Type mismatch?

Dear experts,

I have an ini file and you want to read the value of a separate entry. In the script of the element is found and its value also. Apart from the script, the value is undefined.

What is going on? All ideas are welcome.

var value;
GetIniValue ("FM-biblio.ini", "04_DoingBook", value);
alert ("value read is " + value);

function GetIniValue (sIniFile, sValueName, sValue) {
// ----------------------------------------------- Read an ini item into a variable
// iniFile must end with a line containing some blanks.
// sValueName is that used in the ini-file (with the prepending #_ (e.g. "04_DoingBook")
  var thisLine, match, notFound = true; 
  var regex = {
    section: /^\s*\[\s*([^\]]*)\s*\]\s*$/,
    param: /^\s*([\w\.\-\_]+)\s*=\s*(.*?)\s*$/,
    comment: /^\s*;.*$/ } ;
  settingsFile = new File($.fileName.replace (/[^\\\/]+$/i , sIniFile)); // method Ric Quatro
  settingsFile.open("r");
  while(true) { 
    thisLine = settingsFile.readln();                  
    if (settingsFile.eof) {                       // at end of the file we are done
      break; 
    }
    if (thisLine === null || thisLine === "") {   // skip blank lines
      continue;
    }
    if (regex.comment.test(thisLine))  {          // skip comment lines
      continue;
    } 
    if (regex.section.test(thisLine))  {          // ignore section lines
      continue;
    }
    match = thisLine.match(regex.param);          // ignore undefined contents

    if (match[1] == sValueName) {
      sValue = match[2];
alert ("GetIniValue: sValueName  " + sValueName + ", sValue read = " + sValue); 
      notFound = false;
      break;                                      // no need to continue while loop
    }
  }
  if (notFound) {
    alert ("GetIniValue program error - sValueName " + sValueName + " not found in sIniFile " + sIniFile);
    stop;
  }
  settingsFile.close();
} // --- end GetIniValue

34 reports alert line "GetIniValue: 04_DoingBook, sValue read sValueName = no", but outside of the value is undefined.

The ini file contains these lines:

...
03_ListItems      = yes
04_DoingBook      = no
05_Template       = FM-biblio-tpl.fm
...

Hi Klaus,

While (true) {}

$thisline = settingsFile.readln ();

If (settingsFile.eof) {/ / at the end of the file we are done}

break;

}

That way you can never access the last line:

If you have read the last line-> you have reached eof. (EOF is true)

If you can't access the data.

Then you can try this:

while(!settingsFile.eof)
    {
    // your commands ........
    }

Tags: Adobe FrameMaker

Similar Questions

run the vba without compiling vi gets error 13 type mismatch

Hello

I am trying to use VBA to access Agilent 33250 vi driver code. I followed the examples in the forums, but I'm not sure why I get "Run Time error 13' type mismatch.

Void LabVIEW()
Protected String filepath
Dim lvapp As Application
Dim vi VirtualInstrument
Dim ParamNames (0-1) As String
Dim ParamVal (0-1) have varying

Set lvapp = CreateObject ("LabVIEW.Application") ' create the connection to labview
FilePath = "C:\Program NIUninstaller Instruments\LabVIEW 2013\instr.lib\Agilent Output.vi Series\Public\Action-Status\Enable 33XXX.
VI the value is lvapp. GetVIReference (filepath) ' load vi

ParamNames (0) = "VISA resource name.
ParamNames (1) = "activate the output (T: Enable).

ParamVal (0) = "GPIB0::10:INSTR".
ParamVal (1) = True

VI. FPWinOpen = True
VI. call ParamNames, ParamVal

lvapp. Quit smoking

End Sub

Any suggestions?

Thank you

I never called LabVIEW in VBA. But I do not know LabVIEW and I do not know VBA.

I see one of the two possibilities

1. the string for the name of the resource does not work for the VISA resource setting or the Enable parameter do not like the real.

2. are there that many order entry? Do you need to assign a parameter and a value for each control on the Agilent VI? I do not know. Perhaps the VI guess just the default just as if you put a wire into a Subvi.

# 1. Break the smaller code. First of all, just to make the VISA resource and comment the Enable parameter and value. Then try again with the resource VISA and guided value and assign the parameter enable (0) and value (0).

See if that one or if these two still triggers the error.

Document Type mismatch

OfficeJet 6500 has (E710a):

I try to print an envelope #10. Get 'Type Mismatch paper' every time.

I measured the envelope, it is 4 1/8 "x 9 1/2".

I tried several different programs, I get the same error every time.

I understand the printer "scans" of the document that feeds, make sure that it corresponds to the selected paper type. Is it possible that this "scanner" thingy is out of whack?

== JJS ==

Hello jimspy,

I see that you are unable to print an envelope format #10, this "Paper mismatch" error is the case of any other format of print media? If this isn't the case, I would say that the censors are working well.

I was able to find this document that can help: a 'paper Mismatch', or 'Paper Size Mismatch"Error Message displays when printing in Microsoft Word. Running HP and Scan Dr. impression may also be useful.

