Two signatures of the same person into one document

Similar Questions

• Merge two threads in the same person into one iMessage

  I know that this issue has been addressed before. Most importantly, the discussion was on did not understand what the problem is.

  So let me try to explain.

  Tarzan has an iPhone and an iMac, Jane also has an ios device.

  When Tarzan Jane sends an iMessage with his iPhone, Jane receives from "Tarzan" (the iMessage was related to his phone number)

  Now, when Tarzan sends Jane an iMessage of its iMac, Jane receives from "Tarzan", but in a separate thread. (This iMessage was related to his email address)

  Now Jane is in danger and she wants Tarzan to rescue her, she grabs his iPhone, opens the last conversation with Tarzan and Tarzan 'Help texts

  But Tarzan in the jungle and he has only his iPhone with him.

  Jane get killed because the imessage is sent to the iMac of Tarzan and not to his iPhone.

  ====

  The problem is, you get two threads in the same person, are sent to the e-mail address associated with the iMessage, one for the phone number.  But you can't see the difference between the two (except when you dig deep into the background-info).

  If my suggestion of Apple is, they appreciate Jane's life, fix this problem soon: merge those two threads into one.

  PeterSmith wrote:

  I know that this issue has been addressed before. Most importantly, the discussion was on did not understand what the problem is.

  So let me try to explain.

  Tarzan has an iPhone and an iMac, Jane also has an ios device.

  When Tarzan Jane sends an iMessage with his iPhone, Jane receives from "Tarzan" (the iMessage was related to his phone number)

  Now, when Tarzan sends Jane an iMessage of its iMac, Jane receives from "Tarzan", but in a separate thread. (This iMessage was related to his email address)

  Now Jane is in danger and she wants Tarzan to rescue her, she grabs his iPhone, opens the last conversation with Tarzan and Tarzan 'Help texts

  But Tarzan in the jungle and he has only his iPhone with him.

  Jane get killed because the imessage is sent to the iMac of Tarzan and not to his iPhone.

  ====

  The problem is, you get two threads in the same person, are sent to the e-mail address associated with the iMessage, one for the phone number.  But you can't see the difference between the two (except when you dig deep into the background-info).

  If my suggestion of Apple is, they appreciate Jane's life, fix this problem soon: merge those two threads into one.

  IMessage works as it should.

  There is also no apple here to read your thread in this forum for a user to.

  You can send your comments here http://www.apple.com/feedback/

  If Jane was smart it would always send you an imessage using your phone number and not apple id.  Here again, you can add your apple ID to imessage on your phone.

• I have two computers on the same router. One, on Xp and Eudora normally receives. The second on WIN-7 and Thunderbird receives the same messages in code -?

  I have two computers-
  On WinXp and Eudora receives emails in normal text.
  Sometimes, the other on Win-7 and Thunderbird receives the same message in code.
  Normally, this same message is received on the other computer.
  What have I've set wrong
  GerryMcDonald

  Start with view-> Message-> HTML Original body

• Several digital signatures by the same person works does not correctly

  I was tasked to automate our voluntary process.  I converted the forms to PDF using Adobe DC forms.  My problem is that there are several signature lines, even if only one person is signing the documents (think of a mortgage application).  Whenever I digital sign a form page, asked me to save him.

  How can I have a volunteer sign multi-page PDF without saving each time?  I then want the signed form sent via e-mail.

  Thank you

  Donna

  You must use a stamp for this.

• How to send a two objects at the same layer (when one of them is already in the layer)?

  Here's my situation.

  I have the object A in 1 layer.

  I have the B object in layer 2.

  Now, I'm selecting TWO objects A and B stand together.

  I want to send both of them to layer 1 (with the object already in 1 layer)

  Adobe Illustrator CC does not allow me to do so at the command of the (objects > Send to current layer).

  I find it very annoying.

  HAVE older allow us to do it, but not the new Adobe Illustrator CC.

  Do you have a solution for this?

