Access denied to the CBS.log file

Similar Questions

• I have can´t of the cbs.log file

  Hello world

  It seems that never ends, now it s the file cbs.log that says access denied.

  OK, after you have installed successfully (and finally) sp1 of vista, I ran once more the chkdsk and sfc/verifyonly to verify if everything was ok, as if it was before I ve installed sp1, which was: no no violation of the integrity of the errors found, files damaged, everything seemed just fine for me, but now After installing sp1, the sfc/verifyonly said that Windows found violations of integrity resources Protection and the details are in the cbs.log file, which I was able to access so far, but now, when I try to open it, it says "access denied" - what happened between that made the system go like that and can it be resolved?

  Anyway, desperate, I tried a sfc/scanow in the hope that it would solve this problem, this 'thing', well actually he pointed out that the Protection of Windows resources found and managed to repair damaged files and details could be found at c:\windows\logs\cbs\cbs.log, but as I said before when I try to open this file it says access denied.

  So I rebooted my pc and hope that everything would be ok, given that the sfc/scannow said that the files when repaired, so I thought. Unfortunately, that s not the way it is, after the reboot, I ran sfc/verifyonly, just to confirm that everything was actually ok, well it still signals once Windows Resource Protection found violations of integrity and the details can be found in the cbs.log file.

  Right now my computer seems to work very well, besides that of course, the problem is I m feling completely lost here with this 'thing', it just doesn't feel good and probably it's just me, maybe I m too picky about this stuff, everything must be running ok so I can be at rest with myself, please can someone help me with this , can someone explain me what is happenning, so I can understand it?

  I think that worst of all, at least for me, is not to know what is happening, it s as I have, I would even say obcessive, need to understand not only the solution but most of all the cause of it, the mechanism of it s, I need to understand the process, don't´t you all?

  Pleeaase helps.

  Well be Pedro Borba

  Pedro Borba,
  You must copy the CBS and paste it on your desktop or Documents folder.  Then, open the copied version of the file.  Here is an article which also gives instructions on reading and research the CBS log file.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message "Access denied" on the sharing of files and folders on a dual-boot computer.

  I have a Dual Boot PC - the two Windows 7 Home Premium - one 32-bit, 64-bit.

  If I try to access files created in the 32-bit system to the 64-bit system, I get "Access Denied" errors. This is extremely annoying as its my PC, my data, my everything!

  The only way to solve the problem seems to be to give all permissions to "Everyone", but then I get my parcel Internet Security complain bitterly that my PC is now open to piracy because I gave "Everyone" full access permissions.

  I searched the Web and Microsoft, but I never seem to find exactly what I'm looking for; part of my search text seems to have more weight than another. For example, I add "in the system to dual-boot" and I get links to creating a dual boot system.

  If anyone has any suggestions on how to grant permissions to access 32-bit system folder to the main user on the 64 bit system, I would be very grateful.

  Thank you very much.

  David

  Hi David,

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  I suggest you try the steps from the following link:

  "Access denied" or other errors in the access to or work with files and folders in Windows
  http://support.Microsoft.com/kb/2623670/en-us

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Can someone help me interpret the results of a log cbs.log file?

  My laptop worked little strange - gel sometimes and only excessively slow.  I ran chkdsk /f checks and / r.  Both went well.  I then ran sfc/scannow.  The results of this analysis are displayed below.  I'm not a pc expert, so I don't know if I'm all together or if there is something else, I have to do.  Specifically, the last line of the cbs.log file says, "Verify and Repair Transaction completed. All of the files and registry keys listed in the framework of this operation were properly repaired".

  Any help would be appreciated!  Sorry for the text copy/pasted for a long time.  I cut about 99% of the out and about 1% of the folder (due to a limit of 60 000 characters) just left.  I couldn't find a way to attach a file.

  Thank you!

  POQ 64 ends.

