Trying to create a script that lists all clusters in a data center

Similar Questions

• PowerCLI Script required to identify all clusters in a data center and all hosts within each cluster and calculate it using cpu and ram, avg, min, and max.

  Hi all

  I'm new to powercli and try to create a script to list all clusters in a data center and all hosts in a cluster and calculate min, max and avg cpu usage and ram by the host and cluster. So far, I have tried the below but I can't publish the results of my script.

  $Function = @)
  ForEach ($DataCenter Get-Data Center)
  {
  ForEach ($cluster in ($DataCenter |)) Get - Cluster)) - need help to post the information here and confirm if this is correct or not.
  {
  ForEach ($hosts in ($cluster |)) Get - VMHost))
  {
  ForEach ($vms to ($hosts |)) Get - VM)) - do not know if I called you here functions properly
  {
  $allvms = @)
  $allhosts = @)
  $hosts = get-VMHost
  $vms = get - Vm

  {foreach ($vms in $hosts)
  $hoststat = "" | Select the host name, MemMax, MemAvg, MemMin, CPUMax, CPUAvg, CPUMin
  $hoststat. Host name = $vmHost.name
  
  $statcpu = get-Stat-entity ($vmHost) - start (get-date). AddDays(-30)-Finish (Get-Date) - MaxSamples 10000 - stat cpu.usage.average
  $statmem = get-Stat-entity ($vmHost) - start (get-date). AddDays(-30)-Finish (Get-Date) - MaxSamples 10000 - stat mem.usage.average

  $cpu = $statcpu | Measure-object-property value - average - Maximum - Minimum
  $mem = $statmem | Measure-object-property value - average - Maximum - Minimum
  
  $hoststat. CPUMax = $cpu. Maximum
  $hoststat. CPUAvg = $cpu. Average
  $hoststat. CPUMin = $cpu. Minimum
  $hoststat. MemMax = $mem. Maximum
  $hoststat. MemAvg = $mem. Average
  $hoststat. MemMin = $mem. Minimum
  $allhosts += $hoststat
  }
  }
  }
  }
  }

  $Function | Select the host name, MemMax, MemAvg, MemMin, CPUMax, CPUAvg, CPUMin | Export-Csv "c:\Function.csv" - noTypeInformation

  Any help on this is much appreciated.

  [Ordered] casting was introduced in v3 PowerShell.

  For PowerShell v2, you can use

  $vms = get - VM

  $stat = 'cpu.usage.average ','mem.usage.average '.

  $start = (get-Date). AddDays(-31)

  $report = get-Stat-entity $vms - start $start - Stat $stat - ErrorAction SilentlyContinue |

  Group-object - property {$_.} @entity.name} | %{

  $cpu = $_. Group | where {$_.} MetricId - eq "cpu.usage.average"} | Measure-object-property value - average - Maximum - Minimum

  $mem = $_. Group | where {$_.} MetricId - eq "mem.usage.average"} | Measure-object-property value - average - Maximum - Minimum

  New-object PSObject-property @ {}

  Datacenter = Get-Datacenter - VM $_. Group [0]. Entity | Select the name of ExpandProperty-

  Cluster Cluster Get - VM = $_. Group [0]. Entity | Select the name of ExpandProperty-

  VMHost = $_. Group [0]. Entity.Host.Name

  Name = $_. Group [0]. @entity.name

  CpuMin = $cpu. Minimum

  CpuAvg = $cpu. Average

  CpuMax = $cpu. Maximum

  MemMin = $mem. Minimum

  MemAvg = $mem. Average

  MemMax = $mem. Maximum

  }

  }

  $report | Sort-Object-property Datacenter, Cluster, VMHost name |

  Export Csv report.csv - NoTypeInformation - UseCulture

• Create a script to list all the .bat and .cmd files with the dir command &

  Hello

  Im trying to create a script that will list all the .bat and .cmd files in a specific folder and add the data to a new file (file.txt) - example below:

  dir c:\>desktop\file.txt/OD
  dir d:\>>desktop\file.txt
  dir f:\jobs\*.bat>>desktop\file.txt/OD

  IM able to search the F drive and the list of all the .bat files using a generic parameter, but ideally id like to search for .bat and .cmd files, but whenever I have it try does not work. Any ideas?

