Tungsten E2 two questions: alert fatal & import data

Similar Questions

• You can import data field twice - need two of each person

  I'm a member of a club card. They want two cards by excellent field. So, if the line is John Smith, I need 2 cards with the news of John Smith, Jane Doe 2 and so on. I have 119 names and eventually need 238 merged fields. And before you tell me two print side up, it goes to a specialized card printer and they specified a file with 238 merged cards. Any advice appreciated on getting the data merge to do two of each row of data (name, your member number, active/inactive member). Thank you.

  Make sure you have facing pages not controlled in the document format.

• Re: Two questions on the recovery of my Satellite C850 / 09L

  Hello

  I had an unfortunate accident with a drink and my C850 / 09L while in the hospital, and while he was cleaning that I used my external hard drive on an old computer.

  Long story short, while making the usable drive I have in some way managed to make the unreadable UEFI and need a recovery disk to fix it (which I did not cause of course I was in the hospital when the laptop was given to me).

  I have two questions:

  (1) the recovery disk creator organize files in a specific way, or can I copy the whole partition on a USB flash drive and make it work?

  and

  (2) if I am able to use the recovery partition copied or obliged to buy a Toshiba drive, the recovery disk difficulty will be just the OS or it will wipe my files as well?

  1 / recovery disc Creator create a special bootable media that can be used for the installation of laptop recovery image. If you want to install the recovery image, you MUST create this bootable media.

  2 / Yes Yes please before you use it to backup all your important data.

  If you have any other questions you are welcome.

• Script to import data

  HII All
  I want to run the import of all the s data with the help of the script file
  I have several s datafile with different users and I want to run import db
  Please help me how to write a script.
  
  Thanking you

  GaurAVS,

  I don't know what were the reaosns which makes you selected this option, question did you try to use other options to move the data from the source to destination. Two questions for you?

  1. a single export dump for each user schema or is - this more than one file?
  2. I guess from your previous post, you got more than 50 users to your database schema?

  Here's the simple bash script, assuming that you have a dump file to export for each user in the schema. Create a data call directory and move all dump files, read the script carefully for instructions and modify according to your needs.
  In addition, before you run this script on GNU / linux run after the command prompt

  $dos2unix import.sh

  #!/bin/bash
  
  function importfile
  {
       echo "importing $file for user $1"
       imp $1/$2 full=y file=$file log=./data/`basename $file dmp`log
       test=$?
       if [ $test -ne 0 ]
       then
              echo "Importing for user $1 failed ..."
           exit 1;
       fi
  }
  
  function listfile
  {
      # you have to supply username and password here
         for file in ./data/*.dmp
         do
           echo "exporting $file for $1"
           # If you used username as filename for each export dump
            unset username
            +username=`basename $file .dmp`
            echo "Username is set to $username"
  
            # Now to get password for this username ; you can create a file with
            # this format username=password
            # $1 -- Username
            # $2 -- Password
            #
            unset pw
            pw=`cat ./data/pwd.txt.txt|grep $username|cut -d'=' -f2`
            echo "Password is set to $pw"
            # You have to write a small function to get username and password
  
            importfile $username $pw
             done
  }
  
  listfile $1 $2
  

  Published by: OrionNet on December 20, 2008 23:47

• I lost Fox reminder... a lot of important dates etc... how I get it back

  Lost reminder Fox of Firefox. This has had a lot of important dates. Can I get it back. Something is displayed in the files when I search on the computer, but I can't understand how to try to add to the profile. It also doesn't let me read it because windows does not know how to open it. I tried the 'copying files between profile folders' but he won't let me not make right click in the profile to stick for some reason any

  Hi there... not the extension did not show anywhere in Firefox, although I could find a few mentions 'reminderfox' looking for windows.

  This was driving me crazy in the morning and half in the afternoon (I'm one of those who does not like to be beaten... especially by the computer). So now I have solved my problem.

  What I did to reinstall reminderfox, then, after further research, I've been just "reminderfox.ics.bak3" (assuming it was the backup) in the icon on the status bar and voila! It worked.

  Thanks a lot for picking up on my question

• Two questions with Satellite A200 (PSAE3E)

  Hay
  When I turn on my laptop and then it starts too slow and some time when I stop my book awhile it doesn t stop. Then I take my battery on and then it stop.
  How to solve this problem.

