Trying to understand the LEDs on a WRT54G

Similar Questions

• Hello out there! I am trying to understand the relationship between the products. I am a current user of 13 items and sought to CC Photoshop with Lightroom. Always use elements like the storage tool to catalog my photos or it get replaced?

  Hello out there! I am trying to understand the relationship between the products. I am a current user of 13 items and sought to CC Photoshop with Lightroom. Always use elements like the storage tool to catalog my photos or it get replaced?

  It's kind of ridiculous. All I want to do is ask a question and there is no place to connect with anyone. Sucks!

  Hi charlesf,

  If you choose to go to CC Photoshop with Lightroom, Photoshop Elements would not be replaced.

  CC of Photoshop and Photoshop Elements are different programs, so the two will remain separate on your machine and catalogue items would not hit at all.

  Let us know if you have any other questions.

  Kind regards

  Claes

• Trying to understand the different options of VMware SSO

  Hi guys, I'm trying to understand the different options of SSO and also to get a better idea for best practices to install it. As you all know, there are three options: vCenter Single Sign-on for your first vCenter vCenter Server Single Sign-On for an additional vCenter server into an existing site vCenter Single Sign-On for server vCenter Server further with a new site, I have the following questions: 1. If I saw servers existing vCenter running 5.5 on Windows Server 2008 R2 , but I want to remove them and replace them with some vCenters running Windows R2 2012, choose option 1 when you install the new vCenters?  Or, I can choose option 2 and then decommission the previous vCenter Server SSO running at a later date? 2 is the first Single Sign-on server special somehow?  It's like a "Primary" SSO server because it was the first installed?  I have to take special precautions when installing it? 3. Finally, what is the best practice when you install a second vCenter in a recovery site?  I think the most logical method of installing SSO installation vCenter Single Sign-On for server vCenter Server further with a new site in the Dr site existing rather vCenter Single Sign-On for an additional vCenter Server in a site.  My thought on that is if the protected site falls down, there should be nothing that links the two sites, so the DR site should have its own SSO Server and this server should be in a new site.  But is that correct?  Can I install using "vCenter Single Sign-On for an additional vCenter server into an existing site" without creating dependencies between the two sites? I know there are a lot of articles out there about SSO, but I'm really sure about these specific scenarios yet, any help would be appreciated. Thank you, Duncan.

  Duncan,

  If I read correctly that you want to build a ' soft/new' montage of the Vcenter on 2012 while your existing running in parallel?  If so, the standards body will be independent and you must select option 1 for a new installation. Then, when you get all migrated to new VCenter you old deocmmission.

  As far as DR goes, Yes, it is recommended to have a separate SSO on the secondary site and then you choose option 2 and connect it to the main site.  5.5 U1 will replicate the changes between the 2, but if one goes down you will still be able to operate independently.  I also recommend to check the methods related to a pane of glass.

• How to add a plugin, that is, I need one for a statement of the Fund or at another location. I tried to understand the caps, but I don't know.

  I tried to find some plugin but I do not have them. I need a plug-in for instruction at the cash register, for example. Where can I find or bring?

  Hello. A plug-in is an additional bit of software that requires a service so that you use a site or view certain content.

  When it is necessary that have not already installed you, you should be presented with the option to download the plug-in from the software company, which can take you to the site you were using. Once installed, restart Firefox and return to the page or service you were watching. You should now be able to use the use of the site and see the content that was previously blocked.

  Be sure to keep plugins up to date. Check occasionally to make sure you use the good versions by visiting this site.

• Mac Mini to crash, trying to understand the panic report

  My Late 2009 Mac Mini Core2Duo 8 GB Ram started to crash and this is the last report of panic.  I don't understand what is the error.

  Anonymous UUID:

  89505A63-49A1-1409-1B56-F6C97DB19897

  Sun Apr 10 16:06:38 2016

  Panic report *.

  panic (cpu 0 0xffffff801eef437e appellant): ' thread_invoke: preemption_level 1, possible cause: blocking while holding a spinlock, or within interruption context"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.40.184/osfmk/kern/s ched_prim.c:2068.