Let me know if these suggestions help you.

FoxPro 9 error message. "Data type mismatch.

Hello

In front-end, when I opened a second menu there is an error message "data type mismatch. How can you fix this bug?

Kind regards
Esyrom

[Moved from comments]

Hello

Try the FoxPro Forum

http://social.msdn.Microsoft.com/forums/en-us/home?Forum=visualfoxprogeneral

Don

Type mismatch runtime error 800a00d MSVBScript

Title: MSVBScript original error

Error: Type mismatch 800a00d to TIME MSVBScript error 'Open Conn' / includes/content_left to 11 asp.line

Please respond to the * address email is removed from the privacy * I can not enter or find my main email account either. I've added files

My each of my other accts containing in the newly created hotmail and I just can't find them. Windows says contact

MS because they cannot fix. I'm a newbie... Anyway this time I guess I can ask for that much help. I have

know you people need EXACT wording error :) If I need to fix it manually with your advice, remember pls I

don't know much thing to do anything whatsoever.

Hello

1. what operating system is installed on the system?

2. when exactly you get this error message?

3. did you of recent changes to the system?

4. Since when are you facing this problem?

If you receive this error while browsing the Internet with Internet Explorer, then you can follow the steps below.

(a) click the Start button

(b) Select all programs

(c) , click on Accessories

(d) right-click on the command prompt

(e) select run as administrator

Type regsvr32 jscript.dll /u and press enter
type regsvr32 jscript.dll , press enter
type regsvr32/u vbscript.dll , and then press enter
type regsvr32 vbscript.dll , and then press enter

(f) close the command prompt and look for the question.

See also:

How to resolve script errors in Internet Explorer on Windows computers

http://support.Microsoft.com/kb/308260

If you have any problem with Hotmail, you can post the question on the link below for assistance.

http://windowslivehelp.com/product.aspx?ProductID=1

Type mismatch and VI properties in 'for more specific classes.

Dear all

I have a Subvi trying to modify the properties of certain objects on the main pane of the front, in the example I have attached to this message it works well, but when I use the same Subvi in my main application which is a little bigger and has more hierarchical levels (that's why I join this one) it comes across some errors.

Once running "to a more specific class' in the Sub - VI called ("MultpObj1N"), it gives this error that" LabVIEW: Type mismatch: object cannot be cast to the specified type.»

I have no idea what could be the reason for this. Do you have any idea what it could be?

Best regards

Afshin

Dear Darren

Suddenly, I realized that my problem just happens to group objects (no cards) and like you said the type of data were different. Because I wanted to just access the visibility as you suggested, I've changed the strict form for normal and it worked.

Thank you very much for your advice!

BR

Afshin

kb2419632 Type Mismatch DAE

What windows installation updated kb2419632, on my Windows XP SP3 machine. The update works fine, but after that I restarted, my projects VB6 using DAE fail to connect to the database, reports a Type mismatch.

I deleted the update and everything is going well for the moment, but I would get this update installed and working with DAE.

Any help would be appeciated.

Hello

Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public to deveolper on the Microsoft Developer Network.

Here is the link:
http://social.msdn.Microsoft.com/forums/en-us/vbgeneral/threads

I hope this helps.

Thank you, and in what concerns:
Shekhar S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Dynamic XQuery type mismatch

I have the following. How to avoid the dynamic type mismatch?

< ResGuests >

< ResGuest >

profile of <>

< ProfileInfo >

< Type UniqueID = "21" ID = "3558" / >

< profile >

< TPA_Extensions >

< TPA_Extension >

< DRI_INFO MemberLevel = GuestType "s/o" = "GST" / > "

< / TPA_Extension >

< / TPA_Extensions >

< customer >

< PersonName >

< name > Ws < / name >

D. JAMES < GivenName > < / GivenName >

< / PersonName >

< / customer >

< / profile >

< / ProfileInfo >

< ProfileInfo >

< Type UniqueID = "21" ID = "3568" / >

< profile >

< TPA_Extensions >

< TPA_Extension >

< DRI_INFO MemberLevel = GuestType "s/o" = "Assistant Director General" / > "

< / TPA_Extension >

< / TPA_Extensions >

< customer >

< PersonName >

< name > M < / name >

< GivenName > GUY < / GivenName >

< / PersonName >

< / customer >

< / profile >

< / ProfileInfo >

< / profile >

< / ResGuest >

< / ResGuests >

SELECT lengthofstay

boarding

resvtype

devices

membertype

IN n_lengthofstay

n_amount_to_charge

v_resvtype

n_num_devices

v_member_type

FROM XMLTABLE)

xmlnamespaces (DEFAULT 'http://www.opentravel.org/OTA/2003/05'), ' / OTA_ResRetrieveRS'

PASSAGE mxml

COLUMNS lengthofstay VARCHAR2 (2000)

Path "ReservationsList/HotelReservation/Services/Service/TPA_Extensions/TPA_Extension/WiFiFees/@LengthOfStay".

