Two unexpected local variable when iterating over the array of containers.

Similar Questions

• A way to return to the controls at the top of the files and thumbnails when hovering over the name of the file?  I can't even read the sticker because it has been moved to a separate column on the right.

  A way to return to the controls at the top of the files and thumbnails when hovering over the name of the file?

  I can't even read the sticker because it has been moved to a separate column on the right.

  Hi Bobca,

  I'm sorry, but the forecast of nail has been deprecated in the latest version due to security problems.

  Kind regards

  Nicos

• Local variables are comparable to the value property of a control or indicator?

  I use the buttons / switches mechanical locking action, event structures and local variables to track the status of my switches.  I used local variables with indicators, too.  Now I see that this could be done via the node property of a switch or an indicator.  Should I use the nodes property instead of local variables?  Should I use "switch" mechanical action and control the State of the control buttons / switches?  I used a mechanical locking action because it automatically reset when it is read, but who pushed me in the use of local variables.

  I know the property values to adapt the data flow model, while local variables might be placed in a sequence structure to ensure the order of execution.

  I just don't want my program all except if it is a correct approach.

  Thank you

  DH

  Dark Hollow says:

  Well, I'm changing the properties of user interface in my state machine.  For example, when you push a button to START the TEST, I want to disable and gray this button and activate the button to STOP the TEST.

  No engineer too much. In this case, you can use a single button and label the FALSE case a 'start Test' and the REAL case as TEST 'STOP '. No additional code needed at all. At the same time, you only use the half-Panel space! (and 10% space diagram!)

  Dark Hollow says:

  Another example... I have a couple of dozens of LEDs on the front panel to show the TEST SUCCEEDED.  If I have the wiring all of them, my state machine diagram gets messy.

  Define disorder! In my mind, code is not held together by wire is much messier because it is impossible to determine the order of execution and so program logic. A thread is a small 1 d object. A property node is a significant 2D object. 20 wires are much less messy than 20 knots of property, especially given that each property nodes still hanging by a thread in one way or another!

  In order to reduce the number of threads, use the most appropriate data structures. Instead of a few dozen sighted use a single Bay of LED. A single wire! Keep the table in a shift register and update alone LED as necessary by using "replace subset of the table".

• How do you get the images to enlarge them when hovering over the image as in Ebay It used to work.

  I assign purchases on Ebay and some versions of Firefox there, I could have the pointer of the mouse pointer over an image and it would broaden so I could get a better view, but now it's not past and I need to know how to get this feature. Thank you

  Thumbnail Zoom more {web link}
  Show full image when you hover over a thumbnail. Works with
  Amazon, Images, Images of Bing, Facebook, Flickr, Google Baidu +.
  Google Images, IMDb, LinkedIn, Netflix, Pinterest, Reddit, Twitter,
  Yandex, YouTube, Wikipedia, Yahoo Images and much more.

• Glimpses of well site in Firefox locally, but when I published the site all of the text is the wrong size

  I'm a web designer from recruit. I recently created a site using CS6. http://www.joshuahetzler.com when I presented a preview site in Dreamweaver, it seemed fine in Firefox and IE. I published the site and now it is messed up in Firefox. All of the text is the wrong size. Does anyone know how to fix this? It has something to do with my hosting provider? (I deleted a wordpress site in the directory a hourago and put this new site in its place) Why IE will display correctly, but not Firefox...

  Caused by a bad link to your site's CSS file.  It's pointing to a file on your hard disk local that no one but you can see.

  Open your template and reconcile the path to the folder of your site.  Probably, it should look like this:

  Save the model.  Fill out the changes made to the pages of the child.  Download the child pages.

  Nancy O.

• documents of fact pending does not print when printing over the network

  Hello!
  Everyone! I have a problem, my printer don't Tróchez not print when I tried to print a copy using network.
  When I tried to print via USB cable, it works well.
  I don't understand how this problem can be solved.
  Kindly help me.
   
  Printer model: HP LaserJet M1120n MFP

  Hello

  Looks like the printer is not on the network or the ip address may have changed

  Please download and run the doctor for impression scanning HP, it will identify and solve the problem...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-120773-1&cc=us&DLC=en&LC=en&OS=4062&product=3447598&sw_lang=

  or you may need to reconfigure the printer to the network and to reinstall the printer drivers on the computer...

  Although I am an employee of HP, I speak for myself and not for HP.

  * Say thank you by clicking on the "Bravo!" Star"located on the left *.
  Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem.

• Iterating over the elements specific to the screen (web page)

  Hi guys and girls,
  
  I feel stupid for not being able to solve myself, so I'm glad to know that there a wealth of experience and talent to help...
  
  My question is this:
  I have a web page (screen) full of items of different types, for example
  .. /Web:IMG[@ALT='Enable update "or @index = '26']
  .. [/ 'web:img[@alt='Details or @index = ' 25']
  .. [/ web:td[@text='Ongoing' or @index = '62']
  etc.
  
  I want to find the img and then iterate over their index. Iterate no problem.
  
  However: can one tell me how to identify images and bring them into a list?
  Something like a ' for each element e; If e is an img; {do something}
  
  Your help is appreciated.
  
