Two questions about ASM and GR 11, 2 installation of the grid

Similar Questions

• Two questions about SP1 and Vista startup

  Hi all
  two questions:

  (1) I understand that if I want SP1 on my machine, I have to install manually, because it is not included in the automatic update routines?

  (2) my machine failed yesterday, I received a message "unable to start Windows. A recent hardware of software change might be the cause. "The only thing I can think is that before turning off the previous time, I inserted a USB hard drive to copy the files on it. But I continued to work normally on the machine. Another unusual event, it is the day before, it was very slow to start, so afer it finished start, I restarted.

  When the system could not start, I tried several times, automatic procedures that always ended with "windows cannot resolve the issue automatically,
  Contact your service provider. In the last attack, I also clicked on a 'Advanced tab' and restored the system, but it does not solve the problem. Then, this morning I turned on the machine again to write the exact error I have, and message instead, unexpectedly (and rather willingly), the machine starts normally. So, what could happen? Should I get my machine (which is less than one month) verified?
  Thank you!

  Paola

  Hi polla.

  (1) Yes, Yes. You must download and install SP1 manually.

  (2) No, I'm Don t think that you should check. I would say: work with it and if the error appears, back up all your data and restore complete your system, so you can exclude any type of software problem...

  Welcome them

• Two questions about T440s and T540

  Hello

  Recently, I bought ThinkPad T540 and my father also got a T440s for his work. He asked me if there was a physical switch to WiFi and I have no idea. It wasn't a W510, is this feature removed on T540 and other models xx40?

  Another thing is the sleep button. Before that I was able to quickly put my computer to sleep with the key Fn + Sleep (rescent blue moon). I know there is no button with the same symbol, but in Lenovo Power Manager there is an option for the action of the "Sleep" button It is set to "sleep". My question - is there a "sleep button" after all? I am able to define a shortcut for sleep somehow outside the power button / stop hoding for 1 second?

  Yes, wifi switch has been removed in laptops Haswell. I think fn + 4 is now the sleep button (not F4!).

• Very simple question about Mac and find out which version of the player

  Hi, really quick here for Mac or Mac users familiar question: How can I find which version of Reader is installed on a Mac? It should be of Mac OSX. I'm just so incompatible Mac (and the guy using it is not fine with it) and I don't know where to look?

  Thanks a bundle

  Mac does not come with Adobe Reader, they come with a program called Preview. The best way to know which version is on a given computer is to ask the owner! If the owner does not know that they can select the file and then on the file menu or by typing the command - I they can activate the command read information that will produce a window with the version information and much more.

• two questions about Style sheets

  With the help of RH7, two questions about styles:
  
  1. I have an older project which seems to act weird. I want to update the styles in our current one important, but seems not to accept it. I can import the file very well, but it doesn't 'take' the formatting (e.g. headers, 'Normal' text, etc.).
  
  It is important without any errors, and in the list of the topic the new style sheet shows like the style associated with this topic, but I can't find a way to apply new formats. I even tried closing and reopening of HR to see if it was some sort of refresh problem.
  
  Any thoughts? Is this a problem of corruption?
  
  2. it seems some of previous authors allowed HR to create of new style sheets for each topic as it has been imported into our system of assistance (from the original Word documents).
  
  Is there an easy way to globally remove these style sheets and their replacement by a new? My instinct is to:
  
  1 import the new style.
  2. Select all subjects in the list of topics, right-click to open the properties, and select apply the new style.
  3. use Project Manager tab to remove all the other styles.
  
  Sounds easy enough, but my concern is to know if HR will apply these changes to the subjects. In addition to my problem in #1 that I met occasionally issues where HR does not seem to apply styles or style changes accurately.
  
  Thank you

  Hi all

  Note that Styles and Style sheets have an order of priority or hierarchy.

  You can have all the styles declared in a referenced external style sheet and everything is fine. But if the document has styles using the same names, those who will prevail.

  For example, maybe your file CSS says that all title 1 text will make in dark blue to 24 point Arial font. The subject could have statement Heading 1 incorporated, which specifies that the text should be Brown in Verdana 12 point. Even if the subject is properly referencing the external CSS file, the text will be rendered Brown because the embedded style rule will override the CSS rule.

  And what will replace it is if someone text selected and applied the style directly. In this case, you're dealing with a style online.

