Turn on sharing; I had to do in the two nodes?

Similar Questions

• Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  He broke. Make an appointment at the genius bar and get it fixed / replaced. There is no magic words that will do well.

• In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service. Ditto for "file sharing." How can I activate them?

  In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service.  Ditto for "file sharing."  How can I activate them?

  Hello

  Method 1: Make sure that the following services are enabled on the computer.

  (a) click Start and type "services.msc" in the search and click on services and ensure that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

• Turns off sharing multimedia files, because a Windows setting required or a component has changed.

  (Not sure if right section)

  I get this error message;

  Sharing multimedia files has been disabled because a Windows setting required or a component has changed. For any additional help, click Help on the Web.
  No matter what I do the problem persists, I restarted the network of Windows media sharing service player, I deleted the two files in Media Player folder, and the folder is located in appdata/microsoft /, I did the program to 'fix' automated through microsoft solution that resets the MP11 library and network settings.
  Please notify.
  I need sharing media for listening to music on my Xbox 360, the media center extender works very well, I can play music via my xbox with this fine method, however if I want to hear all while playing a game (which I did perfectly well until now) my xbox will not find my computer keeps resetting of sharing multimedia files off the power.
  Dell Inspiron - 1501
  Turion, AMD 64 x 2 1.80 GHz
  MEM: 2 GB RAM
  Vista SP2
  Help, please!

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to run the troubleshooting and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:
  Try to uninstall and reinstall Windows media player, and check if this may help:

  a. click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. click on media features, uncheck Windows media Player and click ok.

  c. restart the computer, follow the same procedure and control Windows media Player.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  For more information, see these links:
  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-settings-for-sharing-media-in-Windows-Media-Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/share-your-media-in-Windows-Media-Player-with-other-people-or-devices

  It will be useful.

• NAS200: One of the shared folders are not accessible by the same admin account.

  Good day everyone.

  I know that this is the best place to get the answer to my question.

  Anyway, we've had this NAS200 for a year or two now and there was no problems until recently.

  We have various accounts and folders in the storage and one of them is the shared folder A.

  Lately, when I try to open A shared folder, it tells me:

  \\192.168.XX.xxx\Shared notebook A is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  Insufficient system resources exist to complete the requested service.

  I checked my settings of the user and be the admin for the NAS, I have the abilities to read/write for all files in the NAS.

  I checked the folder via the drive (using Windows 7). Unlike other files, the shared folder A, does not display the availability offline and offline status. As follows:

  

  A shared folder has no display of the State, such as updated folder.

  I'm confused as to what is the problem.

  Your help is greatly appreciated. Thank you all in advance!

  "Insufficient resources" means that the Samba on the NAS server ran out of memory. It shouldn't happen, but it does. The reason is probably that you did a lot of operations on files at the same time (for example copy the entire directory tree), and Samba tries to keep information about each file in memory. You have probably seen it slow down much until you lost the connection.

  The problem will probably resolve once you restart the NAS server: push the power button on the rear closed (it emits a beep to confirm the press the button, then after a minute or two, the lights will be turned off), then press again to start (you will hear a beep, followed after a few minutes of another beep to confirm that it is online). Don't just pull the plug or you can corrupt your data.

  = Jac

• Several Airport Apple ID devices disappear shared devices and Software Configuration of the airport

  We have three Airport extreme and two Airport Express devices in two offices in the city.  Some time in the last two days, they all stopped appearing in the sidebar of Finder 'Shared' category (if they had attached disk storage) and they stopped from appearing in the Configuration software of the airport on any of the Mac on these networks. (They always seem to be correct, routing traffic, however).

  For a while, we left a desktop completely alone as a control group and did all our testing and troubleshooting in the other office.

  We-hard reset (to the factory configuration) all devices from the airport to an office. They began to appear again. Then we started to re - configure them again.  At the time wherever we had updated the devices they had disappeared again.

  So, another factory discount based configutations for each device to this facility. Then we added slowly in pieces of their configuration.  When airports have received Apple ID and associated passwords for associating with iCloud/BackToMyMac/WideAreaBonjour (depending on what you want to call it), the airport devices disappeared from the airport Setup.

  If we tried to configure another device from the airport to extend a network of 'invisible' airports, the new airports were "unable to find" one of these networks to expand.

