tuned for startup applications

Similar Questions

• cRIO - creation and deployment of real-time independent startup application troubleshooting

  I use cRIO-9024 with a chassis 9112 for a control system. I use LV2011 SP1. When you run the system in development mode (by pressing the run button), everything seems to work properly. When the autonomous real-time construction and running in startup application, something stops working.

  In order to know if the application is running or not, I toggle the user LED on the cRIO using this code:

  

  When I turn off all the code in the main VI except this loop, the application deploys and runs at startup without problem (the LED flashes). I then add progressively more loops that I want to run (by disabling the code less and less), and the problem seems to be in the open FPGA VI reference block. If I disable this block, the slopes of autonomous real-time application (I guess the error 63195, handful of peripheral communication not valid, will spread along the line, but I know that the app works because the LED flashes).

  

  I tried several configurations for this block open FPGA VI and mixed results. For example, if I set it up this way:

  

  The application in real-time to start runs with the reference block opened VI FPGA active but work stoppages as soon as I turn on a code that makes use of this reference in the subVIs .

  Someone at - it an idea of what could go wrong? I have explored the messages thrown by cRIO at startup but can not see the error messages (in fact, the console output is the same when I managed to deploy an application that is running (by disabling the code). I also tried to explore the error logs (via right click on target Utilities > view error log) but cannot decrypt any useful info on their part.

  

  Any ideas will be greatly appreciated.

  Hi kkguner,

  My problem is that the code runs (apparently) ok in development mode, but it seems that, when it is deployed as a stand-alone application in real time, it does not at all. As I was not able to get messages through to watch the console output when restarting my cRIO or explore the Project Explorer error logs or error, I can only imagine what is happening.

  I feel that QFang suggestions go in the right direction, but I've yet to be able to determine the exact cause and the solution of the problem.

  The solution I set it with has been to deploy my application as a source with a start VI distribution instead of as a stand-alone application in real time. You can try this option.

  What I could try when I have some time is to clean my system from LV (whether in mass compilation or by reinstalling completely). I tried a massive compilation of vi.lib and I got a good amount of (UN) insanities, the wrong screws and several other unfortunate messages.

  kkguner, let us know what you discover in your inquiry, or if none of the suggestions solves your problem.

  Thank you QFang and xseadog for your help. Best regards!

  --

  Raúl

• Whenever I try to change the settings for startup from the Control Panel, a pop up tells me that I need to activate Windows Defender and open

  I installed Microsoft Security Essentials today and I'm trying to edit startup programs. Whenever I try to change the settings for startup from the Control Panel, a pop up tells me that I need to activate Windows Defender and open.  However, most of the security will not allow Windows Defender be turned on and I want to change the startup parameters.  How can I accomplish this?

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And now edit startup in Vista without using Defender programs, use one of the following methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Windows Vista 64-bit with readers that will not start after disabling all startup applications and registry changes

  My Vista 64-bit system ran like a dream - until I tried to install Roxio Creator 2010.  When the installation failed and hung up, I stopped the installation with the Task Manager and rebooted the pc.  Following the instructions of blog users of Roxio, I did the following:

  1. selected disable all startup using MSCONFIG and restarted the pc applications.

  2 download and run the Microsoft Windows Installer CleanUp.

  3 remove the partially installed Roxio files in the directory c:\Program Files x 86, then made an export of registry before editing the registry.

  4. under the leadership of the registry - deleted file folder HKEY_CURRENT_USER Software Roxio and has attempted to delete the Wow6432Node folder from the HKEY_LOCAL_MACHINE folder but encountered an error - didn't note it, unfortunately, but basically he said that he could not remove it when it has been changed, after waiting a while I tried to delete the folder Wow6432Node whe even once with the same answer, so I closed Regedit and restarted the pc.

  The pc goes through the process of startup and hangs when it tries to start Windows Vista.

  5. I can't do a repair with the Vista disk - files are not present.

  Hello Ajay K.

  Thank you very much for your detailed answer.

  I got no error message.  I backed up the registry, but was not able to start the pc, so was not able to restore the registry.

