HP Photosmart C4480 on Windows 7

Similar Questions

• HP photosmart C4480: HP photosmart C4480 does not print colors

  I had other questions on this matter. Changed to the new color cartridge. The printer will print a new alignment page that has the color on it, but all the images or type I try to print in color out just black and white. I don't have an option of black and white levels in my print window. Also do not have a function of options as someone did in a similar question. Impossible to find anywhere in the preferences system, in the window print function buttons printer to specify the color and black and white.

  Never had this problem before using Windows or Mac computers. Printed of this same laptop several times over the years, no problem. This just started happening out of nowhere starts at the beginning of this summer. Same notebook printed in color in the office. No indication I need new drivers, tried to reinstall the printer just to be safe.

  Any ideas? !!

  Thank you!

  Hi @2534Melissa,.

  Welcome to the Forums of HP Support!

  I understand that you are unable to print in color with your HP photosmart C4480 printer. I will definitely do my best to help you.

  In my view, there is a problem with the device driver, follow the instructions.

  Step 1: Resetting the printing system:

   

  To begin, I will have you reset the printing system on your Mac. Please click herefor instructions on how to perform the reset. When the site opens, follow the steps under"Reset printing in OS X Lion system" because the steps are the same for Mac OS X 10.10. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them po do add not your HP Deskjet back in right now.

   

  Once the reset is complete, proceed to the next step.

   

   

  Step 2: Uninstall the drivers and software:

   

  Please click here to find out how to properly uninstall your printer. Once the site opens, select the drop-down list 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps under two method to complete uninstallation.

   

  Once the uninstall is complete, please continue on.
  
  Step 3: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

   

   

  Step 4: Manually install the driver Package:

   

  Please click here to manually download the package from Apple to HP v3.0 printer driversupdate. Once the site opens click on the download button at the top. Follow the instructions on the screen to install the driver package.

  Step 5: Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

   

  Step 6: Add the device:
  

   

  
  1. click on the menu of Apple , then Preferences System.

   

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

   

  3. click on the name of your printer, click the sign minus (), then remove the printer.

   

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

   

  5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Deskjet driver is selected.

   

  

   

  6. click Add to add the printer to the list.

   

  -Source

   

  Once your printer is properly added to, please try printing again to verify that the problem is now resolved.

  Posted by Mr X-23.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Photosmart C4480: Scanning and printing

  When I scan to print printing resulting is a quarter the size of the image or document.   How to set.

  Also, I want to put this printer on the Windows 10 64-bit desktop

  Hi @Fuchsia2007,

  Thank you for joining the HP Forums!

  I understand that when you copy with your HP Photosmart C4480 printer print is a quarter the size of your image or a document and you want to use this printer on Windows 10. And I'm happy to see it for you!

  There are drivers available for this printer on Windows 10. So, when you are ready, follow the instructions in this guide, download and install the driver printer and software Via USB.

  About the size of the copy, please see page 58-61 of the user guidefor your printer.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this information helps!

• HP Photosmart C4480 all-in-One takes forever to print

  HP Pavilion dv6-6061eo laptop

  Serial number [personal information deleted]

  Prod, number: LQ769EA #UUW

  Printer: HP Photosmart C4480 all-in-One connected USB

  Operating system: Windows 7 - all updates - updates of August incl. -ETH on

  Troubleshooting done - but all the reports in the order

  My Tech expertise is intermediate.

  No new software has been installed

  Laptop has worked without problem with a printer HP Photosmart C4580 in Scandinavia, but after my return to France where I use a HP Photosmart C4480 takes forever to print even a single page.

  Hello

  Curiously, the problem has now been resolved by changing the ink cartridges HP with a new set of HP ink cartridges.

• Can scan Photosmart C4480 works on a computer with Vista home edition?

  I have a HP computer with windows Vista, 32-bit.  I downloaded Photosmart C4480 and each time get an error at the end.  The printer works.  The copier works.  The scanner does not work.  I made scan trouble shooting and the shooting of printer problems and uninstalled and reinstalled the C4480 at least 4 times, following all the instructions.  Yet, I still can't scan.  Can you help me?

  I've included a link to a document, you can try:

  http://support.HP.com/us-en/document/c02661093

  Also, if you have not run the diagnostic utility scanner, it is very useful:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=OJ-96506-1&cc=us&DLC=en&LC=en&OS=2093&product=3418705&sw_lang=

• Photosmart C4480: Not printing in color documents

  Installed new cartridges, color works on all pages of test, but not in any application. The color displayed in the preview windows, if I understand correctly, this means that it is a printer problem. Nothing don't helps, I have updated the driver. All troubleshooting tips seem to apply only to Windows platforms that I don't get the same choices in preferences dialog boxes. Black and white and the quality of the project are NOT verified. Help?