TOLL number

Path "ReservationsList/HotelReservation/Services/Service/TPA_Extensions/TPA_Extension/WiFiFees/@AmountBeforeTax".

, resvtype VARCHAR2 (2000)

Path "ReservationsList/HotelReservation/RoomStays/RoomStay/RoomRates/RoomRate/@BookingCode".

Number of devices

Path "ReservationsList/HotelReservation/Services/Service/TPA_Extensions/TPA_Extension/WiFiFees/@NumberConnections".

, membertype VARCHAR2 (2000)

Path "ReservationsList/HotelReservation/ResGuests/ResGuest/Profiles/ProfileInfo/Profile/TPA_Extensions/TPA_Extension/DRI_INFO/@MemberLevel");

I would be able to extract the data in a given table?

This is not really to the point.

First, you must decide how to deal with the various nodes of type of repetition, we could meet in the XML file.

If you want extract as a single flat tabular structure or rather as separate entity sets?

If flattening is OK, then something like this will not work on your current sample XML:

DECLARE
    x_xml          CLOB
        := '

   
   
      
   
   
      
         
         
            
               
                  
                     
                  
               
            
         
         
            
               
                  
                     
                     
                        
                           
                              
                           
                        
                        
                           
                              Winters
                              JAMES D.
                           
                        
                     
                  
                  
                     
                     
                        
                           
                              
                           
                        
                        
                           
                              M
                              GUY
                           
                        
                     
                  
               
            
         
         
            
               
               
                  
                     
                        
                     
                  
               
               
            
         
      
   
';
    mxml           XMLTYPE;

    TYPE data_rec IS RECORD
    (
        lengthofstay   NUMBER
       ,chargeable     NUMBER
       ,resvtype       VARCHAR2 (2000)
       ,devices        NUMBER
       ,membertype     VARCHAR2 (2000)
       ,guesttype      VARCHAR2 (2000)
    );

    TYPE results IS TABLE OF data_rec;

    a_results      results;

BEGIN
    mxml        := xmltype (x_xml);

    SELECT x1.lengthofstay
         , x1.chargeable
         , x1.resvtype
         , x1.devices
         , x2.membertype
         , x2.guesttype
    BULK COLLECT INTO a_results
    FROM XMLTABLE (
           XMLNamespaces (DEFAULT 'http://www.opentravel.org/OTA/2003/05')
         , '/OTA_ResRetrieveRS/ReservationsList/HotelReservation'
           PASSING mxml
           COLUMNS lengthofstay VARCHAR2(2000)  PATH 'Services/Service/TPA_Extensions/TPA_Extension/WiFiFees/@LengthOfStay'
                 , chargeable   NUMBER          PATH 'Services/Service/TPA_Extensions/TPA_Extension/WiFiFees/@AmountBeforeTax'
                 , resvtype     VARCHAR2(2000)  PATH 'RoomStays/RoomStay/RoomRates/RoomRate/@BookingCode'
                 , devices      NUMBER          PATH 'Services/Service/TPA_Extensions/TPA_Extension/WiFiFees/@NumberConnections'
                 , profiles     XMLType         PATH 'ResGuests/ResGuest/Profiles/ProfileInfo'
         ) x1
       , XMLTABLE (
           XMLNamespaces (DEFAULT 'http://www.opentravel.org/OTA/2003/05')
         , '/ProfileInfo/Profile/TPA_Extensions/TPA_Extension/DRI_INFO'
           PASSING x1.profiles
           COLUMNS memberType  VARCHAR2(2000)   PATH '@MemberLevel'
                 , guestType   VARCHAR2(2000)   PATH '@GuestType'
         ) x2 ;

    for i in 1 .. a_results.count loop
      DBMS_OUTPUT.put_line (   a_results(i).lengthofstay
                            || ' -->'
                            || a_results(i).chargeable
                            || ' -->'
                            || a_results(i).resvtype
                            || ' -->'
                            || a_results(i).devices
                            || ' -->'
                            || a_results(i).membertype
                            || ' -->'
                            || a_results(i).guesttype
                            );
    end loop;
END;
/

output:

5--> 0--> REN--> 4--> N / A--> GST

5--> 0--> REN--> 4--> N / A--> ADG

but as said, don't forget that it will fail as soon as there is more than one Service, ideal or RoomRate node.

ORA-19279: dynamic type mismatch XQuery

For the XML below, the XMLTABLE() is a failure. Please notify.
< EMPTABLE >
< EMPLOYEE ENAME = 'Scott' >
< > 7844 EMPNO < / EMPNO >
Manager < JOB > < / JOB >
< SAL > 100000 < / SAL >
< / EMPLOYEE >
< EMPLOYEE ENAME = 'King' >
< EMPNO > 100 < / EMPNO >
President < JOB > < / JOB >
< SAL > 200000 < / SAL >
< / EMPLOYEE >
< / EMPTABLE >
SQL > SELECT inv_id, a.EMPName, a.EMPNO, a.Job, a.Sal
2 FROM invoicexml_col,
3 XMLTABLE ('/ EMPTABLE')
4 in PASSING invoicexml_col.inv_doc
5 COLUMNS
6 EMPName varchar2 (10) PATH ' / EMPTABLE/EMPLOYEE/ENAME,
7 EMPNO varchar2 (20) PATH ' / EMPTABLE/EMPLOYEE/EMPNO. "
8 USE varchar2 (10) PATH ' / EMPTABLE/EMPLOYEE/JOB. "
9 SAL varchar2 (10) PATH ' / EMPTABLE/EMPLOYEE/SAL.
(10) a;
SELECT inv_id, a.EMPName, a.EMPNO, a.Job, a.Sal
*
ERROR on line 1:
ORA-19279: XQuery dynamic type mismatch: expected - singleton sequence had
sequence of several element

