Satellite L670: black screen during playback flash or avi on the internet

Similar Questions

• Firefox displays black screen during playback of YouTube

  I noticed recently that Firefox stopped reading YouTube videos and showing only black there where it is supposed to be a video of the screen. So after a lot of research, a lot of people argued that this is problem of flash player. I tried to install the earlier version, but that has not changed anything. So I uninstalled Firefox and downloaded more old, but stable version (34.0.5). And voila! YouTube videos shows again. After a week, I noticed that YouTube watch again box black screen. Unwittingly, I opened the Revo Uninstall and saw that there are TWO Firefoxes installed - one is that I have personally installed and another is newest Firefox 37.0.2. So I uninstalled the latest Firefox, but unfortunately it also uninstalled my old version of Firefox. This time still installed Firefox older (34.0.5) and I made that he never check for updates and it not install them. YouTube has started to play well. After a few days, new Youtube not not video poster, only his time and you can see real video images by pointing cursor on the video time line. So I checked the applications installed and found mysteriously installed latest Firefox with the former. So can anyone help me to stop the latest auto-install Firefox and leave only the old man? Any solution would be much appreciated.

  YouTube has failed over to the HTML5, users of Firefox's Flash player default player. Usually, you can distinguish by right clicking on the drive and looking at the last item in the context menu that appears. Can or if you see this page, you confirm that you have been switched?

  https://www.YouTube.com/HTML5

  As a temporary workaround, there are a couple of extension to force the Flash on YouTube for users who find that the HTML5 player doesn't work for them (or downloaders will only work with Flash). For example:

  • https://addons.Mozilla.org/firefox/addon/YouTube-Flash-video-player/

  But with Windows 7, you should be able to use the HTML5 YouTube Player, and it would be so ideal for trying to debug this problem if you are interested to experiment a little.

• Satellite L300D: black screen during boot - stuck on classpnp.sys & repair

  Hi I have 3 year old Toshiba L300D.
  1 year back I upgraded vista to windows 7 Home premium.

  3 days back I had problem - my windows start page was hanged and was not forward, also all types of safe mode was stuck on classpnp.sys.

  After reading many forums, I started with USB (with windows 7) and use command prompt and all 'pcmcia' realted deleted files from drive C. Now using function F8

  I can't use any option (all the safe mode option, low resolution, restarting, etc. doesn't work, even in the Bios configuration changes will not work). Also now start my PC with USB, after the start of the windows black screen page appears with the white arrow and it will not go further this black screen so I can't even use now guest & installation option.

  Now, I don't know what to do :(
  Any help will be appreciated :)

  Hello

  The classpnp.sys seems to belong to «service Plug & Play of Windows 7»
  Connect USB devices to the laptop?
  Try to start the unit without the connected USB devices.

  In the worst case, you have to reinstall the OS using the recovery disk if F8 and all other Repair Options would not work.
  But in my view inevitable painful s

• black screen during playback of Dungeon Keeper 2.

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  I installed Dungeon Keeper 2 and loads of all good. but when I go to play the game it is just a black screen.

  Hello kirstielongman,

  Check out the suggestions in the thread in a forum below:

  http://Forum.Suprbay.org/showthread.php?TID=55064

  Update your video driver
  Download patch for Dungeon Keeper 2

  Check if you still have the same problem.

  Thank you

• Black screen during playback of AVC .mp4 in Windows Media Player files.

  Original title: no video with .mp4-STROKE.

  When I load the .mp4-STROKE with OMP files, I get a blank screen. Audio playback. The same files used to play fine on this same computer, same install OS. I have not installed any new codecs or video applications. I can read these files without problem in Irfanview or Avidemux. Any idea what might be going on here?

  Hi, thanks for responding. I opened the settings display settings / advanced, but there is no option for hardware acceleration.

  In all cases, the problem disappeared. Now I can view my STROKE with WMP files again. Just another mystery I guess...

• Black screen during playback when using scale effect movement

  I worked on a project where using the motion effect scale with keyframes on a clip has worked fine until today.

  Now, every time I read the sequence and reach the clip with the animation of the scale, its completely black.

  I tried to make all by pressing Enter, and the chronology becomes green on top. It is always black. If I disable the motion effect in the effect controls tab, the video source appears fine.

  I tried to disable hardware acceleration of mercury, cleared the cache the preview, but it doesn't seem to help.

  Now, any type of motion effect is rendered.

