Turn off the sound in After Effects

Hello everyone.

Inside of After Effects, I have the Audio Down to level: -50, but I can still hear the sound. How can I The Mute Audio.

Thank you

Click on the audio icon (speaker) next to the layer to turn off the sound.

Tags: After Effects

Similar Questions

  • How to turn off the sound recording on a Camileo H20?

    I just got a new VCR Camileo H20. Directly from the box.

    I use it for video road races to complement the photographs that I take with my Nikon digital camera.

    I am really satisfied with the short video clips that I record, whether they are clear and sharp (fingers crossed). They are very well received by the riders.

    * http://www.youtube.com/watch?v=_bNCKCKafCw *.

    The only problem I have is that I would like to turn the microphone off. Supporters cry comments that are usually fairly light, but recently one or two went over the top with comments derogatory offence.

    I know I can turn off the sound in the video editing software that I use, but as I said, I would like to turn the microphone off.

    I do not understand why, when I put the * sound * to * Off * in the Menu it still records the sound.

    Any help on this would be really appreciated.

    Thank you.

    > I do not understand why, when I put the sound on Off the menu it still sound recordings.

    I m H20 not owner but I have a Camielo: 30. But the two are very similar, the sound-> off the coast of the option that you can find in the menu does not sound recording via microphone, but the sound that appears by pressing the buttons by navigating through the menu.

    If you can not turn off the sound while you record a video.

  • I accidentally turned off the sound to play videos online. How can I solve this problem

    I accidentally turned off the sound to play videos online. How can I fix it.iHAVE YEAR ASUS WITH WINDOWS VISTA

    Hello

    IE - Tools - Multimedia Internet Options - Advanced tab - check sounds in Web pages
    APPLY / OK - close and restart IE.

    If it has been verified - uncheck the box - APPLY / OK - close and restart IE - then go back and re-check.
    APPLY / OK - close and restart IE.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Camera blackBerry Smartphones - how to turn off the sound?

    Hi any person!

    Does anyone know how to turn off the sound on the camera?

    Thank you!

    Alex

    Alex, you can't without a third-party application.

    Google BerryAnnoying.

    And read this: http://supportforums.blackberry.com/rim/board/message?board.id=8100&message.id=6574#M6574

  • Re: Satellite Pro L670 - can I turn off the sound when the battery is empty?

    Hello

    Is it possible to disable the bios beep when the battery is empty or the laptop's Hibernate?

    I have a Toshiba Satellite Pro L670.

    Even when the sound in Windows is turned off the laptop do a annoying sound.

    Thank you!

    Maybe it sounds silly, but I put t understand why that should be disabled. When the battery reaches the critical battery level you will be informed about this and portable must be connected to the power running or you have to save your work and turn it off.

    Do you really want to work until the battery is completely discharged?

    Anyway, AFAIK this notification level BIOS cannot be disabled.
    Let's see if someone else is better informed than me.

  • How to turn off the message waiting after a connection failure?

    Hello

    I'm testing a new login process. Sometimes, I can not connect due to bugs in my procedures.


    On the login screen, there is a connection message that makes you wait 5, 10, 15 seconds etc after a connection failure.


    I don't want no waiting to connect again.


    I use APEX 5.0.3 with Oracle 11 GR 2


    Best regards.

    The connection limit is to reduce the risk of denial of service attacks, and therefore it is not recommended to disable this feature.

    That being said, you can turn off the countdown to the instance level and not at the level of the application.  Connect to Oracle Application Express Administration Services. Click manage an Instance from the drop-down list level, and then select Security. Click on the authentication tab, and then under global settings, to 'delay after connection attempts that failed in a few seconds', enter 0 to disable the countdown and allow immediate access.

  • Annoying noise, even after you turn off the sound pop up

    I don't know how to get rid of this annoying noise on my computer. Initially as if it's the pop - up, but I turned it off n keep me this annoying noise... someone can tell me how to stop... Thank you

    Please read my last post:

    1. DESCRIBE the sound - beep, snoring, thud?

    2 is him coming from your speakers or your PC?

    All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

  • Can I turn off the sound for a website but not computer?

    I like to play POGO games all of which come with a certain type of sound effects, but at the same time, I like to listen to my radio station streaming favor. How can I disable the sound for Web sites but not my music streaming?

    If it is an individual, video or audio on a web page, you can try to turn off or disable the audio using the audio and video controls on the web page, or you can install an extension that adds this functionality. It is called mute, and you can install it from https://addons.mozilla.org/en-US/firefox/addon/muter/

  • How can I turn off the sound of the camera shutter release?

    Hello

    I tried to silence the camera shutter sound of my new Moto G without success. Even if the phone is completely silent in its settings, and the sound pane is set to off in the camera application, the sound of the shutter still happens rather loudly. It is a problem because I work in a quiet environment and I need to take photos of business cards.

    Any ideas?

    The phone was purchased on the site of Motorola and the Global GSM version runs Kitkat 4.4.2.

    Thank you

    kzarog


  • With regard to the Epson V300 scanner. I installed the current version software driver successfully. It works fine until I turned off the computer. After the reboot, the scanner is not recognized and driver not found.

