TV 2 to store don't play & sees all files

Similar Questions

• E280 V1 using RockBox sees the chip of the 4 GB SDHC but don't play MP3 on the chip

  Greetings:

  I have read many postings in this community and have a problem with my V1 e280 that I saw an ad for, although there are a lot of comments, so I apologize if I'm rehashing old stuff:

  I have pair of Sansa e280 V1 units which work very well with the original Sansa (v.18a) and also the RockBox OS (v. 14975 - 071004).  I recently bought a pair of Sandisk 4 gig chips Micro SDHC, which I am aware only work with RockBox.  Since I can connect to my computer Windows XP SP2 only my e280 using RockBox and since any bigger piece that 2 gig will not be recognized by the operating system of origin of the Sansa, there is no way both connect to my computer and also to see the concert 4 chip at the same time , so I downloaded the MP3 files in the 4 GB chip by plugging it directly into my computer.

  By the advice of this community, I connected my e280 to my computer and then deleted the folder System / Data.  Then I plugged in my 4 GB chip on the e280 and started Rockbox.   Then I went settings/General Settings/database/Initialize now and initialized and restarted the e280.

  The e280 sees 4 GB (System/RockBox Info) including how chip it is occupied by the .mp3 files, but when the new database is formed, he sees not all in 4 GB chip .mp3 files, only the .mp3 files internal to the e280.

  If I try to update the database (settings/general settings/Database/Update Now), then I get the standard "update in the background", and if I then go on RockBox/database and look at recently "added," I get «from the search...» 0 found ()", and shortly after, ALL database entries disappear!   I can get them by Initializing and restarted again, but still without the content of the 4 GB chip.   What happens here?

  I bet that I'm missing a few simple steps - can help you?

  Thanks, Airpilot

  Howdy Bob and mark:

  First of all, thanks to you both for your help.  It turns out that the two of you helped in the solution.  Bob said to check the id3 tags.  Mark asked that records on the 4 GB chip have been seen, or the files were also well seen.  Those answers gave me a break and pushed me to do the following:

  1. all files (5 of them, each 450-500 MB, streaming audio) were loaded on the root of the chip 4 GB as .mp3 files and not in a folder under the root.  I pulled the chip and created a folder in which the five files were placed.  BTW, I use a chip capable of Kingston FCR-HS219/1 SDHC drive to access my 4 GB chips.  When I reloaded and reset my e280, I could see the folder and files.  In the FILES, they are listed in the folder.  In the DATABASE, they are listed as .  This led to the realization that:

  2. my flies streaming had no id3 tags!  I agree that this has not done a difference when searching for these files in the FILE list, the fact that they had to read labels meant that I missed them, since they were lost in the list of the other files not marked in the internal memory e280.  Assigning these files id3 tags, transferring to the e280 and then the initialization of the database show them correctly in the list database.

  BTW, my 4 GB chips are formatted using FAT32.

  THANKS to each of you for your suggestions.   This problem is solved.

  Dave (Airpilot)

• Can I download an application on both the app store and google play? and if yes how can I do?

  Hello, I have two questions: can I download an application on both the app store and google play? and if yes how can I do?

  I have yet to start working on the apps, but currently, I bought a book called "Android programming: the Big Nerd Ranch Guide" to help me create an app and the IDE used on this book is the Android SDK.  And I was wondering if I could download an app on the google game store and the app store using the Android SDK and not Xcode.

  Xcode is 'official' Apple development environment as Android Studio is the Android development environment.  Applications for Apple devices are usually written in Swift or Objective-C, while those for Android are written in Java.  Both also use different APIs and execution environments, and even if they do pretty much the same things, they are quite different in the way they carry out their.

  It is possible to use a common language and an IDE to build native applications (RubyMotion and Novell are some examples), but separate applications must be built to different platforms in order to use the appropriate GUI environments.  You can also wrap web technologies such as HTML, CSS, and JavaScript (App Inventor and PhoneGap are some examples), but these do not normally use the native API and tend to be lower than native applications.

• I was deleting files and delete something that now I can't play my music files... and my Youtube videos are no longer in sync with the songs. HD playler / Flash...? What I've done. ? How do I get it back

  I was deleting files and delete something that now I can't play my music files... and my Youtube videos are no longer in sync with the songs.  HD playler / Flash...? What I've done. ?  How do I get it back

  Hello

  As you are not sure of what you have removed for cause of your problems, I suggest that do you a system restore to a date before you start deleting these files, and then start carefully again, before to remove any file of dual control.

  How to make a XP system restore:

  http://pcsupport.about.com/od/fixtheproblem/HT/system-restore-XP.htm

  See you soon.

• I have a laptop HP 6210 with 8.1 Windows... and videos don't play ESPN youtube etc.

  I have a HP - AMD A4 - 6210 Laptop with Windows 8.1... and videos don't play ESPN youtube etc.

  Hello

  Try a new installation of the plugin flash/ActiveX as follows.

  First, download the Flash uninstall utility on the link below and save it in your downloads folder.

  Flash Player Uninstaller.

  Once the download is complete, close all the browser windows, open your downloads folder and run the program uninstaller.  After this has completed, restart the laptop.