For the XML below, the XMLTABLE() is a failure. Please notify.

My advice is: read the documentation to understand works XMLTable:

http://docs.Oracle.com/database/121/ADXDB/xdb_xquery.htm#ADXDB5097

You will also need to read a few tutorials XPath/XQuery generalist.

The error comes because you try to project "stored" in a single column data because the main manifestation of XQuery is wrong.

The main manifestation of XQuery (noted "XQuery_string" in the doc) is there to define the line template. These data 'line' are then cut into separate relational columns according to what is specified in the clause of COLUMNS:
```
SQL> SELECT a.*
  2  FROM invoicexml_col
  3     , XMLTABLE('/EMPTABLE/EMPLOYEE'
  4       PASSING invoicexml_col.inv_doc
  5       COLUMNS
  6          EMPName varchar2(10) PATH '@ENAME'
  7       ,  EMPNO   varchar2(20) PATH 'EMPNO'
  8       ,  JOB     varchar2(10) PATH 'JOB'
  9       ,  SAL     number       PATH 'SAL'
 10       ) a;

EMPNAME    EMPNO                JOB               SAL
---------- -------------------- ---------- ----------
Scott      7844                 Manager        100000
King       100                  President      200000
```

ORA-19279: XPTY0004 - dynamic XQuery type mismatch: expected - singleton sequence got several sequence element

