HP 2000: Hp 2000 - 2d10nr does not start

Similar Questions

• 2000-2D02TU HP: HP 2000-2D02TU Power LED power switch but the laptop does not start.

  Someone help me.

  HP 2000-2D02TU Power LED power switch but the laptop does not start.

  What I'm doing.

  Please help me

  Model No. - HP 2000-2D02TU

  Hello @Alok_Bhai,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the laptop won't start does not and wanted to help you!

  You indicate that the lights are flashing, but the laptop does not start?  If this is the case, try to review the following document and let me know how it goes:

  Computer does not start and emits a LED or beep Code

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Keyboard Microsoft Wireless 1000 and a Microsoft wireless optical mouse 2000 - my computer does not start.

  Hello.

  I have Microsoft Wireless 1000 keyboard and an optical mouse wireless Microsoft 2000, they worked fine on my old computer with XP.

  Now, I bought an Acer Predator G3620 with Windows 7 and my computer does not start. He stops and beeps when it says "Press DEL to enter setup", this continues to the repeat. When I use the wired Acer keyboard and mouse the computer starts normally.

  When I inserted the original CD with the drivers, it gave an error of compatibility with this version of windows. So I downloaded the drivers and everything seemed fine. But when I start the computer (or reboot) I have to disconnect the transmitter/receiver or the computer stops and beeps.

  Once the computer is turned on, I can reconnect the transceiver, and it works fine.

  Find it me hard to believe that it has to bee like that.

  I have to buy a new keyboard and mouse?

  Brgs,

  Robert

  Go into the BIOS of the ACER and set it for legacy USB, USB mouse, USB keyboard, or along those lines...

  Then, go here for the drivers...

  http://www.Microsoft.com/hardware/en-us/downloads

• upgrade fails 3A 15 vom: unpacking OK but the installation does not start

  Current version is on my Windows 2000 SP3 my Firefox 3.0.19. I can't update anymore!
  There are two phenomena:
  1.) when you use the function "search for updates", it offers a maximum version 3.0.19 upgrade.
  2.) when I update manually (for version 15), it unpacks the files correctly but does NOT start the installation program - without ANY error message.

  And I can't find any archive version here to try a progressive example version 5 or 10 upgrade, unfortunately. Are there not all archives?... Or what problem you think, I have?...

  Thank you for responding.

  15.0.1 Firefox will not install on Windows 2000. Your best bet is to upgrade to Windows XP or later version, or install Firefox 12 of ftp://ftp.mozilla.org/pub/firefox/releases/12.0/.

  For more information, see Firefox no longer works with Windows 2000 .

  In addition, update your windows, you are missing a service pack

• Satellite P10 554 does not start

  Hello!

  First of all, sorry for my bad English

  The problem:

  I installed windows XP Professional on my Satellite P10 554.
  I bought it on ebay and the seller said that everything goes well with this laptop and the tests when I turn on the laptop saying the same thing.

  But after installing XP, it does not start!
  It is the boot screen with the blue line that moves. This line moves a little, that it stop and that all the time and nothing happens!
  I tried the same thing with XP home, and windows 2000, but it has the same problem!
  I really need this phone. I hope someone can help me!

  Christian

  > I bought it on eBay and the seller said that if everything goes well with this laptop and the tests when I turn on the laptop saying the same thing.

  You said that the test says it of ok. How did you test it?

  > It's the boot screen with the blue line that moves.

  You mean the OS bar which moves while loads the OS. Am I wrong?
  Hmm, if you have tested the laptop with Win XP and W2K then I guess that you have installed the two OS on this laptop and it was possible to install it?
  Am I wrong?

  Sorry to say but if the laptop is unable to load the operating system the hardware would be a malfunction.
  I think you should first check the memory modules, then the HARD drive. Maybe one of the modules does not work correctly or some bad sectors can cause the problem.

• Compaq 56z-200: does not start

  In my view, an overheating problem.   He always ran hot, even when it is new and clean.   Wife and children insisted on holding their towers to use and also blocked vents a problem.       Symptoms: 1) the final a few times it would start the a/c with an error message (battery failure) (this only refers to the main battery only or the BIOS battery?)     (2) after 10 or 15 minutes of use a gray screen blocking.   Let it cool would allow it to restart.     -How distinguish the problem I did one last backup with starting on a USB key.    During other troubleshooting with impulse of air to cool the screen turned gray and I was to turn it off, the screen quickly started to turn red from bottom to top, and then it turns off.  -Since then, it does not start, even using the USB key.   It lights up, the fan seems to work and it gives an indication it is powered (a/c), but none of the keys work, and the caps lock light flashes 1 x per second continuously.   QUESTION: I've already replaced the computer.     Is a throw away the old, or something simple and inexpensive could record for games or surfing the net safely?    Y at - it parts worth saving, HDD, RAM etc?    My computer, a Comqaq 2000 seems looks the same, except for the name.

  Hi @Jimsquest,

  If you've done every step of the document and still have questions, please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• Windows Vista does not start at startup

  I have a Dell Inspiron 1525. My wife uses mainly the laptop for access online, certain professional activities (Word documents, spreadsheets) - nothing major.

  Today, after starting the Dell system, the laptop would not boot correctly. It would have wrapped after the Windows flag and never completely boot. What I have done so far to try (unsuccessfully) the question of setting:

  (1) launch Startup Repair (recommended) - no resolution

  (2) Ran Dell Diagnostics - received error code: 2000-0333

  (2) selectable repair your computer from the Advanced Boot Options and attempted a system restore - it has failed because of an i/o device error (0x8007045D)

  Not sure which is precisely the problem. Please help to troubleshoot and resolve this problem.

