Twist cannot pull up bar charms with touchscreen

Similar Questions

• HP Touchsmart problem with touchscreen driver ect...

  Hello

  I have a big problem please help me.

  HP TouchSmart 520-1018fr desktop

  Model: H0N17EA

  I no longer Recovery Manager pour restore drivers and software under Windows 8.1 home 64 bit because I want to put the ' with touchscreen.

  HP TouchSmart 520-1018 en

  Manufacturer: Hewlett-Packard
  Maximum resolution: 1920 x 1080
  Screen size: 23.1 "(51 cm x 29 cm)
  Manufacturing date: 31/12/2001
  Aspect ratio: 16:9
  Type of video input: Signal digital DisplayPort

  I had Windows 7 home 64 bit on this PC before then I do a reset completely uninstall w 7 on this pc I wanted to have the computer naked complement that he nor more nothing on the hard drive.

  Pour Installer w 8.1 home 64-bit is now I have nothing

  not covered or the touch screen or HP update since I installed w.8.1 home 64 bit.

  I go into the device from the pc it does not find the driver to download.

  I have search the Internet to find the driver pour have new ' screen touch but cannot find the driver pour reinstall l ' touchscreen under aw 8.1.

  Thank you in advance pay help me.

  CDL

  PS: Besides the Pc reboots of it is under tension (EDF) unless I press the Start button of the computer...

  Hello
  I found the solution, that it is in the BIOS
  This good so good
  Thank you

• can send but cannot receive messages on ipad with IOS new 9.3.2 waves I

  can send but cannot receive messages on ipad with IOS new 9.3.2 waves I

  1. make sure that the information entered in the transmission & reception area in settings - Messages is correct

  2. If so - settings - Messages - switch off

  Log settings - iCloud

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

  If you can't send or receive messages on your iPhone, iPad or iPod touch

• I cannot install extensions, they appear with "will be installed after you restart Firefox" even after that I restarted.

  Hello

  I cannot install extensions, they appear with "will be installed after you restart Firefox" even after that I restarted.

  The 'Intermediary' folder is present and rest after a restart, but the extensions do not get installed. They show in the extensions page with the message "will be installed after you restart Firefox" and remain like that, no matter how many times I restart.

  Any idea?

  Under Firefox 24.0 Windows 8.1

  Thank you very much
  BD

  P.S. Just tried to install the add-on "convenience store" before asking the question and I got an error saying that it cannot install because it cannot change the necessary file. (I did manually instead)

  I tried to delete the files extensions.* nothing works. However, I deleted the addons.sqlite file and restarted my computer (computer not only Firefox) and that seemed to do the trick. Problem solved.

  Thank you for your help, it is appreciated.

• Since the last system upgraded my menu bar top with wifi and time, date etc etc is hidden unless I have sulk my cursor on it. Same thing with apps from shingles. How can I restore it is always there?

  Since the last system upgraded my menu bar top with wifi and time, date etc etc is hidden unless I have sulk my cursor on it. Same thing with apps from shingles. How can I restore it is always there? bar menus hidden-how do I restore?

  SystemPreferences-> Dock: automatically hide / show Dock

  SystemPreferences-> general: automatically hide / show menu bar

• I have made a subdirectory for libflashplayer, therefore, but it cannot move to this location with cp or mv

  Question
  I have made a subdirectory for libflashplayer, therefore, but it cannot move to this location with cp or mv

  Hello

  See also this. It would be also useful to display @ debianHELP and Debian User Forums

  Issues of Debian

• the Awesome bar opens with all: home. Is this normal

  The Awesome bar opens with the words
  topic: home.
  This concerned me because it reminds me of the hijacker
  Subject: white that infects a computer sooner that I owned.
  Withdrawn ok but concerned me at the time

  This is the default home page in Firefox 4.0.

• Have a new 6 but cannot get it to sync with iTunes on my Mac. The two systems have system updates (and both confirm). How can I update iTunes on my phone when he said the latest version?

