Two logos app installation to the Simulator

Similar Questions

• App installs in the Simulator, but will not work

  I installed a (bar) AIR app in the Simulator (currently using the default icon), but when you click on it, it does nothing.

  I tried various sovereign wealth funds including extremely simple without success.

  I tried in the card Sim PlayBook. and the card Sim BB10. The only difference in the latter case, it is only after you click the icon, the screen clears before returning to the original state after doing nothing with my application.

  I tried without success AIR 2.5 - 3.2.

  In the command line, I see: blackberry-airpackager version 1.6

  I use Vmware 4.0.4 (after many hours of Assembly and disassembly of the different versions of Vmware)

  It has many old Posts with suggestions on how to package and install AIR applications built in Flash Pro. for use with the PlayBook.

  What is the most recent and correct for PB so BB10 method?

  Thanks to steve_web:

  The problem was that I try to run the SDK/bin folder command line package manager and using full path of the directory for files SWF and xml of th.

  As a result, there is a similar directory structure in the folder of the air in the BAR.

  I did that because I couldn't have the classpath working to run Packager outside the bin folder.

  I got it finally work when I realized it was WAY not the CLASSPATH that needed to be added.

  In short... the app worked, but it didn't load the swf file because he was in a series of subfolders in the BAR.

  Thanks Steve!

• App works on the Simulator, but not on the device

  Just try to run the helloworlddemo app compiles fine and works on the Simulator without problem. All I get on the device is an icon of the application that does nothing when clicked.

  I had read this might have to do with the version of the JDE is high for the operating system on the device, but I'm running JDE 6.0.0.37 and the operating system on the device is 6.0.0.666

  I tried with my own app first, compiled, signed it and get the same result as helloworld, then its certainly some mounted sort of question but I have no idea of what

  Thank you

  Sheldon

  Thought of it - was to set the permission of application so that all 3 items were "allow."

• My App works on the Simulator, but not on a handheld

  Using the JDE 4.5 with 4.1.2 MDS Simulator

  Eclipse with JDE

  ---

  My app works fine on the simulator using MDS.

  The application simply pushes a screen and then creates a thread (an object of type LoadScreenThread) that will take an XML file using HTTP.  The XML file is parsed and then creates a new screen and it grows by calling (from LoadScreenThread): invokeLater with an executable object what method run() calls anti-pop and the specified UiApplication pushScreen.

  I tried various things for the last 10 hours and it still does not work.

  For the HTTP connection, because I would use MDS to Internet I added the '; '. deviceside = false' suffix.

  Could someone tell me please know why it would work fine on the Simulator (MDS) and not on a portable device?

  On the handheld, I see the arrows download flicker.  But it drives not only the new screen?

  Your device is connected to a MDS (BlackBerry Enterprise Server)?

  If it's just your BB private, so it's rather unlikely, and you will very probably connected to BIS. But you have to grant special permissions to RIM using BIS to use other means like the WAP2 gateway.

  Take a look at this thread:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=29103

  It explains basically everything on the sides of the network connectivity to BlackBerry.

• App disappears from the Simulator end to increment the version property

  I use Eclipse 3.4.2 with JDE 4.5.0 and 8330-JDE Simulator.

  My application works well in the Simulator.

  I close the Simulator and make only one change, which is to go to the project properties and increase my 11.0.4 to 11.0.5 version number.

  I restart the Simulator and my app is no longer on the page program.

  I tried this 3 times with exactly the same result. BTW, change the number of return does not help. I had my initial project to restore backup each time.

  I'm apparently lost another setting, but I am certainly not change anything else intentionally.

  Any ideas?

  TIA

  Mike

  I solved the problem by running clear.bat, then reload the Simulator. I still don't know why it happened, but at least I can now move. Thanks for the effort...

• Rental app run on the Simulator, but not in real device!

  Hello

  I made a simple application using GPSDemo in JDE, I get altitude, longitude, latitude... I tried in the Simulator (9000) and it worked perfectly.

  But when I put it on my BB (bold 9000), I can't get the location information. I've done some tests and I think it's because the location.isValid () return false!

  I checked the settings of the BB and the GPS is activated.

  Do you know what is the problem? And what can be the solution ?

  Thanks for your help and I apologize if my sentences are strange, I'm French and not very versed in English ^^...

  Ok! I found the solution! The problem wasn't my code, it came from the camera. I had update (outdoor) GPS data in the advanced options because it was the first time I tried to use it.

  And now it works perfectly!

  Thank you for all your help

• Taking apps addition to the Simulator

  How do you take the old test on the Simulator applications.  They do not appear in the list of device applications to remove.

  Run simulator file clean.bat.