  Welcome to the HP community @Kaiulani,

  I understand that you are unable to print in color of a Mac OS X 10.10 Yosemite to your HP Photosmart C4480 printer. I will definitely do my best to help you.

  Since you are able to copy in color, I think that there is a problem with the device driver, follow the instructions.

  Step 1: Resetting the printing system:

  To begin, I will have you reset the printing system on your Mac. Please click herefor instructions on how to perform the reset. When the site opens, follow the steps under"Reset printing in OS X Lion system" because the steps are the same for Mac OS X 10.10. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them po do add not your HP Deskjet back in right now.

  Once the reset is complete, proceed to the next step.

  Step 2: Uninstall the drivers and software:

  Please click here to find out how to properly uninstall your printer. Once the site opens, select the drop-down list 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps under two method to complete uninstallation.

  Once the uninstall is complete, please continue on.

  Step 3: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 4: Manually install the driver Package:

  Please click here to manually download the package from Apple to HP v3.0 printer driversupdate. Once the site opens click on the download button at the top. Follow the instructions on the screen to install the driver package.

  Step 5: Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 6: Add the device:
  

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the name of your printer, click the sign minus (), then remove the printer.

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Deskjet driver is selected.

  

  6. click Add to add the printer to the list.

  -Source

  Once your printer is properly added to, please try printing again to verify that the problem is now resolved.

  Originally posted by Mr X-23.

  Please respond to this post to let me know the result of your troubleshooting.

  I hope this helps.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• HP Photosmart C4480 - blurry text when printing *.pdf

  Hi,

  I seem to be a common problem but can't seem to find a common solution. I have a printer [HP Photosmart C4480] who works well for ages. Now, however, seems to have problems printing pdf. As I said (or rather typed), This seems to be a common problem. In other sources on the internet, it is described as dark printed text or text that looks blurry (for example, here). It seems also the text is printed in a shade bluish the color of the font of the text itself is black. Just for the record:

  -J' restarted my computer. 3 times;

  -J' have 2 new hp original cartridge in the printer. The printer is aligned cleaned and everything;

  -L' printer is OK with other files (meaning not being not not *.pdf);

  -This isn't the files. They are ok. It's several files from several reliable sources (for example, my University) that all print sharp printers not HP. I would include a sample attachment, but I can't... O well. I'll add a link. You are here. (* Edit: link has been removed after the problem has been resolved).

  -The problem with the same printer on 5 consecutive laptops running Windows XP upwards and up to what Windows 8. All have the latest version of Adobe.

  -Adjustment of the color to print in black and white (only black and white) does not deny the problem.

  * Edit:-connected via USB.

  * Edit:-portable Test computer running Microsoft Windows 7 x 64 Home Premium (Microsoft Windows 7 Home Premium
  Version 6.1.7601 Service Pack 1 Build 7601).

  * Edit 2:-tried another cable USB (thanks for the suggestion Rich1!). Unfortunately, no results .

  * Edit 3:-problem solved partially. Software incompatibility between HP and Adobe. See the workaround. Only works for gray-scale printing.

  * Edit 4: Rich1 helped me to identify the problem. Seems that when printing the PDF files, the printer does not seem to use black ink and in turn simulates black by combining the primary colors (which gives all the quality of the results, where the blur). This problem also exists in Acrobat with Foxit substitution (for example).

  With sincere friendships.

  J

  I think I've solved the problem, even though it may persist in color prints.

  HP, this seems to be a widespread between the printing software and Acrobat Reader problem. I suggest that you find a more permanent solution. First mention of the problem lies in 2008 and it is widespread, but you seem to be ignorant.

  As to the question.

  This question seems to raise its ugly head after an update to Acrobat Reader. Several sources confirm this. As is the case, software HP seems to be an incompatibility with Acrobat Reader. It sucks because it is the most popular format for sharing on the internet of documents.

  As for the solution.

  1. do not use any web application to print. Save the file. Open it in Adobe Acrobat Reader;

  2. open the print menu [file > print];

  3. click [Advanced] at the top right of the screen.

