Turn off the price list column in the sales order

Similar Questions

• How to turn off the most recent list used to term & other apps

  were if you search the registry problem disable MRU in all applications, especially the run command on the start menu, but I would like to eliminate all the other apps as well

  I found several solutions including one that mentions comdlg32, others who need to add fields to the register, any other fair value dword

  Is there a single solution or do I need a combination of solutions

  I didn't do this, but here I found at least 5 versions, one of which is correct & universal
  :
  1. [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Comdlg32]
  "NoFileMru" = DWORD: 00000001

  2.HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  Value name: NoRecentDocsMenu
  Value type: REG_DWORD
  Value data: 0 or 1
  0 = Yes, allow these recent docs
  1 = no, do not allow any recent docs

  Value name: ClearRecentDocsOnExit
  Value type: REG_DWORD
  Value data: 0 or 1
  0 = no does not clear
  1 = Yes, clearly their

  Value name: NoRecentDocsHistory
  Value type: REG_DWORD
  Value data: 0 or 1
  0 = historic Yes
  1 = no history

  3 turn off the history:
  Click Start--> Run--> type "regedit" in the Run dialog box.
  When in the registry, locate the following key:
  HKEY_CURRENT_USER > Software > Microsoft > Windows > CurrentVersion > Explorer > RunMRU.
  Right click on the RunMRU key and choose "Permissions."... ».
  Click on "Add..." ».
  Type "Everyone" and click OK in the box that opens.
  In the permissions (security) dialog box, select all and then deny read access.
  Click OK.
  Close the registry editor. You may need to restart your computer for the changes to take effect

  ' 4 ' most recently used ' list - how to disable file
  Previous

  The information in this article applies to:

  WinWay RESUME 9.0 and versions later

  Summary

  Like many other Windows applications, the menu 'File' of WinWay RESUME luxury offers easy access to read files recently. This article explains how to remove this list.
  More information

  Windows offers a system policy to disable the file 'most recently used' lists for applications in accordance with this particular policy standard.
  To turn off the "most recently used" list of files, download and run this file.
  To restore the list, download and run this file.

  Notes:

  This setting affects several applications, not only WinWay RESUME
  This setting applies only to the user currently logged on to the computer. You can repeat these steps for the other connections if necessary

  For advanced users

  The parameters above can be entered through the Publisher of the registry as well.

  Select Start, run, Reg Edit
  Navigate to this registry key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  To disable the "recently used file list", adds the value:

  Name: NoRecentDocsHistory
  Type: DWORD
  Value: 1

  To activate the "recently used file list", right-click on the 'NoRecentDocsHistory' and select 'delete '.

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion \Policies\Comdlg32 key. 2. create a REG_DWORD value called NoFileMru and set the value to 1.

  5.
  Type regedit in the box RUN, and then press ENTER. It will open the registry editor.

  2. now go to following keys successively:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer
  HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

  In the right pane, look for a DWORD 'ClearRecentDocsOnExit '. Its value could be set to 1. Set its value to 0 or delete it completely.

  The recent documents menu can be disabled easily by editing the registry. To do this, go to the following key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  Now in the right pane, create a new DWORD with the name: NoRecentDocsMenu and set its value to 1. Restart the browser to save the changes.
  You can also clear the RUN MRU history. All ads are stored in the key:
  HKEY_USERS\. Default\Software\Microsoft\Windows\CurrentVersion\Explorer\RunMRU
  You can remove individual entries or the entire list. To remove history to find inscriptions date on:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Doc find Spec MRU and delete.

• Turn off the text field (always submits page when you press enter)

  I have an area which allows you to enter search criteria. There are two fields and a button. The 1st field is a selection list that gives a list of columns in a database that can be searched on. The 2nd field is where the user enters the value to search for. The user can submit the search in 2 ways. They can press the button or press return when the cursor is in the 2nd item that is a text field (always submits page when you press enter). The results are then displayed in a region of report below.
  