  With the help of PP CC 2014.2

  By clicking the reset button next to the title of Motion fx effect in the menu effect options brought things to a sensitive State. Don't know what I did wrong to get into this lock.

• Download black screen during installation of Windows 7 from the disk.

  Original title: loading Windows 7 with windows 8 is already installed

  Dell computer brand new.  (Terrible dealer. They charge $ for help on something other than the material.)  The new computer comes with windows 8 is installed.

  Like any windows 8.  Ordinate of windows 7.  They sent the disc and no key.

  Dell will not help with installation unless you pay them $!  They say that it's a Microsoft product, and they are not obliged to help, even if it was purchased from them!  It's like buying a new washing machine or a car.  You need to contact the manufacture to get help with it?

  No, you communicate with the store, it was purchased from.  This applies to any new product I know. But not with Dell!

  Sorry for the rant.  I just found this totally outrageous situation.

  MY PROBLEM:

  Installing windows 7 from the drive, they sent.  Ten minutes into it the screen goes all black.  It is said that there is a file on the disk.  Also a button to continue.

  I stopped the installation and am at a loss as what to do...

  Thank you, Al

  Hello

  Have you checked to see if your model computer has Windows 7 drivers available from Dell for it?

  If not, it will not install properly or work properly.

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  ___________________________________

  Have you changed the order of startup and boot the Windows 7 disc, they sent you?

  You press F12 in a Dell to change the Boot order

  http://en.community.Dell.com/support-forums/desktop/f/3514/t/19500812.aspx

  Then do a clean install:

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  ____________________________________

  Or ask Dell to replace the disc if it is faulty.

  ____________________________________

  Or download the correct ISO file and make your own drive and use the product key that is on the sticker COST Dell sent you.

  http://www.w7forums.com/threads/official-Windows-7-SP1-ISO-image-downloads.12325/page-2#post-124821

  And Neosmart has instructions on how to burn ISO disk images using imgburn:

  http://NeoSmart.NET/wiki/Burning-ISO-images-with-ImgBurn/

  By using the downloaded ISO file method can require the Activation of phone.

  If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  The above method also requires that you go to your computer manufacturer's website > Support and downloads Section > locate your model number and operating system > then download and install the latest drivers for it.

   

  ________________________________________________

  Using the method of USB in conjunction with the Windows 7 download preceding:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  "How to get and use the Windows 7 USB/DVD Download Tool"

  http://www.SevenForums.com/tutorials/31541-Windows-7-USB-DVD-download-tool.html

  See you soon.

• Re: Satellite L300 - black screen with flashing white cursor

  All of a sudden my laptop won't start more. It turns on, displays screen toshiba for a second and then goes to a black screen with a blinking white line in the upper left corner. I can't type something here! The last time I used it it was 100% very well, I have not downloaded anything so I'm very curious to what it might be.

  Help, please!

  Hi mate,

  Maybe something messed up to the top of your Windows installation and if the computer may start t more or your HARD drive becomes faulty...

  You can access the BIOS? If so, check if your HARD drive is recognized. If so I think that it of necessary to reinstall Windows. Therefore, take the Toshiba recovery disc.

• IdeaPad 500 - a black screen during Normal labor

  IdeaPad 500 - a black screen during Normal labor

  My 500 Ideapad is a month old. After a few days with her, I saw that in the middle of my normal work (Word, Excel, ETC...) My screen turn Black and will never go back. Only with the black screen reboot goes normal again.

  What should I do here?

  Thank you

  In response to the reports of customer displays or screens turning off on Lenovo while in use systems and works on battery, Lenovo released a solution via the Intel Management Engine Firmware update, v.11.0.0.1176.

  The Intel Firmware has been approved for the following models:

  • IdeaPad 300 s-14ISK, 500-14ISK ideapad
  
  
  • Lenovo Edge-2-1580
  
  
  • Lenovo, Flex 3-1480, Flex 3-1580,
  
  
  • 500-14ISK, 500-15ISK Yoga Yoga

  Firmware Intel ME can be downloaded here: http://support.lenovo.com/us/en/downloads/ds105001

  If the solution provided by Lenovo does not resolve the problem for you, other customers report that a workaround solution provided by the MattDN93 client also solves the problem. More information on workaround can be found here: https://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/Flex-3-screen-turns-off-when-working-on...

