Turn off the free transform on objects

Similar Questions

• Citing the free transform on the smart object place encompassing top left

  I've got something weird going on in PS CC 2015. It runs on a computer Windows 10. I placed a psd file of a company in the active document logo. I shot it, scaled and added some layer styles. Then at some point I had to resize it again, so I called the free transform command, but now the framework encompassing loads in the upper left corner of the document. Any changes to one of the settings in the Panel Options F. T. causes the logo to disappear completely, even if I can go back to the default values. This occurs only after I added a mask to the layer. Without the mask, everything works fine - add the mask, and I get this oddity.

  No idea why?

  

  the dynamic linked object should update its content

  window-> properties: update of content

  something more I would say... Double-click on the smart object and use the crop inside tool

  

• Cannot deform stuck HAVE dynamic object using the free transform vector in PS CS6

  Hello

  I stuck a vector object in PS CS6 (13.0.1 x 32) today directly from Illustrator CS6 (16.0.1 x 32) and select 'Paste as smart object' (Windows XP Pro SP3).

  I then tried to distort the object glued using the free transform tool by dragging one of the handles to angle with hold CTRL (Windows).

  General warps\distorts the object, but instead, it launched an operation to bias .

  If I paste as Pixels or shape layer and then apply free Transform, < Ctrl + corner handle slide > performs a warp\distort operation.

  Also, if I have rasterized glued it opposed and then convert them to a smart object, I can warp\distort.

  Is it not possible to paste a vector Illustrator in as a smart object, then warp\distort directly using this technique?

  Thanks for your help.

  Richard

  Your right because on a stuck vehicle a smart cannot deform, false or perform perspective transformations.

  One solution would be to right click on the vector smart object layer in the layers panel and

  Choose Convert to smart object.

  It depends on what is your object, you would probably better quality of a pasted shape or path, but then you will not be able to open the object

  back in illustrator from photoshop.

• Unable to open encrypted drive up to that "turn off the csrutil.

  I was using OSX 8.5 until a few days ago. One of my discs is encrypted. For some reason I couldn't open it for a long time. A day after a reboot, the system refused to open it (I just restart my Mac Book every now and then). I tried several combinations of the password, nothing helps. It was not so important, because the disk contained only the old data.

  Two days ago, I have updated to OS x 11.5 and gave him a new trial, nothing had changed.

  However, today, I needed to disable the security protection by a "turn off the csrutil. A nice side effect is that I can re - open the disk encrypted with my known password.

  Isn't it strange?

  I have long run out of support, so I can hardly open a ticket for this. Maybe some else will do so?

  See you soon,.

  Gerd

  asux wrote:

  I have long run out of support, so I can hardly open a ticket for this. Maybe some else will do so?

  With your same Apple ID, you can register for a free developer account and start a conversation with Apple engineers

  Bug Reporter https://bugreport.apple.com/

• HP Pavilion Notebook 15-p045tx: wireless capability is turned off, the Wi - Fi button on / off Greyed Out

  Hello

  I was faced with this problem for a lot of time.

  The Network Diagnostics, it gives this error:

  WiFi is disabled

  I don't have any hardware button that can wifi device off / turn on my keyboard, see the example image below:

  I never turned off the device physics wifi directly or from the BIOS.

  Tried the "f12" also, airplane Mode which also did not help.

  in any case, I tried on things until now, nothing helps:

  (1) reset BIOS HP using HP Usb Disk

  2) update drivers wireless Broadcom using HP Support Assistant

  (3) re - install the Broadcom drivers

  (4) install the Realtek drivers

  (5) Restroing 8.1 full disk recovery Windows.

  (6) installed Linux (Ubuntu/Fedora), but that also free WiFi does not appear.

  Please guide me what can be the possible cause of this problem.

  The issue seems to be with my wifi chip.

  Eventualy I had to take the laptop to the Service Center. The guy tried everything I did once again.

  Finally, the issue is resolved, he plugged into the smart wifi, cleaned both ends, a little with the help of an eraser and reinserted and voila, it has detected. He said it could be the issue of carbon deposited on the ends of the chip connection.

