Two questions about T440s and T540

Similar Questions

• Two questions about SP1 and Vista startup

  Hi all
  two questions:

  (1) I understand that if I want SP1 on my machine, I have to install manually, because it is not included in the automatic update routines?

  (2) my machine failed yesterday, I received a message "unable to start Windows. A recent hardware of software change might be the cause. "The only thing I can think is that before turning off the previous time, I inserted a USB hard drive to copy the files on it. But I continued to work normally on the machine. Another unusual event, it is the day before, it was very slow to start, so afer it finished start, I restarted.

  When the system could not start, I tried several times, automatic procedures that always ended with "windows cannot resolve the issue automatically,
  Contact your service provider. In the last attack, I also clicked on a 'Advanced tab' and restored the system, but it does not solve the problem. Then, this morning I turned on the machine again to write the exact error I have, and message instead, unexpectedly (and rather willingly), the machine starts normally. So, what could happen? Should I get my machine (which is less than one month) verified?
  Thank you!

  Paola

  Hi polla.

  (1) Yes, Yes. You must download and install SP1 manually.

  (2) No, I'm Don t think that you should check. I would say: work with it and if the error appears, back up all your data and restore complete your system, so you can exclude any type of software problem...

  Welcome them

• Two questions about ASM and GR 11, 2 installation of the grid

  DB version: 11 GR 2
  Operating system: Sun Solaris
  
  1. in GR 11, 2, after the installation of network infrastructure, succesfull ASM instances starts automatically in all the nodes. Right?
  
  2. just after the end of the grid infrastructure installation, I tried to connect to the DSO. But I was invited for ORACLE_HOME rather than GRID_HOME. Why is this? ORACLE_HOME is the location of the client software of RDBMS. I started not to install some RDBMS again.

  $ ORACLE_SID=+ASM1
  $ export ORACLE_SID
  $ sqlplus / as sysasm
  sqlplus: not found
  $ /u03/grid/bin/sqlplus / as sysasm
  Error 6 initializing SQL*Plus
  SP2-0667: Message file sp1<lang>.msb not found
  SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory 
  
  
  
  $ ORACLE_HOME=/u03/grid/
  $ export ORACLE_HOME
  $ /u03/grid/bin/sqlplus / as sysasm
  
  SQL*Plus: Release 11.2.0.2.0 Production on Thu Nov 11 15:20:16 2010
  
  Copyright (c) 1982, 2010, Oracle.  All rights reserved.
  
  Connected to an idle instance.

  Hi Garry,

  1. Yes, it should start automatically. You have defined all variables before you start the installation?

  2. the variable ORACLE_HOME must be set to the location of GRID_HOME for the user environment of GRID and the location of ORACLE_HOME for the oracle user.

  Kind regards.

• two questions about Style sheets

  With the help of RH7, two questions about styles:
  
  1. I have an older project which seems to act weird. I want to update the styles in our current one important, but seems not to accept it. I can import the file very well, but it doesn't 'take' the formatting (e.g. headers, 'Normal' text, etc.).
  
  It is important without any errors, and in the list of the topic the new style sheet shows like the style associated with this topic, but I can't find a way to apply new formats. I even tried closing and reopening of HR to see if it was some sort of refresh problem.
  
  Any thoughts? Is this a problem of corruption?
  
  2. it seems some of previous authors allowed HR to create of new style sheets for each topic as it has been imported into our system of assistance (from the original Word documents).
  
  Is there an easy way to globally remove these style sheets and their replacement by a new? My instinct is to:
  
  1 import the new style.
  2. Select all subjects in the list of topics, right-click to open the properties, and select apply the new style.
  3. use Project Manager tab to remove all the other styles.
  
  Sounds easy enough, but my concern is to know if HR will apply these changes to the subjects. In addition to my problem in #1 that I met occasionally issues where HR does not seem to apply styles or style changes accurately.
  
  Thank you

  Hi all

  Note that Styles and Style sheets have an order of priority or hierarchy.

  You can have all the styles declared in a referenced external style sheet and everything is fine. But if the document has styles using the same names, those who will prevail.