  Windows Update also not installing when I use the connection to the local network and dial-up, I'm working.

  My laptop is
  Satellite A200 (PSAE3E)

  Hello

  First of all, it would be interesting to know if you have already tried to reinstall the operating system on this laptop.
  I want to say that these two issues could be related to software problems

  The windows OS should receive and install Microsoft update without worries, and if this is not possible a software problem is possible.

  I put t know if some important system files are confusing upward or if a register issues causes bother but I m sure that Vista should receive patches and updates correctly after reinstalling again.

  Therefore, it would be desirable to test this! Before you start the recovery procedure to backup your important data!

  Good luck

• Two questions about SP1 and Vista startup

  Hi all
  two questions:

  (1) I understand that if I want SP1 on my machine, I have to install manually, because it is not included in the automatic update routines?

  (2) my machine failed yesterday, I received a message "unable to start Windows. A recent hardware of software change might be the cause. "The only thing I can think is that before turning off the previous time, I inserted a USB hard drive to copy the files on it. But I continued to work normally on the machine. Another unusual event, it is the day before, it was very slow to start, so afer it finished start, I restarted.

  When the system could not start, I tried several times, automatic procedures that always ended with "windows cannot resolve the issue automatically,
  Contact your service provider. In the last attack, I also clicked on a 'Advanced tab' and restored the system, but it does not solve the problem. Then, this morning I turned on the machine again to write the exact error I have, and message instead, unexpectedly (and rather willingly), the machine starts normally. So, what could happen? Should I get my machine (which is less than one month) verified?
  Thank you!

  Paola

  Hi polla.

  (1) Yes, Yes. You must download and install SP1 manually.

  (2) No, I'm Don t think that you should check. I would say: work with it and if the error appears, back up all your data and restore complete your system, so you can exclude any type of software problem...

  Welcome them

• two questions about the scattered images secure

  I created an image that is secure and encrypted for sensitive documents.

  I have two questions:

  1. when I use the disk (if it is up, open and available), and I want to add something to it, I usually drag the file everywhere where it is currently in its destination folder in the sparse image control.  But it automatically makes a copy - with the same name (not with a '-1' ever, not with a suffix 'copying' or 'alias').  Which defeats the purpose and makes things complicated - I find myself comparing what is in each location to make sure it's in the sparse image and then it makes me nervous to delete the original.  Why it does this and how can I change such as dragging a file in a secure location gives there is not that a second copy of it left in an UNsecure location?

  2. I'm using Time Machine backup drive sitting on my desk (and a separate utility for monthly clones on a different backup disk).  Automatically makes Time Machine backup the content of the rare picture even if the safe drive is not mounted, open and available?  I hope not, because that would undermine the usefulness of having a backup disk on my desktop running of ordinary Time Machine backups, but find it me just that all the steps I take of course I do not lose any data may be so overprotective I have thought/hoped.

  Sous_forme_d' addendum, I'll check my clone, but as I put this out there, I wonder if SuperDuper!, my application of cloning is cloning automatically secure disk content, so... like the thoughts of anyone about it if it's an application that they use).

  FYI: I'm running 10.11.2

  Thank you.

  (1) by default, OS X makes a copy with the overcoming of the limits of volume and moves when in the same volume.

  You can reverse this behavior by holding down the command key when you drop. You will see the insignia of the icon changes (green + for copy, empty for move).

  (2) Time Machine will return to the top of the image 'file', but only when it is unmounted. I do not think that it automatically includes the volume mounted, but I would like to check and add to the exclusion list.

• Two questions with Equium P200-178

  Hi all

  I've owned my faithful * P200-178 * (PSPB2E-001002AV) for a few years now with no problems until recently. It has windows vista Home premium installed.

  First of all the built-in wireless (PA3613U-1MPC) stopped working after that a "friend" he fell! The switch works ok, but the light no longer works. I reinstalled the driver and it did make a difference. A message appears saying that the wireless adapter was not installed during the installation of the software. I even tried a model from the same wireless adapter and it does not work. What is strange, it is when you use free configuration that he knows that the switch is either on or off, but can't find the adapter. The Device Manager also can not find.

