Turn on the mtu on cisco switch and cisco user server

Similar Questions

• Is impossible to turn on the guest account. Cannot create new user account. "The service user profile Service has no logon. User profile cannot be loaded. »

  Is impossible to turn on the guest account.  Cannot create new user account.  After to try one of those and reboot, the icons of account appear, but when you try to use, the following instructions of error present when you try to log in with the new account or comments: "the user profile Service service has no logon.  User profile cannot be loaded. "I looked at the answers to all the previous ones (including the KB947215) and no not to address specifically.  For the most part, they seem to assume that there is a guest or a new profile in the first place...

  The system is Win 7 Pro 64-bit with all available updates.  I can't say when the last time that the guest account has worked (rarely used) and just found out I can't do new additional user, accounts trying to solve the problem of account of comments... so I have not tried to enter Safe Mode and do a system restore , because I can't yet identify a useful restore point...

  There are no entries in the registry for a guest or a new standard user account.  The registry entries for the three accounts normal-quickly (2 x admin, 1 x level) seem to be appropriate.  Watch register computer/HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  S-1-5-18 = system profile

  19 = local service,

  20 = network service,

  21 long numbers + 1004 plus User1 (admin),

  22 long + 1005 plus 2 user (admin),

  23 plus long + 1006 is user3 (standard,

  and no comments or additional profiles appear.

  C:\Users includes

  All users,

  User1,

  User3,

  By default,.

  Default user (which is inaccessible for me, even as an administrator),

  Public,

  User2,

  No guest or additional profile appear.

  All except the default user (I can't open) seem to have the appropriate, NTUser.DAT files although I don't know how to check for corruption.  Having both a default value

  and a default user folder seems hokey.

  I think I understand instructions how to fix or remove a corrupted profile, but that does not apply to the guest account or profiles that do not exist.

  Help?  Ideas?

  This message contains the strange solution.

  [Plan B - I found one thread where one user said that the same symptoms of the problem that you experience this problem solved]

  - - - - - - - - - - -

  Plan h - while another user said that it was caused by a file Windows Live problem

  This is the thread I can not create a new user account (Windows 7): the user profile service service doesn't have the logon

  You find it difficult to follow the thread as it's long and reported problem by different people to confuse it and there is also a bit of bickering [long filaments often end up being quite incomprehensible].

  ..., See references to the event viewer in the middle of page 4 and Windows Live we [at the bottom of page 2 more on page 3].

  I see not the logic of the any of those things, but if one of them do things long enough that you are trying to create new accounts that works, you will know how in the future until a proper solution is found.

  This is the useful part where this user has tested the solutions proposed in this thread linked above: -.

  This has proved to contain leads to a difficulty.  Have to admit, when I read everything the first time, several days, I did indeed find it confusing and even the parts that I "heard" (sorta) does not appear to be related to my symptoms.

  It turns out that the answer of JDMICHAL May 17, 2011 contained this:

  (1) C:\Users\Default\AppData\Local\Microsoft\Windows open live
  (2) this directory has two subdirectories with a single file of each. Go into each directory and apply the following:
  (a) make a right click on the file, open the properties.
  (b) click the Security tab.
  (c) it will issue a message: "to continue, you must be an administrative user with permission to view this object's security properties. Would continue you? ». Click on the button continue.
  (d) click on the Add button...
  (e) ' everyone' type in the box at the bottom of the dialog box. Click on "check names"; It should be emphasized the "everyone". Click OK.
  (f) ensure that the new "Everyone" entry "read" and "read & run" check under the column "allow".

  After doing this for two files, attempt to connect to the account. He must undergo.

  The procedure (bascially) worked... Although the different answers on my system differed slightly along the way (perhaps due to the slightly different versions of Win 7?, because I was already logged in as an administrator?).

  In any case, "Everyone" with the read and read/execute permissions adding to these two files seems to have done the trick:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  Thank you for leading me to this!

• Remove temporary files from the local disk c/documents and settings/user/localsettings/temp name

  Remove temporary files from the local disk c/documents and settings/user/localsettings/temp name

  By definition, this folder should contain only the elements you don't need.  If I understand correctly, this temporary folder is a place where temporary files are stored during program facilities and the facilities.  However, I have seen references other sites to help saying some programs can store folders and files.

  I do my own temporary file elsewhere, name it accordingly and move all the files in the temp folder to the new folder. Use your computer normally for a while, and if nothing complains about missing files, you have a good indication that none of the moved files are important and should be safe to delete.