  For example, maybe your file CSS says that all title 1 text will make in dark blue to 24 point Arial font. The subject could have statement Heading 1 incorporated, which specifies that the text should be Brown in Verdana 12 point. Even if the subject is properly referencing the external CSS file, the text will be rendered Brown because the embedded style rule will override the CSS rule.

  And what will replace it is if someone text selected and applied the style directly. In this case, you're dealing with a style online.

  One way to help determine if you are dealing with a style incorporated is to simply remove any link to the CSS file? The text seems always the same? If so, you probably deal with a built-in style, or online.

  To check a style incorporated, look at your HTML code for the topic. Search in the region of the head for a (including the tags).

  See you soon... Rick

• About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  Hi Michael,

  If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

  One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

  

  Content

  To manage this content, you are currently subscribed and changing your preferences, select the content.

  Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

  You can select to terminate a subscription to a thread.

  

  Learn how to manage your subscriptions

  Take care.

• Question about business and Service of Proxy

  Hi friends,
  I have a question about services and proxy services business IE I need to find the time it takes to call an operation on multipoint business of proxy service, how can I do in oracle service bus (OSB)? You can help quickly

  If your question is only about the performance analysis,
  try to activate the 'monitoring' on the 'operational' of the Service Proxy Service/Company tab.
  For the Proxy Services, if you activate at the level of the 'Action' you get a lot of information about each individual action in a power of attorney.

  See http://www.javamonamour.org/2011/06/osb-profiling-your-proxy-service.html

• two questions about the scattered images secure

  I created an image that is secure and encrypted for sensitive documents.

  I have two questions:

  1. when I use the disk (if it is up, open and available), and I want to add something to it, I usually drag the file everywhere where it is currently in its destination folder in the sparse image control.  But it automatically makes a copy - with the same name (not with a '-1' ever, not with a suffix 'copying' or 'alias').  Which defeats the purpose and makes things complicated - I find myself comparing what is in each location to make sure it's in the sparse image and then it makes me nervous to delete the original.  Why it does this and how can I change such as dragging a file in a secure location gives there is not that a second copy of it left in an UNsecure location?

  2. I'm using Time Machine backup drive sitting on my desk (and a separate utility for monthly clones on a different backup disk).  Automatically makes Time Machine backup the content of the rare picture even if the safe drive is not mounted, open and available?  I hope not, because that would undermine the usefulness of having a backup disk on my desktop running of ordinary Time Machine backups, but find it me just that all the steps I take of course I do not lose any data may be so overprotective I have thought/hoped.

  Sous_forme_d' addendum, I'll check my clone, but as I put this out there, I wonder if SuperDuper!, my application of cloning is cloning automatically secure disk content, so... like the thoughts of anyone about it if it's an application that they use).

  FYI: I'm running 10.11.2

  Thank you.

  (1) by default, OS X makes a copy with the overcoming of the limits of volume and moves when in the same volume.

  You can reverse this behavior by holding down the command key when you drop. You will see the insignia of the icon changes (green + for copy, empty for move).

  (2) Time Machine will return to the top of the image 'file', but only when it is unmounted. I do not think that it automatically includes the volume mounted, but I would like to check and add to the exclusion list.

• Equium L20-198: Question about BIOS and output s-video

  I seem to have two problems with it and that's when I put the bios password on above it on the screen is rubbish, scrammble symbols. Also is it supposd to come with s-video output, but it is a black plastic in place place

  Hello

  I certainly know that the S-video port is not available on all models Equium L20. Please check the specifications of the laptop even though I think that your model should have S-video port. Please contact your local dealer and talk with them about it.

  Your device has a valid warranty and if you think that there is a technical problem, contact the Service partner and explain the problem. Please don t make some BIOS update experiences if you are not familiar with this procedure.

• A few questions about LabView and (fairly complicated) thermocouples

  Hello, I intend to read [this is only 16] 20 thermocouples (type K - in data acquisition, assistant it is J but it will change soon). I use two devices, usb-6008 and usb 6251. I had a BT program (see table below) and I have some questions/statements that need to be confirmed:

  1. I plugged my devices, put DAQ Assistant on the Panel, the temperature chose->-> K thermocouples and I scored channels by dragging a slider 'clicked' on all channels. So now I'm able to read all channels, right?

