Fingerprint Id does not not after 9.2.1 update

Similar Questions

• JDeveloper starts does not after MAF 2.1 update

  Hello

  12.1.3 JDeveloper / MAF 2.1 / Windows 7 Prof 64 bit / JDK 1.7

  I just updated the MAF from JDeveloper extension (Help - Check for Updates).

  I had earlier version 2.0 of the MAF and it worked very well.

  After this 2.1 update, I was not able to start the JDeveloper. The update succeeded.

  It gives me error when I try to open up JDeveloper below.

  I also tried to remove the "system12.1.3.0.41.140521.1008" folder, but it is still not start.

  I've seen other posts in this forum but some developers could start JDeveloper after the update.

  Can you get it someone please let me know if there is a way to solve this problem?

  Does JDK1.8? I still have my JDeveloper running on 1.7

  Error

  ------

  Warning - could not install some modules:

  Master + URL FileSystem - module named oracle.ide was needed and not found.

  Cache - module named oracle.ide extensions was needed and not found.

  Profiler Java (common) - none of the modules providing the org.netbeans.lib.profiler.common.Profiler capacity could be installed.

  JDeveloper/NetBeans bridge - module named oracle.ide was needed and not found.

  Actions - the module named oracle.ide bridge was needed and not found.

  Profiler Impl - module named oracle.ide.runner was needed and not found.

  Profiler Impl - module named oracle.ide was needed and not found.

  Profiler Impl - module named oracle.jdeveloper.runner was needed and not found.

  JDev projects via NB API - module named oracle.ide was needed and not found.

  GUI Builder to JDev - module named oracle.ide was needed and not found.

  3 additional modules could not be installed because of the above problems.

  Thanks for any help.

  Sameer

  Not exactly what goes wrong with your installation.

  In general JDeveloper 12.1.3 must be started with JDK 1.7

  You must also have 1.8 JDK on your machine, and the extension of the MAF will need to know its installed location.

  I suggest that you remove the system12.1.3 directory, and then re - install JDeveloper in a new location.

  When you install JDeveloper, if you use the installer of pot, make sure that start you with JDK 1.7.

  (Should be fine if install you using the exe file).

• exporting iMovie does not, after 9.3.1 update

  After I.O.S 9.3.1 update 2 days in my Ipad mini, I'm not able to export my projects to any mail mode, Youtube, etc. Export process get stopped half-way before completion, every time I try to do. I'm not able to export my projects.pl Advise.

  Have you tried to reset your device?

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• photo editor app now available, but does not, after the last new update

  Hi all

  strange experience that I wanted to stress with you all.

  I just had an update (this morning) to What's New build 3.0.A.0.2

  After you install this hotfix / update, then told me that "editing" is available for download. Build is 5.0.A.0.12

  I'm worried I have not had this app on my phone before - archive system applications reveals this is a new installation, rather than an update of an existing application.

  Also, I did not how to make it work, because there is no app on my home screen shortcuts. The app is not visible in the drop-down list app (when adding new items to my homescreens) either. Nor is the application in the list of main application (accessed with the key 6 points to the center of the permanent Panel shortcut on the home screen).

  I even tried to use a very useful app "quick shortcut maker" and even if I find photo editor in his list of activities, when I test the generated shortcut, unfortunately, I get "the photo editing software has stopped."

  Any ideas?

  I have a few apps disabled, so made photo editing have known all the dependencies?

  EDIT: I tried erase the photo editor and don't restart - no change.

  See you soon,.

  Gary

  Hi MyAliasIsGary

  Photo Editor is a system application only, it can be used when editing photo app to your Album or Photo. For example, if you go to Album > tap a photo > press the bottom icon that looks like a pencil on paper > Photo retouching tap.

• Even after the installation of the fingerprint scanner Scan fingerprint driver does not work

  I have hp pavilion dv6 7012tx and she was pre installed with windows 7, but now I have installed in windows 8 and my fingerprint reader does not work. I have installed finger print driver but its still does not, please help me.

  Thank you!!!

  Hey, I got it to work for me. Read what I posted in another thread

  (page 3) and see if it works for you also.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/HP-J070CA-Windows-8-1-validity-fingerprint-reader/TD-p/3025495/highlight/true/page/3

• Fingerprint reader does not work after the laptop awakens from his sleep.

  Pavilion DV6-6c15nr

  Windows 7 Home Premium

  Fingerprint reader works fine when the computer starts. The drive works fine if I manually lock the system. When the computer enters mode "sleep" through inactivity, then wakes up from his sleep, the fingerprint reader does not work. The player power led does not illuminate, the player does nothing if I drag a registered fingerprint. I must select use authentication information and enter the Windows password. Device Manager says device working properly but it doesn't help. I checked for BIOS, Windows and driver updates but I run in all aspects.

  Hello

  Uninstall the software and current driver for the fingerprint reader.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the latest driver from here.

  Download and install the latest version of the software from here.