  Backtrace (CPU 0), frame: return address

  0xffffff812896b800: 0xffffff801eedab12

  0xffffff812896b880: 0xffffff801eef437e

  0xffffff812896b910: 0xffffff801eef0def

  0xffffff812896b950: 0xffffff801efc6650

  0xffffff812896b9c0: 0xffffff801f486c3c

  0xffffff812896b9f0: 0xffffff801f486c9f

  0xffffff812896ba10: 0xffffff801f48c420

  0xffffff812896ba30: 0xffffff801f48c45d

  0xffffff812896ba40: 0xffffff7f9fc31557

  0xffffff812896bae0: 0xffffff7f9fd1e0cc

  0xffffff812896bbc0: 0xffffff7f9fbe2e8c

  0xffffff812896bc30: 0xffffff7f9fc294c4

  0xffffff812896bcc0: 0xffffff7f9fc31892

  0xffffff812896bd00: 0xffffff7f9fb54a7c

  0xffffff812896bd80: 0xffffff7f9faeadcc

  0xffffff812896be10: 0xffffff801f4b5958

  0xffffff812896be80: 0xffffff7f9faea65f

  0xffffff812896bee0: 0xffffff7f9faef971

  0xffffff812896bf20: 0xffffff7f9faef6cf

  0xffffff812896bf40: 0xffffff801f4b27c1

  0xffffff812896bf80: 0xffffff801f4b28b6

  0xffffff812896bfb0: 0xffffff801efc8e27

  	Extensions of core in backtrace:
  	com.apple.iokit.IOUSBHostFamily (1.0.1) [4C8B5BB6-6AE4-313E-B79C-AC07A4E31A2D] @ fffff7f9fab6000-0xffffff7f9fb1efff > 0xf
  	dependency: com.apple.driver.AppleUSBHostMergeProperties (1.0.1) [52E62355C]@0xffffff7f9fab2000 9D5F86A1-76EF-3007 - 94 CA-496
  	com.apple.iokit.IOUSBFamily (900.4.1) [7B5AC81A-D0B6-3F3D-87C7-AFD78F4686DB] @0xfff fff7f9fb28000-> 0xffffff7f9fbc1fff
  	dependency: com.apple.iokit.IOPCIFamily (2.9) [4FE41F9B-2849-322A-BBF8-A94816C003D6] @ 7f9f72c000 0xffffff
  	dependency: com.apple.iokit.IOUSBHostFamily (1.0.1) [4C8B5BB6-6AE4-313E-B79C-AC07A4E31A2D] @0 x ffffff7f9fab6000
  	com.realtek.driver.RtWlanU (1830.2b9) [341CBE7A-D4DF-3A6D-A06E-92B6EE2F4EA4] @0xfff fff7f9fbd4000-> 0xffffff7f9ff46fff
  	dependency: (3.2) com.apple.iokit.IONetworkingFamily [848B398F-4D96-3024-8092-6CD3534D2CCA] @0 xffffff7f9fa7e000
  	dependency: ffff7f9fb28000 @0xff com.apple.iokit.IOUSBFamily (900.4.1) [7B5AC81A-D0B6-3F3D-87C7-AFD78F4686DB]

  Corresponding to the current thread BSD process name: kernel_task

  Mac OS version:

  15E65

  Kernel version:

  15.4.0 Darwin kernel version: Fri Feb 26 22:08:05 PST 2016; root:XNU-3248.40.184~3/RELEASE_X86_64

  Kernel UUID: 4E7B4496-0B81-34E9-97AF-F316103B0839

  Slide kernel:

  0x000000001ec00000

  Text of core base: 0xffffff801ee00000

  Text __HIB base: 0xffffff801ed00000

  Name of system model: Macmini3, 1 (Mac-F22C86C8)

  Availability of the system in nanoseconds: 13927482804366

  last load kext to 13844240430139: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7fa1bbb000 size 32768)

  Finally unloaded kext to 13907399057741: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7fa1bbb000 size 32768)

  kexts responsible:

  com.realtek.driver.RtWlanU 1830.2.b9

  com Apple.filesystems.afpfs 11.0

  com Apple.NKE.asp - tcp 8.0.0

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.driver.ApplePlatformEnabler 2.6.0d0

  com.apple.driver.AGPM 110.21.18

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleMCCSControl 1.2.13

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.iokit.IOBluetoothSerialManager 4.4.4f4