  Hello

  by selecting your items and the "cut-and - copy forward" on the desired direction (and unknown world selected) layer is done with two beautiful and simple shortcuts (cmd-X-Cmd + F), instead of using the object > Send to current layer which is not shortcut and time-consuming if you are working with a large screen.

  It will be useful.

• How to have separate conversations w / the same person in messages app

  Hey guys,.

  is it possible to have several conversations with the same contact but different addresses in the messages (El Cap) application?

  My problem: I have two conversation with the same person: I text him through iMessage using his e-mail and SMS (phone number, no iPhone) that appears in the application messages through continuity (or let do or what they call that). However, the iMessage cat and the cat of text message (which is separated on my iPhone) is mixed in a chat on the Mac (which is a mixture of blue and green bubbles). And when I type a message on the Mac it's a lottery if it will be sent as a text message or an iMessage. On the iPhone, it is clearly separate.

  How can I have discussions in the messages.app on my Mac?

  Thank you

  Phil

  Hello

  Create different Contacts card for him.

  

  21:13 Tuesday; 24 may 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Two RichTextFields on the same line

  I am writing two RichTextFields in the same line, but one of them with a font in bold and plain text for the other. I do this, but for some reason any the second richtextfield is not shown in my screen. I have no idea what I'm doing wrong...

  myFontNegrita = Font.getDefault () .derive (Font.BOLD, 16);
  myFont = Font.getDefault () .derive (Font.PLAIN, 16);
        
  hfmHoraInicio = new HorizontalFieldManager();
  labelInicioAplicacion = new RichTextField ("my text:", Field.READONLY |) Field.NON_FOCUSABLE);
  labelInicioAplicacion.setFont (myFontNegrita);
         
  textoInicioAplicacion = new RichTextField ("blablabla", Field.READONLY |) Field.NON_FOCUSABLE);
  textoInicioAplicacion.setFont (myFont);
         
  hfmHoraInicio.add (labelInicioAplicacion);
  hfmHoraInicio.add (textoInicioAplicacion);

  Add (hfmHoraInicio);

  Thanks in advance.

  I guess that the RichtTextField takes all the available horizontal space by default. Perhaps the style RichtTextField #USE_TEXT_WIDTH help?

• How to have two copies of the same program to install on WIndows 7 and on the desktop

  «"" "Dear help forum:»»"»

  I am new to WIndows 7, but just have not found the right research
  How to get my answer from Microsoft/Windows 7 basic knowledge.

  I have two programs. There are two versions of the same program
  ('LACE') One is the version 4.0.1, and the other is Version 4.0.6.

  I wish I had one old continue to run (using a purchased
  Product key which I own and have for years).

  BUT there is a problem. The old and new programs are the
  same 'setup.exe '? Download 124 MB each. There are small but
  many corrections and changes in the new program, I am told, but
  they do not have add up to change the size in MB of the program.

  SO I'm in trouble when I'm trying to download the program, as
  It seems to be in WIndows 7, a small program that removes the
  size of the incoming download and informed me that I can not download
  a new that I have already one of this program is installed in the
  computer!

  He asks me if I want to "Uninstall" the previous version and then replace
  It is with a new one. I can't cancel the old version because she had a
  Product key that was told to me in the instructions that he could
  only be used 'once', to uninstall the program won't help
  me as I won't be able to continue to use this program once again, as the
  registration code could only be used once.

  I have a purchased code new, different program version 4.0.6.

  Is this a problem with WIndows 7? I already called/sent the
  company and they have no help and no solution for how these two programs
  are to run on the same computer at the same time.

  Can you please help me and provide instructions on how I load
  This program of "LACE" most recent second size 124 MB and even download
  name in the computer (replacing the automated duplicate program
  prevention installer routine), so I can have and use two copies of
  This program on the computer at the same time?

