two icons for single computer

Similar Questions

• Cannot open the icon for MY COMPUTER

  I use Windows XP Home Edition and cannot open the icons for MY COMPUTER AND MY DOCUMENTS AND SOME SHORTCUTS

  Hello

  1 are. what icons you referring?
  2. what exactly happens when you try to open the icons or documents or shortcuts? If you get an error message and then, after return the exact error message.
  3 How long have you been faced with this problem?
  4. don't you make changes on the computer before this problem?

  Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
  How to ask a question
  http://support.Microsoft.com/kb/555375

• For the last month or more, I had the same two updates for my computer

  original title: Windows updates

  For the last month or more, I had the same two updates on my computer.  Is anyone know why and what I can do to fix this?  I am running Windows XP.  Thank you very much.

  Hello

  the message "you have hidden the important updates" is normal, because you have hidden the high priority updates, but the updates are already installed, if that's OK.

  Try to look again at the web page:

  http://www.update.Microsoft.com/

  and click on "Custom".

  You should not see the updates (KB2518864 and KB2539631) in "review and install updates.

  You should see only "Important - you have hidden the important updates..." and "high-priority - updates non-priority updates to update for your computer... ».

  Then, try this (remove the content of the "'C:\Windows\SoftwareDistribution" ")

  1. Click Start, click run, type services.mscand click OK.
  2. In the Services (Local) pane, click automatic updates, and then click stop.
  3. Reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

     Note By default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. This place is a placeholder for the drive where Windows is installed.

  5. Ensure that Windows distribution folder is emptyand enlarge the Services (local) window.
  6. In the Services (Local) pane, click automatic updates, and then click Start.
  7. Restart the computer.

  I hope that we will achieve the goal, it will no longer still report the updates :-)

  LC

• Why are there two icons for my P1102w in devices and printers, Windows 7 Pro?

  I've recently updated the firmware and drivers on a LaserJet P1102w and now have two icons in devices and printers on Windows 7 Pro. An icon is correct and functional; the other is basically an icon that does not work and it reads series of printers HP LaserJet P1100. Functional icon reads the printer HP LaserJet 1102w (which is correct). If a single UN-installs the unusable icon, Windows just charge drivers to re - start. Is it possible to get rid of this icon?

  The problem has been resolved.

  HP Smart Install apparently was the problem. It is that I have updated the firmware and drivers to the latest (version October 2012) that the problem started. I used the HP CD and run the utility to disable Smart Install. I managed to remove the second icon, and he never returned.

  When I bought the printer, Smart Install worked fine, but not after the firmware upgrade.

• Two icons for the same program when pinned to the taskbar

  I get two icons in my taskbar for Yahoo.  One is pinned and there all the time, but another opens when I run Yahoo.

  I have this marking of the icon and then began to Yahoo and PIN the icon that appears when does Yahoo.  But at the time when I do, I get two new icons!

  It doesn't on my laptop... but I don't see anything different in my settings!  It makes me crazy!

  You have probably some duplicates in this folder:

  c:\Users\Heather\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch\User Pinned\TaskBar

• BlackBerry Smartphones why the two icons of the emails?

  I don't understand why there are two icons for e-mails or messages.

  I would like to remove one of my e-mail account and keep the Messages one right.

  That is problem?

  Hi and welcome to the forums!

  Are you referring to the icon associated with your email address?

  It would look like an envelope with a globe with your email address under.

  I hide those and put in a folder, it reduces clutter on the home screen.

  All messages are in the queue, and I manage them all what he.

  Make sure that you remove, just hide. If you remove it, you remove the account!

  Thank you

  Bifocals

• two buttons with single function

  I want to create two buttons for single function and a single button for a function. For example, I click on button1, the display shows "clicked1".

