, I want to upgrade 32-bit vista to 64-bit vista but have no disk.

  Long story, I have a dell latitude e4300 with professional vista installed on it. I bought the laptop from a company who buys wipes of the company and sells them on. When I bought the laptop it is everything I had... the laptop, manuals, disks etc. I want to increase the memory on the laptop 6 GB but have read that I need 64 bit vista to take advantage of this.

  So, how can I do this with only the product code for windows? or is this even possible?

  Thank you very much

  John

  "Can I move a version 32-bit Windows to a 64-bit version of Windows?

  N ° if you are currently running a 32-bit version of Windows, you can only perform an upgrade to another 32-bit version of Windows. Similarly, if you run a 64-bit version of Windows, you can only perform an upgrade to another 64-bit Windows version. »

  Re. :

  32-bit and 64-bit Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/32-bit-and-64-bit-Windows#1TC=Windows-Vista

  Also:

  "Windows Vista Compatibility Center is no longer available"

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  and,

  See why upgrade to Windows 7 makes sense

  However, and my dilemma who found your post, amounts to:

  1. If you head to 64-bit (a number somewhere North of 1.844 E19 one approach the number of electrons in a Coulomb for free!) AND you don't have a product key, why not make the leap to 8.1 Windows 64-bit? and,
  2. It should be first of ALL to ensure that your "32-bit" software will run in a 64 bit environment especially make sure that your printer has a compatible driver update.

  PS Your interest to think "upward" is necessary and laudable.  Your question is carefully constructed.  It has never been my experience to find the answers except kind, helpful and generous in the community Microsoft.  Similarly, it is called the 'social media' or 'public access' sites (YouTube, for example) where the landscape is littered with fecal printing.

• Move from Vista to Windows 7 AND transfer on a different hard disk operating system

  I want to upgrade to Windows 7 64-bit and in the same movement of time the OS Vista Home Premium 32-bit & a Seagate 80 GB HARD drive to two 250 GB hard drives in a RAID configuration. I intend to replace the 80 GB HARD disk with a faster drive Windows XP, so I find myself with a dual-boot system.  Apart from the exchange of small hard drives, the system will be unchanged compared to when I activated Vista.  Since it seems I have to reinstall all the programs on W7 in any case (damn and the breath), I wonder if it will be necessary (for reasons of product activation) or useful (for operational reasons) to first clone Vista to the larger players. I am aware that Seagate provides cloning software, also free that 250 GB seems a little bit today - but he will do well while this PC is still working. In case it is relevant, the Vista is OEM (I built the PC and I bought Vista with the motherboard), but I will get the retail version of Windows 7.  Most experts with thanks...

  Hello
   
  We cannot move the operating system from one hard disk to another. However, we can install the operating system on another hard drive or take the whole operating system if necessary system image backup.
  NOTE: You'll have to do a custom Setup to upgrade to the 64 bit version of Windows 7.
  Windows Backup gives you the opportunity to create a system image, which is an exact image of a disk. A system image includes Windows and your control panel, programs and files. You can use a system image to restore the contents of your computer if your hard drive or computer ever stops working. When you restore your computer from a system image, it's a complete restoration; You cannot choose to restore individual items and all of your current programs, Control Panel, and the files are overwritten.
   
  For more information on install, reinstall, or uninstall Windows, visit this link:
  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall
   
  For more information about backup types, see this link:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Move from Vista to Windows 7 stops at 62%.

  I'm upgrading from Win Vista Home Premium 32 bit to Win 7 Home Premium 32 bit (store bought).  I run and respected of all diagnoses of MS and added the new environment variable according to the MS fix, but my system is still unable to progress beyond 62% completion.  I tried this vain 3 X.  What else can I try beyond a new installation?

  Moved from Vista to install, upgrade and activate Forum.

  See below for additional solutions:

  62% patch for Vista upgrade:
  http://www.SevenForums.com/installation-setup/36351-Microsoft-fixes-62-upgrade-hang-issue.html

  Upgrade stops responding (hangs) at 62% when you upgrade to Windows 7
  http://support.Microsoft.com/kb/975253

  Windows 7 upgrade from Vista stuck at 63% (not the issue as 62%)
  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/4ed7e497-6b79-4978-afb4-17d6b0a31e33

• Having a problem of home movie from Director of Windows on a dvd.

  I'm trying to publish a movie on dvd.  The encoding has frozen.  So, I'm now trying to publish to this computer.  That won't happen either.  It says the following: WMM cannot publish to the specified location.  Check the original source files in your movie are still available, the publishing location is still available, enough free disk and try again.  There is enough free space on my computer, the location of publication is the computer and the used files are still there.  Help, please.  Do not know what to do to get this movie on DVD.

  Hi regshan,

  Welcome on the site of Microsoft Windows Vista Community.