• My PC does not connect to the Internet, a window opens and says DNS server does not respond.

  Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

  My PC does not connect to the internet, a window opens and says DNS server does not respond.

  Hello

  Follow the steps in the article mentioned below and check if it solves the problem:
  http://support.Microsoft.com/kb/314095

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Cannot turn off the LEDS on Cisco Aironet 1141

  I am trying to turn off the LED on a Cisco Aironet 1141 p/n AIR-AP1141N-A-K9.  It is a standalone AP and the CLI I publish this command:

  turn off the display of #led AP (config)

  The light does not go out after you type this command.  If I "run" it appears in the config so that the order has been accepted.  Is there another way to turn off the LED?  I'm under JA1 IOS Version 12.4 (21a).

  If you have the AP 1141 under warranty, you can send an email to [email protected] / * / PA serial number and they can post you the picture ask you.

  You want to say "Thank you"?
  Ne. Just note the useful responses,
  It is more useful than 'thank you'.

• How to turn off the flash on a 600ex and still use it to control unit main radio send?

  I have several 600 EX - RT flashes.  Currently, I don't have a ST-E3-RT.  I thought that I read somewhere that you can turn off the flash in one of the of the 600EX and still have it control others.  I would like to be able do this by using a 600EX in my claw with the Flash disabled in Radio mode, controlling the other 600 EX flashes.

  Is this possible to do?  If so what are the steps in specific menus or what is the specific manual page, I need to go to in order to know how to turn the flash on the master to the wide and still, it works like the sending unit for the other 600 in radio mode.

  Thank you

  Jason

  Menu of your camera has a menu option for flash (the specific wording depending on the camera model).

  Enter this menu and tell him to 'disable' the flash.  This will allow the flash to do everything he does (for example the focus-assist beam will work, the radio will work, etc... but he fires the flash to take pictures.)

• Automatic shutdown of the time does not work. I got him to turn off the computer at 23:00 and it doesn't. Help!

  It's not I the children side to turn off the computer at 23:00.  They are not allowed to use the computer after that but it does not turn off as before.

  Hello

  1 did you changes to the computer before the show?

  2. are you referring to Parental control?

  Method 1: Read the following article and try to set the parental control again and see if that helps.

  Control when children can use the computer:

  http://Windows.Microsoft.com/en-us/Windows7/control-when-children-can-use-the-computer

  You can also check:

  Set up Parental controls:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

  Method 2: Restore the computer to a date when it was working fine.

  Reference:

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

   

• Firefox loses focus of the window when I switch to Windows user accounts

  If I have Firefox running in a single Windows account and switch to a different account (where I do not use Firefox) and then back to the account where Firefox is running, and I have to open a new window in Firefox, Firefox loses focus (in other words, I can't use the new window unless I first bring back highlight on the desktop.) ... and, no, it's not a Windows problem, as another program will include an expected. It's just Firefox that does this. Very annoying, btw.

  [Oh and mods, please reopen my previous thread, I wasn't done with it, thank you.]

  I tried Flash 15 and blow me over with a feather, it works! Adobe * actually * fixed something to change. * faints *.

• How to turn on the lights on a Satellite P300-23V + user guide on CD

  I wonder how you turn on the light a SATELLITE P300-23V?
  I mean the light that show a bar above the touchpad and and the name of the Satellite is too bright.
  In the manual it says how to do it with the slim remote control, but it's not on this model.
  I know I could turn on the light with a combination of keys before, but now I can't find it now.
  I updated to Vista 32 bit to Windows 7 64 bit and maybe some features of Thoshiba was lost what to do?

  I also lost my CD with the most extended usage guide. I searched the download area, but it doesn't seem to be here for download.
  All Tips how to get it?

  with the remote?
  Go to BIOS settings and in advanced option there should be an option for lighting.
  Please try it and tell me if it works for you.

  S user manual download go to support portal under http://eu.computers.toshiba-europe.com/innovation/generic/SUPPORT_PORTAL/ and scroll down to download. You will find the option for manual Toshiba of the user.

• The implications of Cisco Telepresence server operation mode

  I have a CISCO Telepresence server that is currently running in mode managed locally, if change you it remotely and add it to my TMS, will I lose all my permament locally created conference rooms? (be they get deleted?)

  Thank you!

  HI Douglas.  TS blade didn't need to be mode remotely managed so that it can be managed by TMS.  This mode is used for the management as a conductor Telepresense.

  When it was presented, was 3.0 TS.