  2012-10-09 22:06:25, Info CSI 00000171 [SR] check complete

  2012-10-09 22:06:26, info CSI 00000172 [SR] components check 100 (0 x 0000000000000064)

  2012-10-09 22:06:26, transaction Info CSI 00000173 [SR] beginning verify and repair

  2012-10-09 22:06:37, info CSI 00000174 Member \SystemRoot\WinSxS\amd64_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_2ce6c04cdc275758\settings.ini file hashes are not actual file [l:24 {12}] "settings.ini": "

  Found: {l:32 b:sKFy6962 + 2YBWdYMZ6Z/UOVMGpEOdEczYmmYd2o9CE4 =} expected: {l:32 = b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o}

  2012-10-09 22:06:37, info CSI 00000175 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2012-10-09 22:06:40, info CSI 00000176 Member \SystemRoot\WinSxS\amd64_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_2ce6c04cdc275758\settings.ini file hashes are not actual file [l:24 {12}] "settings.ini": "

  Found: {l:32 b:sKFy6962 + 2YBWdYMZ6Z/UOVMGpEOdEczYmmYd2o9CE4 =} expected: {l:32 = b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o}

  2012-10-09 22:06:40, info CSI 00000177 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2012-10-09 22:06:40, info CSI 00000178 [SR] this element is referenced by [l:162 {81}] "' Package_17_for_KB948465 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.0.1.18005.948465 - 60_neutral_GDR" "

  2012-10-09 22:06:41, Info CSI 00000179 repair results created:

  POQ 65 begins:

  2012-10-09 22:17:24, info CSI 00000301 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2012-10-09 22:17:24, info CSI 00000302 Member \SystemRoot\WinSxS\amd64_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_2ce6c04cdc275758\settings.ini file hashes are not actual file [l:24 {12}] "settings.ini": "

  Found: {l:32 b:sKFy6962 + 2YBWdYMZ6Z/UOVMGpEOdEczYmmYd2o9CE4 =} expected: {l:32 = b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o}

  2012-10-09 22:17:24, info CSI 00000303 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2012-10-09 22:17:24, Info CSI 00000304 [SR] this element is referenced by [l:162 {81}] "' Package_17_for_KB948465 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.0.1.18005.948465 - 60_neutral_GDR" "

  2012-10-09 22:17:24, info CSI 00000305 hashes for Member file? \C:\Windows\PolicyDefinitions\inetres.ADMX are not real file [l:24 {12}] "inetres.admx": "

  Found: {l:32 b:DjclSPQ + c3ju7E53XXW47eR94SH7ICruHSUKg8YAkO0 =} expected: {l:32 b:3 T / Xc + 0 k/wBxJ4k/vlPd86jLOYtWOjRsHrz0hHH9H8s =}

  2012-10-09 22:13:42, CSI 0000027e Info [SR] repair corrupted file [ml:520 {260}, l:64 {32}] '------? \C:\windows\policydefinitions"\[l:24{12}]"Inetres.ADMX' of the store

  2012-10-09 22:13:42, CSI Info 0000027f WARNING: file [l:24 {12}] "inetres.admx" in [l:64 {32}] '-? ' "" \C:\windows\policydefinitions' switching property

  Old: Microsoft-Windows-InetRes-Adm, Version = 9.1.8112.16421, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

  New: Microsoft-Windows-InetRes-Adm, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

  2012-10-09 22:13:44, info CSI 00000280 hashes for Member file? \C:\Windows\PolicyDefinitions\en-US\InetRes.adml are not real file [l:24 {12}] "InetRes.adml": "

  Found: {l:32 b:8uqfOni5TmKQ2 + wymJKX9uLDOmUV2H1RKpYV3gacaRw =} expected: {l:32 = b:f2Ca02GHu2Yr3ccXiLvfpdfLkfeeDX2UExmZb6pQm2U}

  2012-10-09 22:13:44, info CSI 00000281 [SR] repair file corrupted [ml:520 {260}, l:76 {38}] '------? \C:\Windows\PolicyDefinitions\en-us"\[l:24{12}]"InetRes.adml' of the store

  2012-10-09 22:13:44, info CSI 00000282 WARNING: file [l:24 {12}] "InetRes.adml" in [l:76 {38}] '-? ' "" \C:\Windows\PolicyDefinitions\en-us' switching property

  Old: Microsoft-Windows-InetRes - Adm.Resources, Version = 9.1.8112.16421, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

  New: Microsoft-Windows-InetRes - Adm.Resources, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

  2012-10-09 22:17:25, 00000306 CSI info [SR] repair corrupted file [ml:520 {260}, l:64 {32}] '------? \C:\windows\policydefinitions"\[l:24{12}]"Inetres.ADMX' of the store

