Two vista operating system installed, but only starts

Similar Questions

• 32-bit and 64-bit Vista operating system installed, trying to get the webcam to take photo

  I have a HP Webcam who settled in the factory on my pc laptop pavilion dv3510nr. I was able to take pictures with her when I'm on Facebook, but of course I can't understand yet how to do anything else with it at all outside of Facebook. I read something that said I had to download the latest version of Quickplay, but when I entered the information for my computer, Quickplay appears. I finally found something called YouCam and downloaded that. I downloaded the 64 bit version. I did it for the version 32 - bit still.

  I want to know if I need to keep download two sets of everything. I have 64-bit Internet Explorer available, but usually use 32-bit because not all websites have upgraded to 64 - bit yet. I'm just a little confused, I guess. I don't know when to download what version of bits. Can you help me?

  Luanne

  you don't have to download 2 sets of drivers. If you have a 64-bit operating system, then download the 64-bit drivers. 32-bit operating system you only need 32-bit drivers. Some 32-bit drivers will work for 64-bit os.

  As far the webcam goes you can go here to download the quickplay update

  Quick game

  You can go here to get you Cam

  You Cam

• on a Vista operating system so I only have XP or Win7 drivers who should I use?

  My laptop has Vista OS
  During the installation of the drivers sometimes I only have the option of XP or Win7 drivers
  Who should I install?

  Hello

  1. which drivers are you trying to install?

  2. where do you see the possibility of XP or Win7 drivers?

  3. what drivers are you trying to install?

  You cannot install windows 7 drivers, but you can install a previous version of the XP drivers in compatibility mode.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

• Re: Serial number down would work with the other Windows Vista operating system

  First of all sorry for my English.
  I have one question.

  My hard drive is broken with my recovery partition.
  If I download windows vista and install the system with my original serial number on the laptop, this will work or should I activate it after installation.

  I hope it's the same number that the front is installed on my first installation.

  Hello Marcin

  I doubt that the serial number that is placed at the bottom of the device works with another Windows Vista operating system. But it s worth a try
  You could test it I heard it's very rare cases it was possible

  In any case, if your HARD disk is damaged and it of not possible to create a recovery DVD using recovery software Toshiba disc creator, then you must contact the ASP in your country for assistance.

  If the warranty is valid the HARD drive should be replaced just for free. If you need only the recovery DVDs, then you can order it here:

  https://backupmedia.Toshiba.EU/landing.aspx

  Concerning

• I would like to install Windows XP on my computer and get rid of the Vista operating system. Can I do this? I only have 512 MB of Ram and 32-bit processor.

  Windows XP instead of Vista.

  I would like to install Windows XP on my computer and get rid of the Vista operating system.  Can I do this?  I only have 512 MB of Ram and 32-bit processor.

  Hello

  There are a few things that you would have to do to install XP instead of Vista:

  1. contact the manufacturer of your computer and see if the XP drivers are available for your computer model to make sure that XP has worked properly in this regard.

  2. If the XP Drivers are available, buy a XP disk operating system / license. Try local computer repair shops because Microsoft sells more than XP and online sale buy you pirated copies can cause. Be very careful.

  3 XP runs with 512 MB of RAM, although a little slow by today's standards.

  4. do a clean install of XP. Make sure that all your data is backed up as the hard will be cleaned of everything during the Installation of XP.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  Here is some information that you would like to learn more about improving the performance of Vista using ReadyBoost, you have only the minimum amount of RAM to run Vista:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  See you soon.

• My account is active, but Adobe PDF Export ask me to sign up again. The system worked only once on my PC, using the Vista operating system.

  My account is active, but Adobe PDF Export ask me to sign up again. The system worked only once on my PC, using the Vista operating system.

  You must connect prove you are currently subscribed.

• I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

  I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

  I have no way to uncheck the premiera. I have only two options, restore or close. With java, I opened the properties and click to remove the check mark from updates, you click on apply and then clicked on ok, but he still continues to appear you have tips on how can stop these pop ups?

  Hello

  I would like to inform you that Jucheck.exe is the process that runs automatically when the Java Update tool is activated. Jucheck.exe usually checks the Internet for the software updates available and invite you to install them to keep your updated program. If you prefer to search and download the Java updates manually whenever you want, disable Java Update automatic tool disables and removes Jucheck.exe

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• I want to continue to use my current Vista operating system, but I forgot to turn it off before changing the parts of my PC. Now, whenever I try to turn it on, it says that the license is already in use.