  Causes of the error message:
  -Moved or renamed the files or folders you used original
  -Computer memory inadequate for the complexity of your project, combined to tasks other than your computer is done as it makes the movie.
  -By using the source files that do not work with Movie Maker, or are corrupted.
  -Required Codec may be corrupt / missing
  -Most of the problems of this type are linked to source incompatible, ether video, audio or image files

  Suggestions to overcome the error message:

  1: reduce the size of the movie file
  2: reduce the Movie setting size
  3: increase the size of the swap file
  4: save the movie in smaller Sections
  5: save the movie in a lower resolution.
  6: Download and install the latest video codec pack to fix.
  7: converted all files in .wmv files and works well.

  I also suggest you to reference the link to the KB article that has the error message when you try to publish a movie using Windows Movie Maker in Windows Vista: 'Cannot complete publish movie': http://support.microsoft.com/kb/930435

  Check reference links:

  Publish a movie in Windows Movie Maker: http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker
  Solve problems with publishing a movie to your computer: http://Windows.Microsoft.com/en-SG/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• try to migrate from dell laptop windows 7 for Mac Lion Fusion 5

  I managed to install a virtual maching runing windows 7, but when I try to migrate using the IP address, I get the message following "Migration converter cannot connect to the remote computer" that the two computers are on the same network.

  Also tried to use the code of access but execution in an other error message.

  Don't forget: the windows OEM licenses cannot be legally virtualized.

  And since you can buy a license anyway, you had better build a VM from scratch - convert VM (especially of the pc vendors) is swollen and unstable.

  If you do not need to convert (and have a way to get a legal license) using the standalone vmware converter and build the virtual machine on an external drive connected to the PC.

• How can I move my movie from Director of windows for creating windows dvd

  I made my movie using the movie maker but cannot transfer to DVD was created to add the scene selection and menu title. Can anyone help?

  The following article might be worth a visit:

  "Import files into Windows Movie Maker"
  "Publish and burn a movie to a DVD.
  http://m-Lov.blogspot.com/2007/11/you-can-use-Windows-Movie-Maker-to.html

• Move from vista to windows from one computer to another

  My brother has installed Windows 7 Enterprise on my way of thinking a laptop girls that product key could go on another computer.  It did not work.  Now I have Windows 7 (not authentic) here.  I have another computer that has Windows Vista on it, but the computer is slow and not used often.  How do I uninstall Vista slow computer and then install on the laptop with the same product key?  I don't have the Vista disc more either.  I called Microsoft assistance, they wanted to charge me $60.00 to guide me through it.  I already bought the software, just lost the disc.  All I want to do is transfer from one computer to the other.  Thanks for any help you can give me.

  His computer did not have Vista on it.  I have no problem to uninstall the other computer to put it on his own.  However, I don't have the Vista disc more either.  That will be a problem or I can install it online?

  Hey vrobbins

  There is no download online free and legal from vista

  read this on how to replace software

  This article describes how to easily order service packs on CD, replace Microsoft software or hardware, and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Walter, the time zone traveller

• Move from Vista to Windows 7 - partitions

  Hello!

  I just got my new Thinkpad SL500 at home - with Vista Home built in. I think to upgrade to Windows 7 Professional, but I have to ask about partitions.

  There are 3 partitions on my hard drive:

  C: partition system "SW_Preload".

  Q: "Servicev003 system boot partition."

  S: recovery partition "Lenovo."

  I don't know that I can get rid off the coast to keep my Lenovo features intact while changing Win 7 (I've seen change, because the real change would be not an upgrade, but complete reinstall with deletion of the old system) partitions.

  Can I delete the partition q: "Servicev003?" Is - only used for Windows Vista or the only some features of Lenovo recovery? And the score of "Lenovo"?

  All drivers are already available for Windows 7 Lenovo utilities?

  Thank you for all advice.

  George

  Hello

  The Q score is to begin rescue and Recovery in case your partition C cannot start. Then you can restore your system to the image of the factory of the partition of S. The S partition will contain your Vista Home image, so it's not useful for you once you upgrade.

  First thing you can do is to generate these partitions recovery media. You can use R & R to do. You will get a bootable CD with R R & Q score and two DVDs of the partition of S containing Vista.

  Personally, I then removed the two partitions and installed Windows 7.  You can then use R & R to generate a new image of the system on a DVD. I recommend waiting until you have all you apps installed and the system set up. If you need to recover, then you start from the R & R CD and recover from the DVD.

  I believe that it is possible to keep the partition Q but the boot sector will be replaced by Windows 7 so it needs to be restored to allow to boot in S. As I have never done this, maybe someone else can help.

  The only way to get a full range of partitions is to use an image of Lenovo. I do not think that Lenovo offers these?

  Personally I prefer for other alternatives of R & R like Acronis True Image, but the principle is the same, a bootable CD, then the image of an operating system on another media such as DVD or a network drive.

  10 + years that I've never had to do a full restore so the convenience of having R & R available on the blue button does not for me outweighed the loss of space on a small SSD (80 GB).

  Carpet

• move from vista to windows 7

  Computer store took off my vista to fix my computer. They put on the temp version and told me to reinstall my cd. Cannot find my Act. so, code bought Windows 7. How to make fake out and new on?

  Hello

  I would always go back and demand that they fix your computer correctly or you refund.

  But, your choice.

  "How to do a clean Windows 7" install

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  And do the following before you start:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  See you soon.