TV-video not all appear on television with Qosmio F10

Similar Questions

• with Premiere Elements, how share (export) part of my video, not all this?

  Using Premiere Elements, how share (export) part of my video, not all this?

  carol2r

  What version of Premiere Elements you are using and on what computer operating system is running? For now, I will assume first elements 12 on Windows 7, 8 or 8.1 64bits.

  1. place the grey bar activities tabs so that they cover all the timeline content that is to be exported.

  To position the grey legs... Move the indicator of chronology for the beginning of the segment to be exported, you hold down the Alt key, press the [key left hook

  .. [then move the indicator in the timeline to the end of the segment to be exported, you hold down the ALT key, press the right bracket]

  2. the other necessary part of this task is for you to have a check mark next to the option "Share activities Bar only" as part of the export. See publish + share/computer /... Most have the option "Activities part only", some do not.

  Don't forget, you need 1 and 2 of the above to make it work.

  Please provide more details for fine adjustment of the replica. If screenshots are needed, I will post them.

  Looking forward to your follow-up to the top.

  Thank you.

  RTA

• I'm not all sounds. Have with IE, but cannot get sound in firefox

  I'm not all sounds with Firefox. I have the sound by using Internet Explorer.

  Hi bholmes,.

  Have you looked at the article Knowledge Base, what to do if Firefox will play all of the sounds? There are many good advice on troubleshooting in there. You might have its just accidentally disabled for Firefox.

  There is also a chance it's a plugin problem. If the first article does not help, take a look at common audio problems and graphics issues.

  Hope this helps!

• pavilion23: new HP Pavilion 23 videos are all green, no problem with audio

  Brand new HP, videos are all green, although there is no problem with the audio.

  Hello

  If you are using Internet Explorer, try the following.

  Open an Internet Explorer window.

  Hold down the alt key and press x, and then select Internet Options.

  Select the Advanced tab, enter a check mark in the box "made software use instead of GPU rendering', then click on apply then Ok to save this change.

  Close all the open Internet Explorer Windows, then open it again and try to play a video.

  Kind regards

  DP - K

• IM have downloaded on windows 10 software adobe reader DC. Cannot install the update 15.009.20069 - gives error 1635. the drive is not all the functions associated with it - does not seem to download documents - opens in mocrosoft edge despiye moxilla fir

  I downloaded the CD player on windows 10. Unable to install the 15.009.20069 update. gives error 1635. Reader is not all functions available - documents opens on the edge of microsoft despite moxilla firefox as my default browser

  Hi Jacqueline,.

  Please check the steps in the article that Sukrit Dhingra shared with you. If in case the issue is not resolved with who perform a clean installation of drive using the cleaning tool and install offline using. Links provided below.

  Download Adobe Reader and Acrobat cleaning tool - Adobe Labs

  Adobe - Adobe Acrobat Reader DC Distribution

  To set the default on Windows 10 drive, try the steps from here: Reader/Acrobat is not the default PDF owner | Windows 10 threshold 2

  Thank you

  Abhishek

• Transfer VHS video to DVD with Qosmio F10

  Hello
  I really need help, I want to transfer my VHS to my Qosmio F10 videos, edit them and then burn to DVD. I have cable supplied with the machine, more I bought a Svideo cable. I have tried all the ways to connect to their place, but without success. Someone would have a go at describing the steps I must follow to do this?
  I'm not a computer expert, simple language not techno would be appreciated.

  Hi Walter,

  You are looking at a three-step process: -.

  1. connect your VHS player to your laptop (S-Video/s-Video is recommended for better quality imagery, but you'll also need to connect the audio cables from your VHS player to your Qosmio for sound.)

  2. change the captured audio and video using a proprietary software package. You may already have Windows Movie Maker installed, but you can also consider other packages of Nero, Ulead, Pinnacle, Roxio, etc.

  3 burn the project finished on a DVD.

  The whole project can be a minefield, so I recommend taking each step in turn and carefully progressing thanks to gain experience.