  4. under color management, check that box to the left of something to the effect of "let the printer choose colors". (I have an English version of the software Acrobat Reader installed, bear with me. Press [OK];

  5. to return to the main print window, go to the menu of [Properties] in the top right of the screen. It should be next to the menu advanced;

  6. in the Properties menu, select the [color] tab. Once there, select an item to the effect of "print in grayscale". Directly under this option must be a menu drop-down. In this menu, select "use only black ink. Press [OK];

  7 print the file. As long as you print in black and white, the focus should be good.

  Hope this helps someone else! If you like my solution, give this guy there Rich1 some kudo is such that at least he had the kindness to answer and help me solve this problem.

  Thank you!

• HP Photosmart C4480: software HP Photosmart C4480

  I just bought a new desktop computer Dell Inspiron 3646.  My printer HP Photosmart C4480 confidence, but old, works very well and is the printing of the new computer, but I don't have the possibility to check the ink levels, etc.  Can someone advise how to restore this function.  The installation software provided with the printer does not work with Windows 8.1.

  TKS,

  Steve

  Hi @SteveM571

  Please go on the HP Forums! I'd love to help you install the software in order to check ink levels again.

  Download and run the HP printer install wizard for Windows

  The HP printer for window installation wizard was created to help Windows 7, Windows 8, and users Windows 8.1 download and install the latest and most appropriate HP software solution for their HP printer.

  Alternatively, you can use printing HP and doctor Scan to perform this maintenance like cleaning the print heads and to check ink levels.

  

  

  

  Click here to download and run the print and Scan Doctor > www.hp.com/go/tools

  I hope this solves your request.

• 'New' (to me at least) Photosmart c4480 all-in-One

  I just took a lightly used HP Photosmart c4480. The family that bought provided all the documents provided with the printer. as well as the installation CD.  The original receipt dated 21/10/08. As it was before the release of Windows 7, the installation CD refers only Widows XP and Vista.

  Can I use this CD to install the printer? Can I find drivers that will make this unit operate within the Windows 7 platform?

  I thank in advance

  Hello

  Thanks for posting your request,

  You will not be able to install the drivers on the Windows 7 OS by using the CD that came with the printer.

  In order to install drivers on windows 7 operating system, please download the drivers from the link below and install it:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-74899-1&CC=US&DLC=en&LC=en&os=4062&Product=3418705&sw_lang=

  Thank you.

• Photosmart C4480 - sharing between XP and Vista problems

  I have my Photosmart C4480 connected via USB on my desktop running Windows XP. I have a home network set up between the desktop and my laptop running Windows Vista 32-bit. Sharing works files and the computers can succesfully mutually ping no problem.

  I have the printer to share in XP, but Vista does not see the printer on the network. I installed the printer drivers on both computers.

  I know that's not where he's going, but maybe someone will read it. I called the technical support and spent 57 minutes on the phone and got anywhere, not less than 40 of the 57 minutes were spent in complete silence. The only stage of the tech support rep asked me to do is to download the latest drivers on the laptop, but then me has said he did not install. After 57 minutes, he sent me an email with a link to the plug of the printer. He asked me to read him what it says beside 'Connectivity' which of course was USB 2.0. I had already tried to explain once Mr the difference between a printer wireless and a shared printer on a wireless network. Clearly, he never had the image. After reading the option of connectivity USB 2.0 for the guy, he noted that the printer could not be used on any wireless network. So frustrating. Very, very disappointed in HP technical support. Very, very unlikely that I buy another HP product.

  Someone help me please.

  I'll pass by this very detailed and try to think you don't know what you're doing so that the directions are clear and easy for anyone to understand.

  1. you must first install the printer on the computer on which it will be connected to via USB (Windows XP computer in my example). Follow the exact instructions that came with the printer for best results. The directions are simple and clear and the steps must be performed in the order that they advise for a correct installation.

  2. After you have the printer installed and working properly on your computer, the printer is directly connected to via USB, use the installation CD to install all the drivers on the computer you want to access the printer over your home network (Windows Vista computer in my example). When you put the installation provided in this computer CD click on Install or Setup or anything else that is similar in option you are given in the menu. When you get towards the end of the installation, Setup prompts you either to connect the printer to the computer or to continue and complete the installation without connection. You want to complete the installation without the printer connection.

  3. now that you have all the appropriate drivers installed on computers you want to set up your network. On the computer on which the printer directly connected (computer Windows XP in my case), you want to run the Network Setup Wizard to set up the printer share. In Windows XP, you want to click on start > my network places. This will open the my network places window. In this window on the left side, you should see a few options in the section "network management". Click 'set up a home or small business network. This will open the Network Setup Wizard. You will notice that one of the bulleted items listed for what you can do with a network is "share a printer. Follow and complete all the steps in the Network Configuration Wizard. When you are finished, your network must be configured and ready to go.