• Confusion: two 32-bit installation on the download page programs

  Hello:

  I need to know how to proceed * IF * I inadvertently installed 32-bit v50 ' XP/Vista' version on my Win7 and Win10 systems. Reference: http://forums.mozillazine.org/viewtopic.php?f=38&t=3025405

  Back story:

  Today ' today - on my third, backup, Win7 Office - I noticed two different options of 32 bits here: https://www.mozilla.org/en-US/firefox/all/ the column headings are very blurred (see screenshot). But I finally found the two 32-bit installers is the correct version for 7/8/8.1/10 to install on * this * rig.

  ~ 2 days ago, however, when I updated my other two systems (Win7 and Win10), I do not notice that new, third option, or maybe, it wasn't there. Can I have inadvertently installed version ' XP/Vista' on a Win7 box and an area of Win10.

  I'll come back on those computers later and will try to check.

  Until I do, here are my questions:

  (1) how can I know if installed the correct 32-bit version of Fx 50 on my other 2 boxes yesterday - the version for Win7 and more?

  (2) if installed the one bad (the XP/Vista version), I have to:-my backup profile and install the correct version on top of the existing v50 build? -my backup profile, Fx to uninstall and reinstall the correct version? -do nothing, if it is not working properly? -do something else?

  Thank you!

  daledoc1

  Same version of Firefox is delivered by two hyperlinks if you use Win7 or greater (or Vista with compatibility SHA2 Microsoft Update).

  The link of the left hand for XP/Vista bypasses the XP/Vista limited to SHA1 support.

  If you are using XP/Vista and select the link to the right, you would get Firefox 43.0.1 instead of the current version, and then you need to update Firefox manually. or wait until the automatic updater has done the update for you the latest version.

• Integration of BBM: unable to complete the installation (in the Simulator)

  Hi, I have a problem, I wanted to integrate BBM to my Apps, but I actually just Simulator test.

  When I run and I add my blackberry ID I always get to this page:

  

  Isn't this possible? I have the newest emulator (10_0_09-2318) and the vmware player 4.0.4 build-744019

  but now, I found the solution:

  https://developer.BlackBerry.com/Cascades/documentation/device_platform/BBM/bbmsp_testing_bbm_app_de...

• Creating cloud app installs on the new computer

  Just got a new iMac and used Migration Assistant to transfer on everything. PS and LR and everything else but no cloud creative app. I get this message:

  Adobe Creative Cloud is necessary to solve this problem. However, it is missing or damaged. Please download and install a new copy of the creative cloud of 'http://www.adobe.com/go/adobecreativecloudapp'

  I have downloaded the file .dmg 3 times now, ran Setup, but once finished it repeats the above message.

  Follow the suggestions mentioned here.

  "Failed to install" error Creative Cloud Desktop application

  ~ David

• Cannot debug/run app in the Simulator from IDE update

  I did the error has earlier to upgrade my momentics IDE to 2.1, and since I'm unable to successfully launch my app to the market or debugging in a simulator. The application loaded on the Simulator and I can run from the home screen by pressing on it, but while the splash screen is displayed, the application stops immediately when launched from the IDE. There is no error message displayed in the console, the application stops just immediately after the splash screen is displayed.

  I tried with five simulators which worked very well all the way from 1.0.x to 10.3.x. I am lucky to have an old copy of the 10.1.0 IDE still on my system and I can run and debug my app very well using this one, but I would really be able to use the IDE to 2.1 again. It worked fine on the 2.0 IDE too, these problems just started to happen after the 2.1 IDE update.

  Has anyone else seen this, and if so, have you found a solution?

  OK, never mind. I accidentally upgraded my old working version of the IDE too all by improving the SDK (I forgot that it updates too the IDE) and panicked because then it would be not too run or debug from the IDE. I solved it but by uninstalling the TWO versions of the IDE, then put it back up from scratch. After the clean install, everything is fine and I can run and debug fine with 2.1 IDE.

  I guess it's something messed up with the upgrade process. A fixed.

• App installs on Z10 when the icon & Splash Screen images are added to the handle Bar

  HI - don't know if it's an unusual question, but my app not install/load on my Z10 when one or both of the pictures icon and Splash Screen are added in the descriptor of Bar.  I development mode and have an installed debugging token and it is still valid.  The strange thing is that the application will be installed on the Simulator without problem.

  If I remove the splash screen images & icon in the Bar descriptor file, the application load on my Z10 with success.

  The images are the right size: 114 x 114 px for the icon and 768 x 1280 px for the SplashScreen.  The Momentics IDE accepts two files by activating beside them.  I also tried to add the images to the Q10 & PlayBook and still no luck with this loading on my device.  I even tried to go back to the image by default for the icon, and who does more either.

