two your create a graph online

Similar Questions

• Unique EO, two your, CREATE problem

  JDeveloper 12.1.3

  Scenario: EO unique based on a table. For example, VehiclesEO. Let's say there is a CarsFlag attribute and if CarsFlag = 1 then the record describes a car, if CarsFlag = 2, the record describes trucks etc.

  Let's say I have your two 2 based on the EO above.

  CarsVO. In the WHERE clause of the VO, I put the flag to 1

  TrucksVO in the WHERE clause of the VO, I put the 2 flag

  Perhaps also relevant, both your have attribute DateTimeAdded which is a timestamp, and your are sorted by DateTimeAdded DESCenging. See below why I mention this.

  On a page that I have two tables with New/change/delete buttons that I use for the CRUD that is done is dialog popup.

  So far so good, the page runs, a table shows cars, the second table shows trucks

  Problem:

  -Click new and create new record on VO. Click OK (popup dialogue) that validates the record and closes the pop-up window.

  -The folder newly created the specific vo presents in the 1st rank as the most recent which is fine

  -HOWEVER, this same record shows in the OTHER table as the last entry! It's strange, because if the CarsVO folder is created it is impossible in the table TrucksVO due to the indicator of WHERE clause. No question.

  -If I leave the page or restart the application, then fine (this is until I try to CREATE one more time)

  Ideas?

  is there any scenario "behind the curtain" where this particular code alteration would create other problems?

  As far as I KNOW, no.

  BTW, it's probably more 'natural' first call super.create (); and then this.setAssociationConsistent (false);

  Dario

• Cannot access records two newly created on the USB.

  * Original title: Chaos Pendrive

  My USB got two shortcuts (with the files icon): "found.000" and "recycled".

  All records are now shortcuts (for cmd or anything in system32).
  I have no data (excluding files that were not in all cases).
  I can't get into folders, which is obviosly (records are now shortcuts).
  It's my size of USB as before the accident.
  What should do?

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that you can not access both files newly created in your USB key.

  This issue could be due to a spyware infection. I propose to run online scan and check if it helps.

  Connect the USB stick to the USB port and scan it using the Microsoft Safety Scanner and perform the analysis complete on your computer.

  Online scanner.

  A quick way to search for viruses is to use an online, such as the Microsoft Safety Scanner scanner. The scanner is a free online service that helps you identify and remove viruses, clean your hard drive and generally to improve the performance of your computer.

  To run the Microsoft Safety Scanner:

  a. go to the page Web of the Microsoft Safety Scanner Download scan.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  b. click on Download nowand then follow the instructions on the screen.

  Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please post back with the State of the question, so that we can help you further.

• Create a graph of query 2D Array

  Hello world.

  The connection of DB Toolkit, I created a 2d with 2 columns table:

  -the first rapresenting of different temperatures

  -the second with the Date and time related

  the current array is in the format of string because DBL format I could not properly represent Date and time

  How can I can create a graph where Temp = y and DateTime = x ?

  I attached you the VI and a photo with the 2d array that comes to execute the query.

  Thanks for your help!

  
  

• How to create a graph in time real LabVIEW 6.1?

  I am new to programming in LabVIEW (6.1). I wonder to create a LabVIEW interface that can operate the multimeter Keithley 6487, allowing us to apply a voltage and nth measures. With the measures that we have create a chart (V curve i) I find the XY graph, but it only allows to send all the measures at the same time (indexing) to generate the graph and not whenever we take the action so the graph build inn in real-time. I need to know how to create a chart or change the XY graph, so I can generate the i - V curve with each step we take in real time. Whenever we take the action and not once the program ends. Thanks in advance.

  You must place the graphic inside the loop and the use of shift registers to accumulate the X and Y in the form of tables. I do not have 6.1 right now in the process of execution, but it would basically look like this:

  

  Note that the above is for demonstration (the code is in fact a greedy loop). You can consider putting Scripture on file inside the loop. In this way, if the program crashes, you will not lose your data.

  WARNING: Using table build as indicated above will result in continued growth of memory. If your program is running for a long time, this can become a problem. One thing you may need to watch must have a limit on the size of the array. I know there is an example of "Table of XY" comes with LabVIEW, and I'm sure that this is with 6.1. You should take a look at this example, which implements a fixed buffer for the data in the chart size. You should be able to use the VI "graphic buffer XY"directly in your code. "

• create/remove graph sliders programattically

  Hello

  In LabVIEW 2011, we are working with a single-trace graph that updates periodically; We need to draw programmatically the sliders during the race, as new data become available.  Initially, we just create a static array of cursors, made all invisible, then moved and makes them visible as they have become relevant; However, now we want to make the dynamic list.  It is best done by reading the list of cursor, manipulate the table according to the needs, and then writing it in the chart, or is there better ways?  The process is to identify peaks and valleys in a plot in ever-changing data.  I find it interesting that the user can create new cursors manually, but there is no property to allow the same programmatically; Ditto for remove them; the user created cursors use the default attributes that are not adapted to our needs.

  I am looking for the solution less long-term, and rewrite the entire table seems to be unnecessary performance degradation.

  Maybe we should create new sliders in blocks to reduce the number of updates to list of cursor?  I'd like to think the worst case is about 60 sliders, but as the peak detect algorithm is automatic, an unusual data signal could cause several hundred.  The graph will survive even this?  All the data will be, worst case, be something like 15000 data points.  Experiences/pointers/warnings will be appreciated.