  If we reset all devices without providing them with Apple ID and passwords, they worked mainly as you would expect. The main difference being now do not appear as having been recorded as BackToMyMac/WideAreaBonjour devices.

  One side for people dealing with this note: If your router are invisible, but they are configured to be configured from the EXTENSIVE worldwide network, you can use "File-> configure the other" and specify the address WAN of the missing aircraft and get this screen access as one would generally. From here, remove all the Apple ID associated with these devices, press "Refresh" to save the settings and they seem to reappear magically in the Configuration of the airport software.

  In that State, storage seems to be available, but only for devices in Domain Local (direct connection). Airports without AppleIDs will not appear in the field to iCloud/BackToMyMac/WideAreaBonjour, and it's as expected, given that these IDS is the means for the identification of their field.

  If someone else has noted these behaviors and if so, have an idea about specifically when they first appeared? Is there by any chance someone who knows of any change in registration or the MWAC of multiplication?

  Did you approach the problem exactly as I did in the past, and having encountered problems of the CCMM literally every version of OS X. They were all distinct problems with individual characteristics, and in some cases the solutions exist. Having said that the CCMM has been completely reliable recently - which means running the most recent El Capitan release on all my Macs. The initial versions (i.e. OS X 10.11 to 10.11.3 maybe) didn't work at all. I don't know which version fixed whatever the problem was, I am sure he has not worked for someone else.

  The same real place with Yosemite and previous versions as well. CCMM did not reliable until the exit "point three or four."

  Through these experiments, I believe it should be a pretty fast connection. If the connection between a Mac and all the others does not meet this requirement (whatever that is) all you will be able to determine, it's that the CCMM fails.

  Apple is characteristically silent about the technical aspects of the CCMM, probably because of security concerns. Nobody outside Apple knows how it works. If you're still having problems, I encourage you to contact them. After mentioning predictable you corrective raw materials (the two following links) you will be put in touch with someone who will look to what is false, providing diagnostic assistance and send your information to engineering. If it's something they should fix, you'll know not to the point of an OS X update is published.

  Set up and use Back to My Mac - Apple Support

  Get help using Back to My Mac - Apple Support

  With all the conversations I had with Apple on this topic (which were many, involving a large amount of tests) not once they disclose any causal factors individual, other than to reiterate the need to run the last OS X, versions and the latest versions of firmware for their routers. In your case, that means probably that your Mac update to El Capitan. It is after all the very first recommendation in their document of support above, until you do this you will still not get in step 1.

• I have windows vista home. and I had my laptop in the shop twice for virous removal and I get a code 646 on my laptop.

  Please help me. ? I had my computer in the store twice and abduction virous had done on it and I have a security program which is to stop the virouses enter in my laptop. I run Kaspersky security 2010 and I have a malware bites and anti spam as well as another system my tech told me. so, I want to know how can I keep these 646 codes to stop coming on the laptop. I have a toshiba with a pentium dual core prossesor.

  If you experience problems with the Office updates, try to manually download the same and install.
  You can search the individual updates here:
  http://www.Microsoft.com/downloads/en/default.aspx

  He just put in the KB number and then perform a search.

  If it always creates a problem disconnect from the internet and then try to install the updates, and another thing, you can try is turn off UAC before downloading a first update manually. See: (Guided Help: settings to adjust user account control in Windows 7):
  http://support.microsoft.com/kb/975787/en-us.

  How to use User Account Control (UAC) in Windows Vista
  http://support.Microsoft.com/kb/922708

  If not for the other updates:

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  TaurArian [MVP] 2005-2010 - Update Services

• Has anyone recently had an experience with the help of MS which seemed inappropriate in the way it was handled?