  4. now you want to turn on sharing the Photosmart C4480. Once more on the computer on which the printer directly connected via USB (once again, the Windows XP computers in my example), you want to click on start > Control Panel > printers and faxes. In this menu, you should see your newly installed Photosmart C4480 printer. Right-click on the printer and select "Properties". This will open the window properties of HP Photosmart C4400 series. You will notice that the window has several tabs at the top. Click on the "Sharing" tab, select "share this printer" and name the printer in the "share name:" text box. Do not the complicated name. I used "HP C4480" for mine. Click 'OK' to close the window and save the changes.

  5. you need to know what the IP address of the computer with the printer connected directly via the USB port, so that we can ensure that your network is configured correctly and that the other computer (Windows Vista in my example) is capable of good communicate with the Windows XP computer. On the Windows XP computer that is connected to the printer, click on start > all programs > Accessories > command prompt. This will open the command prompt window. Type "ipconfig" and press ENTER. This will show you your IP address, subnet mask and default gateway. Note your IP address. There will be a series of four numbers, separated by three points (for example 192.178.1.2). You can close the command prompt window now.

  6. now you know what the name of the computer is on the network. Click the Start button then right-click on "My Computer" and select Properties. This will open the "System Properties" window You will notice that there are several tabs at the top of this window. Select the "Computer name" tab The name of the tab may vary from one computer to another, but there will be a tab named 'Computer name' or 'Network name' or something similar. Select this tab. On this tab, you will see "full computer name:" and then to the right of that will be the name of your computer on the network (the computer DESKTOP for example). Note that. Click 'OK' to close this window.

  7. now you are done on the computer on which the printer directly connected via USB. Get on your other computer (Windows Vista computer in my example). In Windows Vista, click Start > Accessories > command prompt. This will open the command prompt window. Type "ping IP address" and press ENTER. Put your IP (e.g. 192.178.1.2) where I typed "IP address". It tests communication between computers and display the results when the test is performed. If all goes well, it will say something like 4 packets sent, 4 packets received, 0% lost. If packets have been sent but not received then you have a network problem which must be settled before the printer you will work.

  8. assuming that the ping was successful, you are almost finished. Close the command prompt window. Always on the Windows Vista computer (the computer not directly connected to the printer via the USB port), click Start > network. This will open the 'network '. Now your computer will search and display all present on your network. It may take a minute or two so be patient if nothing appears immediately. Finally the name of the other computer should appear (e.g. OFFICE). Double-click the icon above the name of the other computer. This should now show a list of all that on the other computer on the network. The common things to see here are printers and a "SharedDocs" folder You should see that the listed here HP Photosmart C4480. It is listed under the name you gave to the printer in step 4 above. Right-click on the printer icon and select 'connect '.

  9. This will open the "Windows printer Installation" window and says "connecting to the PRINTERNAME on computername. I don't remember exactly what happens the first time you do this, but it can ask you for installation and others. If so, just follow all the steps, it gives you, and he needs to connect to the printer.

  10. at this point, you are ready to go. You should now be able to open Microsoft Word or another program and print on the printer HP Photosmart C4480 from the Windows Vista-based computer on your network. The Photosmart C4480 will very probably not already set as the default printer so you will have to select in the menu of the print window in the "Printer name" drop It can open a window saying that the computer connects to the printer when you do this. After that when you click on print, your document should be sent on the network of the Photosmart C4480.

  11. If you want to set your Photosmart C4480 printer by default on the computer, it is not directly connected to (Windows Vista computer in my example), click Start > Control Panel. This will open the Control Panel window. Under the heading "Hardware and sound", click on "printer".  This will open the Printers window. You should see the "HP Photosmart 4400 series on ComputerName" icon in this window. Right-click on the icon and select "Set as default printer". After that, you should see a green and white check mark next to the icon of the printer. The Photosmart C4480 is now set as default printer on the computer, and whenever you print from any application will automatically be selected Photosmart C4480 printer.

  Hope all that made sense and solves your problems. If you please, after back and let me know if make you it work, or if you have other questions. I'll be more than happy to try to help!

• HP Photosmart C4480 all-in-One gives the HP Solution Center error

  Hello

  I have a HP Photosmart C4480 all-in-One printer. I also have a laptop HP Compaq Presario CQ60 with Vista.  These two are under the age of one year.