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleLPC 3.1

  com.apple.GeForceTesla 10.0.0

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.4f4

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  com.apple.driver.AppleIRController 327,5

  com.apple.driver.AppleUSBStorageCoexistentDriver 3.7.1

  com.apple.iokit.SCSITaskUserClient 3.7.7

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.AirPortBrcm43224 700.36.24

  com.apple.driver.AppleFWOHCI 5.5.2

  com.apple.driver.AppleAHCIPort 3.1.8

  com Apple.nvenet 2.0.22

  com.apple.driver.usb.AppleUSBOHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com.apple.security.SecureRemotePassword 1.0

  com.apple.AppleGraphicsDeviceControl 3.12.6

  com Apple.kext.Triggers 1.0

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.iokit.IOSurface 108.2.1

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0

  com.apple.nvidia.classic.NVDAResmanTesla 10.0.0

  com.apple.driver.AppleHDAController 274.7

  com.apple.iokit.IOHDAFamily 274.7

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.4f4

  com.apple.iokit.IOBluetoothFamily 4.4.4f4

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.driver.AppleSMC 3.1.9

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

  com.apple.driver.AppleUSBAudio 303.3.1

  com.apple.iokit.IOAudioFamily 204.3

  com.apple.vecLib.kext 1.2.0

  com.apple.driver.CoreStorage 517.20.1

  com.apple.iokit.IOUSBHIDDriver 900.4.1

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOUSBMassStorageClass 4.0.2

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

  com.apple.iokit.IOBDStorageFamily 1.8

  com.apple.iokit.IODVDStorageFamily 1.8

  com.apple.iokit.IOCDStorageFamily 1.8

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com Apple.Driver.USB.cdc 5.0.0

  com.Apple.Driver.USB.Networking 5.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.iokit.IOAHCISerialATAPI 2.6.2

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.iokit.IO80211Family 1110.26

  com Apple.Driver.corecapture 1.0.4

  com.apple.iokit.IOFireWireFamily 4.6.0

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.iokit.IONetworkingFamily 3.2

  com.apple.driver.usb.AppleUSBOHCI 1.0.1

  com.apple.driver.usb.AppleUSBEHCI 1.0.1

  2.2.9 com.apple.driver.NVSMU

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417.2

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Model: Macmini3, 1, MM31.00AD.B00 of BootROM, 2 processors, Intel Core 2 Duo, 2.26 GHz, 8 GB, MSC 1.35f1

  Graphics card: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1067 MHz, 0x859B, 0x435434473353313036374D2E4D3136464B44

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1067 MHz, 0x859B, 0x435434473353313036374D2E4D3136464B44

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 90), Broadcom BCM43xx 1.0 (5.10.131.36.16)

  Bluetooth: Version 4.4.4f4 17685, 3 services, 27 aircraft, 1 incoming serial ports

  Service network: Ethernet, Ethernet, en0

  Network service: Wi - Fi, AirPort, en1

  Serial ATA Device: ST500LM021-1KJ152, 500,11 GB

  Serial ATA Device: OPTIARC DVD RW AD - 5670S

  USB device: USB 2.0 Bus

  USB Device: HDD external

  USB Device: 802.11n NIC

  USB device: USB 2.0 Bus

  USB device: USB Bus

  USB device: USB 2.0 hubs

  USB device: USB keyboard

  USB device: Gaming mouse

  USB Device: IR receiver

  USB device: USB Bus

  USB device: C-Media USB Headphone Set

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  Crush Bus:

  The panic was apparently caused by the Realtek USB network device or its software. I suggest that you unplug the unit and then remove the software.

  Any third party software that is not installed on the App Store or by drag-and - drop in the Applications folder and uninstall by drag - move to the trash, is a modification of the system.

  Whenever you delete changes to the system, they must be eliminated completely, and the only way to do this is to use the uninstall tool, if any, provided by the developers, or follow their instructions. If the software has been removed incompletely, you may redownload or reinstall even to finish the job.

  I never install modifications of the system myself, and except as stated in this comment, I do not know how to uninstall them. You'll have to do your own research to find this information.

  Here are some general guidelines to help you get started. Suppose you want to remove the so-called "BrickMyMac" (a hypothetical example). First of all, menu using the product, check if there is one, for instructions. Not finding here, look at the Web site, let's say www.brickmymac.com. (Maybe it's not the name real site, if necessary, search the Web for the name of the product). If you don't find anything on the Web site or in your search, contact the developer. While you are waiting for a response, download BrickMyMac.dmg and open it. There may be a request here as "Uninstall BrickMyMac." If this is not the case, open "BrickMyMac.pkg" and look for an uninstall button. The uninstall program can also accessible by clicking on the button customize, when one exists.

  Back up all data before making any changes.