  When windows has reloaded, download and install the latest version of Adobe Flash. Note: You can deselect the option to include McAfee Security Scan Plus before downloading.

  When the installation is complete, restart the laptop.

  ***************************************************************************

  If the above is not correct the problem, try the following.

  First of all, download and run the uninstall program of Shockwave on the link below.

  http://fpdownload.Macromedia.com/Get/Shockwave/Uninstall/Win/sw_uninstaller.exe

  After this has completed, restart the laptop.

  When windows has completely recharged, download and install the latest version of Shockwave on the following link.

  http://get.Adobe.com/Shockwave/

  Once again, after the installation, restart the laptop.

  Kind regards

  DP - K

• No noise in Mahjong Titans don't play more - Windows 7 Pro

  No noise in Mahjong Titans don't play more - Windows 7 Pro

  I had my PC Windows 7 Professional for almost 4 years. Recently the sound has stop working on the integrated - Mahjong Titans game but the game itself works as usual.

  Work system sounds and I have checked my settings to make sure that the sounds are on.

  Does anyone have an suggestions on how I can solve this?

  Thank you

  Cyndi

  Hello

  Try the steps.

  I suggest you check that the default audio device is correctly set
   
  1. click on start, type Sound in the box to start the search.
  2. click on sound in the results of search at the top of the start menu.
  3. click on the tab reading notice the check mark next to the default device. For most users, the default device is speakers.

  Make sure that the audio settings are configured as expected. Follow these steps:

  1. on the playback tab, select the playback device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect.
  When you are finished, close this window to return to the previous window.
  2. on the playback tab, select the playback device, click on configure and make sure that the configurations are set correctly.
  3. If the sound settings are well positioned, you are using speakers as the audio device and your speakers are already set as the default device, go to method 5 now.
  4. Select the audio device you want as the default audio device and then click on set as default.
  5. click OK to save your settings and close the sound dialog box.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Verbatim Store ' Don't Go external hard drive - unable to connect to

  Help

  I can't connect to my Verbatim Store ' Don't Go Hard Drive - USB 3.0 - 1 TB external hard drive. I run Windows 7. In computeradministration he appears white and tells 'Help' me, I have to initialize it. But when I try, I get the message (in Danish): Datafejl (cyklisk redundanstjeck).

  My new external hard drive is gone forever?

  With greetings

  Stig Christensen

  As far as I can see that it means that the player has a problem, return it to however you bought.

  Although you could test it on another PC first, to see if its OK on the other PC

• Premiere Pro: Don't plays no chronology, not made the full sequence, stalled on an image

  2013 iMac / / 10.9.3 / / Premiere Pro 2014 (last updated) CC

  I was edit a project for a few days, and he started just send me questions about my last run through it, before exporting.

  I've dealt with a lot of problems with PP before, but I honestly don't know even what is happening right here. I can't identify the problem. It seems to be a number of things. I started with the update of PP and CUDA. Nothing. So I continued.

  (1) I had problems of rendering, so I thought that I would like to remove the preview files and start from scratch. When rendering the entire project, it get to about 60%, then stop and hang there. After five minutes of watching him, I leave PP. Even if it would look as if she left, he would always run in the activity monitor and the little light below in the dock would be, so I have to force quit.

  (2) it's weird because the place where she stops rendering is the sport where, if I scroll the timeline, the program window will freeze on a picture. So no matter how I move the playback cursor, it will appear not all executives. Neither the sequence will play at all after that. So, I leave again.

  (3) I went back to another project and all rendered what he - fine and dandy.

  Why it gives me such a problem? If someone needs something else for me to properly diagnose this, please just tell! Thanks for the help.

  Sorry ' end offset in time. Our new company has begun its first major project and as the geek tech for the photo-la part of it, been a little busy.

  So there is clearly a problem with the project receiving file corrupted, but... when it hits the images he choked on before, she choked again. There is some sort of glitch here that has to with PrPro interacting with these files. I was wondering if a header file somewhere has a figure that may confuse PrPro or something? I remember a few questions of a similar nature people possibly involved sending a little unpleasant images to an Adobe employee, which sting through the scenes and found something that was not exactly what he might better have been in a header or something. Altered, PrPro & footage loved each other once again, everyone else happy. But it's the kind of ish that we need experience... and I have none.

  He had moments also where people have divided a project... right on the edge of the problem. Three pieces in its projects, the separate project files. First part of 'good' and render out as a separate project. Next project, the images "murky" who worked in itself, as again his own project and returned on. Then the part final & as serene, even once. I heard about these two taking those in QuicktimePro (if appropriate codec) and unite in one continuous piece, I also heard people who took PrPro three projects that had been made to separately (if I remember one was probably about six parts, a long guy & complex) and brought these rendered parts back to make a final project with everything in it. Actually, there are a number of those who have shared their most important projects into large pieces, which is done separately, then combined in a final project of PrPro for final polishing at their normal work habit.

  Best wishes...

• Don't play do not continually album for ios10

  I've just updated to iOS 10.0.1. When I want to play an entire album, the player plays the first track right and then continually plays the first track anywhere. I have to manually switch to the next track and so on to play the entire album. Is it possible for an album to play at all times automatically?