Hello
Can you please help me by questioning from the following XML code.
under query works for the 1 iteration. but for several games I get following error.
ORA-19279: XPTY0004 - dynamic XQuery type mismatch: expected - singleton sequence got several sequence element
19279 00000 - "dynamic XQuery type mismatch: expected - singleton sequence got several sequence element.
* Cause: The sequence of XQuery passed was more than one element.
* Action: Fix the XQuery expression to return a single element of the sequence.
Help, please
Select X.*
ABC evt
, XMLTABLE (XMLNAMESPACES ('urn:swift:xsd:mtmsg.2011' AS NS2, DEFAULT 'urn:swift:xsd:fin.970.2011'),
"$msg_xml" by PASSING EVT.col1 as 'msg_xml '.
COLUMNS
Path Varchar (40) F61ValueDate "/ F61/ValueDate [1]."
Path of DebitCreditMark Varchar (40) "/ / Document/MT970/F61a/F61/DebitCreditMark [1]."
Amount Varchar (40) path ' / / Document/MT970/F61a/F61/amount [1]. "
Path of TransactionType Varchar (40) "/ / Document/MT970/F61a/F61/TransactionType [1]."
Path of IdentificationCode Varchar (40) "/ / Document/MT970/F61a/F61/IdentificationCode [1]."
Path of ReferenceForTheAccountOwner Varchar (40) "/ / Document/MT970/F61a/F61/ReferenceForTheAccountOwner [1]."
Path of SupplementaryDetails Varchar (40) "/ / Document/MT970/F61a/F61/SupplementaryDetails [1].
) X
where EVT.col2 = 2
< FinMessage xmlns = "urn:swift:xsd:mtmsg.2011" xmlns:FinMessage ="urn:swift:xsd:mtmsg.2011" > "
< Block1 >
< ApplicationIdentifier > F < / ApplicationIdentifier >
< ServiceIdentifier > 01 < / ServiceIdentifier >
< LogicalTerminalAddress > IRVTDEFXAXXX < / LogicalTerminalAddress >
< open > 5252 < / open >
< SequenceNumber > 699163 < / SequenceNumber >
< / Block1 >
< Block2 >
< OutputIdentifier > O < / OutputIdentifier >
< > 970 MessageType < / MessageType >
< > 1633 InputTime < / InputTime >
< MessageInputReference >
< date > 131101 < / Date >
< LTIdentifier > EBASBEBBQ < / LTIdentifier >
< BranchCode > XXX < / BranchCode >
< open > 1113 < / open >
< n > 070016 < / ISN >
< / MessageInputReference >
< date > 131101 < / Date >
< time > 1634 < / Time >
< MessagePriority > N < / MessagePriority >
< / Block2 >
< Block3 >
ENS0000857017566 < F108 > < / F108 >
< / Block3 >
< canton4 >
< xmlns = "urn:swift:xsd:fin.970.2011 document" xmlns:Document ="urn:swift:xsd:fin.970.2011" > "
< MT970 >
< F20a >
ENS17566/END of < F20 > < / F20 >
< / F20a >
< F25a >
< F25 > IRVTDEFX/EUR/131101/N < / F25 >
< / F25a >
< F28a >
< F28C >
< StatementNumber > 215 < / StatementNumber >
< SequenceNumber > 16 < / SequenceNumber >
< / F28C >
< / F28a >
< F60a >
< F60M >
< DCMark > D < / DCMark >
< date > 131101 < / Date >
< currency > EUR < / currency >
< amount > 2686836,28 < / amount >
< / F60M >
< / F60a >
< F61a >
< F61 >
< valueDate > 131101 < / ValueDate >
< DebitCreditMark > D < / DebitCreditMark >
< amount > 40248, < / amount >
< TransactionType > S < / TransactionType >
< IdentificationCode > 103 < / IdentificationCode >
< ReferenceForTheAccountOwner > FX5445414 < / ReferenceForTheAccountOwner >
< SupplementaryDetails > KREDBEBBXXXIRVTDEFXXXXN011031 < / SupplementaryDetails >
< / F61 >
< / F61a >
< F61a >
< F61 >
< valueDate > 131101 < / ValueDate >
< DebitCreditMark > D < / DebitCreditMark >
< amount > 41605, < / amount >
< TransactionType > S < / TransactionType >
< IdentificationCode > 103 < / IdentificationCode >
< ReferenceForTheAccountOwner > FX5443846 < / ReferenceForTheAccountOwner >
< SupplementaryDetails > DEUTDEFFXXXIRVTDEFXXXXN011031 < / SupplementaryDetails >
< / F61 >
< / F61a >
< F61a >
< F61 >
< valueDate > 131101 < / ValueDate >
< DebitCreditMark > D < / DebitCreditMark >
< amount > 43730, < / amount >
< TransactionType > S < / TransactionType >
< IdentificationCode > 103 < / IdentificationCode >
< ReferenceForTheAccountOwner > C13110130526301 < / ReferenceForTheAccountOwner >
< SupplementaryDetails > BARCGB22XXXIRVTDEFXXXXN011033 < / SupplementaryDetails >
< / F61 >
< / F61a >
< F61 >
< valueDate > 131101 < / ValueDate >
< DebitCreditMark > D < / DebitCreditMark >
< amount > 58000, < / amount >
< TransactionType > S < / TransactionType >
< IdentificationCode > 202 < / IdentificationCode >
< ReferenceForTheAccountOwner > FXT1311010000500 < / ReferenceForTheAccountOwner >
< ReferenceOfTheAccountServicingInstitution > FXT1311010000500 < / ReferenceOfTheAccountServicingInstitution >
< SupplementaryDetails > BKAUATWWXXXIRVTDEFXXXXN011116 < / SupplementaryDetails >
< / F61 >
< / F61a >
< F61a >
< F61 >
< valueDate > 131101 < / ValueDate >
< DebitCreditMark > D < / DebitCreditMark >
< amount > 59826,21 < / amount >
< TransactionType > S < / TransactionType >
< IdentificationCode > 103 < / IdentificationCode >
< ReferenceForTheAccountOwner > FX5446070 < / ReferenceForTheAccountOwner >
< SupplementaryDetails > CHASGB2LXXXIRVTDEFXXXXN011031 < / SupplementaryDetails >
< / F61 >
< / F61a >
< F61a >
< F61 >
< valueDate > 131101 < / ValueDate >
< DebitCreditMark > D < / DebitCreditMark >
< amount > 60309,4 < / amount >
< TransactionType > S < / TransactionType >
< IdentificationCode > 103 < / IdentificationCode >
< ReferenceForTheAccountOwner > 01987HS016415 < / ReferenceForTheAccountOwner >
< SupplementaryDetails > EFGBGRAAXXXIRVTDEFXXXXN011458 < / SupplementaryDetails >
< / F61 >
< / F61a >
< F62a >
< F62M >
< DCMark > D < / DCMark >
< date > 131101 < / Date >
< currency > EUR < / currency >
< amount > 3736765,9 < / amount >
< / F62M >
< / F62a >
< / MT970 >
< / document >
< / canton4 >
< / FinMessage >
Thank you
Siva Prakash

under query works for the 1 iteration. but for several games I get following error.

When you want to present the groups repeating in relational format, you must extract the sequence of elements of the main XQuery expression.

Each element is then spent the COLUMNS clause to be more shredded into columns.

This should work as expected:

Select x.*

ABC t

xmltable)

XmlNamespaces)

default 'urn:swift:xsd:fin.970.2011 '.

, 'urn:swift:xsd:mtmsg.2011' as 'ns0 '.

)

, ' / ns0:FinMessage / ns0:Block4 / Document/MT970/F61a/F61 '

in passing t.col1

columns F61ValueDate Varchar (40) Path 'ValueDate '.

, Path of the DebitCreditMark Varchar (40) "DebitCreditMark".

, Varchar (40) path 'Amount' rise

, Path TransactionType Varchar (40) "TransactionType".