  The problem I have, is that if the request is for > 10 seconds and the user gets impatient and hits the Enter key or the button search again the query is returned for a second time (or third or fourth according to the impatience of the user) causing the claim on the basis of data with a negative impact on the performance of the system.
  
  I know how to handle the search key. On a click event on I turn off the button so that the user cannot click on it again and resubmit the request.
  
  My question is - how can I turn off "always provides a page when you press enter" text item when the user presses enter? I tried an onclick event, but disabled the front element I could type in anything. Onblur event does not seem to do anything.
  
  Any ideas would be very appreciated.
  
  Andy

  Hello

  First of all, one thing to try: attributes of the Page, there is a section for the presentation in double - try setting this option on no.

  Otherwise, using the text field type, adds the following to the INPUT tag:

  onkeypress="return submitEnter(this,event)"
  

  which means, you can call your own function of javascript on the onkeypress event, the final line would be call submitEnter(). But you can set the value of a hidden page element:

  function doEnter(t, e)
  {
   if ($x('P1_SEARCH_RUNNING').value == 0)
   {
    $x('P1_SEARCH_RUNNING').value = 1;
    return submitEnter(t, e);
   }
   else
   {
    return false;
   }
  }
  

  Then, after changing your element to an element of normal text on the attributes of HTML form elements, add in:

  onkeypress="return doEnter(this,event)"
  

  Andy

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• How to make it turn off the touch screen?

  I don't want to use the touch screen. How to turn off the it? It is activated by all sorts of things, like my touch cat's tail, or an insect landing on it, or a curtain blowing against it. I don't type using the screen, I prefer the keyboard that I can not type quickly on the screen. I would like to turn off the touch screen when I use it not (most of the time), or even permanently - it is not useful for what I want to do that the screen is not as sensitive or as fast as the input devices that I usually use.

  Hi, I have a HP TouchSmart 320-1030, so it can work on your touch screen:

  1. Press Windows + X logo.
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select disable from the list.
  6. Click Yes in the dialog box that asks you if you are sure you want to disable the touch screen driver.

  When you want your touchscreen to work again, follow the above procedure, EXCEPT when right-clicking on the touch screen driver, select enable.

• When my battery is fully charged, what button I press to turn off the battery and use the DC

  When my battery is fully charged, what button I press to turn off the battery and use the DC. I need to know what to do to avoid the impoverishment of my battery. OR is it save to leave the computer on, even when the battery is fully charged

  Well, actually from what I read, it's correct exactly as it goes, but not a complete list of the maintenance of the batteries all the factors, methods, practices and details regarding the definition of periodicals.

  While he was just more info not really part of what has been requested, this is why I don't give him properly a collection, I appreciate that you expand on it with greater precision.

  It is not often that one of my messages is considered as not long enough.  :-)

  Thanks for the help.

• Drive external DRIVE not detected (2 PCs), after turning off the PC during the error checking

  I ran properties/tools/error-check on a (regularly used to back up this PC XP) external HARD drive. After 2 days, error checking was still running and not even 1/3 way 4th Phase but I need PC. It was not possible to stop "Error Check" from the dialog box then I tried Task Manager/Applications, which said that nothing worked, so I turned off the PC.

  When I restarted the PC, external HARD disk was not in my computer. Control Panel of configuration/addition does not see it no more. However, when I plug / unplug the station. HDD USB cable, the computer makes a noise and is also recognized in "Device safely Shut Down" as a USB storage device mass (but no drive letter). I tried to start/run/Cmd/Diskpart/List Disk and it is not listed.

  NB. I checked the post. HARD drive on a Linux PC, which also does not detect not, then it is certainly the post. Drive HARD, not the XP PC.

  Can offer you any advice?

  Hello

  · What is the number and the model of the hard drive?

  As you mentioned that the issue isn't with the operating system but with the drive hard, for better support I suggest you to contact the manufacturer of the hard drive.

  You can also get in touch with any local technician who can help you with the same.