  Finally, don't download discouraged by the apparent conflicts between the different pieces of hardware and software. The final result will be very rewarding.

  HTH :-)

• Several problems with Qosmio F10-136

  Howdy

  Having trouble with my F10, which began a few days ago...
  -He can't wake up after hibernation (freeze - black screen)
  -freeze in closin XP (gel - "shutting down... "mssg. doesn't matter if im tryin to shut down the system or reboot)
  -100% by 'system' process cpu usage (start-up time has not changed...)

  Updated the bios, I did format and reinstall OS twice already, problems arise again so I guess it's some kind of hardware problem.
  Maybe the power supply?
  Have no idea...

  Any ideas?

  any suggestions appreciated

  Hello

  It is not easy to say with certainty what the problem is here. You may have updated RAM or something?
  I don't think it has something to with the power supply, but if you want to have a clear answer the cell phone must be controlled by technicians.

  You did the right thing with the new installation of the OS, but if the problem persists, it must be something with the hardware. I hope that you have installed the image of recovery for test purposes.

• Cannot synchronize a turntable USB with Qosmio F10

  I can't sync my turntable usb on my computer laptop qosmio F10.

  To help me only you can get hub manufacturer. If you have any problems with some other external USB devices I guess there is no problem with the hardware, but probably software spirit.

  Boyfriend sorry but I don't see any way to help here. You will be very happy if someone uses absolutely the same device USB and Qosmio F10 and to report on the experiences.

  Good luck!

• My Docs, videos etc all have tags, usually with a green check mark, now with a red exclamation point. Is this a Firefox program?

  These labels may be related to a cloud storage offering?

  Hi woodycoal, these icons are not related to mozilla or firefox products. they may be part of some sort of synchronization for cloud storage tool, but it's a question which will be offtopic in our forums for us probably cannot find an answer to this...
  Thank you for your understanding!

• How to capture movies with Qosmio F10-125

  A few days ago there was a post saying that good news for the capture has been discovered. I think that most of you have read and tried to use it. There was a link in it where all the problems of capture have been resolved. My problem is that this link which was published it has not worked for me and so I'm still with the problem of the capture of all the inputs that mt F10-125 films.

  Can someone help me solve the problem please?

  Hello

  Obviously this link doesn t work more. Check the BIOS settings please. There should be an option called display stretching or something like that. It must be set to enabled.

  Check the programming of the channels also manual and fine adjustment. You can find under Setup menu.

  Good bye

• CPU goes to 100% svchost State takes all the resources on the Qosmio F10

  CPU goes to 100% svchost State takes all the resources. Norton can not find any illegal software. Have tried to list the processes (run... etc.). I get a long list, don't know what to do about this. Anyone out there have some help?

  Hey Buddy

  The same problem here. :( A universal solution is unknown to me but what I do is from the Task Manager. When svchost shows more than 90% of its use I simply stop this stupid process. After having done that, I can use my laptop without any problem and it will not happen again.

  After restarting the laptop, the same thing happens again. I checked some other forums but never found no reasonable explanation how manage this stupid question.

  If someone knows more please let us know.

• I have PS CC 2014 and 7.3 of Extension Manager installed, but not all extensions appear in PS. All are enabled and up to date versions. For example, Adobe watercolor Deputy. Any suggestions?

  I have PS CC 2014 and 7.3 of Extension Manager installed, but not all extensions appear in PS. All are enabled and up to date versions. For example, Adobe watercolor Deputy. Any suggestions?

  Please see the compatibility on each module table because not all will be compatible with PS CC 2014 and therefore do not list in the extensions under this version of PS Manager.