  Second, after that my children has uploaded an image to their homework the notebook had a nervous breakdown! I have all the latest antivirus software and check the system on a regular basis. The image has been printed and has now been removed. I used to put the laptop and turn it off with the power switch and not by windows, stop facilities. This no longer works. After lifting the lid, press the power button / nothing happens. However pressing the icon of music "in a box with 6 Sparks coming from it" (sorry for the pathetic description) the portable lights. Windows Vitsa appears and first seems to be ok. During boot a message saying:

  Checking file system on \\?volume {ef *-long serial number not shown in the case its unique-806 *}
  The type of file system is NTFS.
  volume label is winRE.

  One of the drives should be checked for consistency. You
  may cancel the disk check, but it is strongly recommended
  that you continue
  Windows will now check the disk.

  CHKDSK checks the files (etc, etc, etc.)

  File segment 24,25,26 and 27 are unreadable, are repaired (I think that the info is too fast to read) and possibly boots. The laptop restarts now, too.

  WHAT CAN I DO IF ANYTHING TO SOLVE THESE PROBLEMS / QUESTIONS?

  Thanks in advance

  Hello

  In my opinion in the first case, there must be some physical damage and I do not think there is something you can do to fix it. I guess that laptop must be disassembled and port/switch WLAN must be controlled by technicians.

  About second question I can not say much, but in my opinion you should back up all your important data and reinstall the OS using recovery media delivered. With clean OS preinstalled, you can test the WLAN functionality again and the functionality of the power button.

  I know that this is a more radical method, but do what you will be able to test the functionality of the laptop with the State factory and without some strange files or entries in OS preinstalled.

  What do you think of all this?

• Two questions in table "While loop"

  Hello

  I have two questions about creating tables in while loops. I'm using LabView 8.5.1.

  In its simplest form, my current while loop (delay set to 0, 2 s) has 3 variables that have been changed by moving a slider. They are each sent to a line in a block of 'Building the table' (data type is DBL 1 d) - this table is then written to a spreadsheet file, such as the three values are written to a new line (one value per column) whenever the while loop runs.

  Question 1

  How can I add a column 'Time' in this worksheet? In other words, get at the present time the loop works since then, from 0 seconds in the spreadsheet, via the table block building.

  I can think of how to do this with a loop For, but given that the While loop runs through an unknown number of iterations, I can't figure out how to get the counter to work.

  Question 2

  How can I text column headings on the worksheet?

  Thanks for the help and if you need anything anyone stating, please let me know

  To answer question 1:

  There is a function of 'Elapsed Time' you can put as the first colum of the data.

  This then reformatted your spreadsheet as
  Time Data1 Data2 Data3

  Time Data1 Data2 Data3

  Time Data1 Data2 Data3

  etc...

  

  To answer question 2:

  Build a table of positions, then write this table in the file only once, outside the loop.

  Your table with the data and time will write inside the loop.

  

• Custom menu item at the request of Message: two questions

  I try to add a custom menu to the Blackberry message request and get two questions:

  1. When you click the custom menu, the "Application.getApplication () .requestForeground (); method call does not call the main() method of my application "DemoMI".
  2. If I changed the method of

  Application.getApplication () .requestForeground)

  TO

  ApplicationManager.getApplicationManager () .runApplication (app); Where app is the "DemoMI" application descriptor

  Will be called the main() method. However, how can I make the subject of the Message around in the method "run" for the application "com.demo.DemoApp"?  I tried to use a static variable 'mi ContactsDemoMenuItem', but I've always had "null" value when the "main()" is called.

  My environment:

  • JDE: 4.2.0
  • Feature: Pearl 8100 with OS 4.2.0

  import net.rim.device.api.system.*;
  import net.rim.device.api.ui.component.Dialog.*;
  import net.rim.blackberry.api.menuitem.*;
  import net.rim.blackberry.api.pdap.*;
  import javax.microedition.pim.*;
  import net.rim.blackberry.api.mail.Message;
  import net.rim.device.api.ui.UiApplication;
  import net.rim.device.api.ui.*;
  import net.rim.device.api.ui.component.*;
  import net.rim.device.api.ui.container.*;
  
  public final class DemoMI extends Application
  {
      private static final String ARG_LAUNCH_CONTACT_DEMO = "1";
      private static  ContactsDemoMenuItem mi;
      public static void main(String[] args)
      {
          if(args == null || args.length == 0)
          {
              DemoMI app = new DemoMI();
              app.enterEventDispatcher();
          }else
          {
              String appToLaunch = args[0];
              if(ARG_LAUNCH_CONTACT_DEMO.equals(appToLaunch))
              {
                 new com.demo.DemoApp(mi.getMessage()).enterEventDispatcher();
              }
          }
      }
  