, Path of the IdentificationCode Varchar (40) "IdentificationCode".

, Path of the ReferenceForTheAccountOwner Varchar (40) "ReferenceForTheAccountOwner".

, Path of the SupplementaryDetails Varchar (40) "SupplementaryDetails".

) x ;

Dynamic XQuery Type mismatch (ORA-19279)

Hello
I'm "ORA-19279: XPTY0004 - dynamic XQuery type mismatch: expected - singleton sequence got several sequence element" error with the XML block below. Query works well when there is no repeating element XML block (address, income and phone). In addition, the query looks good from a performance perspective?

with the trial as (select xmltype

("" < SampleRequest = xmlns:ns0 "http://abc.org/SampleRequest/one" xmlns ="http://abc.org/SampleRequest/one" > ")

< ns0:Address >

< ns0:AddressType >

< CurrAdrInd xmlns = "" > Y < / CurrAdrInd >

< OutOfAreaInd xmlns = "" > N < / OutOfAreaInd >

< YearDur xmlns = "" > 15 < / YearDur >

< MthDur xmlns = "" > 0 < / MthDur >

< / ns0:AddressType >

< AdrLine1 xmlns = "" > line 1 < / AdrLine1 >

< AdrLine2 xmlns = "" > line 2 < / AdrLine2 >

< AdrLine3 xmlns = "" > line 3 < / AdrLine3 >

< Name xmlns = "" > city < / name >

< PostCd xmlns = "" > 123456 < / PostCd >

< / ns0:Address >

< ns0:Address >

< ns0:AddressType >

< CurrAdrInd xmlns = "" > N < / CurrAdrInd >

< OutOfAreaInd xmlns = "" > Y < / OutOfAreaInd >

< YearDur xmlns = "" > 5 < / YearDur >

< MthDur xmlns = "" > 0 < / MthDur >

< / ns0:AddressType >

< AdrLine1 xmlns = "" > line 1 < / AdrLine1 >

< AdrLine2 xmlns = "" > line 2 < / AdrLine2 >

< AdrLine3 xmlns = "" > line 3 < / AdrLine3 >

< Name xmlns = "" > city < / name >

< PostCd xmlns = "" > 987654 < / PostCd >

< / ns0:Address >

< ns0:Customer >

< TitleCd xmlns = "" > Mr < / TitleCd >

< FrstName xmlns = "" > customer 1 < / FrstName >

< midName xmlns = "" / >

< name xmlns = "" > LAST < / LastName >

< BrthDt xmlns = "" > 1979-06-21 < / BrthDt >

< / ns0:Customer >

< ns0:Income >

< IncmTypeCd xmlns = "" > gross < / IncmTypeCd >

< IncmAmt xmlns = "" > 2700 < / IncmAmt >

< / ns0:Income >

< ns0:Income >

< IncmTypeCd xmlns = "" > other < / IncmTypeCd >

< IncmAmt xmlns = "" > 1500 < / IncmAmt >

< / ns0:Income >

< ns0:Telephone >

< PhnNumTypeCd xmlns = "" > home < / PhnNumTypeCd >

< PhnAreaCd xmlns = "" > 123 < / PhnAreaCd >

< PhnNum xmlns = "" > 123467 < / PhnNum >

< / ns0:Telephone >

< ns0:Telephone >

< PhnNumTypeCd xmlns = "" > work < / PhnNumTypeCd >

< PhnAreaCd xmlns = "" > 987 < / PhnAreaCd >

< PhnNum xmlns = "" > 9876543 < / PhnNum >

< / ns0:Telephone >

< / SampleRequest >

clob_xml') of double)

Select x.* from the test,

XMLTable (xmlnamespaces ('http://abc.org/SampleRequest/one' as "ns0"),)

' for $i in /ns0:SampleRequest

Return $i' from clob_xml

columns

path of varchar2 (10) ttl_cd ' / / ns0:Customer / TitleCd',

path of varchar2 (32) frst_nm ' / / ns0:Customer / FrstName ",

path of varchar2 (1) mid_nm ' / / ns0:Customer / MidName',

"path of varchar2 (32) last_nm ' / / ns0:Customer / LastName."

date path brth_dt ' / / ns0:Customer / BrthDt',

path of varchar2 (1) curr_adr_ind ' / / ns0:Address / ns0:AddressType / CurrAdrInd',

path of varchar2 (1) out_of_area_ind ' / / ns0:Address / ns0:AddressType / OutOfAreaInd',

path number (3) tm_at_adr_year_dur ' / / ns0:Address / ns0:AddressType / YearDur',

path number (2) tm_at_adr_mth_dur ' / / ns0:Address / ns0:AddressType / MthDur',

path of varchar2 (32) flat_num ' / / ns0:Address / AdrLine1',

path of varchar2 (32) hse_num ' / / ns0:Address / AdrLine2',

path of varchar2 (32) hse_nm ' / / ns0:Address / AdrLine3',

path of varchar2 (32) town_nm ' / / ns0:Address / name ',

path of varchar2 (8) post_cd ' / / ns0:Address / PostCd',.

path of varchar2 (1) incm_type_cd ' / / ns0:Income / IncmTypeCd',

path number (10) incm_amt ' / / ns0:Income / IncmAmt',

path of varchar2 (2) phn_num_type_cd ' / / ns0:Telephone / PhnNumTypeCd',

path of varchar2 (5) phn_num_area_cd ' / / ns0:Telephone / PhnAreaCd',

path of varchar2 (12) phn_num ' / / ns0:Telephone / PhnNum'

) x ;

Kind regards
Chandra KenR

Thanks, that's much clearer this way.