  Thank you

  D

  Hello

  Follow these steps using the Dell diagnostic process, especially by pressing F12 at startup.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266787

  "The computer does not start in Microsoft Windows Vista"

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_343119&isLegacy=true

  If Dell information does not resolve the problem, you may need to reinstall the operating system.

  See you soon.

• Inspiron 620-7750 Radeon with 450W power supply installed does not start

  Hello!

  I have looked EVERYWHERE online and on the forum and have seen several posts on this topic and still not found a solution that works.  I have a Dell Inspiron 620

  • I5Intel Processor2nd Gen Core i5-2310 / 2.9 GHz
  • Memory8 GB / 8 GB (max)
  • Windows 7 Home Premium 64 - bit Edition operating mode
  • Optical DriveDVD±RW
  • Graphics technology ProcesseurIntel HD Graphics 2000 dynamic video memory 5.0
  • Integrated graphics controller

  Recently, I buy a Powercolor Radeon 7750 graphics card I have installed the drivers, uninstalled the current Intel Graphics driver from Device Manager and then install the new card.  I of course unplugged the PSU got rid of and left in power has failed to myself and plugged into the PCI-E.  After I tired to turn on but it does not start.  Fans begin to turn, including on the graphics card, but nothing comes up on the monitor and it won't start.  When I unplugged the 7750 card it starts very well?

  At first I thought that it was not powered ridiculously horrible 300w PSU they put so that I have upgraded to an a 450w.  Everything works with the new power supply installed without the card, but as soon as I plug the new map, he continues to not start as before installing the card.  I have searched and tried things for 2 days now and CAN NOT find a solution.  I know that the 620 does not access the menu of the BIOS under settings in advance who does not help (don't know why Dell would never think it was a good idea!) so I can't change anything in there.

  Please, any help would be fantastic!

  Thanks in advance!

  The card is a bad card.  There should be ZERO problems with the supply of the stock 305 w and a 7750.

• Dell PowerEdge 2850 does not start on a CD of ESXi 3.5

  Hello...

  I have a Dell PowerEdge 2850, who does not start on a CD of VMware ESXi 3.5.  The server works very well with Windows 2000 server.  My first thought to solve this problem was the BIOS.  This is all what I've updated in what concerns the firmware on the box today.

  BIOS - A07

  Perc4e/Di - 5B2D, A19

  BMC Firmware - 1.83, A10

  Here are the latest versions of firmware available from Dell on this box.  The machine starts to start the machine.  But all I see is the first line of text of the CD which is the following:

  ISOLinux 3.63 2008-04-10 Copyright (C) 1994-2008 h. Peter Anvin

  My next thought was that there was something wrong with the ISO image that I downloaded.  I tested it on another machine; has worked like a champ.  Now, I read on a few different posts within the VMware communities that some people have had luck with this question and others did not.

  The inventory number of Dell on the machine is 6HDGS81

  Any advice would be greatly appreciated.

  Some of the Dell CD-ROM may be little flighty. I had hard time to install a CD earlier which worked perfectly well on another machine. I made another copy of the disc, this time burning the CD at a 4 x speed. The installation went perfectly fine afterwards.

• Siri does not start under macOS Sierra

  I've recently updated to macOS Sierra (public version) and everything seems fine, except for allowing to Siri. I tried to enable the system preferences as well as execution of the Siri application in the application. I even tried to 'facilitation' by selecting in the menu bar.

  In any case it does not start. Upon activation in system preferences, I get "There was an error in the preferences of Siri." and it takes back me to the main view of system preferences.

  Y at - he of the log files that I should be reviewed to determine the cause of this problem?

  Thank you

  Steve

  Same thing here on a MacBook Pro (13 inch, late 2011)

• Black MacBook does not start

  I have a 10 year old black Macbook, which does not start when a battery is installed.  If it is connected without battery installed, it lights up, but if there is a battery in it, even if it is plugged in, it will get the startup sound and the screen of the Apple gray, then turn off.  I got a new battery and charge it where the charger turned green, but the results are the same.

  Any suggestions?

  It is difficult to say what is happening with this machine, since the time and wear are considerations. I don't know what version of the operating system that you use, but there is a sequence of things you should do - in order of severity.

  http://www.howtogeek.com/217158/what-to-do-when-your-Mac-won ' t-start-up.

• iPhone hot 5s fees and does not start

  phone is connected to the load.  After a while I checked it and it was very hot.  I unplugged it and now it does not start.

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data.

  More troubleshooting can be found in this article:

  If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

• iMac does not start after the last security update

  Hello

  After the last update my iMac (late 2009, El Capitan) does not start.

  The iMac starts he accepts my user and password entry, the loading bar stops at 80% and then nothing happens... after I turn off the iMac. Repeating this procedure change nothing.

  Does anyone have any advice for me?

  THX

  INTELLECTUAL PROPERTY

  a solution that helped me:

  Re: security update causes damaged Apps

• iMac does not start after 10.11.6

  Since the 10.11.6 patch my IMac does not start with my hub plugged.

  Everyone

  I assume you mean a USB hub? What does do when it's plugged in? It starts successfully when the hub is not plugged? If so, I would say that something is wrong with the hub or there is a problem with the port it is plugged or something plugged into the hub.

  Try to plug it into a different USB port on your Mac.

• MacBook Pro does not start

  I have tried several things but the laptop won't start do not. Power cable showing green light as if the laptop is fully charged. It's like the death does not start.

  Try resetting the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  You said "It's like death does not start."

  Does this mean that he shows no signs of life? Indicator light power?

  Hear the carillon?

  Hear the fans?