Two reports call "f01".

Similar Questions

• Run two reports, but generate output

  I have developed two reports, one is a detail (portrait style) and another is a synthesis report (landscape). Now, I need to provide an option that will run reports but display the output in a single document (the document must contain the details and analytical content).
  
  Ideal scenario would be to call the report one after the other, but the output in a capture file, but I don't know if it is possible in the reports.
  
  Any help is appreciated. Thanks in advance.
  
  Sundar

  go to the Navigator object, expand the model layout, you would see the three Sections, header, hand and trailer. Use two of them to your needs.

• I have two report in a page and I want to change the report that one color of header but he perform the two report

  I have two report in a page as A report and B and I want to change the header color report only a header, but it will change the color of the header of the report I use this code in the css section

  table.uReport > thead > tr > th {}

  color: red! important;

  }

  but it will be the effect on the two report kindly can you help me

  Mr.javvi wrote:

  I have two report in a page as A report and B and I want to change the header color report only a header, but it will change the color of the header of the report I use this code in the css section

  {table.uReport > thead > tr > th}

  color: red! important;

  }

  but it will be the effect on the two report kindly can you help me

  Specify a static region ID for each region and which applies to the to box in your rule of CSS selector to target the report only in this region:

  #report-A table.uReport>thead>tr>th {
    color :red !important;
  }
  

• Bind two reports

  Hi all
  
  I need to link the two reports. I use 'action' 'value of link based' on report a. Action link - "navigating the BI content."
  The B report opens. How B report cannot display the results of report A game. For example, the user clicks on a 'Z' acct_no on A report and he B report should show details of acct-no 'Z '.
  
  Any help is appreciated.
  
  Thank you
  
  Sonya

  It should be the same column and not just names.

  Solutions:
  1) pull on the same column in the B report and that he invited.

  OR
  (1) create a report hidden with acct_no in the same table that the report is and he prompted.
  (2) now in the report B filter the results based on this hidden report.

  It may be useful

• Update the two reports

  Hi, Udo!)
  I have a simple page with two reports and a button that triggers the dynamic action. Has dynamic action of two real actions: update region 1 report, refresh the report region 2. Everything works fine on my local EPG and apex.oracle.com, but on my local OC4J + APEX 4.0.2 + APEX LISTENER 1.1 and glassfish + APEX 4.0.2 + APEX LISTENER 1.0, I have the following problem: dynamic action refreshes only region (which is the last of the true-action list). The same situation with several functions $a_report on a page. Is a bug?

  Hello

  the request-response model seems to be OK. Firebug, I see three applications
  

  
  
  1. POST http://globocenter.by/apex/wwv_flow.show
  
  This request shall submit research, the two values done right. It triggers your AJAX actions.
  
  2. POST http://globocenter.by/apex/f
  
  This request argued the updating of the region of Report2 (id R11443604808899863120). The response contains the HTML of the report, including the straight section ("report_R11443604808899863120").
  
  3. POST http://globocenter.by/apex/f
  
  This similar application submits the updating of the area of Report1 (id R11441642207457758699). The response contains the HTML of the report, including the straight section ("report_R11441642207457758699")
  
  
  Now, what I discovered on your layout is the fact that the second report is in a td - leave separate. Maybe the sent of the region in the search field cannot see items below own parent. When you refresh the whole page with these parameters, I2 is thus made correct.
  I do not think, it is a problem with the earpiece of the APEX. The behavior is the same when I (accidentally) tested with EPG.
  You can try the same reletive plan reports to the search box. Eventually, it would be useful to move the search go up a level, so the two reports are childs of it.

  -Udo

• Navigation between two reports

  Hi all
  
  I have two reports with two columns
  REPORT1
  column 1 | column 2
  1---------------2
  3---------------4
  Report2
  Column3 | Column4
  1---------------2
  3---------------4
  
  I would like to navigate report 1 report 2 when the user clicks on the values of column 2.
  For this, I added the navigation link in column 2 properties in report 1 and set the column 4 "is invited" in the report 2
  
  but I can't filter the report 2 based on the value that the user selects in the report 1
  valueOf column2 = valueof column4 is not passed to the report 2
  
  Someone has an idea how to do?
  
  Concerning

  Try to replace the quotes "on a 22%.»

• two reports in the same section

  Hi all
  
  I would like two have 2 different reports in the same section, one close to the other (no cushion).
  The dashboard page should look like
  
  Section1
  ---------------------/
  command prompt
  ----------------------/
  Report1. Report2
  ----------------------/
  
  is there a way to make this cause I could only add sections vertically and horizontally (not able to put one report next to each other in the same section)?
  
  Concerning

  Add two reports to the same section and click on the 'Properties' button on the section header. Check "Organizing horizontally" and the two reports will be displayed next.

• Problem in trying to share a search box with two reports

  Hello! I have two reports (report 1 and I2) in two different pages. In two pages, I have the same list of selection (Item1 and Item2). I want something to choose in the list (Item1) Report1 selection and my choice to be saved in the select list (Item2) Report2 too. Can someone help me please?
  Is it possible to have a list of selection for the two reports?
  