  Thank you

• Get a black screen during the Installation of Windows 8

  Original title: BLACK SCREEN

  OK, I tried 5 times to install windows 8 by using the downloaded Update widows Pro

  I've updated the BIOS and other drivers and the only issue is to use the upgrade wizard is UEFI is not compatiable that shouldn't be a problem anyway
  So here's the BLACK SCREEN problem, I get all along to install past loan, after adjustment of the apparatus, after preparation, all the way to the end and then it gives just black screen until I power it turns off or reset and says windows 8 could not restore windows I get no error code or any hint of why there not everyone had an idea Yes stay with windows 7 is an excellent option, but I would try and brand and make informed decisions.
  I have internet search and it seems to be a common problem for many different reasons - ideas - Ive tried more things ive read without success. Help please

  Hello Kiwivic,

  Thank you for the question!

  I'm sorry to know that have problems you with the Installation of Windows 8. As I understand it, you get a black screen during the Installation of Windows 8.

  I need to ask you some questions to help you best.

  1. What is the brand and model of the computer?

  2 are the external devices connected to the computer?

  Method 1: disconnect any external devices (except keyboard and mouse) and then install Windows 8 and check.

  Method 2: Select the edge device devices in device/integrated graphic of BIOS (Basic Input output device) and check.

  Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Reference link provided below for more information:

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  Meet us if you encounter any problems with the black screen or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• horizontal single publication now goes to a black screen during a rotation vertically instead of locking int

  There is a new parameter that should be checked to keep in the horizontal view?

  Readers think that the number of the journal is not downloaded or is broken when they hold the iPad vertically and all they see is a black screen but can still type and see the TOC navigation pages.

  The horizontal only is stayed locked in place through our number 4/30. Then with question 5/7 (and every week since then), it was not locking in place. Our updated App was with the number 4/16, so I don't think it was a setting we disheveled on the app. Folio builder has a new parameter, that we must keep Horizontal? Producer Folio?

  Please do not forget that your folio was created with the value of single-direction "intent". We have an outstanding bug where tests 'control upstream' edition are not blocking when the document is incomplete. Right now, you will see empty pages when orientation is not met. We expect a fix for later this week to replace preflight tests, after which you will receive an error for lack of guidance.

• My Apple TV is making black screen that flickers sometimes snow or in the menu that I delivered on pressing on menu & down and disconnect what do I do now?

  My Apple TV is making black screen that flickers sometimes snow or in the menu that I delivered on pressing on menu & down and disconnect what do I do now?

  Read this:

  Get help with audio, video, or power on Apple TV - Apple Support

• Black screen when viewing of DTV, can hear the program, but no image.

  original title; Windows XP Media Center Edition 2005 - black screen when viewing of DTV, can hear the program, but no image.

  When I set up my Windows XP Media Center Edition PC to view DTV, I used the Setup etc., XP scanned and found all the available DTT channels. I thought as much, worked for BBC1, BBC2, worked, then I went to view ITV1 and other channels, could hear the noise perfectly, but there is no picture, just a black background. He used to work because I previously installed the computer. However, wouldn't be a difference that the TV signal will of the antenna, in a block of TNT, and then in the computer, there always used to work. I have that, it is not a signal problem because I could watch the TNT cable SCART on the computer and the image and the sound is fine just using the freeview box. It seems to be the Media Center. Please can someone help me? Thank you

  Apparently, this was caused by an outdated ATI graphics card driver. I recommend upgrading your graphics card driver to resolve this issue. Should work fine then

• I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  anesvet,
  I'm going to sound like I'm repeating myself tonight... (see previous 4 posts...)  but try this:

  When you start start pressing F8 until you get the Windows startup options.  Then try "Last known good configuration" see if that helps.  If this does not work, try to F * then try to go to Safe Mode.  If those who do not help, I would start with your XP CD to recovery mode and run "chkdsk/r" then "sfc/scannow".  QQ learn manage!

• My Windows Vista computer displays a black screen with only a white arrow to the mouse cursor.

  I have a black screen with only a white arrow to the mouse cursor.  I tried to start in safe mode, safe mode with networking, and safe mode in the command prompt. Each time, I just get a black screen with a white arrow cursor.  How can I get my screen back?

  original title: black screen

  Hello

  Remember to make changes to the computer before the show?

  Try the following methods and check the status of the issue.

  Method 1:

  Disconnect an external device connected to the computer with the exception of the keyboard and mouse and check if it helps.

  Method 2:

  If you have the Windows Vista disc, the computer by using the startup disk and perform the Startup Repair. See the following links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Make repairs to the system from the Windows recovery environment.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  Method 3:

  If the method above does not solve the problem, then try to perform a restore of the system from the Windows Recovery Console. You can see the link provided in method 2.