• Fingerprint software does not recognize my fingerprints

  Hello

  I installed the 64-bit Windows 7 (using cd upgrade upgrade to win7 program)
  Installed all updates (windows)

  However, fingerprint software does not recognize my fingerprints-. -.
  The first two are fine, but the third party never works, it's the same story for all my fingers...

  I HAD the program works perfectly until I reinstalled my OS
  For some reason, I remember the same problem last time I had to reinstall, do not remember what I did to remedy

  any advice?
  Thank you for your time and help!

  Edit:

  To add a few details:
  It worked before
  The hardware is not the issue (he reads my fingers)
  It is software or just my DNA changes my fingerprints-. -.
  I can't remember which version of the software / I downloaded the last time, but I find the latest software online on this site and found

  In addition, the FACE program does not work either
  He was working before I reinstalled the operating system
  Is it just me or all the security programs like simply not me-. -.

  Hello

  In your case, I recommend you remove all traces of fingers first.
  Then, uninstall the software and clean the registry with CCleaner.
  Then download the new software for fingerprint for the computer laptop and Win 7
  After that, scan and configure the fingerprints once more.

  In regards to the face recognition software;
  You must uninstall this too and need to download the latest version of this software for Win 7

  Good luck

• HP Probook s 4540: fingerprint reader does not

  Hello

  Problem: fingerprint - Windows journal reader under does not have the ability to connect via the fingerprint reader.

  Overview: after installing the drivers of the fingerprint on the HP site and thanks to the HP protection tools to register successfully to fingerprints, I tried to log in via this method, but the Windows Connect screen does not display this option. Device Manager correctly identifies and shows the fingerprint sensor - however, the Control Panel does no detection of biometric devices.

  I really need help with this problem. Details of what steps I took trying to make the scanner work are given below.

  Specs:

  1) 4540 probook s

  (2) Windows 7 64 bit

  (3) i5 - 3210 m, 1 GB Hd 7650 m, 4 GB at 1333 Mhz, 750 GB 5400 RPM, VFS 491 fingerprint reader.

  Details of the problem and the steps of my work to install the drivers:

  After a new installation of Windows 7, I went on the site of HP driver to download the latest drivers for Probook s 4540:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5229457&...

  I installed the drivers in roughly in this order:

  drivers ethernet controller 1) realtek.

  drivers audio 2),

  (3) the chipset and USB 3.0 drivers (but not the Intel MEI driver)

  (4) Intel video driver: a problem such that the pilots were not allowed to install. After you disable switchable graphics in the bios, I was able to get these drivers to install.

  (5) AMD video drivers: installed after graphic driver intel HD - installed but Catalyst Control Center was not displayed. Then I reactivated switchable graphics in the BIOS, re-installed these drivers and CCC was now available.

  (6) support for HP keyboard shortcut

  (7) HP Universal camera driver

  (8) fingerprint sensor fingerprint validity

  (9) Synaptics Touchpad driver

  (10) Atheros wifi & bluetooth

  (11) Jmicron card reader

  After driver installation, I installed the HP protection tools. According to request a reboot of the PC, which I did-, he asked for the setting up security etc... Part of this pocess was the registration of fingerprints - successful. However, log off / restart of windows, an option to connect with the fingerprint reader does not appear in the Windows login screen.

  I open the control panel and found there wasn't that no biometric device only tab, even if the Device Manager showed biometric sensor, device and validity (VFS 491). I then uninstall HP protect tools and driver validity sensor fingerprint, and made sure that these services are running:

  -Credential Manager

  -Remote Procedure Call (RPC)

  DCOM Server process Launcher-

  RPC end point mapper-

  -Windows Biometric Service

  Plug-and-Play

  Then as suggested in another post on the forum, I installed first of all this:http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55109.exe , then the drivers of the validity of 4540 s drivers page, then HP protection tools.

  After the reboot HP protect tools as before to register my fingerprints, but still no windows login prompt came to connect with fingerprints. However, a change after installtion of http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55109.exe that has been in Control Panel it is now a tab for biometric devices. However, it is said that windows did not find it all installed biometric devices. A picture is attached showing the Device Manager and Control Panel!

  Please HP offer a solution. Thank you!

  

  OK problem solved. I don't know if it is related to the HP windows 7 system essential updates driver installation and Intel MEI or not - but I install these.

  What has really worked probably was it - > install the drivers of fingerprint and then the HP protection tools. Once rebooted, open HP tools protect, then return to the administration in the lower right corner-> the administration Console-> increase of security system-> tick windows login security and your done. Now, you will be able to connect through fingerprints registered.

• (SimplePass) fingerprint reader does not work or missing? (Windows 8)

  Hey guys,.

  I see many people running on the issues where he fingerprint reader does not work after the upgrade. Most of these problems come from the books that is not supported by Windows 8.

  If you run a question using biometric (fingerprint reader) missing or does not work to all install IT.

   

  

   

  THX

  Hope it will be useful.