  Thanks in advance for any answers...
  
  Published by: user10642834 on May 8, 2009 10:15

  Hello:

  You can set the selection list in a region on the page 0. Apply a condition on the region to only show for pages containing your reports.

  CITY

• Two reports in a region?

  Hello
  without doubt, this has been discussed before but this is.
  
  Is it possible to have two reports within a region of APEX?
  
  
  Alexander.

  Hello

  Assuming that you want to have two or more, reports that resemble a single report, see: Re: Questions about reports

  Andy

• generate two reports the same performance xml

  I need to generate a summary report and the detailed report of execution even.

  Detailed report will record all operations marked as result Record

  Summary report to record only the steps that are of type success/failure, Digital Test limit, limit test String and MultiNumeric.

  So far, I was able to generate two detail of execution even report and can save each report in separate folder.

  How to get summary data and detailed report of the sequence running?

  Give this one a try.

  I have only a single sequence Recurse result list that you call your sequence of test report reminder.

  I hope that makes sense.  Let me know if you have any questions.

• Skype opens apparently two outgoing calls at once

  It's on Fedora 17 for the moment, but if I make a call (even the Skype test call), Skype seems to put in place two (or more) calls with on a three second delay between them. So audio is intercalated between calls and it sounds terrible.

  Has anyone else seen elsewhere? If so, how can I get it to work properly. 17 64 - bit Fedora using XFCE, Skype 4.2.0.11.

  Rick

  After reading the other posts, I had a ' yum reinstall alsa-lib * ', so stop Skype and rebooted. And the problem is solved!

  It's a little scary as to why it was fixed, but I'm OK at this point.

• Change the sequence of commands to generate two reports by USE with different names.

  I have a special situation for the model of batch processing.

  Each DUT consist of two distinct products that need to be tested as a single unit.

  I can run every USE and generate a test for each report.  -aka. The standard use case works very well.

  However, we would like the records using this method. So I need a copy with a different name for each series.

  The idea behind this is that we have a story running for each half of the UUT. Given that the two halves will probably never meet.

  I looked at the BatchModel.seq and read some of the documentation, but I'm having a hard time to understand what is happening.

  

  I guess the items highlighted above are where the object to measure reports are generated. However, I don't know the mechanism for giving them the names among the Options report-> report menu Pathname file or how to change between these two points in time. Also are there tricks to get the report in duplicate with a different path in this configuration.

  All links to the relevant information would be useful. Thank you

  Just copy these two steps and between them and the copies have another step that is just a statement.  There, you can change the path of the report by setting parameters. TestSocket.ReportFilePath the new path.

  Ideally what you would do, is that the client using a callback.  So, your code would look like this:

  Write the object to measure report

  Write the report of the object to be measured (on the fly)

  Define report path reminder (override in customer OR statement step)

  Write the object to measure report

  Write the report of the object to be measured (on the fly)

  Hope this helps,

• Is it possible to join/merge two conference calls in MCU for one call in the same MCU

  Situation - endpoint is part of two meetings of MCU (with one call on hold).  I want to merge these two meetings to the MCU.  Is there a way.  MCU is 45xx series and this is a deployment of VCS - MCU.  Thanks in advance.

  No way to merge that I know, I've had similar scenarios and there is no automatic way to do it, the Conference, the participants will have to unplug one and join the other.  Multiway will not work because that is intended to the unique endpoints being transmitted to a MCU, no MCU is not lift themselves.

• Interactive and first two report lines "BOLD"

  Dear gurus,

  I have an interactive report with 3 select parts.

  Selects the first two create a line for each.

  The third will generate up to 150 lines.

  I am looking for something simple and good to get the first two lines / selects "BOLD"?

  Suite structure is used (not the exact code):

  Select null null, one, two,... from double

  Group of...

  Union of all the

  Select null, null,... from two

  Group of...

  Union of all the

  Select null, null,... twice.

  Someone at - it an idea?

  Hello

  Thank you for your help.

  I want to just use the first 2 rows, I use following code Javascript: (when the page loads)

  If (document. GetElementsByTagName)

  {

  var table = document.getElementById (gTable);

  lines of the var = table.getElementsByTagName ("tr");

  Rows.Item (1).style.fontWeight = 'bolder ';

  Rows.Item (2).style.fontWeight = 'bolder ';

  }

  Thanks again for your help

  This problem is solved

• Oracle report calling in a PL/SQL block

  Hi all

  I need to call an Oracle (10g Developer Suite) report in a PL/SQL block. I read online that the same can be achieved using the utl_http package.

  Are there documents or links that tells how the above is achieved with an example? Also how to set the URL of the report?

  Oracle DB Version: 10.2.0.5.0

  Thanks in advance.

  AKS

  Use the package instead of srw. It is easier to use and has good debugging options:

  With the help of event publication

  (it is 11g manual, but it's the same thing for 10g).