  I talked about what I thought, it was the 'answer Desk' many x since 2/2013. The first time, I agreed to pay a fee of $99.95 for their support of prem. My space available on my C: drve (my primary internal HD) had suddenly disappeared from aprx 30 GB less than 7 GB and I was getting warnings in order to free up more space for the OS to work (Win 7 Hm Prem). I was unable to do a restore and ended up opting for the help I thought may be some kind of malware... I sat down and typed chat w the tech until the store has been w / I 10 minutes from closing. He said to go ahead and that it would update me when I got home. When I got home, he said that I had nearly 200 cases to be a site where a virus or something like that. He also had somehow freed more than 80 GB on my C: drive. I was exhausted and overwhelmed by the upheavals which went down while I was gone for 15 min. I made the mistake of thinking I could get additional clarification of all cela the next day when I had little sleep. I've never been able to get a detailed account of what he wanted by 200 close to infections or how he had gotten me 7 GB when I left at more than 90 GB, when I got home fr store. I found w / I a few days I still had serious w problems my free space on the drive internal dissapating too low levels and still not the ability to do a restore. I tried a recovery when the restore has failed twice. I had to do several laps when I got a computer laptop w Vista as a model of HP for my 1st purchase computer - a laptop given to nine (w. XP). As we know, Vista was raided in MS * until they came out SP1 SP2 for the confused, tired of the masses. In any case, I haven't had any apprehension on the restorations - bk to the top of your list of files, the software U wanted to reinstall. When I tried it on Windows 7 in 2/2013, I learned, I was given a key to sting that was incorrect because of sm. I bought 7 online after that Vista would not even restart files en lost because the registry (where they went are beyond me, maybe Costa Rica). Forgive my black humor, but it's what has kept me sane while devoting my life to constantly face w Windows for 1 reason or another. Fast forward to February. I was assigned 6 diff cases impossible since then because after I received a regenerated prod key and the reciovery, I had lost my CD burning ability. The last 2 times I called 'Office of response', literally, I spent 5 -7 w h. Tech that didn't charge me but also left me w no solution after having exhausted me while they were just travelling. All this has a cumulative effect and they play you w. that to mind. Following the last was a guy named Alex who swore that he would call me the next afternoon at 16:00 and I never heard from him again, haven't had no case, said that no Alex was there, etc... Finally, yesterday I called and when I unbalanced young woman in its attempts to prelim to guide the conversation, she got her suervisor, a type of very vigorous hyperconfident, which all of my history w recent them and resolutely focused on sell me either one another session extraordinary $ 99.95 w simply ignored another tech or an extended warranty program to cover me for mos how. I do not know. After refusing not to recognize my recent w purchase offers even no follow-up, no help to solve the problem at all - I said that, although it was of course polite to its mandate - closest high-power, he ignored the very relevant inconsistencies that I did clearly too many times and with a less-than-slick method called simply ignore the objection and try to talk me into submission. I have rfealize many of you in the forum must have had some formal w MS Assoc. and I am not condemning the whole anything. I don't get what support degenerated. The guy went yesterday to a few administrative event viewer screen and "showed me where I had turned off many vital MS service components, including 1 thatr makes no sense whatsoever - I told my update of Windows (which is set to auto-install every day without any special authorization) DO NOT to INSTALL ALL the DRIVERS...". Who does not at all any H2O. Why I set the update I have described and then send it to not do very well the tasks he would have apparently if necessary to update? If anone can begin in any sense of the madness, I really see how it was me that I screwed up over and over again. Thanks to all of you who have really tried to help me. At this point, I decided to save my $ for a refurbished MacBook Pro and pretend this never happened. SLO

  What you're missing is in the hands of the manufacturer of computers, OEM, not Microsoft Windows OEM support.

  Microsoft support is more oriented to businesses, not individuals, and $99 fees to home users...

  Forum support is much better than Microsoft or any other company could never muster anyway.

• Cannot get Windows 7 homegroups to work properly. Double-click a shared library on another machine in the residential group doesn't.

  I just bought a new laptop with Windows 7 on it, so I decided to try the new homegroup in Windows 7 feature.  I activated the homegroup on my desk and apart from the music, photos and videos.  I then joined the residential group with the new portable computer using the password provided by the office shared libraries and the same 3 homegroup.  All appeard to put up correctly, but I can't browse libraries shared each machine to other machine.  I have the Homegroup and click on the other machine and I see 3 libraries, but when I click on any one of them does nothing.  This happens on both machines.   The only way I can get the residential groups to work is to first go to the other machine and provide credentials on the other machine.  After doing this, the homegroup files begin to work.  I was under the impression that the homegroup password was all I had to have access to all shared folders with the homegroup, but the only way I can get the homegroup to work is first authenticate itself to other machine using a user name and password.

  The two machines are configured with the following:

  • Network discovery is enabled
  • File sharing and printer is enabled
  • Public folder sharing is on
  • Streaming Media is on
  • File sharing connections is configured to use 128-bit encryption
  • Password protected sharing is on
  • Homegroup connections is set up to allow Windows to manage.