  2. I have added a few thermometers and digital indicators with them to have an accurate reading of thermometers in digital data.

  3. I've read a few articles on tracing multi channels on a single diagram of wave and I want to apply to my program. Basically, I don't know how to run, I need to make a table and plug it on the graph of the wave. The thing is, I don't know how to do it.

  4. I would get 1 sample per second 1, I added the delay time = 1000ms. Unfortunately, DAQ Assistant says it works like 1 k samples by 1 Hz.

  I am quite fresh in LabView and currently I view tutorials and other things. I would be grateful for advice.

  BTW, I can't test if it works with thermocouples connected because I don't have at the moment and the place where I would be able to test the program has very limited access

  
  

• two questions about apps headless

  Hi gang,.

  I have received the approval of _sys_headless_nostop (yay!) and started to refactor my app to be headless.

  I'm having a little difficulty and could use a couple pointers.  Two questions to begin:

  1.) once I receive permission, I have to do something special?  I updated my token, created a new certificate and generated new tokens of debugging, but when I look at the details for the debug token, I do not have permission to _sys_headless_nostop listed.

  2.) I found a few threads which implies that the only way to debug the part without the app is using instructions qDebug().  Looks like you can not attach a debugger or profiler.  is this true?  How are you supposed to make sure the party stays within the limits of resources imposed on applications without a head if you cannot debug, diagnose and profile headless?

  (3.) the page of stunts on apps without head said to remove the bar - descriptor.xml draft without a head, but some discussion in the forums show examples of how to set up the bar - descriptor.xml for the part without the app.  the headless part requires a bar - descriptor.xml or not?

  (ok, that's three questions!

  Thank you!

  J

  1. your permissions without head non-stop remains on BlackBerry Signing Server. When you export your app, IDE will contact Signing Server to sign your application.

  2. I can't use qDebug to debug, I connect my own debugging string in the HUB

  3. headless part has no need of bar - descriptor.xml, I guess it's useless there.

• Windows 7 starts questions about mac and office 2010 following an installation

  It's a long cut as short as vent. I've been miss sold a record of upgrade of windows 8 full disk-shaped, with norton and office 2010. My goal of creating windows on my mac for a course I'm taking. After that know I need windows 7, I bought it online. I created a partition of 80g on my mac charge windows 7, then norton. Until I loaded the office that I was invited to perform the update from apple in the windows software 7. Note before I installed norton, I load boot camp mac utilities according to the instructions. So, followed by all as should be. The prompt update from apple was quick time, iTunes and airport, I checked all and then updated. Then I loaded office 2010 and obtained throughout the process from the Microsoft site. On the last part of the installation, the installation failed due to a mistake of hanging iTunes. I tried again and again, I fixed the update to iTunes to add and remove the section of windows. Then, I got different errors. I decided to remove the whole score without uninstalling all programs again. When I get to the windows live, that this falls priming. I get various error messages whenever I try to start the process. As a header of Bank pool, fatal error and so on. Can anyone help? What is the damage?

  Hello

  Thanks for posting your query in Microsoft Community.

  Because the question is limited to Windows 7 on your Mac with Boot Camp, I suggest you contact Apple Boot Camp support for assistance.

  http://www.Apple.com/support/Bootcamp/

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Question about snapshots and virtual machines

  Hi all

  I have a small question about snapshots. I use VMware for about 6 months and I read about snapshots and how they work but still have a question to make sure that I understand how it works and it will work the way I think it works.

  I have a Windows 2003 server, which is a virtual machine. I have an application that uses MSDE database. I want to upgrade the database to MS SQL 2005, but to do this I need to back up the MSDE database, uninstall MSDE, and then install SQL 2005 and move the SQL database. This happens on the same VM.

  What I was thinking if I well Snapshots correctly is to snap turned the virtual machine before doing anything. Then do my upgrade steps and see if everything works. If its all messed up so I should be able to return to my shot and everything should be the way he had. What is the good? One of the main reasons I moved the server VM was because of this upgrade.