  I tried the following:

  dir c:\>desktop\file.txt/OD
  dir d:\>>desktop\file.txt
  dir f:\jobs\*.bat,*.cmd>>desktop\file.txt/OD

  Any help is appreciated, the reason for which I need to check all the .bat and .cmd files is to ensure that the scripts on a cluster are all data, so need them all listed in a doc if possible

  Thank you

  Hello

  Thank you for visiting the Microsoft answers community site. Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for guys official script Forum. Please ask your question in the official Scripting Guys Forum.

  http://social.technet.Microsoft.com/forums/en-us/iTCG/threads

• Need a PowerShell Script to list all my stores of data, capacity and VMFS format.

  All,

  I need a script to list all my stores of data, capacity and VMFS format.

  That's what I have so far but its does not give me the results I need.

  Get-Datastore - Datacenter MN_PROD | where {$_.} Type - eq "VMFS"} | Select-Object Name,@{N="VMFS version. {E = {$_.Info.Vmfs.Version}}

  Try like this

  Get-Datastore -Datacenter MN_PROD | where {$_.Type -eq "VMFS"} | Select-Object Name,CapacityGB,    @{N="VMFS version";E={$_.FileSystemVersion}}
  

• Script to list all the warehouses of data in a cluster, the virtual machines on the data store and the host of the virtual machine is on

  We have warehouses of data which are seen by more than one cluster. I need a script that will display:

  all stores of data seen by a cluster

  the virtual machines on the data store

  the host of the virtual machine is on

  the cluster the host is in

  The output I want is

  name of the store of data, the VM name, host name, the name of the Cluster

  any help would be appreciated

  Pretty sure this will do what you need:

  $report = @()
  Foreach($cluster in Get-Cluster){
      $datastores = $cluster | Get-VMHost | Get-Datastore
      foreach($datastore in $datastores){
      $vms = $datastore | Get-VM
      If ($vms.count -ge 1){
          foreach($VM in $vms){
          $object = New-Object -TypeName PSObject -Property @{
                Datastore = $datastore.Name
                VM = $VM.Name
                HostName = $VM.VMhost
                Cluster = $cluster
              }
          $report += $object
          }
  
      }
      }
  }
  $report | Export-Csv C:\Temp\VMs.csv -NoTypeInformation -UseCulture
  

  If you only want to shared data warehouses you can then use

  $datastores = $cluster | Get-VMHost | Get-Datastore | Where {$_.Extensiondata.Summary.MultipleHostAccess -eq $True}
  

  Hope this helps

• vCO - get all clusters in a data center

  Do you know how can I get a list of all the Clusters that are in a center of some data?

  Thanks in advance

  This task code that contains a script can do...

  Entry: Data Center (VC:Datacenter)

  Output: clusters (table / VC:ClusterComputeResource)

  Script:

  var clusters = new Array;
  var folder = datacenter.hostFolder;
  var children = folder.childEntity;
  for each (child in children){
      if (child instanceof VcClusterComputeResource){
          clusters.push(child);
          System.debug("Cluster added: "+child.name);
      }
  }
  

  If the above code to be used in an action rather than a script task, simply add the following to the first line (useful when used in presentation settings):

  if(datacenter == null) return null;
  

  And this for the last line:

  return clusters;
  

• Need a script to list all virtual machines on specific data warehouses

  I am trying to find a way to list all virtual computers on specific data warehouses. I use vSphere 5.1 and so far I got this:

  Get-Datastore. where {$_ .name - like ' * XXX * ""} | Get - VM | Select name, @{N = "Datastore"; {E = {Get-Datastore - VM $_}} | Sort name | FT - one

  This kind of work, but it would be perfect if I got this:

  -Group data store

  -Unique virtual machines (VMS to report only to the data store where the VMX)

  Any help appreciated.

  I relied on the fact that the first in the list would be the data store that holds the VMX, which apparently is a misconception.