  I came across this forum because I had the same problem today. Real quickly, I have two laptops, one running windows 7 Home premium 32-bit and the other runs windows 7 Professional 32-bit. I have comcast for my internet provider and their cable modem attached to my belkin wireless router. I don't know if my fix will work for someone else, but it worked for me, so this is.

  1. unplug the router cable modem wireless
  2. connect the router to one of your computers using an ethernet cord
  3. open a web browser and type in the IP address of the router in the Web page bar (as when you type hotmail.com to go check your email). Mine is a belkin so 192.168.2.1 has worked for me.
  4. the control of the router page should open, and one of the options should be to reset factory settings, do this.
  5. DO NOT CONNECT THE ROUTER TO THE CABLE MODEM
  6 configure the router in the same way that you did when you first installed the router, but just to be sure, I used another name for the network
  7. Once you have the password set up and named network you can disconnect the ethernet cable.
  8. connect to the new network without wire of each computer (just like when you connect to a wireless network) choose House (rather than work or public) for the network location.
  9. at this stage my homegroup didn't work, if it is not there for you, you may need to set up the homegroup in Control Panel.
  10. once the residential group is working the way you want to connect the router wireless to the modem cable and check to see if your internet connection is working by opening a web browser and go to any old site
  Hope this helps!
  Cameron

• Multimedia file sharing only works if the two devices are connected using the same protocol

  So I'm frustrated!

  I spent an hour trying to get my Windows 7 computer to share my music with my XBox 360. I have two machines on my network, one connected by Ethernet to the router and the other connected by WiFi. I tried everything I could find online to get the WiFi connected machine appears in the "Music Player" on my XBox system - follow all sharing, make sure that my router has UPnP, restarted a bouquet of services, etc..
  Nothing! During this time, my machine connected to Ethernet was watching me in the face. He has appeared on the XBox without problem. I started to compare the settings on both machines and found no difference.
  Then I remembered, boredom, I had setting up WiFi sync for Windows Phone my wife. In fact, it was this session of troubleshooting that lead me to put this machine on the WiFi in the first place! Seems to set up WiFi sync, Windows Phone and the target of the machine must be, not only connected to the same network (obviously), but for some reason any the $ @$ crazy, both connected by WiFi. I just connected this computer by WiFi - not happy, a faster speed with my wired connection - and immediately fixed the problem itself.
  Then, remembering that, I moved my XBox WiFi network and - presto - my second machine appears without a problem.
  My question is... WTF! ???
  This is ridiculous - this is the same network! Why things must be connected using the same protocol?

  Hi, Edward Petersen,.

  Please contact the Microsoft community. I'll help you solve the problem with sharing music using media sharing.

  Some routers isolate the cable connections and wireless, you can check if you have the option in the configuration of the router to share media

  If the problem occurs, you can contact the router manufacturer for assistance.

  Hope this information helps. If you need help with Windows, simply reply that we will be happy

  to help you.

• Hello. I'm having trouble installing my Photoshop CS3 software. I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system

  Hello.

  I'm having trouble installing my Photoshop CS3 software.

  I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system is "Microsoft Windows 7 Home premium 2007 - with updates added.

  The version of photoshop that I have is 'Adobe Photoshop CS3, 2007. I installed Photoshop CS3 which seemed to install properly. I activated the dics and inserted the serial number. Activation complete. I had a problem with the registration with the following message through "a problem has been experienced so he was trying to send information on the internet".  I had a problem with look at a. CR2 file but I got a converter of Microsoft 'CameraCode '. I can use Photoshop software. I can't use a software link with Photoshop CS3 I was using before. It's "NIK software - Silver Efex Pro". This means that on the section "filter Photoshow. Can I use the software, but it does not save the changes I made. When I turn off the computer Photoshop CS3 is deleted from my computer. I got LIGHTROOM but software that works very well.

  The summaries. I can load Photoshop and use and save the changes, but when I turn off my computer the software is removed from the hard drive. But I can't get the link software - Nik software - Silver Efex Pro. Please can you advise me what I should do to get my software working properly again.

  Thank you.

  Keith Fernandez

  Once the software is installed, it will not be removed under normal circumstances.