  During the creation of this issue, I had an idea of what will happen if I created a
  second Downloaded Programs folder to contain the program setup.exe inside
  and try the operation or the opening of this place. He did not like
  the program checked the computer for the first copies of the
  LACE and identified, he was always present in the computer and asked
  Once again if I wanted to remove it.

  Thank you very much!

  If this program is not designed for the execution of the two copies on a single installation of Windows, then you simply can't do.  No ifs, ANDS or goals.  You have never been able to do with any version of Windows, and apparently the creators of this program thinks there is no reason to do so, then you'll just have to choose one version or another.  I'm not familiar with the lace, but more recent versions programs usually include most of the older features while adding the most recent.  They sometimes make us learn new ways of doing things that make us less happy, but I'm afraid that's life in the world of computing.

  That said, I must mention that there may be alternatives that you might continue even if they are less obvious than what you suggested.  If you have the professional version or full edition of Windows, you can get XP mode free you can start Windows 7.  It normally happens in 15 to 30 seconds and you could install and run another version of your program under that.  If you do not either of these versions, you can invest in the Anytime Upgrade and do it available.  Upgrade Home Premium to professional is $ 90.

  The other alternative would be a dual-boot configuration where you could have two versions of Windows in separate partitions, so when you start your computer, you can select the one with the version of your program you want.  I think that the choice of the XP mode would be preferable because it would be so much easier to use, but these two options are available, if you want to continue.

  Good luck.

• IMessage Apple Watch has two interviews separated with the same person?

  My new Apple Watch has a problem with iMessage and I know how to fix this on my iPhone but not watch?

  On my iPhone, that my ID apple is connected to more than 10 devices and sometimes when a new device is added, it adds the addresses on my apple for iMessage and FaceTime ID and I always fix by unchecking the addresses that I don't want in the application settings under "Messages" and "FaceTime." However, this isn't the same thing to watch because there is no option in the settings on the Apple Watch and the watch App on my iPhone.

  I would like to help please?

  Hello

  Apple Watch uses the same parameters (for how you can be reached and how new conversations are started) for Messages as your iPhone.

  If you have two interviews separated with the same person, the following steps may help:

  • On your iPhone, check if there is more than one contact form in Contacts of this person (if so, remove duplicates).
  • Delete old Messages conversations with this contact on each of your iPhone and watch:
    • iPhone: app Messages > swipe to the left on a message thread > delete.
    • View: Open the Messages app (from the home screen, which is accessible by pressing the digital Crown) > swipe to the left on a message thread > tap on Trash / delete.
  • On your iPhone in the app Watch: Watch My > general > reset > press reset sync data:
    • You won't see anything happen after pressing it (the process runs in the background, invisible to the user).
    • Leave a minute or two to allow the course ends.
  • Restart your iPhone and your watch (turn the two together off the coast, then restart your iPhone first):
    • Restart your iPhone, iPad or iPod touch - Apple Support

    • Restart your Apple Watch - Apple Support

• My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?

  My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?

  settings - phone - call another device - off.

  One of you should get their own apple ID, you just go to have problems later.

• How put two windows (both sides) will appear on the same screen together, one behind the other, during run mode?

  In Labview, is it possible to put two windows (both sides) appears on the same screen together, one behind the other, during run mode?

  It's a shame

  Secondary, it's a great way to call subVIs and you load only code when you call it, so it ease your use of resources.

  Anyway, you can call Vi as pop up:

  https://decibel.NI.com/content/docs/doc-2064

  You could split your FP using the separator.

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/creating_splitter_bars_and_panes/

  Or you can use the control tab.

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/creating_tab_controls/

  Regars.

• I can't have multiple files open at the same time! I need to compare the content from one to the other. How to display two files at the same time?

  I can't have multiple files open at the same time! I need to compare the content from one to the other. How to display two files at the same time?

  Hi sindres79946597,

  Open Acrobat Reader DC, navigate to the Edit-> Preferences-> General-> uncheck "Open Documents in the new tab in the same window.

  Now, reboot your system, when you open multiple PDFs that all will open in a new window so that you can easily compare.