  If I clicked on button2, the display shows "clicked2". If I click on button1, and then click button2, it will show that "the two buttons are clicked. However, it does not work in two buttons with single function. What is the problem? Here's the code.

  import flash.display.MovieClip;

  import flash.events.MouseEvent;

  var button1:MovieClip = new Button1();

  Button1.x = 200;

  Button1.y = 200;

  addChild (button1);

  var button2:MovieClip = new Button2();

  Button2.x = 300;

  Button2.y = 250;

  addChild (button2);

  Button1.addEventListener (MouseEvent.CLICK, onClick);

  Button2.addEventListener (MouseEvent.CLICK, onClick2);

  var isClicked:Boolean;

  var isClicked1:Boolean;

  function onClick(evt:MouseEvent):void {}

  isClicked = true;

  trace ("clicked1");

  }

  function onClick2(evt:MouseEvent):void {}

  isClicked1 = true;

  trace ("clicked2");

  }

  If (isClicked & & isClicked1) {}

  trace ("two buttons are clicked");

  }

  Copy the following code

  If (isClicked & isClicked1) {}

  trace ("two buttons are clicked");

  }

  should run WHEN you click on your buttons.  That is to say, place it in a function and call that function when you click on your buttons and after that your Boolean values are updated.  (probably then want to reset these Boolean values in the called function).

• I signed up for CC. I don't know that this Dreamweaver will come into conflict with my older version of CS5. You can run two versions of the DW on a single computer?

  I signed up for CC. I don't know that this Dreamweaver will come into conflict with my older version of CS5. You can run two versions of the DW on a single computer?

  You can run two versions of the DW on a single computer?

  Yes.  Please do not duplicate messages.

  Nancy O.

• How to install two operating systems on a single computer

  Original title: windows

  How to install two operating systems on a single computer, xp and windows 7... ?

  Hello

  Thank you for contacting Microsoft Community.
  For the installation of two Windows OS (called Dual Boot), you first determine what exactly the BONES. Based on this, you can proceed to install the oldest operating system first, then installing the latest OS. Here, in your case, Windows XP first and then Windows 7.
  If you change the order, the latest version of Windows will not work correctly.
  In addition, you can use Virtual PC or VMware to use Windows XP in Windows 7. Windows XP Mode is another version of Microsoft which allows you to use Windows XP in Windows 7 through Virtual PC. You can download Windows XP Mode from here:
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx
  To install Windows XP Mode, you must have Windows 7 Professional or higher, with hardware virtualization enabled in your PC (you should check in the BIOS of your PC). If you prefer Windows XP Mode, you don't have to install Windows XP in the above mentioned way. It installs like any other program on Windows 7.
  Note that if you have Windows 7 Edition Home Premium or lower edition, you can try Windows XP using Virtual PC/VMware or dual-boot.

• I have two monitors, I need remote desktop for my computer at home and be able to see two screens on my home computer, how do I do this?

  I have a laptop with a single monitor.

  I need remote desktop for my computer at home and be able to see two screens on my computer at home.

  How do I do that?

  Original title: dual monitor question

  If you look at 'Options' remote desktop and look at the "View" tab there is a checkbox for "use all of my monitors for the remote session.  You may need to be an administrator to set this option.

  Check out these similar posts too.

  http://www.Google.com.au/search?q=remote+desktop+dual+monitor&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & redir_esc = & ei = WgtJUKLeH6mRiQe834DoAw

• Two consecutive sound icons for Audio files

  HI -.
  
  I've implemented a flow line which has two icons of consecutive sounds before displaying an icon of interaction with a question.
  
  The first sound icon is for the audio issue.
  The second sound icon is for audio for all of the answer choices.
  
  Originally, I had the file set up to play full audio of the issue and to play the audio response BEFORE the interaction icon would then become active (which requires participants to fully hear the question AND choices before responding). I did it using «WAIT FOR PREVIOUS SOUND "in the timing tab for the sound icons.»
  
  Now my client wants the interaction in question is immediately active while the game of questions and answers.
  