  I couldn't restore last good configuration known - the option was not yet present.

  When I tried to restore the operating system, he asked drivers before it would proceed.

  I have a floppy 1.44 with the raid drivers and after reloading of these drivers, I was able to reload Vista Ultimate.  Fortunately, all my data was recorded in a windows.old directory, and I'm back in business without losses.  Just had to reload all my software.  Do that...

  I think that my problem was caused by disabling all startup applications in msconfig - which resulted in my hard not recognized disk array.  This seems likely.

  You are awesome to provide an exceptional response.

• How to change the boot order for the applications to the taskbar?

  When I moved to W7, software of my trackball wouldn't work and Kensington wouldn't fix, so I moved to a conventional mouse. I recently bought a better mouse and it has its own software. The software works very well, the problem is that it starts towards the end of the boot sequence. I would like to start earlier. The problem is that all the research I've done changing the order of departure come back with how to change the order of display in the taskbar.

  How can I change the boot order for the applications to the taskbar for the software for the mouse, boots earlier in the list?

  Windows does not have native to adjust the boot order, but there are third party solutions. See

  http://www.howtogeek.com/52043/how-to-control-the-order-of-startup-programs-in-Windows/

• I can't access desktop applications after I bought a subscription for all applications

  I couldn't access my applications to my office after I bought a subscription.  I ended up cancelling my credit card because there was no other suggestion given.

  I never received an email confirming my membership, but that they took my credit card payment.  A little annoyed when I couldn't use the software I had of course already started paying for.

  CAT

  Your file number: 0216579172 Bo Quinn

  Here's what we know about your problem so far. It relates to:

  Creative cloud change

  Membership, account, payment change

  Payments, invoices, orders change

  Thank you for your patience.

  In the meantime, you can try our community forums where experts are available 24 hours a day, 7 days a week

  Now you can talk with Naveen.

  18:07:47

  Native:

  
  

  Hello. Welcome to Adobe customer service.

  18:07:53

  Native:

  
  

  I'll be happy to help you with your problem today.

  18:07:58

  Bo Quinn:

  
  
  Thank you

  18:10:50

  Bo Quinn:

  
  
  I bought a monthly payment of $49.95 annual membership for all applications. My first payment came out of my bank account, but I have received no email for me with any serial number as such. I can access everything, but can not download applications on the computer that my profile has always said that I am on a free membership? Should I cancel my membership by stopping payments on my credit card?

  18:10:57

  Native:

  
  
  Could you wait 2-3 minutes while I research about this?

  18:11:03

  Bo Quinn:

  
  
  Yes thank you

  18:11:13

  Bo Quinn:

  
  
  Your file has been successfully downloaded: Screen Shot 2015-09-20 at 2.35.18 pm.png.

  18:11:26

  Bo Quinn:

  
  
  It was the first payment, which is out of my credit card

  18:14:18

  Native:

  
  

  AS you use composition creative cloud, you need to transfer the chat to our Department of CCM and they will help you with. Please stay tuned.

  18:14:26

  Bo Quinn:

  
  
  Thank you

  Please wait, we connect to a representative.

  Now you can chat with river.

  18:14:56

  Bo Quinn:

  
  
  Thank you

  18:14:56

  River:

  
  
  Hello! Welcome to the Adobe Customer Service.

  18:15

  River:

  
  
  Hello

  18:15:04

  River:

  
  
  You are welcome.

  18:15:07

  Bo Quinn:

  
  
  Hello

  18:15:34

  River:

  
  
  I understand your subscription showing the trial message

  18:16:14

  Bo Quinn:

  
  
  Yes, it's still show that I am on a free membership, even if I signed up for a years subscription pay $ 49.95 per month

  18:16:22

  Bo Quinn:

  
  

  Your file has been successfully downloaded: Screen Shot 2015-09-20 at 2.35.18 pm.png.

  18:16:25

  River:

  
  
  Alright!

  18:16:41

  River:

  
  
  I would like to see how much better I can help you with this problem

  18:17:09

  Bo Quinn:

  
  
  This file is a screenshot of the first payment, which was removed from my credit card, but I never received any email from welcome to adobe saying that everything has been accepted?