  One way to help determine if you are dealing with a style incorporated is to simply remove any link to the CSS file? The text seems always the same? If so, you probably deal with a built-in style, or online.

  To check a style incorporated, look at your HTML code for the topic. Search in the region of the head for a (including the tags).

  See you soon... Rick

• About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  Hi Michael,

  If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

  One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

  

  Content

  To manage this content, you are currently subscribed and changing your preferences, select the content.

  Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

  You can select to terminate a subscription to a thread.

  

  Learn how to manage your subscriptions

  Take care.

• Equium L20-198: Question about BIOS and output s-video

  I seem to have two problems with it and that's when I put the bios password on above it on the screen is rubbish, scrammble symbols. Also is it supposd to come with s-video output, but it is a black plastic in place place

  Hello

  I certainly know that the S-video port is not available on all models Equium L20. Please check the specifications of the laptop even though I think that your model should have S-video port. Please contact your local dealer and talk with them about it.

  Your device has a valid warranty and if you think that there is a technical problem, contact the Service partner and explain the problem. Please don t make some BIOS update experiences if you are not familiar with this procedure.

• Question about business and Service of Proxy

  Hi friends,
  I have a question about services and proxy services business IE I need to find the time it takes to call an operation on multipoint business of proxy service, how can I do in oracle service bus (OSB)? You can help quickly

  If your question is only about the performance analysis,
  try to activate the 'monitoring' on the 'operational' of the Service Proxy Service/Company tab.
  For the Proxy Services, if you activate at the level of the 'Action' you get a lot of information about each individual action in a power of attorney.

  See http://www.javamonamour.org/2011/06/osb-profiling-your-proxy-service.html

• Two questions on ASM for the Installation of the grid

  Version of grid Infrastructure: 11.2.0.3

  Platform: Oracle Enterprise Linux 5.6

  Question1.

  Oracle: dba will own our grid software (not network user). What should be the permission set for the LUN (/ dev/sda1,..) before the installation of the grid?

  Question2.

  Currently shared LUNS appear in the form

  / dev/sdb.

  / dev/sdc.

  / dev/sdd

  is a single partition must be created before LUNS to ASM?

  For example, I should choose p (primary partition) below. Right?

  # fdisk/dev/sdb

  Device contains a table of the MS-DOS partitions, valid Sun, SGI, or OSF disklabel

  The construction of a new partitioning BACK with disc 0x8b157fd2 identifier.

  Changes will remain in memory only, until you decide to write them.

  After that, of course, the previous content is not recoverable.

  WARNING: invalid indicator 0 x 0000 partition table 4 will be corrected by w (rite)

  WARNING: The DOS compatible mode is discouraged. It is strongly recommended to

  off mode (command 'c') and change the display units to

  sectors (command 'u').

  Command (m for help): c

  Indicator of compatibility BACK is not defined

  Command (m for help): u

  Change of units of display/entry to the sectors

  Command (m for help): n

  Control action

  extended e

  p primary partition (1 - 4).

  Check step 5 here. You use oracleasm utility that changes the permission.

  Infrastructure of network for a stand-alone server installation

  Ta

  JAG

• I forgot my password to my ID Windows Live ID I need to answer the questions about my "ID". I don't know the answers.

  Windows Live ID problem

  Hello world.
  I have a small problem regarding the Windows Live account. My account is: * e-mail address is removed from the privacy *, I forgot my password.

  I need to answer the questions about my "ID". I don't know the answers that I've tried over and over again and I even tried to make security issues and I could not answer.

  What can I do?

  Hello RobertKristof,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Acrobat Reader DC will not install. It goes about 85% and stops with a message that the file I am trying to achieve is on a network and not available.  Totally frustrated that many files need this program to open.

  Acrobat Reader DC will not install. It goes about 85% and stops with a message that the file I am trying to achieve is on a network and not available.  Totally frustrated that many files need this program to open.

  I got this program for years.  Update Windows 10 and after nothing more than headaches with he returned to Windows 7 and it is then Acrobat has stopped working.

  Hi lindat7439924,

  There is no uninstall for Mac Reader program. You can directly delete the application from the Applications folder, which is just trash/Applications/Adobe Reader.app.

  Then you can download Adobe reader from here: http://get.adobe.com/reader/enterprise/

  Kind regards

  Meenakshi

• I just installed for CS5 and my option for installation of the shares does not... How to install?