      DemoMI()
      {
          long locationToAddMenuItem = ApplicationMenuItemRepository.MENUITEM_EMAIL_VIEW ;
          ApplicationMenuItemRepository amir = ApplicationMenuItemRepository.getInstance();
          ApplicationDescriptor app = ApplicationDescriptor.currentApplicationDescriptor();
  
          app = new ApplicationDescriptor(app, new String[]{ARG_LAUNCH_CONTACT_DEMO});
          mi = new ContactsDemoMenuItem(app);
          amir.addMenuItem(locationToAddMenuItem, mi);
          System.exit(0);
      }
  
      private static class ContactsDemoMenuItem extends ApplicationMenuItem
      {
          ApplicationDescriptor app;
          Message msg;
          ContactsDemoMenuItem(ApplicationDescriptor app)
          {
              super(20);
              this.app = app;
          }
  
          public String toString()
          {
              return "My Menu Item";
          }
  
          public Message getMessage()
          {
              return msg;
          }      
  
          public Object run(Object context)
          {
              if ( context instanceof Message )
              {
                  msg = (Message)context;
                  try
                  {
  
                      Application.getApplication.requestForeground();
                      //ApplicationManager.getApplicationManager().runApplication(app);
                  }catch(Exception e)
                  {
                      e.printStackTrace();
                  }
  
               } else
               {
                  throw new IllegalStateException( "Context is null, expected a Contact instance");
               }
               return null;
          }
      }
  }
  

  What you see is the expected behavior.  The ApplicationMenuItem runs in a different process where your application was run.  You have two options.

  You can store the subject of the Message in the RuntimeStore when the ApplicationMenuItem is called.  Your application you are undertaking could then read the subject of the Message of the RuntimeStore.

  Or you can create an application based on the drawing below:

  How to allow - a listener in the background to detect and update a GUI application
  Article number: DB-00406

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800783/How_To _...

• How to join two tables to retrieve the data from the columns in table two. Tables have primary and foreign key relationships

  Hello

  I want to join the two tables to retrieve the data from the columns of the two table passing parameters to the join query. Tables have primary and foreign key relationships

  Details of the table

  Alert-1 - AlertCode (FK), AlerID (PK)

  2 AlertCode-AlertDefinition-(PK)

  Help, please

  
  

  ----------
  

  Hi Vincent,.

  I think that you have not worked on adf 12.1.3.  In adf 12.1.3 you don't have to explicitly create the association. When you create the EO to your table, Association xxxxFkAssoc, will be created by ADF12.1.3 for you automatically. Please try this and do not answer anything... You can also follow the links below. I solved the problem by using the following link

  Oracle ADF Guide step by step - Oracle ADF tutorial: creating a relationship of the master / detail using Oracle ADF

  ---

• Importing data into a custom using API object in bulk

  Hello

  I try to import data in Eloqua.

  The data are so simple that a list of email addresses - I just want to be able to place them in a specific ORDER so that I can reference this when selecting my contacts.

  I could create the object custom Eloqua.com without problems.

  I could define an import against the custom using the API object in bulk (v2.0) once again without problems.

  I was able to synchronize these data so that it appears in documents in the object custom without problems.

  The problem is with mapping - this is not the case.

  When I create the custom object, I choose 'add the contact fields' then 'e-mail address '. I tried the field configuration in the field display name, unique code, e-mail address, domain group. I have ensured that "Default Entity Mapping used in upload" indicates the type of entity such as contacts and the field of the entity as a "'email '.

  In 'Map of the fields', under the heading contact I am not available "" e-mail address"option, then the field says"(none) ". What is the problem? I thought it might be, but tried to create a custom object where the field was a customer id (which is also held against contact) and despite matching that in the menu 'mapping', it still doesn't have the card.