  Have a new 6s, but cannot get it to sync with iTunes on my Mac. Both systems have system updates (and confirm the latest version). How can I update iTunes on my phone when he said the latest version?

  The message to update iTunes refers to iTunes on your Mac - is your Mac on a high enough version of Mac OS X to support the required iTunes version? If this isn't the case, then your Mac can be changed?

• Cannot successfully comQosants my computer with Windows updates. I have tried disabling Norton anti-virus and firewall.

  Cannot successfully comQosants my computer with Windows updates. I have tried disabling Norton anti-virus and firewall.

  Jim Eckland

  Jim,
  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot send to multiple addresses with outlook express

  Cannot send to multiple addresses with outlook express

  Hello
  even if you weren't too fourth to come up with more details on this issue, guide for the question on Outlook express here.
  If you have more specific questions, please include more details.
  http://support.Microsoft.com/kb/835830
  B Eddie

• Shared variables with touchscreen of TPC-2106

  I can't work with a TPC-2106 Touch Panel shared Variables.  I am hosting a Board 9642 sbRIO variables.  I built a test VI to run from the hard drive, and I can edit and read variables that VI.  When a generation a VI to run it on the touch screen works, but he can't read or write on all shared variables.  No error is shown during the execution of the VI.

  It seems that I is not need to take special steps to install support for this version of touch panel by: http://zone.ni.com/reference/en-XX/help/372507A-01/lvtpcgsm/tpc_install_sharvar/

  I tried the "Shared Variable.lvproj" sample project that is supposed to generate weather information and then transfer it to the touch screen.  The weather data are generated and displayed by VI on my PC.  The VI on the touch screen works, but never any weather data updated.

  I use LabVIEW 8.6 with touchscreen, FPGA and real-time modules installed.

  I have the touch screen connected via an Ethernet cable directly to my PC.  I assigned an IP address to the touch screen manually.

  Problem is solved using an Ethernet crossover cable instead of a standard cable.

• Cannot transfer pictures to gogear with media player 11 is it possible to install media player 10

  Cannot transfer pictures to gogear with media player 11 is it possible to install media player 10

  Niall CharlesHorgan Hi,

  1. what happens when you try to transfer pictures to your player? You get the error message?

  2. What is the model number of the player you are using?

  You will not be able to go back to Windows Media Player 10 in Windows Vista. Windows Vista comes pre-installed with Windows Media Player 11.

  The status is unknown the Philips GoGear compatibility in the Windows Vista Compatibility Center.

  Take a look at the following links and see if it helps:

  Set up a device to sync in Windows Media Player

  Windows Media Player sync: frequently asked questions

  The problems of synchronization

  In addition, you can contact Philips Support.

• Cannot format drive DVD - Rw with Windows Vista.

  Cannot format drive DVD - Rw with Windows Vista. Download "Windows cannot format... or is unable to complete the format.  Something like that. See a solution with Windows 7, but I use Windows Vista. Help?

  Hello

  ·        What is the model number of your computer?

  ·        Who is the manufacturer of your computer?

  ·        Did you format the disc earlier?

  ·        Are you trying to format the drive using windows Explorer or through third party software?

  I suggest you read the web link, below he provided information related to the formatting of disk.

  http://support.Microsoft.com/kb/930405

  Hope the helps of information. Please post back and we do know.

• cannot log on as administrator with the password and open a user button session sends to the temporary profile.

  cannot log on as administrator with the password and log on user button wife sends him to temp. access to some of my articles on his desk.  She lost all access to his information.

  Original title: cannot log on as administrator with the password and log on user button wife sends him to temp. access to some of my articles on his desk. She lost all access to his information.

  Hello

  • Remember to make changes to your computer before this problem started?

  However, you can access the link below and follow the steps mentioned in the article and check if it helps you to fix the problem, and connect you to your normal user account.

  http://support.Microsoft.com/kb/947242

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.