Two minutes after I turned on the laptop Vista freezes

Similar Questions

• Just after I turn on the laptop (before that turns on Vista) I get "cannot open volume for direct access.

  Just after I turn on the laptop (before Windows Vista turns on) the following message appears "cannot open volume for direct access.  What this mean and how can it be solved?

  Thank you

  Eddie

  Hi EddieLopezA,

  ·         Which version of Windows Vista is installed on your computer?

  ·         You have antivirus software on your computer?

  This problem may occur if another utility or service, for example a virus check program or a program disk monitoring, locked the partition before you try to run the Chkdsk.exe or Autochk.exe utility.

  I have some steps that may help you.

  Method 1: I suggest you to turn off all third-party applications and check if you have a similar question.

  To do this, follow these steps:

  1. open the start search box, type services.msc and click OK.

  2. in the Services (Local) list scroll the service concerned (for example auditor of virus or disk monitoring tool).

  3. right click on the service and select Properties.

  4. change the startup type to disabled for all applications 3rd - party that could be the cause of the blocking of Chkdsk problem.

  5. click OK/apply.

  6. restart the computer.

  Method 2: If this does not help, try to change the registry value and restart the computer.

  1. click on the start search box, type regedit.

  2. in the Publisher of the registry under the HKEY_LOCAL_MACHINE subtree, go to the following subkey:

  \SYSTEM\CurrentControlSet\Control\Session manager

  3 change the Boot entry run of:

  autocheck autochk * /r\DosDevice\C: (or other)

  TO:

  autocheck autochk *.

  Note: Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.  If you want to edit the registry to fix this I urge you to back up your registry before proceeding.

  Links for:

  Unable to run CHKDSK

  http://support.Microsoft.com/kb/555484 (also applies to Vista)

  Hope the helps of information.

• Computer laptop freezing one minute after I turn it on.

  Original title: the laptop freeze

  my computer freezing guard about a minute after I turn it on, ive tried a bunch of different controls and analyses and even removed several things that were recently installed on my computer, I don't see anything else to do to try to fix it, it works fine in safe mode but freezes even with a clean boot in normal mode

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/products/malwarebytes_free
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  Are registry cleaners or optimizers system on the computer?

• While turning on the laptop its gives me a message "your pc will restart in two days for the installation of updates.

  About a week ago I just bought windows mobile 8 is installed. Now for the last two days while turning on the laptop its gives me a message "your pc will restart in two days for the installation of updates.

  To stop, I get three option 1) sleep 2) arrested update 3) and close

  What should I do?

  Original title: windows update issue 8.

  Hi Parichay,

  The updates that are being invited to install are automatic updates.

  The message you get is offered by Windows 8 after that updates are downloaded and installed.

  If you do not restart your computer soon, Windows will force a restart of your computer two days after that it has installed new updates to complete their installation.

  You must restart your computer at a convenient time for you, rather than wait two days and have it suddenly reboot maybe at an inopportune time.

  Hope that solves your problem.

• How can I turn off the laptop after restoring it to factory settings?

  Hello everyone

  I'm selling my Portege R830-10 q If I want to restore it to the settings to factory (out-of-box state) AND THEN TURN IT OFF.

  I brought the laptop to factory settings successfully using the _TOSHIBA recovery Wizard_ and choosing * factory default software recovery (Recover State out-of-box) *. However, at the end of the process of recovery and after everything is back in place I was not able to TURN off the POWER to the laptop. It only gave me the option to restart. After rephrasing it, the Windows installation process starts.

  I don't want to install Windows, i.e. language, keyboard, user account, etc. I want to leave the Windows installation for the person buying the laptop to me. How can I turn off the laptop after the recovery of the system without having to install Windows?

  I would appreciate your help.

  Concerning

  Pedro

  When the recovery process is complete and you are prompted for a reboot just press start button / stop and turn it off. I think it's only thing you can do.

  Anyway, why not start Windows and go through the configuration option. New owner can modify this basic anyway parameters. As username Admin and language and the keyboard can be set as default.

  For example, if you have a picture of German recovery set to German. New owner can change in any case.

• I get the message "iPhone is disabled try again in 24,145,404 minutes after having turned it on."

  I get the message "iPhone is disabled try again in 24,145,404 minutes after having turned it on."

  Anyone know what this means?

  Which sometimes occurs after successfully entering the access code to many times. See this support article for help. -AJ

• Difficulty in the light on the AC adapter and the power light power on after connect you to the laptop

  HP Pavilion dv3t notebook. Each time get adapter connect to the laptop, it takes at least 10 minutes to get the AC adapter and power indicator light on. Sometimes it does not light on all day.  It always happens any with the battery or not.

  If I start the laptop with the light on the AC adapter and the power light, no matter how I move the power cord, it maintains support, works very well.

  But if I start the laptop without the light on the AC adapter and the power led on even with the, i.e. start with the battery as power, no matter how I move the power cord, the led on the AC adapter and the light, i.e. no charge. He stops until the battery drain.

  I believe that the AC adapter is good. But I have no idea why he has trouble in the light on the AC adapter and the power light on after to connect to the laptop.