  Rgds,
  B

  If you want to delete objects whose attribute value null, use code with the following previous code

  for(int count =0, i = count; i< images.size();i++){
            if(images.get(i).getAttribute("alt") == null ){
                 images.remove(i);
                 i=count;
            }
            else{
                 count++;
  
            }
       }
  

  Note: Here also alt with the attribute that you want to change

  Kind regards
  Dembélé M

• Iterating over the controls

  Hi, I'm new here and new Flex3, but really like what I've learned so far.
  
  But I encountered a problem. How do you iterate controls/components? In VB.net, you should do something like:
  
  For each myControl as control in Me.Controls
  "do things here
  Next
  
  I tried to watch using containers / canvas as a container for travel, but I can't understand how in fact a loop through the controls - it's for a simple text validation feature. Everything seems to point to the ' For Each... in ' statement, but... I'm stuck.
  
  Thanks in advance

  Try this:

• How to use the elements in the array

  Hi, I am trying to automate a questionnaire using table.

  In the compositionReady for the scene

  SYM. Actual = 0;

  sym.arr = ['Hi', 'Love', 'You'] / / this is my picture of the issue.

  sym.checkArr = function() { / / this function I use to check the issue table whis I'll use.}

  sym. Question = arr [real];      I want to use the value 'Hi' and then increase my 'real' var and then use the value 'Love '.

  }

  In my symbol calendar, I use a trigger in the trigger that I use

  SYM. Stop();

  sym.quest = sym.getComposition () .getStage (). Question; / / I get the value of the Question;

  Sym. $("Ask") .html (quest);                                                        "Ask" is an empty textfield;

  sym.getComposition () .getStage (invested) ++;                    Increase 'real' for the nex time.

  But the code does not work, I think that the problem is the way I use the array index.

  Help, please!

  Thank you =)

  Hello

  chino_10 wrote:

  at the outbreak of timeline you why did you use a local variable?

  It is advisable to use local variables when possible. The quest variable apply only to this trigger, and it will not be postponed to another trigger in the same timeline. So when you use a trigger to set the HTML for a text element in the same timeline, I find cleaner to assign a new value of a local variable HTML.

  chino_10 wrote:

  and if you call the 'real' global variable of Manager compositionReady of why didn' there you call him with all the way like ' sym.getComposition () .getStage (invested) ++; '?

  I think I have didn't express it as clearly as I could have. When you declare sym.actual in compositionReady, you actually declared a variable whose scope is the symbol of the main stage - it is not a global variable. To declare a global variable (which is not always recommended), your code in compositionReady would be:

  real = 0;

  This real variable would now be accessible from any element/symbol in the composition simply by assigning a value to the membership. You can see how quickly this could be embarrassing.

  So back to the scope of variables: If you declare a symbol variable using sym.varName, any element in the same scope may call using sym.varName. If your main scenario triggers can call without using the full address of sym.getComposition () .getStage () invested ++. Instead, you can simply use ++ sym.actual. Less code and easier to read. But if you call from another symbol (outside), you need to use the full, addressing the address actually the variable, i.e., sym.getComposition () .getStage () invested ++.

  HTH,

  Joe

• Code to skip the steps: initialization of local variables failed

  Hi all

  I'm upgrading some software LabVIEW RT I inherited LabVIEW 2011 to 2015 LabVIEW (32-bit) on a host Windows 7 Professional PC. The target is an SMU-8135. The software ran well when it is compiled under LabVIEW 2011.

  I modified the code to enable the monitoring of what is happening by looking at screen on the target outputs. The initial error that brought me here is that a local cluster variable initialized in the first window of the flat sequence described below have been appearing as the in windows later.

  The code begins with the initialization of local variables in the first window of a flat sequence and provides a quick line of text output to the display of the target (call this text #1) (using RT Debug String.vi) I send two lines of text so that a new row is created and later text does not replace it. . It then writes to the next window in the sequence flat screen two groups of text output to the target. Second text in the window 2 (#3 text) output is equipped with a wire entry from the error from the first text output in the second window (text #2). That is the second exit must wait for the first exit to complete before being sent to the screen.

  I see now some weird symptoms:

  1. when I connect to the target under a remote debugging session I see expected display outputs. Not remotely connected, text #2 is displayed. The code passes to the third window in the flat sequence, so everything in the two window should have executed.

  2. the text #1 appears on the target screen * before * I get the message "Welcome to LabVIEW Real-time 15.0." Is this normal? Whence this message? I searched my screws and subvis to this text and it is not there then it mucst come LabVIEW screws somehow.

  This all started with local variables no initialization in the first window, so apparently, I have a problem of data flow. Given that the problem disappears under the remote debugging, I'm a bit of a loss.

  Thanks in advance for any help,

  Eamonn McKernan

  EamonnMcKernan wrote:

  Text 2 appears only when remotely connected it does not appear when running at startup.

  Your "text 2" seems to be powered by a collection of nodes comments to "initialize on compile or load.  This will return once the empty string the first and therefore should not be display nothing until the code I run a second time.  That is the crux of feedback for?