  Since then, I've encountered same question several times, and everything I do is open my laptop, plug out a smart WiFi card mother, clean up a bit and plug it again.

  And he started working like a charm.

  Maybe it is loose or I don't know what the exact problem is.

  But he still has a problem with the antenna, I get very low my wifi signal, even if I'm in the right range of wifi router.

• How can I turn off the monitor (e.g., "standby") via the command line at the push of a button (or any other shortcut need not additional software)?

  Hello

  I don't like it when, after a break from work on my PC, the screen turns off as set up through "Power Options" in the control panel. That's why I put the relatively high threshold.
  However, when I know that I will not need the computer for a while, I want to save energy and wish the mode "sleep" could be activated immediately. Turn off the screen is not an option, because it has a USB hub built-in - off completely would be to unplug any connected device. Usually, if the computer has always works and might need the resources connected.

  Ideally, by pressing a button (or start a program or something), the screen would immediately go in mode 'sleep'.

  On systems prior to Vista and 7, IIRC, running a command in the sense of:
  Rundll32.exe user32.dll, SendMessage (HWND_BROADCAST, WM_SYSCOMMAND, SC_MONITORPOWER, 2);
  would do the trick. The dll should run the command to set the monitor to sleep. We could create a shortcut or even integrate the command in a batch file, but unfortunately it doesn't seem to work on Vista or 7.

  Does anyone have an idea on how to do it on Windows 7?

  I would strongly try to avoid having to install any additional software to help me. (There is quite a little all about, even free applications that promise to do exactly that, but I want to avoid them if possible.) "And I can't believe that this basic that could be done on XP cannot act more on 7!).

  Thank you for your help,
  NicApicella

  Hello

  Sleep is one thing and switching Off the Display is quite another.

  I found a way to turn off the screen in case you don't have a hardware switch or a keyboard shortcut as in my Dell Inspiron laptop (Windows 7).

  Create a batch with the following script file:

  echo off

  C:\Windows\System32\powercfg.exe-changer - monitor-timeout-dc 1
  C:\Windows\System32\powercfg.exe-changer - monitor-timeout-ac 1

  START/min/Wait C:\Windows\System32\scrnsave.scr s

  C:\Windows\System32\powercfg.exe-changer - monitor-timeout-dc m1
  C:\Windows\System32\powercfg.exe-changer - monitor-timeout-ac m2

  with the idle time to turn off your screen set in the Control Panel, replace m1 and m2.

  Control Panel > Power Options > any 'Active' diet Plan > change Plan settings > disable the display setting (minutes).

  For example, in my computer laptop m1 = m2 = 30 and 10.

  Now create a shortcut to the batch file and optionally assign a keyboard shortcut and an icon.

  Explanation of the script:

  The first two commands sets the idle time Display Off for the minimum possible setting of 1 Minute for the AC and DC (battery) power. The third command put the system mode blank screen saver 'instantly' and / Wait for the screensaver to terminate application. After 1 minute of inactivity, the monitor turns off power completely.
  The Saver screen/Wait is over by the event of the reactivation of a movement of the mouse button, the last two lines of code will come back the idle time-out settings of origin defined in the Panel view. This to ensure that after waking up, the display does not Turn off all 1 minute of inactivity expire.

  Kind regards

  Sushovon Sinha

• Disable the ability for applications prevent turn off the screen and start screen saver

  Hello

  I need to disable the ability of application full screen to turn off the screen and start screen saver. Basically just need to it:

  When there is no entry in the application that is running in full-screen, I want to turn on the screen saver and turn off the display. As far as I know, the windows default settings is to prevent turning on the screen saver during modes full screen.

  Thanks for the reply

  Hello

  Thanks for posting your query in Microsoft Community.

  According to the description, I understand that you have related questions screen saver settings in Windows.

  A screen saver is a program that, including the screen or filling it with moving images or patterns when the computer is not in use.