  Is it possible to have TWO separate room sound icons in order "simultaneously"? Or do I need to combine the TWO audio files into a single icon and sound competing to define? I was hoping to avoid combining the two audio files into an icon of her unique for two reasons:
  1. the files in question and response are delivered separated... so you have to put them together.
  2. I was hoping to put the answer files that are reused several times in a library file so that they can be reused again and again to maintain the low file size... and if I have to combine the question with responses each time, it will increase the size of the file.
  
  Or can I somehow use a command in a CALC ico to play an audio file located elsewhere?
  
  Any help would be appreciated.
  Thank you!
  
  
  

  The combination would be better for what is facilitated. A free audio tool like
  Audacity would be perfect. I understand the issue of management of library/property only.

  Authorware has only one audio channel the audio icon, you noted.
  The classic/native way to get around this is to have another audio
  Play through a sprite or an ActiveX control. The old method was to use
  the film with the film icon ' audio only ' QT, but the icon of film without
  more long handles QT...

  So much easier can be to create a Flash movie with the other audio file.
  Save down, as close to Flash 6 you can and use the Flash Sprite to
  play the other audio file.

  Otherwise, I think that Gary has a Xtra or .u32 on its site;
  http://www.mods.com.au
  who can manage playback of audio files - buddyWav, is it?
  HTH
  Erik

  Scott - TNC wrote:

  > Is it possible to have TWO separate room sound icons in order "simultaneously"?
  > Or do I need to combine the TWO audio files into a single icon and sound value
  > who to simultaneous?

  --
  Erik Lord
  http://www.capemedia.NET
  Adobe Community Expert - e-Learning
  http://www.Adobe.com/communities/experts/
  ------------------------------------------------------------------------
  http://www.awaretips.net - Authorware tips!

• How can I get a shortcut icon for Microsoft Community on my computer desktop?

  I want to put an icon for this forum on my computer desktop and the usual method to do a right click on a page and clicking on create shortcut does not work.

  You can reduce the size window and drag the site icon (favicon) to the left of the address bar of your desktop and it will automatically make a shortcut. Alternatively, you can drag your Favorites on the desktop icon.

• I need to download windows xp service pack 2 on a computer professional home for a single computer.

  I need to download windows xp service pack 2 on a computer professional home for a single computer.

  I am the administrator please help thanks vicki.

  Links to a downloadable version of all Service Pack for Windows XP updates can be found here:

  "How to obtain the latest Service Pack for XP"
    <>http://support.Microsoft.com/kb/322389 >

  Ignore any verbiage that says "for the professionals' because that's exactly what you're looking for.  They put that when service packs have been made public to cut down on bandwidth for everyone both this download.

  HTH,
  JW

• When computer boots up I get TWO lines for "Microsoft Windows XP Home Edition.

  I reinstalled Windows XP and somehow it reinstalled on my D: recovery partition! Craps! In any case, now, when I turn on the computer, it is written "Please select the operating system to start:" and then has two lines for Microsoft XP Home. The 1st line log on the D: partition. So I am forced to choose the 2nd line to work on my c: to ole. How can I remove the 1st line? 2nd, is my tour recovery partition? and what does one do?

  Please help!

  Thank you!

  How to change the boot.ini file: http://support.microsoft.com/kb/289022

  Currently, your .ini file may contain:

  [boot loader]
  timeout = 30
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Windows XP "/ fastdetect
  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Windows XP "/ fastdetect

  Your .ini file must contain the following:

  [boot loader]
  timeout = 30
  default = multi (0) disk (0) rdisk (0)partition (1)\WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Windows XP "/ fastdetect

  Note: The value of 30 seconds timeout can be set to 0 and you will start automatically on windows (do this after checking the cahnges you make are what you want).

  J W Stuart: http://www.pagestart.com

• My Windows 7 Enterprize evaluation copy has expired and I need to get a new license for this computer and two others

  My company Windows 7 evaluation copy has expired and I need to get a new license for this computer and two others?

  Evaluation copies are for your temporary assessment, so you can decide if you like the system.  If you want to continue using it, you buy it.