  Release notes:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/TS/release_note/Cisco_Telepresence_Server_Release_Notes_3-0_2-24.PDF

  Page 2 pretty much answer your questions here.

  If your not using a conductor or by using your own program API to use TS in this mode, its better to leave behind in managed mode and add the system to MSD and leave it that way.  This is the normal operating mode if you use the TMS.  Let in managed mode locally, add it to the TMS and you can book etc. against it using TMS meetings.  If automatic discovery is enabled in TMS, permanent meetings should appear in the CCC.

  I hope this helps.

  VR

  Patrick

• is it safe to delete the files in c:/documents and settings/user/recent

  I have a load dupe files shortcut in c:/documents and settings/user/recent folder... is it safe to delete them?

  Yes, it is completely safe to remove them because they are just useless shortcuts - is useful if you frequently use "Recent Documents" on the Start Menu.

• Change the default file for downloads and some user folders locations

  A big thank you to all who have helped me, more recently DAXnnn and try * 3.  I come once more in need with questions.  For the cleaning of my boot partition before cloning to a smaller SSD, I'm getting cause folders USER My Documents, my music, my pictures, and my videos to be moved to a different physical disk drive.  I also want to do the same with the downloads.  After trying to use MKLINK (without success) and the location of the tab in the properties for folders (in vain), try * 3 put me on editing the registry.  While I did not yet any change, I followed his instructions to look under HKEY > CurrentUser > software > Microsoft > Windows > CurrentVersion > Explorer > Shell user folders and confirm watch registry.

  What I found is that the actions I took before running into problems using the options of localities had caused registry entries updated to show the new names of path of My Documents (under personal in the registry path) and my music.  This leaves downloads, my pictures, and my videos to be changed before the data transfer of the boot partition to reduce before cloning.  I discovered the writings of my pictures and my videos contain a variable %UserProfile% then the names of folders.  My assumption (often a wrong thing to do, I know) is that I can change these entries replacing %UserProfile% with the name of path, including the drive etc letter describing where I want to move the old data and write new data and changes.  IS THAT CORRECT?

  Regarding downloads, what I discovered is the second entry in HKEY > CurrentUser > software > Microsoft > Windows > CurrentVersion > Explorer > User Shell Folders, below (default) is a name {374DE290-123F-4565-9164-...}, displayed once indicating the value of % USERPROFILE%\Downloads.  Using my penchant for the skip logic, I assume that I can edit this article replace the value data with the path name where I want future writing downloads.  IS THAT CORRECT?

  If I can confirm or correct information, I am very close to stripping the size of my partition boot prefixed operation clone to place what's left on my SSD.

  Thanks to all for participating in such a large forum community!

  HR

  Yes you are right.  If you want that your download location for be moved, just change:

  Old: %userprofile%\downloads

  New: E:\OtherDrive\Some Windows\

  This will make all your downloads stored in the folder 'folder of some '.  Just be sure to include a folder name and make sure that this folder actually exists.  Make sure not to say a disc like E:\ or all your documents could get dumped at the top of this reader, rather than in a folder.

• Why do we establish oinstall under the main group of oracle and grid users?

  IM and RDBMS version: 11.2.0.4

  Platform: RHEL/OL 6.5

  Why do we set oinstall under the main group for OS proprietary oracle software and grid?

  I would say "The Central stock" is the watchword here.

  orainstall is actually called the "oraInventory group." Member of (oracle and grid) users who belong to this group must read, write and execute privileges on the directory Central inventory which will serve as a catalogue of all oracle related software installed on the server. Whenever users put oracle or grid to level, the patches from the software they own, they should be able to update the respective news in this catalogue.

• turn off the sound when press menu and back points

  How can I activate this sound?

  @Allanon45

  Settings > sounds & notifications > other sounds

• When I try to use 'Hello', I get a message that it is not compatible with Firefox ESR. How to change that. I have the latest version of Firefox and a user.

  I'm not able to use Firefox Hello. I get a message that it is not available in versions of Firefox ESR. How can I change my version of Firefox? I'm a home user and when I click on the link update my personal version of Firefox I get a message telling me I have the latest version. So, I'm stuck. I also used to have a link to beta "Hello" when it first came out (he was working at the time). This link is now expired. Can someone help me understand how to establish access to 'Hello '?

  Hello will also work where you have configured firefox to run in permanent private browsing mode ("never remember history" in options > Privacy panel).

  Privacy, historical settings of navigation and-no-track