  Try like this

  Get-Datastore-Name ' * xxx *' |

  Get - VM | Select the name,

  @{N = "Datastore"; E={$_. {{ExtensionData.Config.Files.VmPathName.split ('[]') [1]}} |

  Tri-objet-property data store name |

  Format-Table - AutoSize

• Need a script that lists the VM with a snapshot

  Hello

  I am relatively new to powershell scripting and even newer to the vSphere CLI. I have no problem reading and understanding scripts, but what makes one is another story. In any case, I'm looking for help to create a script that will check that all the vm's on all ESX hosts, if they have a snapshot and if they echo the name of the virtual machine to the screen.

  That's what I have so far but I'm stuck and probably on the wrong track. Any help/suggestions are welcome!

  $user = "< removed >.
  $passw = "< removed >.
  $VIServers = "< IP ESXi host >", "< IP ESX Host1 >', '< IP ESX Host2 >', '< IP ESX Host3 >', '< IP ESX Host4 >', '< IP ESX Host5 >', '< IP ESX Host6 >.

  {foreach ($VIServer to $ViServers)
  SE connect-VIServer-Server $VIServer - user $user-password $passw
  $vms = get-vmhost $VIServer | Get - vm

  {foreach ($vm to $vms)
  < code that checks to see if there is a snapshot and echo is the name of the virtual machine to the screen. Clueless >

  }
  }
  }

  Forward thanks!

  Kind regards

  Erik

  Why directly to the ESX: you?... To connect to vCenter instead and then it s very easy...

  Get - VM | Get-Snapshot | Select the virtual machine, name, Description, created. Kind created

  Kenth-

• I am trying to create a function that would be on the table type returns.

  Gurus,
  
  I am trying to create a function that returns a table nested with 3
  columns in a table as a guy.
  
  my query is like
  
  Select col1, col2, col3 from table_1;
  
  I am a bit newbie in Oracle and have never used collections.
  Can you please guide?

  >
  I am a bit newbie in Oracle and have never used collections.
  >
  Then you should start with the documentation
  http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28370/TOC.htm

  Chapter 5 is all about collections using PL/SQL and examples
  >
  I am trying to create a function that returns a table nested with 3
  columns in a table as a guy.
  >
  This isn't enough of a description to know what you're trying to do, or how you plan to use the service. The query you provided is completely irrelevant to the question you are asking.

  You ask about functions in pipeline? Here is an example of this

  -- type to match emp record
  create or replace type emp_scalar_type as object
    (EMPNO NUMBER(4) ,
     ENAME VARCHAR2(10),
     JOB VARCHAR2(9),
     MGR NUMBER(4),
     HIREDATE DATE,
     SAL NUMBER(7, 2),
     COMM NUMBER(7, 2),
     DEPTNO NUMBER(2)
    )
    /
  
  -- table of emp records
  create or replace type emp_table_type as table of emp_scalar_type
    /
  
  -- pipelined function 
  
  create or replace function get_emp( p_deptno in number )
    return emp_table_type
    PIPELINED
    as
     TYPE EmpCurTyp IS REF CURSOR RETURN emp%ROWTYPE;
      emp_cv EmpCurTyp;
      l_rec  emp%rowtype;
    begin
      open emp_cv for select * from emp where deptno = p_deptno;
      loop
        fetch emp_cv into l_rec;
        exit when (emp_cv%notfound);
        pipe row( emp_scalar_type( l_rec.empno, LOWER(l_rec.ename),
            l_rec.job, l_rec.mgr, l_rec.hiredate, l_rec.sal, l_rec.comm, l_rec.deptno ) );
      end loop;
      return;
    end;
    /
  
  select * from table(get_emp(20))
  

• Active script that selects all of the items spread

  I'm trying to find a 'simple' script that selects all elements on the page, either a group or individual items without using a dialog window. Is there a selection simple javascript to select all the objects on a page or spread for InDesign CS3? I'm new to this sort of thing script.

  Hey!

  PankChat is right, but you can't 'see' the selection.

  If you want to 'see' what is selected, try this:

  app.select(app.activeWindow.activePage.allPageItems);
  

  tomaxxi

• Script to list all bookmarks in top/Parent not bookmarks Sub

  Hello

  Can someone advise please how to modify the following script, which lists the tree entire bookmark list on the contrary all bookmarks in high level and not bookmarks under?

  This is the script that I used that lists all bookmarks.