• Configuring updates stage 3 of 3 0 full do not turn off the computer

  Got the scren then restart the pc "Configuring updates stage 3 of 3 0 full do not turn off the computer" and does not get the login screen. Every time when restarting the pc get the same error. Also not able to login in SafeMode also.

  Please provide the support for the same thing.

  You probably eventually turn off manually.

  Read this:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you have problems to restart, read on:

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And wonders about the updates of Windows:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, although wanting to tell them exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I get a message telling me go download 1 update and do not unplug or turn off the computer.

  I get a message not to unplug or turn off the computer until 1 update is complete.  After 3 hours, the same message appears and nothing has been updated.  WHA'ts the problem?  Thanks-John

  Please provide more information for your issue to be diagnosed.

  Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Disable the download Anyconnect client / turn off the url connection

  Hello

  Is there a way to disable the Anyconnect client download when you navigate to the anyconnect url? Or just make the connection of the url is not accessible
  While users can still connect with their client anyconnect installed in the corporate network.

  Thank you!

  Dave.

  You can't disable the download directly. This had been discussed several times here at least one CSC who also confirmed a case of TAC. Link.

  A hack is that if your image Anyconnect is an older, users will never invited to be updated.

  Re URL, you can turn off the alias that fill the drop-down list on the web portal, but also long as your have the SSL VPN service active, external interface of the ASA will be used toward the top of the login page to less than the default connection profile.

  What is your reason for wanting to turn off in the first place? Perhaps there is another method to achieve what you want.

• How to turn off the message waiting after a connection failure?

  Hello

  I'm testing a new login process. Sometimes, I can not connect due to bugs in my procedures.

  
  

  On the login screen, there is a connection message that makes you wait 5, 10, 15 seconds etc after a connection failure.

  
  

  I don't want no waiting to connect again.

  
  

  I use APEX 5.0.3 with Oracle 11 GR 2
  

  
  

  Best regards.
  

  The connection limit is to reduce the risk of denial of service attacks, and therefore it is not recommended to disable this feature.

  That being said, you can turn off the countdown to the instance level and not at the level of the application.  Connect to Oracle Application Express Administration Services. Click manage an Instance from the drop-down list level, and then select Security. Click on the authentication tab, and then under global settings, to 'delay after connection attempts that failed in a few seconds', enter 0 to disable the countdown and allow immediate access.

• How can I turn off the shot of the gesture of my computer laptop windows 8?

  I am trying to turn off the gesture on my new laptop computer shot and nobody seems to have an answer. I go online to find an answer but it gives me some information to copy and use, but it doesn't seem to work. Can someone PLEASE give me EXACT instructions step by step on how to disable these gestures? It's EXTREMELY annoying that, although I am a game or do anything at all that the charm bar opens or opens the last bar app! Don't know how long I can take this! Thank you

  OK all you Sony Vaio users, you are absolutely right.  There is no way to disable the gestures of the mouse settings.  But... I figured out how to do without having to modify the registry.  Go to your applications screen and click on the form "VAIO Control Center" y go "Keyboard and mouse", at the top of the list below, you'll see "Turn it / off touchpad" with a power slider.  The right of the element is a button «Détails»  Until it clicks.  Who will open another box saying "Enable multi touch features" there you will see a selection of 'Show the charm' uncheck the box which, and you won't have to worry about those accidental shots again.  YAY!

• Menu error when turn off the DVD (CS4)

  Hello Adobe community

  I recently created a DVD in Adobe Encore CS4. It has two menus. The menu title has two buttons: Play driver (which connects to a minute 25 TV pilot) and Extras (which connects to a root menu). The menu root contains three music videos (which all the link to the main menu) and a main menu button (which has links from the menu title). I burned the Encore DVD and it played on my DVD player at home. Everything on the DVD works great (menus and videos). However, when I am on the title menu, and I turned off the DVD drive and turn it back on (with the disk still inside) something strange is happening. The menu suddenly compressed horizontally, and the buttons no longer work. Play, up, down, enter, none of the remote controls work more. The only way I can get the DVD works again is to insert a DVD completely different summer and then insert again my DVD. Then he is back to normal.