  I just installed for CS5 and my option for installation of the shares does not... How to install?

  I'm just not my palette actions checked.  Fact.  Thank you.

• Two questions about the ACS 5.1: password aging and allowing multiple disabled accounts

  Hello

  I test in ACS 5.1 password aging, and I discovered that you can have only one global setting for the password for all the accounts internal life. Is it possible to exclude some internal accounts of this global password aging policy? I would like to have number of accounts, passwords should not be aged at all...

  Second question: when I was testing password aging, I set myself to life of password in 4 days with warning after 2 days. All accounts in my test of the ACS configuration are now disabled, because 4 days has passed when I changed it. Is there a possibility to allow multiple accouns at once, or do I have to activate 500 internal accounts manually, one by one?

  Thanks in advance

  WM

  I'm not aware of any way to score internal as users with passwords as enver expire. This is done for admins ensure there is always an admin who can access the system

  In order to change the multiple/all documents for internal users, the following approach can be taken:

  1. Go to the list of internal users and press "Export" then 'Start export' and 'Save file' export user records to a csv file
  2. Edit the file. In the title 'active' column replace 'FALSE' to 'TRUE' for all records. Save the updated file
  3. To the page that lists internal users, tap "File Options", select "Update", and then click next to access the section "Import a file" Wizard. Select the file saved in step 2) and tap on finish

  Afetr imort is completed, all records of internal user should now display "Enabled".

• M30-832: Questions about memory and DVD player

  Hi all, new to laptops up to have a few questions! First of all, I have a Satellite M30-832.
  1. He has on the dvd player on the side of the Compact disk with re-writable below image and sign dvd R/RW under. That means it is a DVD burner as well? It does not sem to recognize blank DVDs and I was under the impression that it should be possible to write about them!

  2. can I upgrade the memory with memory DDR - RAM modules or does take a special type? And how to change them!

  Thank you very much

  Hi Richard,

  From what I can find your M30 832 is equipped with a DVD burner so you should be able to burn DVDs (the specification says you can only burn at X 1 speed for DVDs).

  You should be able to update your RAM to a maximum of 2 GB and I recommend you buy a quality mark to avoid any problems. Your user manual should have details on how to change the RAM modules, but generally it will be to remove a panel of access (usually on the bottom of the unit) and then releasing it two clips (one on each side of the RAM modules) plastic spring-loaded and gently raising the output modules.

  Please make sure that you either wear a wristband anti-statuc dirt or this earth you yourself before accessing RAM modules. They are very sensitive to electrostatic.

  You can find suppliers of RAM suitable if you GOOGLE 'M30 832 RAM.

  HTH)

• two questions about the scattered images secure

  I created an image that is secure and encrypted for sensitive documents.

  I have two questions:

  1. when I use the disk (if it is up, open and available), and I want to add something to it, I usually drag the file everywhere where it is currently in its destination folder in the sparse image control.  But it automatically makes a copy - with the same name (not with a '-1' ever, not with a suffix 'copying' or 'alias').  Which defeats the purpose and makes things complicated - I find myself comparing what is in each location to make sure it's in the sparse image and then it makes me nervous to delete the original.  Why it does this and how can I change such as dragging a file in a secure location gives there is not that a second copy of it left in an UNsecure location?

  2. I'm using Time Machine backup drive sitting on my desk (and a separate utility for monthly clones on a different backup disk).  Automatically makes Time Machine backup the content of the rare picture even if the safe drive is not mounted, open and available?  I hope not, because that would undermine the usefulness of having a backup disk on my desktop running of ordinary Time Machine backups, but find it me just that all the steps I take of course I do not lose any data may be so overprotective I have thought/hoped.

  Sous_forme_d' addendum, I'll check my clone, but as I put this out there, I wonder if SuperDuper!, my application of cloning is cloning automatically secure disk content, so... like the thoughts of anyone about it if it's an application that they use).

  FYI: I'm running 10.11.2

  Thank you.

  (1) by default, OS X makes a copy with the overcoming of the limits of volume and moves when in the same volume.

  You can reverse this behavior by holding down the command key when you drop. You will see the insignia of the icon changes (green + for copy, empty for move).

  (2) Time Machine will return to the top of the image 'file', but only when it is unmounted. I do not think that it automatically includes the volume mounted, but I would like to check and add to the exclusion list.