  Kind regards
  Nicos

• Use hp officejet 5610 all in one and hp scanjet g4050 (the two usb) on the same computer

  Have an officejet 5610 that I used for years to digitize documents, faxes, printing and copying on Acer computer with windows XP. Recently, I moved my scanner flatbed scanjet g4050 wifes to my computer to scan photos and negatives. The problem is when I install the G4050, I can scan is no longer with my Officejet 5610. Get an error message; "An error occurred just by contacting the HP imaging device. Try the following steps. Turn off and unplug for 60 seconds. The cord is properly attached. Reset. Uninstall and reinstall the device. Reinstallation of photosmart software.  Have tried all these. Does not help unless I have uninstall and remove the two devices and reinstall officejet 5610 ONLY. If I reinstall G4050 default folder which is recommended for multiple hp devices work properly then the 5610 can sweep is no longer. Error message as above. Running scan doctor and it says that there is a problem of façade. Go to the solution Center, click settings, scan settings, scan to Setup. When I click scan to Setup, I get the same error message as above. Both devices appear in the HP Solution Center each with its own tab. Is it possible to use these two devices on the same computer?

  These two devices will not be able to work together. The ScanJet uses a newer than the 5610 software the 5610 will not work with. You can try to install the ScanJet, then the 5610, but I don't think it will help. I'm sure that just does not allow two devices on the same computer because the software conflict. I'm sorry.

• How can I separate two movies on the same timeline?

  I use the first elements 11 but that you him have not used for quite awhile so I forgot much of what I learned. So here's my question: I have two movies on the same timeline. How can I separate them. In other words, how can I move one on the timeline, so it won't confuse my editing on the other? But better yet - how can I make a movie on the timeline completely and change it later as a separate film. I have really four shorts - a minute long. I would like to change separately, with a new file name. I don't know how to do that more.

  Tommyvincent

  I did some research on the issues that you have raised in this thread.

  Comments...

  1.

  After you import a video into the assets of the project, you can right click it, select Rename. This file when you drag the timeline will have the new name.

  But...

  If you import a video into the assets of the project, drag it to the timeline, right-click clip timeline, select Rename from the pop-up, then the calendar file will be renamed but not its thumbnail in the active project. You rename this project asset vignette to match if you want. However, these traces yet files renamed to the original with original filename to its disk hard saving location.

  2.

  All down your Timeline... one way would be to export the clip selectively if she was included in the Group of the clips on the Timeline. Two conditions for

  a. change box, set the gray tabs on the work area bar to expand on the segment to export

  and

  (b) in the field of export, have a check mark next to the option "Action work area Bar only.

  3.

  If you have made a clip in the active project, double clicked to open the preview window, you can cut the clip with the points put in and Set Out and create "subitems" with new names in the active project. These "subitems" would be part of the media of this project which could be moved to the timeline when necessary.

  Please review and determine if all the foregoing is in the right direction for what you want to do.

  Thank you.

  RTA

• Run different applications in Creative Suites on two computers at the same time.

  I have a backlog of mini tape DV from my vacation for 10 years.  The rear reason is because slow computers have made a personal production until the very slow DVD creation.  I've recently updated to 4-core i7 with unique HDs and on the point of buying a custom built 6 hearts i7 with SSD and RAID HDs.  I understand that I can install Creative Suite Production Premium 5.5 on two computers.  One facility is already on the coreI-4.   I intend to install the second installation on the 6-core.  I would use the 6-core for production, while the 4 - core is the capture of DV cassettes.

  If I had bought a copy of an application separate and installed on separate computers, I'd be able to run them at the same time.  Is there a way I can run two computers at the same time with Creative Suite to accelerate personal production for example can I run separate from the Creative Suite applications, I want to use separate programs, on two computers at the same time, as long as these requests are not the same?

  You can run the same or different adobe products to the same or different times on the same or different computers (except that you can not run the same program more than once on the same computer at the same time).