  Generally, you will need to restart the computer in order to perform an uninstall. Until you do this, there may be no effect, or the unpredictable effects.

  If you can't remove the software in any other way, you will have to erase and install OS X. Never install any third party software, unless you're sure you know how to uninstall in the contrary case, it can create problems which are very difficult to solve.

  Try to remove the complex system of changes by hunting for files by name, often will not work and can make the problem worse. The same goes for 'utilities' as the 'AppCleaner"designed to remove software.

• I'm trying to understand the multiple-rendition articles.

  I am trying basically know how to design a cover photo that displays to 1536 x 2048 on an iPad 3 as well as in 768 x 1024 on an older iPad - and I wasn't able to do it again. You create just 2 photos - one at each resolution? If so, how control you it appears? Is it defined by the file structure?

  I have read several articles and it seems too confusing

  Thank you!

  -Mark

  What you're trying to do is not necessary or even supported. Given that the photo is just a background it is sampled at the size of your folio, and that's it. You can't put two different images of the cover in a folio.

  Neil

• Trying to understand the BREAK statement

  I am using the following code:
  

  SET SERVEROUTPUT ON VERIFY OFF 
  ACCEPT i_name PROMPT 'Enter your name: '
  DECLARE
       v_name VARCHAR2(30) := '&i_name';
  BEGIN
       dbms_output.put_line('This is right before the PAUSE.');
       PAUSE 'Adjust paper and press RETURN to continue.';
       dbms_output.put_line('Your name is: ' || v_name);
  END;
  /

  But I get these errors:
  

  ORA-06550: line 5, column 8:
  PLS-00103: Encountered the symbol "Adjust paper and press RETURN to continue."
  when expecting one of the following:
  := . ( @ % ;
  The symbol ":=" was substituted for "Adjust paper and press RETURN to
  continue." to continue.

  Am I allowed to use the BREAK statement in the PL/SQL block, or should it be before the DECLARE statement?
  
  If I am allowed to use it in the block, then why I get an error? I tried with and without the semicolon at the end of the BREAK statement.
  
  This site: http://download.oracle.com/docs/cd/A87860_01/doc/server.817/a82950/ch8.htm#1001319 it has the following example:
  

  SET PAUSE OFF
  PAUSE Adjust paper and press RETURN to continue.
  SELECT ...

  But why would disable you the break? And then when you turn it on? In addition, this example appears to conflict with the tips mentioned here: http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch12040.htm#i2699261
  
  Who says: "first, you must SET the text of the BREAK and then PUT on PAUSE if you want text to appear each time that SQL * more breaks."

  Am I allowed to use the BREAK statement in the PL/SQL block

  N °

  Break/accept/prompt SQL commands more and are unknown to the lanaguage of pl/sql.

• Trying to understand the baggage files

  If these questions don't make sense I apologize, but I don't really understand how luggage work files.

  I work with files of baggage in HR - 5. I have several projects with somewhere over 3000 files of luggage (for most PDF files). There are about 700 of them think I don't have anymore. I went through the projects and removed references to topics baggage files, I also deleted the files in the folder of hatracks. After the republication of the projects, the pdf files are still on the server. I have to manually delete the PDF files from the server? I do not remember to copy the PDF files on the server in the first place, HR did in the process of publication?

  If HR publishes the PDF files on the server, I can remove all PDFs from the server and HR would replace those who are still in the project? I don't have a list of the files that should be deleted, so if I could use this approach it save me a lot of time.

  Thanks for any help, it is always appreciated!

  Hello

  You should be sure by disabling the PDF Server and allowing the publication process to replace only those who are part of your project.

  As you met him, the publication process will never erase the files from the server. Everything you want to remove must be deleted manually.

  See you soon... Rick

  Start learning HTML RoboHelp 7 days - $24.95! Click here for Adobe Certified Captivate and RoboHelp HTML training Click here for the SorcerStone Blog Click here for RoboHelp and Captivate eBooks

• I'm trying to understand the terminology and underlying process

  I have a few question. I created three separate applications. One of the three acts as a navigation application, the user of their choice of the other two applications of staging. I know that everyone has their own jad/cod files. Are the files of cod also known under the name of the files 'library '? And I can 'merge' jad/COD files into a single file jad/cod, or what I have to install each application separately? Thank you for your time.

  Thanks to you all. I figured as well but wante to be sure. Thanks again.

  This stream can be closed.