  2012-10-09 22:17:25, info CSI 00000307 WARNING: file [l:24 {12}] "inetres.admx" in [l:64 {32}] '-? ' "" \C:\windows\policydefinitions' switching property

  Old: Microsoft-Windows-InetRes-Adm, Version = 9.1.8112.16421, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

  New: Microsoft-Windows-InetRes-Adm, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

  2012-10-09 22:17:25, info CSI 00000308 hashes for Member file? \C:\Windows\PolicyDefinitions\en-US\InetRes.adml are not real file [l:24 {12}] "InetRes.adml": "

  Found: {l:32 b:8uqfOni5TmKQ2 + wymJKX9uLDOmUV2H1RKpYV3gacaRw =} expected: {l:32 = b:f2Ca02GHu2Yr3ccXiLvfpdfLkfeeDX2UExmZb6pQm2U}

  2012-10-09 22:17:25, 00000309 CSI info [SR] repair corrupted file [ml:520 {260}, l:76 {38}] '------? \C:\Windows\PolicyDefinitions\en-us"\[l:24{12}]"InetRes.adml' of the store

  2012-10-09 22:17:25, CSI Info 0000030a WARNING: file [l:24 {12}] "InetRes.adml" in [l:76 {38}] '-? ' "" \C:\Windows\PolicyDefinitions\en-us' switching property

  Old: Microsoft-Windows-InetRes - Adm.Resources, Version = 9.1.8112.16421, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

  New: Microsoft-Windows-InetRes - Adm.Resources, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10 {5}] 'en-US', VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

  2012-10-09 22:17:25, created results CSI 0000030b repair Info:

  POQ 127 ends.
  2012-10-09 22:17:25, all repairs [SR] CSI Info 0000030 c
  2012-10-09 22:17:25, CSI Info 0000030 d [SR] validation of transaction
  2012-10-09 22:17:25, transaction CSI Info 0000030e Creating NT (seq 1), objectname [6] "(null) '"
  2012-10-09 22:17:25, CSI Info 0000030f NT created transaction (seq 1) result 0x00000000, manage @0x14c4
  2012-10-09 22:17:25, Info CSI 00000310@2012/10/10:02:17:25.662 CSI perf trace:
  CSIPERF:TXCOMMIT; 143298
  2012-10-09 22:17:25, Info CSI 00000311 [SR] check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

  Hello

  As noted at the end of your message SFC/scannow points out that there is no rest
  questions that he can fix.

  More information on how to easily read the important information as SFC/scannow
  adds to the cbs.log.

  Many files that SFC cannot resolve are not important.

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  put the command from below (copy and paste) in this box and her and then press ENTER.

  findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  who creates the sfcdetails.txt file in the folder that you are in when you run it.

  So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  in Windows Vista
  http://support.Microsoft.com/kb/928228

  This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
  here. NOTE: there are probably duplicates so please only post once each section error.

  You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
  You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
  (You may need to search sfcdetails.txt if it is not created in the default folders.)

  =======================================================

  Troubleshooting:
  
  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Install updates problems, cannot open the cbs.log and corrupted files

  My laptop is having a lot of problems now may not install as 16 important updates, it continues to display the 800700B error code. Then I run sfc/scannow, and then he said he finds corrupted files, but could not resolve, so I tried to open the cbs.log newspaper to for more details but he said that the access was denied (no matter in many ways, I have tried, it won't let me access it).
  So please help me to solve these problems, I don't know what the problem principal here, please help me!

  How about an error of 8007000 b? See http://support.microsoft.com/kb/956699 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot access the cbs.log newspaper

  Hello

  im running windows 8 on my computer laptop Packard bell, when I installed windows 8 suddenly, I could not access the BIOS, the Member of the staff at Packard bell told me to scan windows to find errors, and when I did I was surprised he found corruption but when he did and he repaired them the BIOS has started working again.
  I was very interested to see what caused the problem so went the cbs.log in the C:/windows/logs/cbs.log and I got the error message access denied.
  Please some on can tell me how to access this file
  Thanks in advance,
  James
  PS: the command I ran for the test was sfc/scannow in cmd

  Hello

  It's too many mistakes to even consider to manage individually.