  I included two photos to illustrate what is happening.

  The DVD is in 16:9 mode, however the TV I watch on 4:3.

  IT IS WHAT THE MENU TITLE LOOKS LIKE WHEN I INSERT FIRST THE DVD: ALL THE WORK OF BUTTONS/LINKS/NAVIGATION... EVERYTHING IS GOOD.

  

  WHEN YOU TURN ON THE DVD MARKET AGAIN (AT THIS POINT), THE MENU BECOMES SQUASHED HORIZONTALLY. DISAPPEARS FROM THE BOXING OF THE LETTER UP AND DOWN, AND NOW NONE OF THE BUTTONS.

  

  Interestingly, when I go to the menu root (by clicking the Options button) and turn on the DVD player and turn on, the main menu is not affected, and all the buttons still work. The menu root is almost identical in design in the menu title, because it has exactly the same video in the background and audio playback on top. However, this problem occurs only in the menu title. Also, if I turn the DVD player working again while in the middle of watching one of the videos on the DVD, it still works very well. This problem occurs only in the menu title.

  The video in the menu title (and the menu root) is linked dynamically to Premiere CS4.

  Here is a picture of the organizational structure of the dvd:

  

  Parameters:

  PROJECT SETTINGS:

  Design mode: DVD

  TV standard: PAL

  Dimensions: 720 x 576

  Fields: Bottom field first

  Codec: MPEG-2

  Frame rate: 25

  Automatic transcoding: MAximum Audio/Video bitrate: 7,0 MB/s

  Audio transcoding scheme: Dolby Digital

  MENU SETTINGS:

  Base:

  End action: the title menu

  Replacement: Undefined

  Default button: 1

  Offset: 0

  Color scheme: automatic

  Automatically route buttons (checked)

  Operations: All authorized

  Aspect Ratio: 16:9

  Motion:

  Video: background (linked dynamically to Premiere CS4) video

  Audio: mp3 file

  Duration: 21:17 (seconds)

  Animated buttons (checked)

  Point of loop: 00:00:00:00

  # Loop: forever

  The DVD player is a Tevion AC-DVD51 (Jpeg/Mpeg4 Player)

  I have not included specifications on individual video files on the DVD, because they all work perfectly. It's just the menu title that plays up.

  If you want to get the list of additional parameters. Let me know.

  I really want to solve this problem, because I will be the sale of the DVD and I don't want this glitch happening on something, people have paid for.

  Thanks a lot for your time!

  -Robert

  Try your dvd on another dvd player.

• I stop using the computer for a few minutes. Then the screen of the computer turns off. Its does not sleep I need to turn off the computer then put into market and re - turn on the computer.

  If I have not used the computer for a few minutes then the screen of the computer turns off. The computer is not sleep. I tried to use the space bar to wake him but he won't answer.  I have to turn off the computer. Then turn on the computer. This has happened for 2 months. I have a Dell DM051, 446 GB HDD with 329 free GB, 2 GB RAM, Intel (r) Pentium (r) CPU 2.80 GHz, ASUS A7 Series 240 and Windows 8 Pro graphics. I replaced the graphics card because I thought that this could be the problem, but it wasn't. I need to replace to fix this? Thanks for your help.

  You have disabled things like Hibernate and hybrid sleep, etc. on the power options screen in Windows?

  Have you checked the USB settings in the Device Manager? Search tab power management for each listed root USB hub and uncheck the box "allow the computer to turn off this device...". »

  And do the same for entries under Human Interface Devices (HID) device as Manager.

  Then restart...

• Try to update iPad OS10 and froze on "check update" and now unable to turn off the iPad.

  Tried to update iPad OS10 and "check update" has been spinning for over an hour 1/2 and impossible to each slide to open or to turn off the iPad.

  Hello

  If you are sure its impasse press and hold the power button / stop and menu button

  Hold both down until you see the apple logo

  It may take 30 seconds.

  You have enough space on ipad for download, you need about 4 g?

  See you soon

  Brian