  Screensaver programs were designed to help avoid these effects by automatically changing the images on the screen during periods of user inactivity.

  Windows uses photos that better match your monitor for locking screen slide show.

  For more information: See photos on the desktop, start and the lock screen

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• turn off the starting voltage and noise stop

  I have Windows 7 Home Premium on my computer and I put it to any noise.  However, I always get this sound weird start (even with the Windows startup sound play unchecked) and I also get sound when I shut down the computer.  How can I do both of these sounds stop?

  Hello

  I apologize for the late response.

  You can try to turn off the sound in safe mode and see if that helps.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.  How can I solve the problem and use the software again?

  I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.

  How can I solve the problem and use the software again?

  If you use a perpetual Photoshop and formatted your disc version of starting without disabling your activation of Photoshop, you also Adobe supports help you activate Photoshop once you retrieve your serial number.  The startup disk formatting would destroy that credential of Activation Photoshop machine which is registered in the database of the Adobe activation server. Which reduces the activation numbers you have to use.  If you have Photoshop installed on a second computer that means that you have no free activation available as well, even with your key you can't activated the machine.

• Turn off the price list column in the sales order

  Hello
  
  I turn off the price list column to use the default value, using after customization of the form in the form of orders.
  
  Event trigger - WHEN-NEW-FOLDER-FORUM
  Trigger - ORDER object
  Condition - NULL
  Actions-
  UPDATE_ALLOWED - FALSE
  ALTERABLE_PLUS (APPLICATIONS COVER) - FALSE
  
  Even if the field is grayed out (disabled) and indicates the default as expected, the user is still able to change the list of prices by pressing Ctrl + L option and selecting desired value.
  How can I limit the LOV to populate the same?
  
  Thank you

  Thanks guys, I already fixed that using constraints of process.

• I need assistance with turning off tension or turning off the video card integrated on my inspiron 530!

  I need help to turn off the power or turn off the video card integrated on my inspiron 530, I had the drivers of the 8600gt installed and ready, but whenever I put the DVI in I get a black pic, so I did research online and I found the way, and that is to disable the video card intel which is located on the motherboard then how?

  I learned that I have to press F2 on the screen of the BIOS and go somewhere.

  so please help me!

  Thanks in advance

  Here's my card, if you need em

  Amount Total of Dell Inc. manufacturer of model system Inspiron 530 system memory 2,00 GB RAM System 32-bit operating system to type number of processor cores 2 64-bit capable Yes storage Total size 298 GB hard drives (C :) disk partition 162 GB free (288 Total GB) disk partition (d :)) 6 GB free (Total of 10 GB) Media Player (e :)) disc of CD/DVD media (g) adapter DVDCD/disc display of graphs of type Intel (r) G33/G31 Express Chipset Family graphics Total available 286 MB dedicated graphics memory 0 MB system memory dedicated memory 128 MB shared system memory 158 MB display adapter driver version 7.14.10.1437 monitor main resolution 1440 x 900 version DirectX DirectX 9.0 or better)) network card Intel (r) 82562V-2 10/100 Network Connection Network Microsoft Tun Miniport Adapter

  
  

• A seemingly simple question about the free transform tool.

  I have always used the free transform tool where the thing that turns in the background, and the transformation automatically makes a new layer. How can I do if the transformation will not cause a new layer, and it won't be the thing in the background which has been transformed to the original?

  I noticed that with other people, it is not the thing that has been transformed in the background, so they have to deal with him.

  Edit - Transform does not a new layer automatically AFAIK.

  Any chance you've been making is something like this?

  1. duplicate the layer with the tool move, possibly by holding down the Alt (or Option) key while dragging with the mouse.

  2 to see the transformation of the controls is enabled for the tool move, which means that the show handles when the move tool is selected and immediately, it would be possible to transform what has been moved / duplicated.

  

  -Christmas

• How to turn in lots on / turn off the layers in a large group of files

  I lifted this code to another debate that is supposed to say it works, but it doesn't.

  I get the error message: object does not support the method or property 'length '.