  Suspect hardware problems.

  Again the question happens BEFORE Windows loads?

  This isn't probably a Windows problem so contact Packard Bell. As OEM Packard
  Bell is responsible for BOTH the material and the proper functioning of Windows.

  =========================

  If there is a lot of mistakes and then run update or even reset (However, you can not fix
  hardware with the software so I wouldn't them to less than the Packard Bell Support
  told to do because if there is a hardware problem, it may fail, and you may
  not be able to run Windows at all the).

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Microsoft C++ runtime error. When I am downloading World Of Warcraft. Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. (I ran sfc/scannow in the command window twice)

  I am trying to download the demo version of 'WoW' World of Warcraft. I get to the part where he is configing its parameters to my computer and get a runtime error that something caused my program is complete. I read the other posts which had similar problems so I ran sfc/scannow in the command prompt window. It reads...  Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. I've shortened, but it is easy to understand that there is a question that the scan will not fix. I tried to access the CBS.log newspaper and opened a text doc, that was a bunch of YYYYYYYYY. I'm a little lost here and my 10 free WoW trial days is weathering away without me =)

  Please help, thanks
  

  Borrow a Microsoft Vista DVD(not Dell, HP, etc Recovery DVDs) to do a repair installation

  If you see a startup Neosmart repair disk download here, this is NOT what you want.

  You want a good Vista DVD that contains the operating system files.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you need a recovery media for your laptop back to factory settings, read this info:

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• FTP error. Access denied. The file does not exist (only on the roots)?

  Having a strange problem.

  I just installed CS 5.5 and got one of my sites all over the place. I can connect to my remote server very well and download to any directory other than the root?

  If I do, then I get this error (see below). This happens only when I try and put the files at the root, don't know why. I tried all the little things like:

  -liability of the rocker

  -site to redefine

  .....

  I can use any other FTP program and I can not put the files in the ROOT, so it's just a thing of dreamweaver 5.5. I also tried my Dreamweaver CS3 on my old mac and it works like a charm!

  Any suggestions?

  Thank you!

  Started the: 18/05/11 13:57

  index2.php - error - FTP is an error - can not put index2.php.  Access denied.  The file exists may not, or there could be a permission problem.   Make sure you have permission on the server and the server is properly configured.

  Activity of the incomplete file. 1 file (s) or folder (s) have not been filled.

  Files with errors: 1
  index2.php

  Finished: 05/18/11-13:57

  The FIXED.

  In looking at the FTP log, he's in trouble with a locked file STATSHISTORY.

  So, I just deleted

• I get an error, access denied to the C:\Users\myuser\AppData\Local\Temp

  Original title: access denied to the C:\Users\myuser\AppData\Local\Temp

  Hello

  I have a problem with the Windows 7 C:\Users\myuser\AppData\Local\Temp temp folder. Sort randomly, I lose access to this folder, in the sense that if I open a cmd terminal and I try to cd to that folder, it gives an access denied error (at least that I start cmd as administrator). I noticed in the list of permissions on this folder does not appear the SYSTEM. I read somewhere that this is the problem, so I added back, and then it worked. Unfortunately it disappears every day the list of permissions, and I have to put in place every day which is annoying. Do you know what could cause this problem? How can I see which changes these permissions?
  Thank you
  Razvan

  Hi Razvan,

  Thanks for posting your query in Microsoft Community

  According the information you have provided, I understand that you found error access denied when using certain commands to the command prompt. I will certainly help you in this matter.

  1. have you logged as administrator?

  2. do you have an antivirus software installed?

  Some commands that you run at a command prompt, you need the administrative privileges for the good functioning of Windows.

  See the link.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• How to repair a log cbs.log file?

  option indexing won't show all the places, when you click on 'change '.

  Also

  When I search on the start menu, search for th IE History appears, I followed some instructions on how to stop it, but the story still appears in search results.