    On the page of 'Uninstall and change of program' of the computer, the Epson Scan icon with a red arrow on it.   In addition, elevated Epson Support found no problem. Indicated that the problem was with the computer or windows.      I installed on another computer and worked properly.    If there is a conflict with another device, I can't find it.

    Hello

    ·         You did changes to the computer before the show?

    Step 1: I would say you put the computer to boot and check that the software or conflicting drivers:

    http://support.Microsoft.com/kb/929135

    Note: Place the computer to normal startup by following step 7 from the link above.

    Step 2: Download and install the software driver in a clean boot state, and check to see if it helps:

    http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=113127&prodoid=63077159&infoType=downloads&platform=all

    Also turn off "allow the computer to turn off this device to save power" in power management for scanning.

    http://Windows.Microsoft.com/en-us/Windows7/products/features/power-management

    Note: Valid also for Windows 7.

  • Is there a way to turn off the sound on the source clips?

    I need a bunch of GoPro filmed by a drone of the screen and the sound is the mind numbing! How can I disable it? Thank you.

    Select the clips you want to keep silent in the project Panel and once you have all selected them, go to the Clip menu > edit > Audio channels and set the number of Audio tracks to zero {0} and click OK. You will get a dialog box warning that this will not affect clips already placed in the timeline panel, click OK. This will make the Video clips of single source clips.

    To restore the audio after viewing the source for use clips in the timeline, repeat the foregoing and redefine the Audio tracks on the number they were before you the muffler for viewing.

    MtD

  • How do I turn off the sound when one take a picture in the acer iconia a1 830

    I want to mute the sound when I take a photo in the acer iconia a1 830.

    This is my first time that i use this tablet, and I do not have this problem. I try to lower the sound level maximum. and I can hear the sound.

    This problem is very basic, and I need a solution.

    The other problem is the temp my tablet is 42 degrees Celsius (with an application to read the temperature of the battery)

    is normal that?

    I solved the problem. I downloaded another app to take photos and this app has the mute option the camera.

  • Turn off the sound on the timeline

    We have a clip that contains a set of audio files.  All sounds are on the timeline.   We tried the following, but none works.  Can anyone help?  Thank you!

    [on the frame where the sound starts]

    If (disable) {}

    SoundMixer.stopAll ();

    }

    or

    [first frame of the clip]

    var sndTransform:SoundTransform = new SoundTransform();

    SoundMixer.soundTransform = sndTransform;

    [on the frame where the sound starts]

    If (disable) {}

    sndTransform.volume = 0;

    } else {}

    sndTransform.volume = 1;

    }

    MovieClip you has a property of the soundTransform, you can use:

    If your code is in the parent timeline:

    var st:SoundTransform = mc.soundTransform;

    {if (Deactivate)}

    St.volume = 0;

    } else {}

    St.volume = 1;

    }

    mc.soundTransform = st;

    If your code is on the timeline of the movieclip, use 'this' instead of mc

  • Unable to turn off the sound for notifications of Tweed

    In Tweed and Accounts preferences, I am assigning to the option 'Play Sound' OFF and then go back to save my changes. If I come back preferences and accounts, it shows the 'Play Sound' like IT. Does anyone else know this?

    Thank you. I contacted the support of Tweed and got a quick response. It turns out that the problem is solved, if I "tap" the button ON / OFF instead of 'slide' button to OFF.

  • I can't turn off the sound of the camera.

    even if I turn on mute, his camera is always strong.

    Mr. have an iPhone 5

    In some countries that the camera sound can be muted, the Japan and some countries in the Middle East for the instance, but others as well.

Maybe you are looking for

  • 4 GB SD card not working after installing XP on Satellite A200 - 1 M 8

    After you install windows XP, Cap card reader, even if it means reading 4 GB SD cards. In addition, there are several currencies for which windows needs drivers and also the Bluetooth does not work. What should I do? P.S. for laptop - A200 - 1 M 8 Po

  • How can I stretch/tilt a rectangular selection in the preview?

    Hi all Q: can you the proportions for a rectangular selection of cut-and - paste be unlocked? Formerly, in Snow Leopard 10.6.8 cut and paste a rectangular selection of an image in the preview has resulted a selection with eight points of click-and -

  • Battery on Lenove z510 stuck on 99% and auto randomly closures

    Hello I use a Lenovo Z510 (Core i7, 1 TB HDD, 8 GB Ram, Nvidia gt740M) and I recently experiencing problems with my battery. Sometimes my laptop automatically shut down suddenly, without warning, and when I reload it agin til 100%, it will be discher

  • Read something simple using 60870.5

    I'm new on CIS 60870.5.  I need to read data using this Protocol. I have the IP address of the machine that has access to the data.  I guess that this is called the master (?). I was given a document with a bunch of "104 addresses".  I guess that tho

  • HP Envy 17: accelermeter

    After the Windows 10 update, I get an error message of start that accelermeterst.exe is not able to run. Go to the system configuration, it shows to be associated with the HP Accelermeter system tray. I went to the application to start and it says I'