  When I set the import, I base it on the field that appears in the API

  In this case:

  {u 'hasNotNullConstraint': u 'internalName False': u 'Email_Address1', u 'name': 'u' Email address, u 'dataType': ' u 'emailAddress, u' hasReadOnlyConstraint ": False, u 'uri': u ' / customObjects, 265, fields, 916 ', u' statement': u'{{Objetpersonnalise [265].}}" "} {Field [916]}} ", u" hasUniquenessConstraint ": True}

  So my export definition looks like:

  {'name': 'Test', 'fields': {'Email_Address1': ' {{Objetpersonnalise [265].}} "}} Field[916]}}"},"identifierFieldName":"Email_Address1","isSyncTriggeredOnImport":false,"dataRetentionDuration":"P7D","isUpdatingMultipleMatchedRecords":true,"uri":"/customObjects/265/imports/17","createdBy":"Stephen.Waters","createdAt":"2015-04-28T17:52:18.8247543Z","updatedBy":"Stephen.Waters","updatedAt":"2015-04-28T17:52:18.8247543Z"}

  I said "isUpdatingMultipleMatchedRecords": true in the hope that this could help, but it didn't.

  According to some old posts here, I had been concerned that the e-mail address field should look more at {{Objetpersonnalise [265].}} Contact.Field (C_EmailAddress)}} - so far I found no way to be customized to create a field that corresponds to that, they always follow the format {{Objetpersonnalise [#]. Field [#]}}.

  The synchronization works, but under Setup: integration: entrants: all source data: System: in bulk api if I look at the 'source download history', it says the following under parameters:

  Set of data Test State of the downloaded data cards Registered Overwrite the status of existing data cards NO. Data map ReadOnly NO. Map data cards NO.

  How can I make this field "map data cards" say 'yes '?

  Everything works very well & cards with a download of the manual the data card (where I can specify to map the maps on the last page)... it's just I make tons of them and need a more automated solution.

  Any advice appreciated, thanks

  
  Stephen

  Definition, but it adds in addition to {{Objetpersonnalise [265].}} Field [916]}}.  When you create the record fill in the two fields: 1 is a field in the custom object that you created, the other is used to map to a contact.

• Import data from microsoft great Adobe acrobat XI

  Hello

  I am referring to an object of the adobe support page. German Version can be found here. A quote from the site are under discussion.

  I want to import data from an excel sheet in adobe pdf format. I created some forms that have the same names as the columns (to be more precise: the first line) in the excel worksheet. How I export data from excel?

  I exported the "tab-separated-Tex", but I found an error in adobe saying that the txt could not be imported. Can someone tell me how to export the data correctly?

  Is there another way?

  Thank you very much! Questions or remarks are welcome!

  Edit1: I would appreciate a person displaying a file "adobe acrobat" forms a txt for example. That make you much easier, if all goes well. Thank you!

  Import form data

  In some stream work, particular scenarios present filled with forms as data only files and not as a complete PDF files. These files are not PDFs, but use a different format, such as FDF or XML. You can view the data provided by an individual recipient in the context of the PDF by opening the original file and importing the information contained in the data file.

  1. In Acrobat, open the PDF form in which you want to import data.
  2. Choose Tools > forms > clear form.
     Note: When you import data from another file into a PDF form, the imported data will replace any information that was previously included in individual form fields. However, if the imported data file contains one or more blank form fields, the import does not clear the original data.

  3. Choose Tools > forms > more form Options > manage form data > import data.
  4. In the Select file containing Form Data dialog, select a format in the file of Type corresponding to the data file to import. Locate and select the file, and then click Open.
     Note: Some formats are only available for specific types of PDF forms, depending on the application used to create the form, like Acrobat or Designer ES2. Data you're importing a text (.txt) file must be formatted in rows, delimited by tabs that form columns.

  I think it would be better for you to put a blank form and a sample data file so that we can test it and check why it does not work.

• Two questions about the controller of the exporter

  Hi guys,.

  I have two questions on the controller of the exporter.

  1. as the controller of the exporter uses its own user interface, is it possible to generate new files pre-defined in the controller of the exporter to represent its user interface is happy?

  2. how the Ftp settings are stored in the preset currently file? I want to change in my own exporting contronller rather than first UI.

  It will be very appreciated if someone could answer these questions.

  Thank you.

  Hi Alex,

  (1) there is no API to create/modify the presets of the exporter, but as you can see, the .epr file is XML and quite easy to debone in most regions.

  (2) Oh, I forgot this FTP settings checkbox save.  Good fishing!   Yes, the binary data in the .epr are encoded in base64.  The last time I checked (there are several versions), Premiere Pro checksum function is a CRC 32 bit with a polynomial of 0xEDB88320L.  It is not guaranteed to remain the same from one version to the other.