  18:17:13

  Bo Quinn:

  
  
  Thank you

  18:17:17

  River:

  
  
  I see that there is no active subscription with [email protected] e-mail address

  18:17:34

  Bo Quinn:

  
  
  Yes I noticed that too.

  18:17:59

  River:

  
  

  Could you please confirm you have all other e-mail addresses that you have?

  18:18:08

  Bo Quinn:

  
  

  I have a second email with adobe which I think could have accepted it but he also says free trial - [email protected]

  18:18:57

  River:

  
  
  Thanks for the email address

  18:19:03

  Bo Quinn:

  
  
  No problem

  18:19:09

  River:

  
  
  Let me check

  18:21:03

  River:

  
  
  I see that there is no active subscription with [email protected] also

  18:21:27

  Bo Quinn:

  
  
  Yes very weird.

  18:21:31

  River:

  
  
  Could you please provide me with the possible all email addresses you have?

  18:21:42

  Bo Quinn:

  
  

  they are the only two I have

  18:22:56

  Bo Quinn:

  
  
  should I get my Bank to cancel the subscription? The only problem is that they put a block on adobe to access my credit card?

  18:24:04

  River:

  
  
  I understand your concern!

  18:24:08

  River:

  
  
  Yes, please!

  18:24:13

  Bo Quinn:

  
  
  Thank you

  18:24:22

  River:

  
  
  Please contact your bank

  18:24:26

  River:

  
  
  You are welcome.

  18:24:28

  Bo Quinn:

  
  
  will do

  18:24:31

  Bo Quinn:

  
  
  Thank you

  18:24:38

  River:

  
  

  Thank you!

  18:24:44

  River:

  
  
  It's the pleasure to help you today!

  18:24:44

  River:

  
  
  Have a great day and take care!

  18:24:46

  River:

  
  
  Please contact Adobe.  We are available 7 days a week, 24 hours a day. Good bye!

  You will receive your chat transcript at [email protected] at the end of your cat.

  You have finished this chat session. Please contact Adobe.

  Please check "PRIVATE MESSAGE '. '"

  Concerning

  Megha Rawat

• Why do I receive alerts in iPhone mirror on my watch for an application for which I turned off mirroring alerts iPhone?

  Why do I receive alerts in iPhone mirror on my watch for an application for which I turned off mirroring alerts iPhone?

  Watch OS 3.0

  iOS 10.0.1

  

  Hello

  You should find that restart both devices solves this problem.

  The two put together, and then restart your iPhone first:

  • Restart your iPhone, iPad or iPod touch - Apple Support
  • Restart your Apple Watch - Apple Support

• One volume for all applications

  Is there a way to define the Air iPad for a volume for all applications?  When I go into the music and YouTube, it seems
  always change and increase the volume.

  Thanks in advance.

  Hello. In fact change such volume indicated by the slider in the control center? Swipe up then left to see. I think that maybe it's just that the music is stronger, more deeply modulated. Not much you can do about it.

• If I have the first generation iWatch I'll be able to get the update for new applications and look at faces?  I know that I couldn't display or the waterproof function to the water.

  If I have the first generation iWatch I'll be able to get the update for new applications and look at faces?  I know that I couldn't display or the waterproof function to the water.

  Hello

  The next operating system update, watch OS 3, will be available for all Apple Watch models, including the first generation watches.

  We should go out on 13 September, after which it can be installed by following the steps detailed here:

  • Update the software on your Apple Watch - Apple Support

  More information:

  http://www.Apple.com/Watchos/

• I was charged for an application that was not mean to buy how I get my money back?

  I was charged for an application that was not mean to buy how I get my money back?

  Purchases are considered final, but you can try the page 'report a problem' to contact iTunes Support and see if they will refund or credit you: http://reportaproblem.apple.com

  Or you can try to contact iTunes Support via: https://support.apple.com/contact or https://www.apple.com/emea/support/itunes/contact.html

• I can't Turn off cellular data for any application.