For example, to retrieve information related to income:

SQL > select x.*

tmp_xml 2 t

3, xmltable)

4 xmlnamespaces ('http://abc.org/SampleRequest/one' as "ns0")

5, ' / ns0:SampleRequest'

6 passage t.object_value

7 columns

8 path of varchar2 (10) ttl_cd ' ns0:Customer / TitleCd'

"9 road to varchar2 (32) frst_nm ' ns0:Customer / FrstName"

10 road of varchar2 (1) mid_nm ' ns0:Customer / MidName'

"11 road of varchar2 (32) last_nm ' ns0:Customer / LastName"

12, date of brth_dt path ' ns0:Customer / BrthDt'

13, path number (10) grs_incm_amt ' ns0:Income [IncmTypeCd = "Raw"] / IncmAmt'

14 road number (10) oth_incm_amt ' ns0:Income [IncmTypeCd = 'Other'] / IncmAmt'

(15) x

16;

TTL_CD FRST_NM MID_NM LAST_NM BRTH_DT GRS_INCM_AMT OTH_INCM_AMT

---------- -------------------------------- ------ -------------------------------- ----------- ------------ ------------

Mr. customer 1 LAST 21/06/1979 2700-1500

On your question about performance:

Yes, there are some general guidelines to follow to get the best performance of the execution of XQuery.

Those are the storage dependent and independent storage, with greater importance of the former.

For example, in the test case above, I first stored the XML in a binary table of XMLType (TMP_XML): it is an optimization of storage-dependent.

I also removed all the descendants axis (/ /) for path expressions: those who were not needed and should be avoided if the exact location of the target node is known, this is typically an independent optimization of storage.

You will find everything you need to know in details here:

http://www.Oracle.com/technetwork/database-features/xmldb/overview/xmldb-bpwp-12cr1-1964809.PDF

ORA-19279: XPTY0004 - dynamic XQuery type mismatch: expected singleton GL entry

Hello
My version of db: database Oracle 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

I run this code:

    SELECT *
    FROM XMLTABLE (
        '/rowset/row/businessgroups'
        PASSING XMLPARSE (DOCUMENT '<?xml version="1.0"?>
<rowset>
<row>
<model>xt100</model>
<businessgroups>
  <businessgroup>retail</businessgroup>
  <businessgroup>restaurant</businessgroup>
</businessgroups>
</row>
</rowset>')
        COLUMNS businessgroup VARCHAR2(30) PATH 'businessgroup')

error:
ORA-19279: XPTY0004 - XQuery dynamic type mismatch: expected singleton sequence - got multi-item sequence

The error is coming as I walked him several elements in the xml file.
Is it possible to modify the code to get a list of the businessgroups, as below

output:
retail
restaurant

If I make a few changes in the code, I get the output as below, but I want as above:

retailrestaurant

Please advice.

Connected to Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
Connected as apps

SQL>
SQL> SELECT *
  2      FROM XMLTABLE (
  3          '/rowset/row/businessgroups'
  4          PASSING XMLPARSE (DOCUMENT '
  5  
  6  
  7  xt100
  8  
  9    retail
 10    restaurant
 11  
 12  
 13  ')
 14          COLUMNS businessgroup VARCHAR2(30) PATH 'businessgroup')
 15  /

SELECT *
    FROM XMLTABLE (
        '/rowset/row/businessgroups'
        PASSING XMLPARSE (DOCUMENT '


xt100

  retail
  restaurant


')
        COLUMNS businessgroup VARCHAR2(30) PATH 'businessgroup')

ORA-19279: XPTY0004 - XQuery dynamic type mismatch: expected singleton sequence - got multi-item sequence

SQL>
SQL>
SQL> SELECT *
  2      FROM XMLTABLE (
  3          '/rowset/row/businessgroups/businessgroup'
  4          PASSING XMLPARSE (DOCUMENT '
  5  
  6  
  7  xt100
  8  
  9    retail
 10    restaurant
 11  
 12  
 13  ')
 14          COLUMNS businessgroup VARCHAR2(30) PATH '.')
 15  /

BUSINESSGROUP
------------------------------
retail
restaurant

SQL>

ORA-19279: XPTY0004 - dynamic XQuery type mismatch

Hi all
When I run select it below the statement I had the "ORA-19279: XPTY0004 - dynamic XQuery type mismatch: expected - singleton sequence got several sequence element" oracle error.

select valtag 
  from XMLTABLE( '/root'
                 passing XMLTYPE('<root>
                                              <subroot><valtag>6666446612</valtag></subroot>
                                              <subroot><valtag>6666446613</valtag></subroot>
                                  </root>'
                                 ) 
                Columns
                      valtag varchar(20) path 'subroot/valtag'
               ) s

required result:
VALTAG
---------------
6666446612
6666446613

Please let me know where I made the mistake?