  I looked at other scripts to batch process this line of code seems to be OK.

  I know it's a very simple script and that the Tower on / turn off the part of the layer of the script works perfectly well (on individuall pages), but for some reason I can't get this lot of process.

  I have a set of several version of files with layers like 'from' for the Germany, "us" for the United States, etc. that I need lots open until I can print.

  Here's what I have:

  myFolder var is Folder.selectDialog ("Select folder Indesign");.

  var myIndsnFiles = myFolder.getFiles ("*.indd");

  for (k = 0; k < myIndsnFiles.length; k ++)

  {

  var myIndsnFiles = app.open (myIndsnFiles [k]);

  var myIndsnFiles = app.documents [0];

  var answersLayer = myIndsnFiles.layers.item ("us");

  answersLayer.visible = false;

  app.activeDocument.close (SaveOptions.yes);

  }

  Can you correct/explain what I am doing wrong?

  I had the Sergey Version to work. See below. It is very different from my original. I understood why my original wasn't, but could not know how to solve this problem. I tried to insert Laubender code in it, but I got the same error as above "object does not support the property or method 'length.

  I made a few adjustments so that the script turns off all the layers that need to be turned off and then turns on the layer I need.

  Everything works perfectly except that I wonder if there is a way I can disable all warnings, such as missing links, so that it treats the whole batch without a break. Maybe that's what Laubender spoke.

  myFolder var is Folder.selectDialog ("Select folder Indesign");.

  If (myFolder! = null)

  {

  var myIndsnFiles = myFolder.getFiles ("*.indd");

  for (var k = myIndsnFiles.length - 1; k > = 0; k-)

  {

  Try

  {

  myDoc var = app.open (myIndsnFiles [k]);

  Marquetry var = myDoc.layers.item ('in');

  inLayer.visible = false;

  var itLayer = myDoc.layers.item ('it');

  itLayer.visible = false;

  deLayer var = myDoc.layers.item("de");

  deLayer.visible = false;

  var ukLayer = myDoc.layers.item ('uk');

  ukLayer.visible = false;

  var usLayer = myDoc.layers.item ("us");

  usLayer.visible = false;

  var intLayer = myDoc.layers.item ("INT");

  intLayer.visible = false;

  deLayer.visible = true;

  myDoc.close (SaveOptions.yes);

  } catch {} (error) ;// try-catch

  } ;// for

  } ;// If

• Why doesn't my button to turn off the legend and?

  I have a button that is turns on and turns off a legend in DPS. I saw him in other magazines DPS. I did my research and saw this question asked before, but the response has been of a hotspot button in the legend to turn it off. I would like the button to do both, to turn on or turn off the legend.

  I have attached a jpg of my object state in a screenshot, I made my legend a State and an invisable box state. Then you can see a screenshot of my button build. I'm sure I have my built wrong button.

  Could someone help me please? I do not have anyone to turn to work, it's all here.

  Thank you.

  Andrea

  Put the button in each State and set it to go to the next State.

  Bob

• I stop using the computer for a few minutes. Then the screen of the computer turns off. Its does not sleep I need to turn off the computer then put into market and re - turn on the computer.

  If I have not used the computer for a few minutes then the screen of the computer turns off. The computer is not sleep. I tried to use the space bar to wake him but he won't answer.  I have to turn off the computer. Then turn on the computer. This has happened for 2 months. I have a Dell DM051, 446 GB HDD with 329 free GB, 2 GB RAM, Intel (r) Pentium (r) CPU 2.80 GHz, ASUS A7 Series 240 and Windows 8 Pro graphics. I replaced the graphics card because I thought that this could be the problem, but it wasn't. I need to replace to fix this? Thanks for your help.

  You have disabled things like Hibernate and hybrid sleep, etc. on the power options screen in Windows?

  Have you checked the USB settings in the Device Manager? Search tab power management for each listed root USB hub and uncheck the box "allow the computer to turn off this device...". »

  And do the same for entries under Human Interface Devices (HID) device as Manager.

  Then restart...