  After reading the documentation for the snapshots, it's how I undestood it. Pretty much any change could be reversed with snapshots. I wish just they had put in a few examples in the PDF file. Also it would be the same for all type of grades of the OS? Could I snapshot a Windows 2000 Server, and then "in the upgrade of the square" to Windows 2003? I've cloned a VM to do this but was curious about whether snapshots would be just as easy.

  Thanks for your help.

  Hello.

  What I was thinking if I well Snapshots correctly is to snap turned the virtual machine before doing anything. Then do my upgrade steps and see if everything works. If its all messed up so I should be able to return to my shot and everything should be the way he had. What is the good?

  That is right.

  After reading the documentation for the snapshots, it's how I undestood it. Pretty much any change could be reversed with snapshots. I wish just they had put in a few examples in the PDF file. Also it would be the same for all type of grades of the OS? Could I snapshot a Windows 2000 Server, and then "in the upgrade of the square" to Windows 2003? I've cloned a VM to do this but was curious about whether snapshots would be just as easy.

  Exactly the same thing for the upgrades of the OS.

  Perhaps the most important thing with the snapshots is to keep an eye on them and don't let them sit too long or become too big.  You have described the use cases are very good uses for snapshots.  Just make sure you have a solid plan with a schedule set, so that you can come back or validate changes before the snapshot becomes too large.

  Good luck!

• Two questions about the controller of the exporter

  Hi guys,.

  I have two questions on the controller of the exporter.

  1. as the controller of the exporter uses its own user interface, is it possible to generate new files pre-defined in the controller of the exporter to represent its user interface is happy?

  2. how the Ftp settings are stored in the preset currently file? I want to change in my own exporting contronller rather than first UI.

  It will be very appreciated if someone could answer these questions.

  Thank you.

  Hi Alex,

  (1) there is no API to create/modify the presets of the exporter, but as you can see, the .epr file is XML and quite easy to debone in most regions.

  (2) Oh, I forgot this FTP settings checkbox save.  Good fishing!   Yes, the binary data in the .epr are encoded in base64.  The last time I checked (there are several versions), Premiere Pro checksum function is a CRC 32 bit with a polynomial of 0xEDB88320L.  It is not guaranteed to remain the same from one version to the other.

• Question about segments and extensions

  Hi all
  
  node 10.2.0.4 RAC 2 on x86_64 Linux 5.2
  
  I was asked to answer the two questions below. Any body can help me to answer.
  
  1 watch the space allocated by segment and % used, deallocation as necessary to the database - used frag and without
  2. the proposal is that the database creates the extensions that are much larger than the data in the measure.
  Give some background on what is the 'file', and how it is used, for each file to what extent?
  
  Tablespace details are as below [b]
  

  TABLESPACE_NAME                BLOCK_SIZE INITIAL_EXTENT NEXT_EXTENT MIN_EXTENTS MAX_EXTENTS PCT_INCREASE MIN_EXTLEN STATUS    CONTENTS  LOGGING   FOR EXTENT_MAN ALLOCATIO PLU SEGMEN DEF_TAB_
  ------------------------------ ---------- -------------- ----------- ----------- ----------- ------------ ---------- --------- --------- --------- --- ---------- --------- --- ------ --------
  RETENTION   BIG
  ----------- ---
  STAGE_DATA                          16384       52428800    52428800           1  2147483645            0   52428800 ONLINE    PERMANENT LOGGING   NO  LOCAL     UNIFORM   NO  AUTO   DISABLED
  NOT APPLY   NO

  I can query the data dictionary tables to retrieve the required information?
  
  Kind regards
  Sam.

  For question 1, you can also use the view DBA_ADVISOR_FINDINGS http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/schema.htm#BABGGBHI.

  To check the space allocated in the segments, that you must use the DBMS_SPACE package: http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_space.htm. I don't think you can get information at the level of the measure.

• Question about CR and LF

  Hey guys,.

  Quick question on LF and CR. As you can see I'm LF and CR of writing to a text file and because directly.

  

  However, I don't get the CR at the time where I read it. Why is this? Is it because Windows ignores the CR?

  Thank you

  Hi dora,

  read the Help for the WriteText function.

  There is an option for handling of CR/LF characters and explained mentioned in the "Advanced" section of the article for help!