  Transfer of license with a twist

  So I've recently upgraded to a new system... Virtually everything has been replaced - the motherboard, RAM, graphics card, processor... Everything but my HARD drive. I want to continue to use my current Vista operating system, but I forgot to turn it off before changing the parts of my PC. Now, whenever I try to turn it on, it says that the license is already in use.

  Is there anyway for me to be able to turn it on for my new rig? Thank you.

  If you have a retail copy of Vista, you must activate by phone.  Click Start, type "slui 4" and press ENTER.

  See http://support.microsoft.com/kb/940315

  If your copy of Vista is preinstalled on your computer, you can't use it with the new motherboard and you will need to purchase a copy of the license full of Windows.  Most of the editions of Vista out of support in two months so consider Windows 7.

• Satellite A135-S4437 does not start the Vista operating system more

  Hello

  I have a Satellite A135-S4437 old laptop computer for 2 years. It is not start the Windows Vista operating system. When I press the power button, I can't see the screen "in touch with tomorrow TOSHIBA" and below in the status bar is the option press F2 for SETUP or press F12 for the boot device selection menu.

  I tried pressing both F2 and F12, and none of these options has nothing to do. They give just 'Please Wait... "and it remains right on the screen to touch.

  Thanks in advance for any help!
  PG

  Are you can access BIOS by pressing the ESC key?
  Select this check box.

  But to be honest, it sounds like a BIOS problem, and in the worst case, you will need to ask the technician to mobile to help.

  Welcome them

• I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  ===============================================
  You can resize a picture in WLPG but if you want to change the .dpi you
  need a different application.

  Information about resizing...
  Right-click on one or more selected inches... Choose... "Resize" in the menu.
  Choose a format, access a folder to save in the left click the ' resize and
  Save "button. (I suggest that you save the photos resized in a new folder
  to prevent the replacement (replacement) the originals)

  Take a look at the following link:

  Resizing Photos in Windows Live Photo Gallery
  http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

  In addition, the free software IrfanView can change dpi. Simply open a photo in IrfanView
  and go... Image / information. Enter the resolution you want in the resolution
  fields and on the left, click change. Then go to... File / save as... and save
  your photo altered with a new name.

  IrfanView
  http://www.software.com/IrfanView
  (Download plugins too)
  http://www.software.com/IrfanView-plugin

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I'm having a problem with my Windows Vista operating system. Problem started on 19 February 2011.

  I'm having a problem with my Windows Vista operating system. I have a Toshiba Satellite A135-S2376. Problem started on 19 February 2011. Computer continues to display Windows Explorer or Microsoft Windows has stopped working messages. Cannot run all programs, sharing disk cleanup, System Restore. Cannot download IE 9. Help, please! For example: tried to run MP3 Rocket he was trying to load & then a message appears at the top that States platform Java cannot run or something to that effect. Basically, I can't run any program that needs to use Microsoft Windows.

  Hello

  You can try to do a system restore before this date

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware scan

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Trying to download music from itunes on a Windows Movie Maker 6.0 file and receive an error msg stating not installed codec. Windows Vista operating system.

  Trying to download music from itunes on a Windows Movie Maker 6.0 file and receive an error msg stating not installed codec.  Windows Vista operating system.

  Trying to download music from itunes on a Windows Movie Maker 6.0 file and receive an error msg stating not installed codec.  Windows Vista operating system.

  ==============================
  The following thread explains how to convert
  the files to a different format... iTunes then
  You should be able to import them.

  Need help to convert itunes to Windows Media
  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f496ae8e-d3f9-4336-BB3C-8070421c8eff
  (Scroll to the bottom to detach the message by: musiclover101)

  Or... use the following freeware to convert your
  already downloaded files to the .wma format.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your files in iTunes on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I have xp as my operating system. But ineed as my os vista please help me in doing so, that is that I need a CD or can I download for free im of the India

  I have xp as my operating system. But ineed as my os vista please help me in doing so, that is that I need a CD or can I download for free im of the India

  There is no Vista free download legal available.

  Buy online since: newegg, amazon, etc.
  Or try your local computer store to buy Vista.

  See you soon. Mick Murphy - Microsoft partner

• PDF can be installed on a computer with a Vista operating system?

  PDF can be installed on a computer with a Vista operating system?

  Please check:

  • https://www.Adobe.com/support/products/PDFs/adobe_products_and_windows_vista.PDF
  • Run Acrobat on Windows Vista

  Concerning

  Stéphane

• In the creative cloud applications can be installed on a Windows Vista operating system?

  In the creative cloud applications can be installed on a Windows Vista operating system?

  You can see the tech specs for any product you are thinking about installing via the page following the link to the software Creative Cloud:

  http://www.Adobe.com/products/creativecloud/tech-specs.html#requirements