  Dv6 had a somewhat similar problem that was treated with a BIOS upgrade. I watched the latest BIOS for your laptop and there is nothing about a problem of load, however. If it works very well and also a long time that you turn it on with the AC plugged in but only has a problem with loading when you connect the adapter Windows runs, I'm tempted to say that it is a software problem as a problem with Windows power management. Maybe if you remove the hard drive, power supply, switch it on with battery only, then plug the adapter when you run in a pre-Windows environment, we can see if the same problem occurs. If it was my cell phone, I would also like to do the update BIOS level, just to see if maybe it would affect something. I could also try to run it from a Linux Live disc any and see if the same problem occurs in another operating system. Last resort I would begin focusing on the issues of possible material, as a module of taking bad AC, which is an other replaceable part that requires no welding.

• Remote works for about 5 minutes after I turned on my Qosmio F60

  Hi there all the

  My Qosmio F60 remote works for about 5 minutes after I turned on my pc...
  How can I make it works normally?

  all Ty<>

  Hey,.

  And after these 5 minutes, you get an error message or what happens?

  Either the remote or not so did you start some applications after 5 minutes they could affect this function?

• Internet connection drops when I turn on the laptop

  I use a computer laptop dv7-7250us HP Envy, running windows 8.1.  All my software is up-to-date.  In the last month, everytime I turn on the laptop, the internet connection drops.  Troubleshooting of HP operation resets the wifi adapter.  It's boring run the troubleshooter in the mornings.  Any suggestions on what I can to prevent that from happening.

  I have Intel Centrino Wireless - N installed 2230.  I went out to the Intel Web site and most recent driver.

  Hello

  I rolled back the driver in Device Manager, and now I'm able to connect automatically when I turn on the laptop.  The driver that works has been dated to August 2013.  The Windows update in June for this caused driver wifi whenever I turned on the laptop.

• ProBook 4530 s: grinding noise near the vents when I turn on the laptop.

  Sometimes when I turn on the laptop, a loud grinding noise is heard from the left corner, near the vents.  I think that's probably the fan.  I turn off the laptop because it doesn't seem like grinding stops.  Then when I turn it on again, grinding noise disappeared.  The fan needs to be replaced, or when the fan needs to be replaced?  Is this easy to do?

  Alternatively, the problem could be something else?

  MContrary wrote:

  I see that there is a video on YouTube for laundry s my exact machine, HP ProBook 4530 fan.

  I guess I'll try to do that, but the noise I hear is very strong, as something very bad is grinding

  This could be the lack of fan or some a little debri is inside the unit that should not be there.

• When my computer is updated before stopping, my friend, turning off the laptop. Now, my laptop does not work. He said dose explore window does not. I can not open any program.

  When my computer is updated before stopping, my friend, turning off the laptop. Now, my laptop does not work. He said dose explore window does not. I can not open any program. What should I do? Please help me. Thank you

  Hi TaiNguyen95,

  ·         Have updates you installed?

  ·         What is the full error message?

  Follow the steps provided by Keith from the link.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

• I apologize in advance if this isn't the right forum, but I need to do a reformat on this computer.  My question is, after you turn off the CC, PS, LR and bridge I have to uninstall as well?

  I apologize in advance if this isn't the right forum, but I need to do a reformat on this computer.  My question is, after you turn off the CC, PS, LR and bridge I have to uninstall as well?

  If you want to reformat the hard disk, in erasing all data on the computer, there is no need to uninstall.  Deactivation is sufficient.

• My Studio laptop freezes after 10-15 minutes after I turn it on. What could be the problem?

  I turn on my laptop and everything works, but it freezes.
  What can I do if it does not freeze?

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Turn off the display on 20 minutes after no response on the monitor

  I have this weird problem my computer power setting defined as about 20 minutes after the display display off turn off when you try to move the mouse and the keyboard he still see the no screen (still running fine PC no screen but no response). Meanwhile, I restart my com and still no screen (PC still works very well at the moment) but I can hear on the background when windows starts. The most amazing thing is "I HAVE FOR THE COOLING SYSTEM AND offshore power ABOUT 20 minutes, THEN IT WILL RETURN BACK MY SCREEN MONITOR".

  Hardware specification

  Model of motherboard Asus P5G41-MLX

  Intel dual core 2

  Kingdom of RAM DD2 - 4 G

  ASUS EN9500GT 1 G graphics card

  I need expertise to solve the problem of e. thanks!

  Looks like the graphics card is overheating.  Check all fans of the system work, particularly that of the graphic card.

• Processor/fan continues to run even after turning off the laptop

  I'm using Inspiron 15 3542

  I've updated my OS to Windows 10, but sometimes will not stop the fan from the processor/even after discontinuation of the laptop (as well as the display goes off)! The fan continues and continues. And after this laptop won't turn on even! I have to open the battery, and then it lights up!

  I downloaded almost all the software required for my laptop dell for Windows 10 x 64 software download through bit.

  PS: I searched the forum google/checked, and the solution I found was to download Intel Management Engine. I did download and install it, but the problem seems to stay...

  Kindly help and thanks in advance!

  Sorry for the double post!

  Found a solution: https://www.dell.com/support/home/in/en/indhs1/Drivers/DriversDetails?driverId=NFY3D&fileId=3497768106&osCode=WT64A&productCode=inspiron-15-3542-laptop&languageCode=EN&categoryId=FW

  I have installed, be informed after several tests