  The error I get when trying to install my application on my Z10 with icon images & Splash Screen is:

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 414105
  Info: Installing com.example.ProfitCalc.testDev__ProfitCalc9866a36a...
  Info: Treatment 414105 bytes

  Someone has any ideas why this happens?

  Thank you.

  It is a known problem with certain versions of BlackBerry OS 10.1.  This article explains the problem and provide a workaround.

  Deployment of applications may crash or not after OTA 10.1 update.

• Can deploy app in the Simulator, but not to the device

  Sorry about this newbie question, but how is it that a simple HelloWorld application compiled in Eclipse runs just fine on the Simulator, but cannot be installed on a 8320 Curve by the Blackberry Desktop Software?

  I use the latest version at all.  The message returned by the desktop software is:

  ! There was an error importing files.
  No additional applications can be found. Your file can
  contain applications that already exist in the list of applications,
  are not compatible for your device, or errors.

  However, I am able to deploy the application on the handset using the command line tool:

  C:\Eclipse\plugins\net.rim.ejde\vmTools\JavaLoader.exe -usb load \workspace\HelloTest\deliverables\Standard\5.0.0\HelloTest.jad
  

  This installs the application, which then runs correctly on the device.  I can then reload the list of app on the Blackberry Desktop Software tool and it shows HelloTest, but under the properties of the Application-> dependencies it says:

  "Application not available (net_rim_cldc).

  It seems that some dependence crept in the generation of the application and that confuses the desktop tool.  The curve is running 4.5 OS.

  Should I just throw this office tool, or how can I clean the application so that it installs correctly?  Obviously, this is just foreplay before building a much broader application, and I wish I had these little glitches will hamper ASASP.

  Thanks for any help!

  You should be able to download a plugin 4.5 on the site to update. Go to "help > install new software" to open the screen of software available. If you have not yet done so, add the updated BlackBerry site to your Eclipse configuration:

  1. Click on "available software Sites.
  2. Click on the button 'Add '.
  3. Enter a name such as 'BlackBerry update location' and set the location http://www.blackberry.com/go/eclipseUpdate/3.5/java
  4. Click OK, then OK again to return to the screen of the software available

  The 'working with' menu drop-down, select the location of BlackBerry Update (or whatever you named it). Expand the BlackBerry Java plug-in category and you should be able to select an appropriate plug-in version.

• App won't start with the Simulator

  Hello

  I met a lot of mistakes trying to get that deployed on the Simulator, most of them addressed by other posters.  I use the 0.9.3 beta version of the Simulator.

  However, now I have this problem that I can not find the answer.

  Flash Builder will not launch the application.  The following text is displayed in the console:

  Using the default icon: C:\Program Files (x 86) \Adobe\Adobe Flash Builder 4\sdks\blackberry-tablet-sdk-0.9.2\bin\... \samples\icons\blackberry-Tablet-default-Icon.png
  Package created: C:\Development\Mobile\PuzzletsPlaybook/PromoAppPlaybook.bar
  Picked up JAVA_TOOL_OPTIONS:-Xmx1024M
  Sending request installation and launch...
  Error: Username or password is invalid or not specified or time on the device is out of sync

  I tried this FB parameter to use the Playbook password and not to use it, and fail both ways.

  How can I fix it?  The Playbook must have a pw but I can't start my application.

  Also, I use VM Player as host of Simulator, the Playbook should be run in the Simulator or is it launched by FB?  I tried two ways does not.

  Thank you!

  Hey,.

  It seems that you are using the latest sim but more old SDK. try to update your Tablet OS SDK of AIR and then try to deploy again. using the versions do not match led to mistakes in the past.

  Here is the link to the latest SDK:

  http://us.BlackBerry.com/developers/Tablet/Adobe.jsp

  Good luck!

• Is it possible to test an app DPS in the IOS Simulator

  Does anyone know if it is possible to test an app DPS in the IOS Simulator? We try to remain accessible to users of the iPad 1 for as long as possible) to test 5, 6 and 7, IOS in the retina and resolutions non-retine, which means I'm going to need 5 ipads. I only have two

  See you soon,.

  Keith

  Sorry for the delay in responding.

  The IOS Simulator seems to observe the DPI information for screens, even to change scale setting for virtual IOS devices compatible retina when you move the Simulator to a display of high resolution to normal display. As I have both, I'd get a reasonable facsimile.

  There is unfortunately no way to IPAs run in the Simulator - as I discovered it now is not imitate the environment ARM and applications have developed for the Simulator to use for testing.

  I have to go shopping...