  THX

• fingerprints fingerprints & brightness does not not with windows 8 build in hp probook 4540 9200 s

  HP probook 4540 s

  Windows 8 build 9200

  I detected a problem after the installation of the new operating system windows 8. fingerprint sensor does not work. After installing hp protect tool pilot there show an error message. his revealing "microsoft framework 3.5 required", but I have framework 4.5... Correct this essue as soon as possible. and another problem is brightness does not perfectly.all shortcuts keyboard not work except the brightness. and I can't reduce it manually too.my windos is enabled. and run fast on my laptop. Please fix my problems as soon as possible.

  Thank you.

  Hello thatguy2,

  Your ProBook is a business model.  Your question would better answer on the HP Enterprise Business Community Forum

• Tecra A11 - 11L - fingerprint sensor does not work

  Hello
  I had a problem with my Tecra laptop. The fingerprint sensor does not work since yesterday. It also disappears from the hardware Manager. I tried to reinstall the utility, but the setup.exe will not run successfully. When I try to install the utility directly from the amd64 Directory installation will be successful, but the software is unable to connect to the fingerprint sensor. I also tried to install the original Windows image, but the sensor does not work.

  You have any ideas?

  Berst cordially
  Thunder1988

  You can try a BIOS update and set the default BIOS. If it still does not appear in Device Manager, the player is maybe defective or there is a connection problem. I'm guessing that the laptop is still under warranty, you may have to send the laptop to a Toshiba repair center.

• Fingerprint reader does not react anymore while the software seems to work (Thinkpad E530 Windows 10)

  I used logg in via the reader of fingerprints (windows 10) with no problems, now the fingerprint reader does not react anymore when I pull the finger. I managed to remove all the passwords in the password manager (still not sure about it as I don't really understand how all the components work together) hoping that would solve the problem. Not the fingerprint reader software keeps asking me to register a new finger. Everything seems to work fine (I can pick a finger to be registered, type my password windowns) until I asked me to draw the finger on the fingerprint reader: nothing happens! The indicator that shows how the finger was scanned shows nothing at all. Looks like the software works, but the fingerprint reader itself is dead. However, looking into the information system the "TouchStrip Fingerprint Sensor' (WBF mode advanced) seems to work fine.

  Help, please. I don't have any idea how to find out what's not here.

  Thank you very much for the tip! He works in fact :-). Even if it does not seem logical to me, as I never put it in place a front pin - and fingerprint reader work very well even without PIN code. But who cares - the main thing is it works now! So thanks a lot again :-)!

• The fingerprint sensor does not work

  Hello, I have reset windows on my laptop and the fingerprint sensor does not work, windows recognize the sensor, but in the Device Manager, windows says there is a problem with the sensor, "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Thank you for your attention

  I finally found the problem reset the pc thanks for your attention somehow

  Good day.

• HP envy: HP Envy fingerprint reader does not

  Simple pass works well using the password or PIN.  The fingerprint reader does not work. no light help please

  icp_wolverine wrote:

  MAKE SURE THAT THE ATOMIADES SENSOR IS INSTALLED AND REINSTALL HP SIMPLEPASS

  ALSO TRY A HARD RESET IF A STOP OF THE LAPTOP, UNPLUG POWER SUPPLY, BATTERY, BUTTON FOR 10 SECONDS TO TAKE... BATTERY PUT IN PLUG POWER CORD BACK LIGHTS FOR LAPTOP

  Please how do I check if the sensor is installed.  I tried the Hard reset without success. Thank you

• AutoComplete doesn't work does not after installing IE *.

  AutoComplete URL function works does not after installing IE8.  Looking at the Advanced tab properties IE I see an option to use AutoComplete (which is
  ticked off) but it is said to "..". turn of Internet Explorer".  Whatever that means, and how I seized not semi-automatic work again under IE8?  I can go back
  for IE7, if it's the only way.   I tried to hit "reset" on the Advanced tab I saw a thread on try this - but no go...  Thank you

  sjakulski,
  Thank you for visiting the Microsoft Answers community forum.

  In Internet Explorer 8, the Auto complete option is in a new tab.  Go to tools, Internet Options and then click the content tab.  You will see a section that says "Auto-Complete".  Click on the 'Settings' button and it gives you several choices of auto complete options.

  This should solve your problem.  Let us know if you need more information.
  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Scan fingerprint ThinkPad does not work; Don't remember the password

  * Original title: password reset

  ThinkPad/w Windows7 woman is locked.  Fingerprint reader does not and PW forgotten.  How to participate?

  Hi Steve,.

  If you have forgotten your Windows password and you are on a domain, you must contact your system administrator to reset your password. If you are not on a domain, you can reset your password by using a reset disk of password or by using an administrator account. For more information, see create a password reset disk or reset your Windows password.

  If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to connect to Windows and you will need to re - install Windows.

  You can also visit the following links:

  What to do if you forget your Windows password

  Solutions to common problems with logging on Windows

  Change your Windows password

  Microsoft's strategy concerning lost or forgotten passwords

  Keep secure passwords - Microsoft strategy on move the passwords

  If you have purchased Windows and lost the disk

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.