  I ran a scan/sfs now

  the results showed that he could not fix the following "CBS.log" file, please could you help me on how to solve my problem

  I sent my pc for lairs, thanks for the help and have plese delete you your message to my son so that I can delete my thread

• Cannot find the vmware.log file

  Dear team,

  Customer inform us that they are not access in one of the production virtual machine, I found the same thing in a State of poweredoff. I'm receiving the same and he "works fine now, but in order to know exactly what happened, I browse the directory of the virtual machine." to determine y a VM has been poweredoff, to check the logs in the vmware.log file, but I havn't found vmware.log file, there I m old files vmware.log learn where I m able to see two months of old newspapers. Can u please help me is it possbile due to some reason vmware.log is not created?

  concerning

  Mr. VMware

  Sorry, you're right, this setting is available from the GUI. Yes, make sure that logging is enabled.

  André

• access denied to the combustion process

  When I try to burn a disc double layer the trial started, no problem found, project size 7.9 G.

  Then, during the sorting process begins: "building navigation, strengthen the system of files (sorting) and a pop lights saying"access denied"and the process hangs there.» During the editing process, I made to halfway through a test to a 4.7 G disk, and that went well spent, I burned a 4.7 G disc with some of the material.

  Anyone has any suggestions that it may be. Thanks for the reply.

  Chris

  Begin again by a right click and choose 'run as administrator '. Try again. This version fixes a number of problems.

• HP Envy 14-1200 Prod # XQ103AV: "we could not create a new partition or locate an existing one. See the Setup log file.

  System - HP Envy14 - 1200 Beats Edition Notebook PC Series - product # XQ103AV.  It came pre-installed Windows 7.

  Error message "we could not create a new partition or locate an existing one.  See the Setup log file.

  appears in the new installation of Windows 8.0.

  Installation of MS Windows 8 DVD detects the hard drive OK.

  Software mini of Partition of the tool (3rd part) detects the hard drive OK.

  Windows 8 DVD software both MiniTool detects the disk partition and its OK formatted, but the error message is displayed to prevent installation.

  Here are the steps that I tried to solve the problem, but it won't work.

  1 opportunity Microsoft Windows 8 DVD diskpart to clean HD, to partition and to format... always get the same error message.

  2 opportunity Microsoft Windows 8 DVD diskpart to clean HD and partition... always get the same error message.

  3 MiniTool Partition software used to clean the HD, partition and format... always get the same error message.

  4 MiniTool Partition software used to clean HD and partition... always get the same error message.

  5 has bought a new hard drive repeat steps 1 to 4 and I got the... its error message.

  Background

  I have upgraded to Windows 8 Windows 7 and it worked for 2 months, then I upgraded to Windows 8.1.

  After that the system is being updated and restarted, the screen turn black.  So I decided to re - install Windows 8.0.

  There is no SIM card in the laptop.

  Help, please...

  I managed to do work Ok. Use Windows 8 DVD to run Diskpart

  1 delete the partition.

  2. restart the system.

  3. allow Windows 8 DVD to perform the partition and format the HD.

• access denied to the local disc (c :))

  access denied to the local disc (c :))

  Read the article below and post back with all the relevant information. Thank you.

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  Windows Update forum is one of the three forums that doesn't have different forums for different versions of Windows (Internet Explorer and the game are the others).  With this in mind, we ask that you postat LEAST the following information.  If you don't know how to find some of the information and then post what you can and let us know that you need help to find information.

  Minimum information to validate:
  Version of Windows and Service pack level. (Windows XP Home Edition, SP3; Vista Home Premium, SP1; Windows 7 Ultimate, etc...)
  Post also if you use 32-bit or the 64 bit version of Windows.

  Update the number of the last update installed before any problem.  If you do not know the number of update, then give the date that the update has been installed.  The number of updates update failed.

  Error code updates failed or if you think an update caused a blue screen, give the blue screen error codes.

  Other information to validate:
  Measures already taken to correct the problem and the results of the measures.

  If the question is never happened before with other updates.

  A few other useful parts are:
  What program antivirus you use, if it is up-to-date, and there has never been any other installed antivirus program.
  If your version of Windows has been upgraded from a previous version or if it came with (or clean installed with) the version you are currently using.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think. Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Is it possible to define the name of the path and inside the MSI log file

  Is it possible to define the name of the path and inside the MSI log file, so that it should not be set from the command line.  This way just race the msi causes always a logfile in a specific path and the file name?

  Read the following article and see if it helps.  In my view, it is possible to use InstallShield, but I'm not sure.  It's just a little out of my League. http://www.flexerasoftware.com/webdocuments/PDF/msi_writing_to_the_log_file.pdf.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.