  I have iphone 6 s more than 128 GB with the latest IOS 9.3.3. I'm not able to cellular data turn-off for any application. When I turn on my cellular data, all applications work with cellular data. Data on each app switch is turned off and I'm not able to cellular data turn-off for any application.

  Try to check your restrictions under settings > general > Restrictions.

• If I pay for an application and it does not work I would get my money back guarantee, please, thank you

  If I pay for an application and it does not work I would get my money back guarantee, please, thank you

  This is a user to user forum. You don't talk to Apple.

  You can report a problem with applications to http://reportaproblem.apple.com and request a refund as well.

• Apple has taken $16.63 my account for an application called Kings of Pirate and I do not have the game on my phone.

  Apple has taken $16.63 my account for an application called Pirate Kings. The problem is I don't have the game on my phone and I've never played the game at all. I recived an email with the front desk saying that I bought a few different things to the game at 6 in the morning on 07/11/2017 and to whom I was sound asleep. I don't think it's just that I want my money that I never brought anything off here

  < re-titled by host >

  Take a look at for help with an item purchased from the iTunes Store, App Store, Mac App Store and iBooks Store - Apple Support and also consider changing your passwords as well: change your Apple ID - Apple Support password

• This computer is no longer allowed for the applications installed on your iPhone

  I tried to sync my iPhone 6 more with iTunes in my MacBook Pro.  During this process, a window popped up that says, "this computer is no longer allowed for the applications that are installed on the iPhone" iPhone 6 more "." You want to allow this computer to items purchased from the iTunes Store? »

  I clicked on allow and another window popped up that says, "Enter Apple ID and password.  If you have an Apple ID and password. Enter them here. "(If you use the iTunes Store or iCloud, for example, you have an Apple ID.)  "You can authorize up to 5 computers for each Apple ID."

  Apple has recently replaced the logic board on my MacBookPro (early 2011).

  There are 3 iCloud Apple ID.  First of all, I allowed my MacBook Pro.  Then he asks the password of the Apple ID for my iPhone 4.  While I was still with my iPhone 4, there was a problem and Apple technology had me install a new Apple ID.    Then I was asked for passwords for the Apple ID for iPhone iPad Air and 6 more.  Then another pop-up window says, "the authorization of the computer succeeded."  "You have allowed 5 computers on your 5 available."

  This could be 5 'computers' if Apple still has the original map of the logic.  It is always 1 MacBook Pro, which has a new logic board and if I called the Apple Support, I guess the UUID hardware is Apple going to buy and I did that for this new logic board, but not for the old.  I would have thought when the old logic board has been subscribed by technology, he or she would have known in order to erase the original UUID for my MacBook Pro in the main Apple system and replaced it with the new.  BTW, the old logic board works great.  It was the video card that was bad and my computer has a problem to wake from sleep or boot.  Everything worked very well when I took it for repair, so technology might have gotten the UUID of the old logic board.  Since I'm not a computer tech, I'm probably missing something.  I don't understand why I had to do it all.

  So, how can I get this problem fixed then the old logic board is not counted?

  Thanks in advance!

  Note: where it is said to 'Select a category', 'importing & Burning in iTunes', was the closest I could come to picking a category.  If I posted this in the wrong place, please move to the community right and made me know.  Thank you!

  You need not do anything.

  If, in the future, you need a permit for a new computer, then just reauthorize all, then allow all of your active computers.

• How can I change the privileges of sharing and permission for certain applications and software?

  I need to change the permissions and settings for sharing applications. I find the custom preferences not defined by myself as well as many of those who are don't give me "read and write" access for them. When I go to "get info" to change these settings, it says I don't have permission to make changes. How can I solve this problem and make sure that it doesn't happen?

  Nothing should write an application, so I don't know why there is a problem.

  Protection of the integrity of system (SIP) in El Capitan prevents you from changing all the apps.

  For preinstalled applications, the system must have a reading and writing and group / everyone should be read-only.

  They will also have an access control entry, "group: everyone denies delete" which will appear as usual in the window read the information.

  Install apps via drag and drop, you will probably have as owner with Read and Write, but the other group is going to be read-only.