• trying to understand the facilities side-by-side CF (CF9 and CF11)

  I'm testing my CF9 to CF11 upgrade on the same server.  Looks like my old CF9 is an installation of IIS standard, enterprise.  (if that makes sense to you)  My CF11 is a music and arts + secure and independent facility.  It seems that I choose stand-alone installation with internal web server, so it can centimetres between the two cold mergers and-by-side installation.  We want to use the internal web server anyway, so we can use the server Tomcat integrated instead of having to install a separate.  Now the question came, how to make all of my web pages that are in my current ColdFusion on IIS.  I discovered a document that addresses the management of Web server.  It seems that I can throw it now and he's going to set up my connection between IIS and ColdFusion.

  https://wikidocs.Adobe.com/wiki/display/coldfusionen/Web+server+management

  My question is, is it possible that CF9 is still up and running, then he would give me a CF11 ran instance to use the CF Web pages in order to test them and make them work.    Someone thought that IIS would not be able to determine what CF administrator to use.   Two CF applications cannot use IIS at the same time.  If so, how can I get the two systems by using my CF pages, so I can test if whatever it is broken and needs to be changed in the code, or try one of the new features in CF11 side-by-side?

  Thanks in advance!

  If you use a connector with 'all sites' configured, it will install this connector server-wide (in the server configuration, configuration of the not each individual site).  If you then attempt to plug the other connector on a specific site, it will result in a conflict between the server-config and site-config which will cause the site to not respond.

  The way to avoid this is to install a connector with the "all sites" option, so that each site can be configured with the connector inappropriate.

  -Carl V.

• Trying to understand the sidebar in the export of PDF document

  I exported my document of a book in PDF format, with interactive features included. The PDF document has a sidebar in nice with a list of some of my chapters. My question is, if I have no control over what appears in the sidebar? Is it possible for me to handle what that looks like, short of changing my content? Can I change what appears in the sidebar without laying the contents of my document?

  I ask because the sidebar does not include important elements of my Table of contents, the parts that might be useful for the determination of the people if they could see them.

  Sidebar? Are you talking in the Bookmarks panel?

  Bob

• understand the buffer behavior

  Hello

  I'm developing an application with c ++ which uses a voltage of anaolg entry. I develop with a simulated device usb-6210.

  on a slow computer, I get an error 200279 memory buffer for which I found lots of useful information already. I am trying to understand the behavior of the buffer by comparing a slow and a fast machine. Please see the following picture:

  

  I collect samples available in the buffer of each second with DAQmxGetReadAvailSampPerChan. the same exact version of my app works on both computers.

  my questions are:

  (a) how is it buffer behaving this way in the picture above? a 200279 never happens on the fast computer.

  (b) in the diagram below you can see the available samples accumulate while returning to zero every two seconds. Why is this, and can somehow avoid this?

  Thank you!

  Hi dan,.

  Thanks for you answer. Yes, I use continuous data acquisition and then I draw the data on the screen. I solved the crash on the slower computer by putting in place a ring buffer. I used to have a buffer that has been in constant growth, makes additional communal memory. the slower machine has less memory than the young, so I guess it is slowed down when less and less memory was freely available.

  I think the same thing would have happened on the fast computer, but it could take hours (4 times more memory), so I don't know about you.

  the tips in the above chart every 20 seconds remain a mystery but not so important.

  Welcome,

  mael15

• Trying to understand Orchestrator

  I am trying to understand more details about that Orchestrator is used for. I am very familiar with the scripts and I have many scripts powercli circulating regularly but I'm trying to understand the advantage of Orchestrator more simply to write my own scripts and other code end return. I guess what I'm looking for examples of what other people use Orchestrator for or things that Orchestrator can do that only scripts can not. I know it's a bit off topic, but any help is greatly appreciated.

  Hello!

  I recommend you watch the videos on http://www.vmwarelearning.com/orchestrator to see an introduction to the vCO.

  vCO provides a technical workflow engine, to perform automation tasks in a reliable "ready business" way:

  -Control points allows workflow to continue to operate even after a server crash

  -Scheduler included to run the workflow at a given time, every hour, every day...

  -Audit trail: who does this workflow when and with what result?

  -Integration: vCO Plugins allow workflows to integrate external systems which can be automated (via a special plugin existing for this product/system, the generic plugins for REST, SOAP, SMTP, SNMP, AMQP, SSH, SQL,... and you can even develop your own plugin!)