  Thank you

  Blair

  Blair Smith wrote:

  [...] It is best done by reading the list of cursor, manipulate the table according to the needs, and then writing it in the chart, or is there better ways?

  I don't see any method to add a slider, so manipulate the table is the way to go.  You could save the time it takes for the reading list reading it only once, at the beginning and adding to what your field evolves.  You can limit updates to occur no faster that the operator can enjoy.  If your data adds dozens of peaks in a fraction of a second, you could get away with adding them at once per second or more.

• Preview feature (is it possible to download the document to your personal server?) online

  I am interested to learn more about the new online publication of indesign feature. I would like to know if it is possible to download a document on your own server instead of the adobe Server? I would like that document I created for my website under the URL instead of the URL of the adobe http://indd.adobe.com/view...

  A more recent version to publish online will come with the next version of InDesign, due before the end of the year. It will include the possibility to use an embed code to link the content on Adobe servers. You will not be able to accommodate the document on your own server.

• My folder is now public after using "create a PDF Online?

  I just tried to use Adobe Reader X and wanted to create a PDF from a .jpg file. I went to file > create PDF Online to do so. My question is if other people can access them as well, or if it is private?

  Hey shawnp46076630,

  The files that you create will be saved in your online account. These are not public, but you can share and control files from anywhere via a web browser.

  Kind regards

  Ana Maria

• What happened to create a PDF Online? The products changed?

  I need to create a PDF file via my online subscription. I have connected but I can't find a link to my online service.

  Hi paulnordgren,

  Please let me know what link you want to use. There is change in the interface.

  You can visit this link and in the drop-down list, choose your service, then sign up with Adobe Id and password. : Acrobat Pro, PDF package, PDF Export & more | Documents Acrobat solutions

  

  Please let me know if that helps.

  Kind regards

  Ajlan Huda.

• Tracing a position using two voltage on a graph signals in LabVIEW

  I am a new user with LabVIEW and I got 4 analog signals with a detector sensitive Position of duo-lateral (PSD) and then I made math on them and then reduce to two (coordinates X and Y). PSD will give the position of the signal in terms of tensions. If the position on the PSD is in the Center then X and there will be zero and the position of the signal on the signal changes the X and Y voltages are changing, so we get the new position. Now I want to do is draw the co-producers of the signal on the DSP on a graph in LabVIEW simultaneously. I'm simultaneously sampling at the speed of 1 kHz.

  Can someone help me with this application?

  Thank you

  
  

• Creating a graph of intensity from the discrete values

  I have 4 discrete results. I want to display this information in a graph of intensity. I want each of these discrete values to have a specific color on the intensity. If possible the value 4: a = 1, b = 2, c = 3, d = 4. If I spend 2 x 2 table 1,2,3,4 in the graph of the intensity, I want a red, b blue, c green, d be and yellow. How can I specify that on the chart? Is there a good example?

  Thank you!

  In this thread, I give an example where you set Z scale by using a property node.  In your case switch off interpolation of Z scale as well.

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=437481#M437481

• Two players created when connecting player Sansa Clip +.

  Hi, I plugged the drive and there are 2 drives have been created:

  SANSA CLIPP (i), can I use to copy music on the drive, and

  Disk removable (j), which is unusable.

  No idea why?

  Windows XP SP3.

  your clip + is connected in MSC mode. the additional removable disk is the slot expandable memory on the side. If you have a micro SD card into the slot, you will be able to access the additional disk.

• How to remove DB sync two diagrams created with Goldengate carefully

  I have synced successfully two database schemas using goldengate (Uni-directional). Then I stopped all extracts and replicates, deleted and not the main excerpt from database. But now I can't synchronize this same patterns using an other excerpts and a replicate. Replicat abunded after a few seconds of starting. Surely, I missed something by removing replicat and extracts. What will be the right way to remove them? 

  I had to look at the extaract and the files remote trail created earlier. I had used the same location to store their old files were the reason. I removed the of dirdat source directory and target. Now it's ok.

• I have a 10-page newsletter I want to publish online. Once I have create a file online, where this file is saved? In case I need to open 6 months on the road.

  Can someone answer this question for me?

  Your file is hosted on Adobe servers, but you should save your 10 page InDesign locally document somewhere to change later. You don't alter the online edition, instead, you change the original User.ID file and reupload to update.

• How to create a survey online or for new customers?

  Hello

  I want to create a survey for my new graphical clients. I have a few business questions to new clients and need written answers. I want to stop sending a pdf form, is not well designed for an excellent online form.

  In fact, I know how to how I will present and send the page, but not for a tip: how to create an editable multiline text field online by someone Muse?

  I tried to use this type of text box of a contact form, but it is not effective.

  I tried a wuffoo embed widget, but I don't want to use an external service (like getosmosis.com, or something)

  I have well on the browser in editing, but I don't know if it's a good idea to do this, or really effective.

  I want to build a page scrolling with anchor points and a vertical menu sticking to the 10 chapters of questions and a "send" button at the end to receive the form in my Inbox mailbox, exactly like a message in a contact zone.

  You have an idea? Advice?

  Thanks for that, guys.

  Mikael.

  Forms are forms and editing in the browser has nothing to do with it. I'm afraid that you really need to use other services or sign up to a British Colombia account Pro, if it is really so important to you.

  Mylenium