  I do not know if your computer is still infected and it is removed or the problem is that you can't 'see' photoshop' but it is always installed.

  to verify this, check the installation directory and check its size on your hard drive.

• Hello. I'm having trouble installing my Photoshop CS2 software. I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system

  Hello.

  I'm having trouble installing my Photoshop CS2 software.

  I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system is "Microsoft Windows 7 Home premium 2007 - with updates added.

  The version of photoshop that I have is 'Adobe Photoshop CS3, 2007. I installed Photoshop CS3 which seemed to install properly. I activated the dics and inserted the serial number. Activation complete. I had a problem with the registration with the following message through "a problem has been experienced so he was trying to send information on the internet".  I had a problem with look at a. CR2 file but I got a converter of Microsoft 'CameraCode '. I can use Photoshop software. I can't use a software link with Photoshop CS3 I was using before. It's "NIK software - Silver Efex Pro". This means that on the section "filter Photoshow. Can I use the software, but it does not save the changes I made. When I turn off the computer Photoshop CS3 is deleted from my computer. I got LIGHTROOM but software that works very well.

  The summaries. I can load Photoshop and use and save the changes, but when I turn off my computer the software is removed from the hard drive. But I can't get the link software - Nik software - Silver Efex Pro. Please can you advise me what I should do to get my software working properly again.

  Thank you.

  Keith Fernandez

  Hi Keith,

  You won't be able to re - install using the discs and the number of series that you used initially, but we have a solution.

  The activation for more server CS2 is no longer in service. For this reason, we did a version of these titles of software available that doesn't require activation. This is for users who already buy the software.  For more details and specific links for the software, please see the following link:

  Activation server stops for Creative Suite 2 and Acrobat 7 product Macromedia

  Instead of your old serial number, use the one shown next to the download link: download Acrobat 7 and CS2 products

  Guinot

• Message: Shared spreadsheets cannot be changed when the number is offline now

  I just updated to IOS10. I can open all other spreadsheets in numbers (shared and non-shared) bar one when I get the above message.

  Locations - iCloud drive

  Hello babciax2,

  Thank you for using communities of Apple Support.

  I see that you are not abel to open a Numbers spreadsheet and get the error in quotes. This sounds like this document is defined for collaboration. Collaboration for numbers is explained in the following support article: collaboration for Pages, Numbers and Keynote

  This section describes what you see:
  

  Change when you are offline

  On Mac and iOS, you can only open a shared document when your device is connected to the Internet. If you are not connected, or if you switch to offline mode, all working, the application displays an alert asking if you want to work on a copy of the document offline.

  Best regards.

• When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  The iPhone's battery is fully charged?  Otherwise, load it, and then try again.

  If it is busy, go in recovery mode as explained here.  You may need to try to get into the mode of recovery once more to succeed.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• Firefox 17.0.1 will not correctly display on my laptop. I had to revert to the last version in order to write this!

  I had to revert to the version 16.0.2 - works perfectly - as 17.0.1 is virtually unusable on this laptop. I've never had this problem before and I've been using Firefox for many, many years. It is basically a graphical problem. I can't see my homepage if my list of bookmarks in the sidebar - this is only in black. But if I close it, the page renders OK. If I try to change pages it seems to be OK. Then, as soon as I try to open my favorites again the black page. If I try the black part of scroll I can see the page in the background, but as soon as I stop scrolling, it goes black again. If I try long enough, the page will make it sometimes, but as soon as I try to do something on the page it blocks will disappear and then come back if I move the mouse around it. - And the variations of this kind of nonsense. It's a very difficult thing to describe.
  I tried restarting Firefox with my addons disabled and that seems to fix the problem, but I don't know which is the cause because when I restart with the new addons activated in order to stop their individual page display problem makes it virtually impossible to do anything, because I can not browse properly.
  I came back to 16.0.2 permanently for a while, but every time I try to reinstall 17.0.1 the same thing happen everywhere. of course Ff guard ask me who there is a newer version and I want to install etc., due to problems of security etc, but seems not be any point, unless someone out there has any suggestions as to what is causing this problem very annoying and frustrating.

  Hello Onebrow, if you want to not install/update your graphics drivers then try to disable hardware acceleration, clear information in the light of the foregoing, it is link Tylerdowner gave as.

  Thank you