Twice on the same computer using Windows 7 upgrade
My computer with Windows 7 Ultimate upgrade crashed, and I need to reformat my system to my original Vista OS. I'll be able to use my Windows 7 upgrade disk a second time on the same computer? Will I need a new product key?
Yes and no, you won't need a new product as the first installation key has been destroyed. At most, you will be asked to use the phone activation line.
Tags: Windows
Similar Questions
-
Failed to load XP on the same computer using the product key on the case of the CPU.
I uninstalled XP and tried to load Window 7 s. had driver problems. Let down. Now I can't reinstall XP on the same computer using the product key on the case. I get a message "invalid Key". It's a Dell PC 6 years, if that matters.
As I said, you will need the manufacturer's recovery disk, or disk OEM System Builder.
Do you have which drive tried to use?
You may be able to borrow a disk OEMSB from a friend - or you may be able to order the Dell recovery disks (they are cheap).
-
Download photoshop for free twice on the same computer with a different account?
Download photoshop for free twice on the same computer with a different account?
No, you can use the trial only once on a single computer.
Concerning
Hervé Khare
-
Windows do not accept my product key twice on the same computer.
I installed the new Windows 7 ultimate student version bought from my University, with the partition (which I don't), then immediately, I reinstalled without partition. Now, it's not accept the same product key on the same computer? How to fix this? Please give suggestion...
Hello Barret,
Thank you for your response.
I appreciate your time.
Please see suggestions from Andre Da Costa said on July 8, 2011 and check.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/activation-failure-0xc004f012-after-running-OK-1/08007343-49B3-4253-9023-b34d10323479Hello Barret,
Thank you for your response.
I appreciate your time.
Please see suggestions from Andre Da Costa said on July 8, 2011 and check.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/activation-failure-0xc004f012-after-running-OK-1/08007343-49B3-4253-9023-b34d10323479Alternatively, you can check the link for the Centers of Activation Microsoft Volume Licensing phone numbersbelow:
https://www.Microsoft.com/en-us/licensing/existing-customer/activation-centers.aspx
See also the links below
Get help with windows activation 10 errors:
http://Windows.Microsoft.com/en-us/Windows-10/activation-errors-Windows-10
Activating Windows 10
http://Windows.Microsoft.com/en-us/Windows-10/activation-in-Windows-10
Please keep us updated.
Thank you
Please keep us updated.
Thank you
-
Need a quick answer here! I'm selling my older HP laptop that has Windows 7 above. I intend to uninstall the operating system, and then reinstall it to wipe all my data. The copy is just a simple upgrade from Home Premium (the laptop came with Vista). When I reinstall, can I still register by using the same key? I have heard that it is installed on a computer at any time then you can, but I'm not completely sure.
Enable is the right term, Yes. Now what happens if I simply select "Custom" when I try to install the upgrade of Windows 7 since I don't have a Vista disk?
If your Windows 7 is an upgrade license any system move to must have a previous operating system eligible before you can use it elsewhere. You may also need to reactivate by phone:
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Hello:
I'm doing a work around. I have a Palm M505 with a fantastic keyboard that connects to it. This allows me to write documents in a very portable way. The Treo 680 has never been the equivalent external keyboard, really full compatible with it rendering. So, I want to create documents on the M505 but otherwise use especially the Treo 680.
That's the problem. When I tried to synchronize two devices for my Palm Desktop version 4.1.2 for Windows XP, it did not work. HotSync to synchronize applications that do not work on the M505. In addition, versions of Documents to Go are very different (5.x versus 8.x).
I have a separate installation of Palm Desktop for each device, so I can have a nice desktop environment for each launching them separately. But the Palm Desktop installation "Wizard" stops and does not give me the opportunity to do a separate install of funds.
Any ideas other than the purchase of an ultra compact laptop and drop this scheme kludgy? For example, if I had to copy the installed files in files from one directory to another, this work or would would he not put in place in the registry?
Thank you!
Very well. Stubbornness is paying off! I could beam documents between my Palm M505 and Treo 680, avoiding the need of complicated synchronization of the two Palms for my laptop. I was also able to transmit documents of both palms to my laptop Dell Inspiron M300, running Windows XP Pro.