  -integrated workflow version control: you can see who changed the workflow, when and how (you can even jump to older versions if someone screw them)

  -built-in Web Client vSphere: you can run and monitor workflows directly from the web client

  -workflow can be interactive (for example for certifications)

  Common use cases are:

  -Automation of vCenter (obviously... you can do the same thing, as you can do in PowerCLI)

  -Integration vCloud Director to the rest of the world

  -Automate your COMPUTER processes that include both other systems (CMDB, ticketing system, monitoring,...)

  -support the admins of vSphere (want a workflow to instant callback? 5 minutes to create...)

  -workflow reports

  -orchestrate the upgrades and migration (there is a Plugin for VMware Update Manager, Auto-déployer...)

  -If you wish, you can even create your own personalized self-service workflows of vCO-based portal, vCO provides a powerful REST API itself. (However, VMware course offers some products out-of-the-box to do this, too)

  -Disaster recovery workflows (again, it is the out-of-the-box products, too)

  -management of laboratory workflows

  - ...

  - ...

  - ...

  See you soon,.

  Joerg

• Need help to understand the collection

  Hi all

  I'm trying to understand the concept of collection, but when I look in the documentation that exists in google.ca, then, it seems very confusing. If someone suggest me or send me some simple examples and good collection and I really appreciate it. Thanks in advance.

  Concerning

  Line

  Thanks for the explanation, could you please explain what does really to take care of the index as a whole and clause varchar2 and if yes then what condition we use varchar2 index and in which condition we use index as a whole, be we just use index by integer in our daily practice. Really appreciate your response. Thank you

  Generally if you use collections, especially PL/SQL-only collections, your architecture is probably wrong. Collections are rarely necessary, but are often USED in the mistaken belief that they will help performance.

  The use of the collections usually DEGRADES performance, sometimes severely, and they are often used in a way that is not scalable. You should avoid using collections if possible.

  So don't use the collections AT ALL in your 'common practice '.

  For the rare cases where there is to use an array associative index type to use depends on the data type of the element that you will use for the index. If you plan to use a string, then you use INDEX OF VARCHAR2. If you plan to use an integer, then you use INDEX BY PLS_INTEGER.

  What type of index to use has NOTHING to do with performance.

  One of the WORST mistakes developers make is to use an associative array as target of a BULK COLLECT INTO instead of using a TABLE IMBRIQUEE. Collection in bulk is more often used in a FORALL statement so that the elements are accessible only in the order. Useds "indexed" access with associative arrays isn't even necessary or used.

• Help! I don't understand the mechanics of the plot.

  Hi, I tried to understand the functioning of images in Flash.  I am new to ActionScript, so I don't know the inner workings of the language.  I tried to check the API but no Frame class is listed.  The closest thing is FrameLabel, and which was not useful.  I need to know a few things:

  (1) how do I know what I am?  If there is a class method, for this, what is the exact name?

  (2) how a framework?  I have a code with no timer, only listeners/event handlers, and I have an animation pirated without playing the clips on the line of working time.  The displayed pictures change every time I press an arrow key to move the character.  This isn't really what I want to do however, because I'm the visibility of the many different symbols of switching and update their position according to the original symbol of the player.  Very inefficient.  And does this mean that the frame ahead only when you press a button? Am I moving forward even the frame at all?  I don't know any method of advance structure.

  (3) how to work the frames on the time line?  I have all my symbols on a single image.  I did wrong in my constructor visibility because I don't want something to show when I first load the .swf file.  When I created a second image, everything went crazy and things began to appear.  This suggests that the visibility = false has been done only in the first picture?  What caused the framework change?  I really don't understand.

  Ideally, I would like to make an editable animation dynamically, because game actions will not be linear.  The player character will respond to the controls (which will change the animation) and it will meet the player (which will also change the animation).  I don't think I can do this without understanding management, so please help me.  I am very confused!  It would be cool for pointing me in the right direction as to where I can read about the details of the image.  I tried Adobe Tutorials, documentation, and support but it was not enough.  Is there a place where there is a very in depth explanation on the frames, or someone would be so kind as to taught me to their subject?

  Thanks in advance.

  Hello.

  Without layers. Inside the symbol Bob calle, go to frame 1 another symbol called state1 or how you want to name for the first condition. On frame 2 another symbol with its second State and so on. After that, you can call these States: bob.gotoAndStop (1), bob.gotoAndStop (2), etc.