  Hi peraltafbyahoo,

  Thank you for using communities Support from Apple!

  I see in your message when you try to play a song through the music app, it covers just the song rather than continue on. This sounds like the repeat button may have been activated. You can check this by doing the following:
  

  Control playback. Tap a song to play and show the MiniPlayer. Tap the MiniPlayer to display the now playing screen, where you can do the following:

  

  Repeat steps. Glisser slide upward, then press on to repeat an album or a playlist. Double click to repeat one piece.

  Play music

  See you soon.

• VOB files don't play no not in Windows Media Player

  I have several DVD that have been copied to my hard drive.  When attempting to open the .vob files, I use Windows Media player.  WMP opens, then closes while PowerDVD DX opens.  Nothing happens at this point.  Looking through the forums and search on the internet I can't find a solution that works.

  Hello jtrall, welcome.
   
  It seems that WMP (Windows Media Player) is given to the task of playing the. VOB to PowerDVD files because of several possible reasons:
   
  1 PowerDVD is set as default program for reading VOB file
  2 WMP cannot find a proper way to play the VOB file
  3. missing Codecs or other program incompatibilities
   
  In order to diagnose the problem and find a solution, we will need to know:
   
  1A Windows Media Player never been able to play the VOB files before?
  2. what version of Windows Media Player are you running?
   
  You should be able, as a temporary workaround, use PowerDVD as the DVD playback software. If you start PowerDVD, and then click File > Open (or something similar) you will be able to select the source of the DVD files that are VOB files stored on your computer.
   
  Send us the above information and we can go from there
   
  Thank you!

• don't play only in the preview of captivate project SWF files

  I tried to import a file .swf product of Camtasia 6.0 in a captivate project 3.0, after doing so when I'm in any .cp with files .swf in them and I try to get an overview of the project files .swf will not play. All the files published .exe will play, as do the .swf files displayed individually simply not to Captivate. Any ideas?

  I found the answer - I had upgraded to Flash 10 and it is not compatible with Captivate 3. I uninstalled Flash 10 and installed Flash 9 and now I can listen to extracts projects which have files .swf in them.

• Windows Media Player in vista has stopped playing my video files (.) MOD extensions)

  My Windows media player recently stopped playing my video files that have a. Extension of MOD, although the audio is not yet once the video is crushed. When the video freezes a computer bubble lets me know that the driver igfx has stopped working and then recovered.

  I spent many hours trying to solve this problem. My graphics card is an Intell chipset and it is up to date with his driver (I checked), the motherboard is an ASUS and this is far too - I checked. I ran an auto fix and that disabled four codecs, but the problem persists. I have run the sfc / scan now processes at the prompt as an administrator and it came clear.

  The problem is driving me crazy! can anyone help? When I play the video on another computer that works under XP, I have no problem.

  Thank you

  John.

  I fixed my own problem finally - I took this advice:

  http://answers.Yahoo.com/question/index?QID=20081217192010AAFUBeK

  and installed "essentials pack windows media codec 3.2 [32 bit], this source http://www.snapfiles.com/get/essentials-codec-pack.html.

  Job done!

• Play a xls file.

  Someone sent me a file xls on windows vista, but I don't know how to open it.

  You do not play a .xls file.

  .xls is Excel, a part of the office.

  Download and use it to open it:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1CD6ACF9-CE06-4E1C-8DCF-F33F669DBC3A&displaylang=en

  Excel Viewer

  Open, view, and print Excel workbooks, even if you don't have Excel installed. This download is a replacement for Excel Viewer 97 and all previous Excel Viewer versions.

  And here is a link to a set of free office of Applications:

  http://www.OpenOffice.org/

  How to set file Associations:

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  How do I... Change file extension associations in Windows Vista?

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Media Player will not play. WMA files

  Windows Media Player will not play. WMA files, but all the rest that he will play codecs for.

  What is going on?

  Reset Media Player and accepted the default set and makes no difference.

  Still will not play. WMA files.

  This has happened on three different machines using hundreds of different. WMA files and none of them will play.

  All of these files were torn to the folder of music with Media Player.

  SFC/scannow seems to have done the trick for a user here. See:
  My Window Media Player won't play WMA files-Microsoft Community
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/my-window-Media-Player-wont-play-WMA-files-anymore/0fb1b162-01fa-4a30-B551-6a09ad8ae590

• Windows Media Player cannot play the protected file. The player has detected that the connection to your hardware might not be sure

  I just bought the New Avengers movie with the digital copy. I moved it and now I can't watch it. I have "Windows Media Player cannot play the protected file. Drive detected that the connection to your hardware may not be safe. "when I click it. What now?

  Hi Jason,

  Thanks for asking this question to Microsoft Community.  I'll try and help you resolve the problem; However, I will need to ask you a few questions.

  Are you able to play other movies without any problem? Have you done a recent software or changes to the material on the computer?

  Here is a link with some good steps. Go through it and check if it helps. Also check out this article and see if it helps.

  Also, see the steps in the article and see if it helps.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.