When transferring between Palm devices, the results were better. In the M505, Documents to Go version 5,004 does not translate documents in Microsoft Word format, but in something he calls Word to Go. The Treo has DTG version 8.003, which is able to read files in Word format Go and save Microsoft Word for Windows format natively.
However, even when transferring a word in the document (old format) Go directly on my Windows XP computer desktop, he gave me a document that I could open, with the text that I would be entered following a bunch of Word characters obviously did not understand. If I add the file from my office to the most recent Documents to Go version on my laptop, I would expect that it it mean in a Word file when it sync for the Treo, but who were not on trial. In both cases, beaming between devices Palm is the simplest solution and has completely solved the problem.
For readers who are interested, that I so stubbornly tried to solve this problem because I am a typist quick touch. My old Palm M505 plugs directly into a Portable Palm both wonderful, old keyboard which is full size. Because it is a wired connection, I can type fast. This old keyboard compresses in the same footprint folded as some new keyboards external foldover. Even though much more bigger by folding it together in an accordion - like fashion, with record four flat surfaces. The design of this keyboard is now in some keyboards sold by the IGo Corporation (their former name for it was Sierra Stowaway Bluetooth keyboard). But they were unable to find a way to handshake their Bluetooth with the strange configuration Bluetooth in the Treo 680. Why from the library different Bluetooth in the Treo 680 Palm other Treo is a mystery to me, but enough of this tangent. Some interested by this workaround can be curious for the same reasons.
Message is about: Treo 680 (Cingular)
-
Running Windows 98 on the same computer under Windows Vista Home Edition
I have a CD collection that will not play on Windows Vista, then how can I instal Windows 98? 300 GB of memory in 32-bit operating system, AMD (tm) 64 x 2 Dual Core Processor 4200 + 2.19 GHz memory.
Assistance is welcome.Go first, site of the manufacturer of your computer, check to see if your model computer has 98 drivers available for it...
If 98 drivers are not available for your model, forget the idea.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Read this info:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
If this is not Vista compatible, read the info on the link above.
It works for some programs, but not all.This applies to software programs, NOT hardware drivers.
See you soon. Mick Murphy - Microsoft partner
-
clean install of ultimate detail in a separate partition, already installed
Due to persistent problems with cleaning of virus alureon back remains including taskscheduler, backup and restore, System Restore, I propose to installed ultimate RAID 0 volume 0 (currently occupied by the details of the home premium) and copy files for ultimate in raid 1 1 volume (probably take 3-4 weeks). Please see my profile and posts for info on how I managed to get into this mess. As the systems are stable at the time can someone think of something to prevent this or better idea, if ok will install, mse, av and spy, ad, malware progs 1 before so I can scan all files on the file transfer. At present I have swop systems via the bios hard drive boot priority and order, takes seconds.hope this senseImage copy defective everything first as a precaution. Use Windows Easy Transfer to capture your files and settings. Den of the bad copy or reinstall Ultimate. Transfer your files and settings back with WET. You can scan the file .mig (the WET file) with the reinstalled the new copy of ultimate AV program before starting the transfer.
You cannot transfer your programs. They must be reinstalled. I don't see how using a second partition/installation ultimate solves anything. It would be a waste of disk space and a lot more work.
-
I installed and run all programs HP Assistant and everything seems fine. When I print from the 'Office' using Internet Explorer 9, it works. When I try to print from "Metro (homepage) interface" on the same page in Internet Explorer 10 nothing prints. I got a Microsoft technician look and he can't understand it.
Thank you for your time. It seems unfortunate that the only "bypass" is not to use the new system. I hope that this is addressed in the near future.
-
How to transfer emails from a user account on the same computer on Windows mail in Windows Vista
my name is misspelled when accounts set up for the user after the clean install of Vista Home Premium. I want to create a new account with my name correctly spelled and remove the old once I have everything transferred to the new account. Create the account and transfer my document folders, I think that presents no problems (all my documents are in an external drive), but I'm not sure of the correct way to windows mail transfer. I saw an article inhttp://windows.microsoft.com/en-us/windows-vista/Fix-a-corrupted-user-profile, but it says nothing about the only thing I need and that is to know how to transfer mail from windows. I just reinstalled vista a week ago and I'm still working from my external hard drive, the only thing I really have to transfer from the old account because my Windows Mail. Any help would be appreciated
http://www.Vistax64.com/tutorials/90298-Windows-mail-messages.html
See if the above tutorial will help you.