  / * All bookmarks in the list * /.
  / * Work recursive l‟arbre bookmark * /.
  function PrintBookmarks (bm, nLevel)
  {
  If (nLevel! = 0) {/ / do not print the root}
  bmReport.absIndent = bmTab *(nLevel-1);
  BM. Execute();
  bmReport.writeText ("(page #) ' + (bm.doc.pageNum + 1) +" "+ bm.name");

  }
  If (bm.children! = null)
  for (var i = 0; i < bm.children.length; i ++)
  PrintBookmarks (bm.children [i], nLevel + 1);
  }
  bmTab = 20;
  bmReport = new Report();
  bmReport.size = 2;
  bmReport.writeText (this.title);
  bmReport.writeText("");
  bmReport.size = 1.5;
  bmReport.writeText ("list bookmarks");
  bmReport.writeText("");
  bmReport.size = 1;
  PrintBookmarks (this.bookmarkRoot, 0);
  global.bmRep = bmReport;  do global
  global.wrtDoc = app.setInterval)
  "Try {'} '.
  +' reportDoc = global.bmRep.open ("list bookmarks"); "
  "+' console.println ("open Executed");"
  + "app.clearInterval (global.wrtDoc);"
  +' delete global.wrtDoc;'
  "+' console.println ("App.clearInterval Executed");"
  + "reportDoc.info.title = 'Bookmarks lists';"
  + "reportDoc.info.Author ="Bookmark Sequence list";"
  {+'} catch (e) {console.println ("Meanwhile...:" + e) ";}"}
  (100);

  Any help will be most appreciated.

  Use the PrintBookmarks function:

  If (bm.children! = null & nLevel == 0)

• y at - it a web page that lists all the supported versions of Firefox?

  We wish to state our user doc recommended Firefox versions. So it is the web page that lists all the supported versions of Firefox and can also, we have a list of dates to drop support for versions currently supported?

  Yes, it has changed a bit since this thread was started 9 months ago. Support for Firefox 3.6.x continues and versions 4 + lose support at the next new version is available. Support for Firefox 7 ended when Firefox 8 came out yesterday 11 / 08.

  Support for 3.6.x will likely end early next year when the proposed new ESR (Extended Support Release) comes to massive institutional facilities / corporate. ESR is proposed for a week 42 version support cycle timetable of a 'standard' of the week quick release 6.

• How to display this window that lists all the devices of storage connected to my PC?

  How to display this window that lists all the devices of storage connected to my PC? It lists each device, how much space is used and how much is free? I sometimes open it by accident, but I can never find it when I'm looking for it.

  original title: storage devices

  Beginning

  Control Panel

  If you the small icons view do the following:

  Administration tools

  Computer management

  Storage

  Disk Managment

  If you have the category view do the following:

  System and security

  Administration tools

  Computer management

  Storage

  Disk management

• Adobe web page that lists all the CS2 serial numbers?

  Lost my serial number CS2 web page URL. Can someone point me to the Adobe web page that lists all the CS2 serial numbers?

  You will need to re - install my copy of Acrobat.

  Hi INTP1000,

  If you have purchased from Adobe, you will be able to locate the serial key using this link find your serial number quickly. Make sure that you use the Adobe ID under which you have registered the product.

  Kind regards
  Nicos

• Is it possible to create a tag that lists the individual labels [keywords] for each position? The current {tag_blogtaglist} creates an endless list of tags.

  Is it possible to create a tag that lists the individual labels [keywords] for each position? The current {tag_blogtaglist} creates an endless list of tags.

  If you can get hands on with the ID of blog post that you can list the tags assigned to this post particularly blog using module_data. It would be only possible with the new BC. Active following rendering engine. Here are some resources to point you in the right direction: how to activate the BC. Next - http://docs.businesscatalyst.com/developers/liquid/introduction-to-liquid#enable how to use module_data - odule_data http://docs.businesscatalyst.com/developers/liquid/consuming-apis-in-the-front-end-using-m install app BC API discovered to get you started on the syntax - http://docs.businesscatalyst.com/developers/apps/bc-api-discovery module data that lists the tags assigned to a blog post looks like this: {module_data = 'blogposts' version = "v3" field resource = subresource 'tag' = "tags" resourceId = collection "303870" = "myData"} resourceId is the blog ID to render tags for. Hope this helps, Mihai