  I just used the ink contained in the supplied start with my printer ink cartridges, so I replaced the. The problem that I was going on even before I replaced the cartridges.

  When I run the HP Solution Center, it says at the top:

  "HP Photosmart series C4400

  Disconnected! »

  When I click on the Toolbox, it gives me an error will appear: "the computer is unable to establish two-way communication with the device.

  Well, it is certainly connected and it prints, copies and scans very well.  I'm used to be able to check on my ink level. Now, the solution Center think my printer is not yet connected.

  Any ideas?

  Thank you!

  HP Envy m7 running Windows 10.

  Simply click on the star

  Thank you

• Can not re - install Photosmart C4480 and get the error "printer is offline and error 41"

  Hello. I had some corrupted files Windows and don't update. As I put everything I like, I think I can't reinstall my HP Photosmart C4480 printer.

  My system:

  Sony Vaio, 64-bit

  Windows 8

  What I see:

  When I physically connect the printer via USB, the computer does not recognize that something has been connected. A flash drive inserted into the same port is recognized, so I don't think it's a problem of port.

  I tried a different printer cable with the same results, so don't think it's the cable

  Tried to install via the Setup program, but it does not recognize the printer.

  Tried to install manually several times. It usually looks like it installs, but impossible to print the test at the end of the installation page

  I got several error messages include:

  That not being able to communicate in both directions. I checked this setting and it is turned on

  Error 41

  Printer is offline (the printer is connected and turned on)

  After manual installation, the printer will appear in devices and printers and the print dialog box (after it hit Ctrl-P). In the dialog box, Photosmart is selected, but when I hit nothing print response happens - no printer and no printer icon appears in the taskbar

  I would greatly appreciate the help and advice to solve this. Thank you!

  Hi Renee,.

  This question might be incorrect or incompatible printer drivers installed on the computer. The State of a printer offline may be due not to the power of the printer. You must also ensure that network share can be disabled.

  For more information, see the link:

  http://Windows.Microsoft.com/en-us/Windows-8/turn-sharing-on-or-off

  Error 41 problem occurs if you install a non-Plug-and-Play device driver, but Windows cannot find the device. Here are some things you can try to solve this problem.

  If all the basic settings are checked and are up to the mark, you can refer to the suggestion of Pinaki displayed in the following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/network-printer-shows-offline-on-Windows-8/7851703b-492C-4e97-8063-f1fc2aa63ec0

  After you have uninstalled the printer driver, you can consult the following link to install the latest driver for the printer.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=3418705

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• Not compatible HP Photosmart C4480 printer ink cartridge

  HI - first time here - I have a HP Photosmart C4480 printer and have recently installed a new black ink cartridge - genuine HP 350XL - bought in Tesco and already used a few times.  I printed a page today, and when I went to another printing, the printer says that the cartridge was incompatible.  I had not touched the printer between the prints. I tried out both cartridges and resettlement but still get the same message.  Also tried to turn again printer.

  I could understand if there was a problem with the cartridge and it was rejected as soon as I installed, but does not understand why this happens between the printing of pages.

  Any help would be appreciated

  Thank you

  Here a link to a document that addresses this cartridge error message that you get on the printer. It will give you troubleshooting to try in an effort to solve this problem with the printer. I hope this helps. If you reach the end of the document and have done all the solutions proposed by the document, would seek to substitute.

  If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.
  
  HP Technical Support call case form:

  https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us & DLC = in & LC = in & Product = 5061082

• Printer HP Photosmart 8750 on Windows XP, do not print within the frame.

  Printer HP Photosmart 8750 on Windows XP does not print photo correctly and cannot be adjusted manually to print in time. Printing is too high or off the coast on one side or the other. How can I fix this?

  Hello
  
  Try to download and run the doctor print and scan located here:
  
  http://support.HP.com/us-en/document/c03275041
  
  It can fix its own much and if not to give a better idea of what is happening.
  
  Good luck!

• Photosmart C4480 scan to iMac with OS 10.6.4

  Improved (strength) of the eMac (OS10.3.9) to an iMac (OS 10.6.4 My Photosmart C4480 print OK, but don't scan - 'scanner could not be initialized. The 'automatically' updated software only once; I've deleted and reinstalled from the original disk, but this did not help.

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":
  
  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall< scrubber="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish
  
  Restart your Mac
  
  Now reset the printing system:
  
  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.