See you soon.
Mick Murphy - Microsoft partner
-
In place of the "Office home and student" on the same computer using a license?
I bought Microsoft "Office Home and Student 2010. It can be put on 3 computers (a 3 licenses). After about a month of having it on one of my computers, the hard drive crashed and Windows does not requireing of reinstalling Windows. I need to put 'Office Home and Student 2010' on it, but it will employ up to the 3rd license if re - install it uses another. I planned really put it on the computer of my son as he heads to College.
How can I put on a computer, he was already on without using my final license?
Thank you in advace for your help.
Pilfred
Hello
You can see the article below for more information about activation of Microsoft Products.
How to contact a Microsoft Product Activation Center
http://support.Microsoft.com/kb/950929I hope this helps.
-
Hello. I have a computer that was running Windows 7 Professional. The software has been installed on the computer and authentic and purchased several years ago. Due to problems, I had to reformat the HARD drive and reload Windows 7 Professional on the same computer using the same product key.
Now it will not activate and comes up with an error 0xC004C020 code which States that "the activation server reported that the Multiple Activation key has exceeded its limit"
I do not understand why this has happened. I bought the copy of Windows 7 Professional on ebay and I have the box, case and the two original disks of Windows 7 Professional, as well as the authentic product key sticker. He was recharged on the same computer that was originally activated copy (same product key)
I have attached the report of diagnosis MGA below. Would like to find a solution for this. Thanking you in advance.
Concerning
aredmond3
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-*-*-*-WW948
Windows product key hash: + F8x/Z13t6PUnC6SwLq0K0nNUv8 =
Windows product ID: 55041-050-0514542-86485
Windows product ID type: 6
Windows license type: Volume MAK
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {88F218E7-37F3-4D56-A00A-CC6BA6619981} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.130828 - 1532
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\iexplore.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]Other data-->
Office details:{88F218E7-37F3-4D56-A00A-CC6BA6619981} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 64 *-*-*-*-BATH 55041-050-0514542-86485 6 S-1-5-21-2782086357-3459354306-4055444517 Dell Inc.. Vostro 400 Dell Inc.. 1.0.13 20080321000000.000000 + 00027E03407018400FA 0c 09 0409 AUS Eastern Standard Time(GMT+10:00) 0 3 DELL FX09 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, channel VOLUME_MAK
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-050-051454-03-3081-7600.0000-1652016
Installation ID: 018164699111361393048692667234003612777274626804435541
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: WW948
License status: Notification
Reason for the notification: 0xC004F009 (grace period expired).
Remaining Windows rearm count: 4
Time to trust: 2016/06/17 14:05:49Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Not registered - 0 x 80040154
The admin service: not registered - 0 x 80040154
Output beyond bitmask:--> HWID data
Current HWID of Hash: MgAAAAEABAABAAEAAAACAAAAAQABAAEA6GFYoNK/ZP6I/cAdEuLSCdA1GuyMlKAuzDE =Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC DELL-FX09
FACP DELL-FX09
HPET DELL-FX09
MCFG DELL-FX09
FX09 DELL SLIC
DMY2 DELL FX09
SSDT PmRef CpuPmUnfortunately a mass activation key is used by the company to activate several PC and not meant or sold for use by consumers. Understanding the MAK Activation
When you mention you bought on eBay that explains it pretty well because there are hundreds of early cases of consumers ripped off on eBay by Volume and TechNet keys sold illegally.
If you don't have any other Windows 7, 8 or 8.1 license to use for the upgrade, what I would do is go ahead a buy Windows 10 and make the Clean 10 Windows Installer that has no complaints and if you stick with the steps in the link results in the best installation of the best OS who's going to stay that way as long as you do.
-
Is it possible to send and receive RTP streams on the same computer?
Hi all
I tried sending an RTP stream and receive it on the same computer, but it did not work. I use the AVTransmit2 and AVReceive2 classes, I assumed that these classes are popular, so I have not included the code for them) for this.