• FOR loop does not update the local Variable

  I am newer to labview, and I can't wrap the head around why not a habit of local variable to update in the code if it updates on the dashboard. Anything im missing?

  Assume that you are talking about the local variable of the 'State of the cell. The terminal updates every 500ms in the small top loop, the local variable indicates simply that the indicator and thus updates also.

  The problem is "dataflow" and you need to familiarize yourself with the concept!

  Once the while loop starts, the local variable is reading and inside the loop begins. Most likely, the local variable is read before it is updated in the small loop, so most likely returns the value of a fade on the first iteration of the while loop. Now the small loop continues to go twice per second for about five seconds. Only after the loop FOR (and everything else inside the while loop) completed, the while loop will go to the next iteration, date on which the local variable is read once more, this time with the last value of the last for loop iteration of the previous iteration of the while loop.

  In summary, the local variable updates very well, it's just that the code does not read the new value around most of the time.

  Your VI is full also potential competition conditions caused by the over-use of the local variable. You need to respect the proper execution order by eliminating local variables.

  So what is the solution? Hard to say without knowing what the VI is supposed to do. Most likely, you will need to remove the inside OF the loop and use it outside while loop for everything.

• By the way the local variable to a default module

  I use LV 8.6 and TS 4.1.

  I made a custom step Type where I specified a default Module to run and I created a substep VI Edit that the user can move the entry to the default maodule.

  If I pass a value it is working properly. So, I want to pass a local variable, so I have a button in the edict Vi, which displays the property browser dialog box I get the name of the selected local variable. How can I pass the local variable to the default input module? (The value of the local variable is installed during the execution of the sequence).

  Thank you.

  Max.

  Hello

  Yes, I see what your problem is.

  If I am proving a means of suppling a variable as a fixed value or a search string then in my step type I organize the property as a container that contains two properties, one to hold the value and one the search string.

  If you don't have what it takes to change your step types, then you must indicate another to contain this search string, IE a local / fileglobal / global station. Or store it in the memory of your labview. None of them are ideal, as it is best to keep the properties of the step in the step.

  Concerning

  Ray Farmer

• How can I get the changed data in a def type control containing an Xcontrol with a local variable

  Hello

  I did an Xcontrol and I inserted this control in a def type.

  When I want to change the data of the control with a local variable in a VI the VI change nothing. The change of the data is not complete

  How can I fix this problem?

  Thanks for your help

  Hello

  What is your version of LabVIEW? You have a simple example program that demonstrates this behavior?

  I found an other discussions related to your problems with Xcontrols:

  update of type defs Xcontrol faade

  No data change event generated for an XControl in a Type definition

  XControl facede.vi

  I hope this helps.

  Kind regards

• Change local variable boolian Programaticaly

  Hi all

  I came across something today, that I have ever dealt with in Labview...

  I downloaded a driver of instrument for a power supply, and got it working OK (using VISA on the USB communication).

  The example program pilot itself works very well and is a quasi State machine.  It it turns on and off and adjusts the voltage and current correctly, as it should.

  Then I need to edit the .VI to add a time on another timer .VI.  I wrote that the small simple VI and it works properly as it should.

  It's just a boolian power timer.  Lights at 08:00 daily, stops at noon every day.

  The problem I have is the boolian called variable "Output (T:Enable)" which is located in the .VI power supply example is a Panel button, but it is called several times as a local variable.

  (once again, I did not write this part and please no lectures on why you should never use a local variable...)

  When you change the State of the button "Output (T:Enable)" Panel, the power supply turns on and off as it should.

  The problem comes when I try to control this value boolian using my timer VI.  I've tried several things, and using debug, I can't 'Output (T:Enable)"to change state.

  The value will change ONLY if the button is pressed or not.

  ATTENTION: The illustrated local variable condition is also a security in case of short or overload, power off if the name cannot be changed.

  Is there a way I can trigger "Output (T:Enable)" using 'My exit timer' but always make sure that stop you it if there is a short circuit?

  This left me speechless... I tried several different things and just can not understand.  Any help would be appreciated.

  

  Thank you!

  The guy

  Hello guy!

  You are not sure, I understand the problem in its full extent, but I'm guessing that you want to trigger the event that controls the output (T: Enable)? If you want to programmatically, create a node of the control property and use the property "value (follow the signs). Writing of a local variable will not draw the event, although this will change the value of the façade.

• Question about local variable in LabVIEW

  I am a new bie to LabVIEW.

  I have a question about local variable in LabView.

  I tried to stop a loop by the local variable, but the value of the loop for counter is different with my hope.

  I think that the loop to stop at 6, but he stopped at 7.

  Could someone help me?

  This looks exactly like a race condition.  You have know control if the control terminal is first in reading or the local variable is written to the first.

  Try to run your code to highlight execution.

  In your code, what usually happens is that order is read and the value is false.  Then the other code will run allowing the value to write to the local variable.  Let's say that in a particular loop iteration, we get the True value.  But control of the final value has already been read as false, then the loop runs again.  The next iteration of the Terminal is read and then he sees the true, will force to stop no matter what happens in the rest of the loop the loop.

  So, why do you use a local variable instead of sending just the wire to the terminal stop?