Thank you
RAM.

Published by: Rama Krishna.CH on November 26, 2012 15:48

Please let me know where I made the mistake?

The main manifestation of XQuery (here = ' / root ') defines what will be the relational lines based on the result set.
(Strictly speaking, this expression must return a sequence of elements)

Here, so you want the element subroot be your 'line':

SQL> select s.valtag
  2  from XMLTABLE( '/root/subroot'
  3         passing XMLTYPE('
  4             6666446612
  5             6666446613
  6           ')
  7         Columns
  8            valtag varchar(20) path 'valtag'
  9       ) s
 10  ;

VALTAG
--------------------
6666446612
6666446613

type mismatch between cursor fetch and into clause

Hi all
Let us, considering what follows in the 11g:

create table TEST1
(
  ID   NUMBER(38),
  COL1 NUMBER(38)
)
tablespace USERS
  pctfree 10
  initrans 1
  maxtrans 255;

CREATE OR REPLACE TYPE t_test IS OBJECT
(
   id NUMBER(38),
   col1 NUMBER(38)
)
;

CREATE OR REPLACE TYPE t_test_table IS TABLE OF t_test

and...

declare

cursor c is select 10 as id, 20 as col1 from dual connect by level < 1000;

v_data t_test_table;

begin
  

open c;
loop
  fetch c bulk collect into v_data limit 100;
  
  
  forall i in 1..v_data.count
    insert /*+ append_values */ 
    into test1 
    values(v_data(i).id, v_data(i).col1);
    
  exit when c%notfound;  

end loop;
close c;

end;

When we execute the statement we received the error:

ORA-06550: line 13, column 29:
PLS-00386: type mismatch found at 'V_DATA' between FETCH cursor and INTO variables
ORA-06550: line 13, column 3:
PL/SQL: SQL Statement ignored

I know that a possibility here is to change the V_DATA type as being the rowtype cursor... consider that I want to use the v_data data after a DML operations in other / something like cast iron table process.

Any ideas?

Thanks in advance,
Alexander.

Could you remove the indication (append_values) and see?

Error using DW import script. Utilities.fParseString: Type mismatch: 'CLng.
Is it possible to use CLng FDM import Scripts to convert a String data type to a Long data type, so that it can be evaluated numerically? Currently, I get the following error:

Error:
"Error: an error occurred importing the file."
Detail: Type mismatch: 'CLng.
Online: 13 "

Script:
Function TBNetwork (strField, strRecord)

Dim Inga
Inga = CLng (DW. Utilities.fParseString (strRecord, 8, 3, ","))

If Inga > 62100 then
TBNetwork = "Greater".
On the other
TBNetwork = "lower to."
End If

End Function

CSV data file:
Field1, Field2, Field3, Field4 sphere5, case Field6, Field7, Field8
101, B1000, 62100, L0000, 401, C00001, IY002, '-10,000,000.00.
101, B1000, 62100, L0000, 401, C00002, IY003, '-6,646,939.00 '.
101, B1000, 62100, L0000, 401, C00003, IY004, '-55,100,000.00 '.

Published by: Jubei on May 4, 2012 15:02
What is the header line?

Try

Function TBNetwork (strField, strRecord)

Dim Inga
Inga = DW. Utilities.fParseString (strRecord, 8, 3, ',')

If IsNumeric (Inga) then
If CLng (Inga) > 62100 then
TBNetwork = "Greater".
On the other
TBNetwork = "lower to."
End If
On the other
RES. PblnSkip = True
End If
End Function

Problem downloading of map to FDM in 11.1.2.1, receiving Type mismatch error
The format of mapping has changed in system 11 9 system changed?

One of my users who is responsible for downloading maps trying to download his Excel mapping document (that he used in version 9) in FDM 11.1.2.1 and receives a Type mismatch error.

Error log

ERROR
Code: 13
Description: Incompatibility of rank Type = 3 SrcDec = (000-general Cash) TargKey = (10000) = (False) WhereClauseType =(Error 2029) ChangeSign
Procedure: clsUtility.mRecordsetFromExcel
Component: upsWDataWindowDM
Version: 1112
Thread: 185652

Any help would be appreciated.
The error log usually has more lines that you have published and often multiple entries for a single mistake. In general, if you erase the error log, reproduce the error then post the entire contents, you provide information that helps help us you.

I'll venture a guess that you have formulas that makes your map template:

Description: Type mismatch row = 3 SrcDec = (000-general Cash) TargKey = (10000) = (False) WhereClauseType = *(Error 2029) ChangeSign *.

Make sure the first row of cards in the WhereClauseType column.

Type mismatch?

Similar Questions

Maybe you are looking for