It works perfectly fine when a computer sends using AVTransmit2 and another receiver using AVReceive2. However, when, on the same computer, I get the following error in AVReceive2:
The address I used for transmission and reception is: 224.144.251.104/22200Cannot create the RTP Session: Unrecognized Windows Sockets error: 0: Cannot bind
And I also discovered that it IS possible to send and receive streams on the same computer using JMStudio, but I found it very hard to dissect its code.
How can this be achieved using these two classes, that is, the AVTransmit2 and the AVReceive2?
Any suggestions will be greatly appreciated.private String createTransmitter() { ... localAddr = new SessionAddress( InetAddress.getLocalHost(), port); destAddr = new SessionAddress( ipAddr, port);
You can do this instead:
localAddr = new SessionAddress( InetAddress.getLocalHost(), SessionAddress.ANY_PORT);
-
I had Windows vista on my laptop after 1 year I had to re install windows, but now its always tells me that the product key is already in use (I use the product key for the same computer laptop I installed previously on).
Please tell me why this is happening as I am once again the installation on the same laptop.
Thank you
I see what is the problem.
You have a corrupted Licnsing store-
Please try the steps below to re-create the store with the correct data.(1) open an Internet browser window.
(2) type: %windir%\system32 in the browser's address bar.
(3) find the CMD.exe file
(4) make a right click on CMD.exe and select "Run as Administrator"
(5) type: net stop slsvc (it may ask you if you're sure, select Yes)
(6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing
(7) type: Rename tokens.bar tokens.dat
(8) type: cd %windir%\system32
(9) type: net start slsvc
(10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)
(11) restart your computer twice.You may need to enter your COA key and activate it.Once complete, run another report MGADiag and post back with the results -
How to put windows 7 pro on the new computer using the same key on the side of the other computer
I have a computer comes with windows 7 pro. I am now building a new computer. How to put windows 7 pro on the new computer using the same key on the side of the computer. I don't have a Windows 7 disc.
Original title: Windows 7 pro
Tuesday, October 14, 2014 20:31:20 + 0000, 4hammond wrote:
I have a computer comes with windows 7 pro. I am now building a new computer. How to put windows 7 pro on the new computer using the same key on the side of the computer. I don't have a Windows 7 disc.
You can not, for at least one (and two possible) reasons.
1. it isn't clean if you want to have two computers, or you
you want to remove from the old computer and put it on the new. If
you want once, you can't do that - the rule is very clear: there
a copy (or a license) for each computer.There is nothing new here. This is exactly the same rule that has been in
effect on all versions of Windows from at least with Windows 3.1.2. but even if you want it on a single and from uninstall
the old computer, you can't do it. It is because if it came with the
computer, it is an OEM version and the biggest drawback to he a
OEM version, is that its license it permanently binds to the first
It is installed on the computer. He can never legally be moved to another
computer, sold or assigned (except with the original computer).
Maybe you are looking for
-
Carillon of boot loop - start 2011 MBP will not start.
I have a start 2011 15 "MBPro8, 2 Quad Core Intel Core i7 2.30 GHz Boot ROM version: MBP81.88Z.0047.B2A.1506082204 Intel HD Graphics 3000 VRAM:512 MB AMD Radeon HD 6750M VRAM:1 GB 8 GB of RAM 1333 MHz DIMM0 It will not start. Trying to start the mac
-
Update of digital control with different values with array function
Hello I have attached my code base. I want to execute the code for 2 sets of digital control with a gap between the two values, then pass it. Something like that ABC Initialize the P1 = 10; P2 = 20; P3 = 30; P4 = 40 Run the code delay = 10ms Update o
-
After office 2010 download and install, PC with xp crashed
I downloaded MS office pro plus 2010. He installed himself, and then he said that I needed a reboot to complete the installation. I answered Yes. After the restart, got the famous blue screen. I turned off the computer, wait about 20 seconds and then
-
Slow Wrt1900AC WiFi browsing speed
Hi all The router has a current run time of 3 days, since I bought it and has the latest firmware installed, my wifi is configured as follows: 2.4 Ghz - WPA 2 - B G N channel only - 1-20 mhz onlyWidth auto - channel 36 - only 5 GHz - WPA 2 - A N Do n
-
Unable to join the Windows 7 computer to the domain
We are not able to join a few Windows 7 workstations to the domain. Performed troubleshooting steps- (a) check the connectivity with domain & it is good, also able to join other systems to the same network domain (b) followed the troubleshooting step