• Not all video/audio, transfer to published film forms

  Hello

  I created a movie in Windows Movie Maker, with a video montage to music at the beginning, followed by video clips (w / their own audio).  He always plays smoothly and perfectly all the way through in the Wondows Movie Maker each time I saw it.  When I select 'publish on DVD', creation of Windows DVD opens and everything seems OK.  When I preview the it, the menu is in tact and works, even showing the parts of my videos in the rectangles 'scenes', but when I play in fact the film only the first video editing with its music games.  The rest of their audio and video clips are missing.  Even if I go through the menu and try to select the scenes later.  All the subtitles, which I had added appear for the rest of the film, but the screen behind them is empty, w / no sound.   I tried to do a recordable CD for my project too, instead of a DVD, and the same type of thing happened, except for a few video clips in the first Assembly is missing too!  I do not understand why some videos gets through but not all.  And what happens to my project of poor between the phases of creation and editing.  Would appreciate any troubleshooting tips.  Thank you.

  Hello

  I created a movie in Windows Movie Maker, with a video montage to music at the beginning, followed by video clips (w / their own audio).  He always plays smoothly and perfectly all the way through in the Wondows Movie Maker each time I saw it.  When I select 'publish on DVD', creation of Windows DVD opens and everything seems OK.  When I preview the it, the menu is in tact and works, even showing the parts of my videos in the rectangles 'scenes', but when I play in fact the film only the first video editing with its music games.  The rest of their audio and video clips are missing.  Even if I go through the menu and try to select the scenes later.  All the subtitles, which I had added appear for the rest of the film, but the screen behind them is empty, w / no sound.   I tried to do a recordable CD for my project too, instead of a DVD, and the same type of thing happened, except for a few video clips in the first Assembly is missing too!  I do not understand why some videos gets through but not all.  And what happens to my project of poor between the phases of creation and editing.  Would appreciate any troubleshooting tips.  Thank you.

  =====================================
  This can be caused by incompatibility source files and or
  a problem with video filters. It may be interesting to try to open
  Movie Maker and go to... Tools / Options / Compatibility tab
  and uncheck all filters.

  Also, you could try Publishing (save) your Movie Maker
  project in format .wmv to a folder on your hard drive
  and then import the full movie DVD Maker.

  Large complex projects can also cause problems... it can
  be worth a try to create several small projects and save
  each of them in the format .wmv movie to a folder on your hard drive
  drive. When you import clips .wmv collection in DVD
  Each machine will become a scene (chapter) you can have
  up to 18 scenes.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Menu Widget provided with Muse shows some but not all my submenu items.

  Menu Widget provided with Muse shows some but not all my submenu items.

  Here is the site on catalyst: http://cgfnewsite.businesscatalyst.com/index.html

  The problem is in the submenu of the media/articles.  It only shows two and there are many others.  If you go to the page you can see all the links. I have the page hierarchy properly set up in the title of the page articles with titles.  I've even shortened to see if it works.

  Under the videos link all sub links appear.

  Any help would be appreciated.  I code a little, but I'm not very good.  So please be technically.

  Thank you!

  Go to outline view, click with the right button on a page "invisible" and

  (1) make sure, that under 'menu options' the point 'include the page with hypertext links' is enabled.

  (2) choose the option 'Page Properties' and check 'Page Properties/Options', the "Export Page" element is turned on.

• I can not pair my Apple Watch with my iphone 6 s so true the automatic procedure freezes the app on my iphone. If manually matching the 6 digit code will appear on the Apple Watch. I have the current ios 10.0.1

  I can not pair my Apple Watch with my iphone 6 s so true the automatic procedure freezes the app on my iphone. If manually matching the 6 digit code will appear on the Apple Watch. I have the current ios 10.0.1

  does anyone have a solution to this?

  Hello

  The following steps can help (try again after each):

  • On your iPhone, in the application of the watch, go to: Watch My > general > use > software update - remove any file update, if one is displayed.
  • Delete all profiles beta (on your iPhone and/or the watch), then restart both devices (this applies only if you have already participated in a program of Apple Beta software).
  • Restart your iPhone and your watch:
    • Close open applications on your iPhone:
      • Double-click the Home button, and then drag upward on each Preview app to close.
    • Close the two devices together, and then restart your iPhone first.
      • Restart your iPhone, iPad or iPod touch - Apple Support
      • Restart your Apple Watch - Apple Support