Type of sample time can be changed to in MAX?

Similar Questions

• Satellite A200 - 14 d: how many times can I change the screen resolution

  I would like to ask if often resolution change may damage the screen of my Satellite A200 - 14 d?

  Because now I'm programming in Assembly in resolution 640 x 480, and whenever I run a program, the screen should change its 1280 x 800 to 640 x 480 resolution, and it takes 1-2 seconds: it is empty, the backlight turns off, then the new resolution appears. I would like to ask if it permanently (often) could damage my LCD?

  Thank you.

  Don't worry man, it will not damage the screen ;)
  You can change the screen resolution often unhesitatingly ;)

• Regarding my "wordpad"... How can I change the right margin in my document?

  How can I change the right margin on my page when you type?

  How can I change the right margin on my page when you type?

  Open wordpad > look right > if your margin ends 5, there will be a pointer of less than 5 years > move the pointer (cursor) to the margin you want to implement.

  See screenshot...

  

• Can I change color of flipping Captivate ceiling buttons?

  I use a nice built in button that comes with 8 Captivate. However, I don't like the green color of reversal. Can I change the color of overview for this button?

  It is an Image button that comes with 8 Captivate.

  Thank you

  Image buttons are 'old' (I no longer used): to customize you create three images with a graphics application. The images must have the same name, followed by _down and respectively _up anime_survol. You can use any other compressed format, GIF or PNG. Take a look at the Gallery\Buttons for examples. When you want to use this custom button, you point to one of the three images and Captivate can detect the other two. One of the biggest drawbacks for me of this type is that you can not change the label, you must create 3 images for each button with a different label. Easier way with transparent buttons and form.

• sampling time changed the buckle timed

  Hello world

  I use the timed loop to control the DC motor with the vi of PID. in the loop and the sampling time are defined as 0.01 s. However, after I added a few other screws in the loop, for example, writing of measure file.vi, to collect the errors between the angle and the practical perspective of the engine for the time histroty the movement of the motor, we find that the sampling time changed, not always 0.01 s before the vi has been added, but 0.01 or 0.02 s. the entire program desinged to be fininshed with 7 s, now's done it at 9.4 s, that is, execution of the loop time is extended.

  Another thing is, if the sampling time is defined as s 0.05, the sampling time is always 0.05 s and the execution time of the loop is always 7 s as predined, regardless of writing custom file.vi is added in the loop or not.

  As a result, I think that if the complexity of the loop is incresead and time of sampling sets is small, then the actual sampling time will be modified due to the design of things load in the timed loop. What is the reason? If so, are there methods to solve?

  It is important: the collection of the angular error of the engine in the time histrory is very important, which will be used to show the correctness of the settings KP, KI and KD.

  A friend suggested using the queue vi, but I don't really know how to use them. Can someone give some instructions?

  Thanks a lot!

  See you soon

  Cram features in a timed loop is like stuffing 5 books you know that in a book bag 3. The timed loop is only really practical on a rt system, but even in this case, if the code inside requires more time than the period of the loop, there is no magic that the loop can do to increase the execution time. Just point out you that the loop is late. The solution is to remove features from the inside of the loop. Writing to a file of measure is one of the worst if you write to a text file. Look at the producer/consumer model of design that you have examples of. There, you will have a normal loop that you will write to a queue, and a second loop will process data in the queue. Use file > open...

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Save my pictures worked with adobe photoshop 9. keeps telling me unable to open, the wrong type of file and it says it's a "file 2" - How can I change this please

  How can I change the type of file it becomes an adobe raf or raw file, it worked with the camera but the pc is save them as files of type 2 and photoshop 9 does not open these.  I have a fuji s2 pro if it's any help, thank you.

  http://www.Adobe.com/support/downloads/product.jsp?product=106&platform=Windows&promoid=HTENB

  You can use the free DNG Converter from Adobe, download the file above.

  DNG is digital negitive and it's open in Camera Raw Editor.

  This converter supports more than 500 different types of camera.

  If someone sends you a raw file and your Raw editor does not support this type of camera, you use the converter.

  Once converted, you can open it.

  http://helpx.Adobe.com/Creative-Suite/KB/camera-raw-plug-supported-cameras.html

  The list above shows FinePix S2 Pro, RAF file type,

  A plug-in version Camera Raw minimum required 1.0

  http://helpx.Adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  The list above shows Photoshop Elements 9 comes with the Camera Raw plug-in version ... 6.1

  Compatible with Camera Raw-plug-in, thanks to the version... 6.5

  http://helpx.Adobe.com/cfusion/search/index.cfm?loc=en_US&term=elements%209%20raw%20update

  The list above shows that there is an update to Camera Raw in Photoshop Elements 9... 6.3 or 6.5... 6.5 it is better.

  It also shows an update for first items 6.4.1 9 If you who also have.

  You can also get updates through the app.

  However you do not have these updates now since your comes with the version is 6.1 and the

  Plug in Camera Raw minimum required version is 1.0

  OK... so it shows your camera has not been defined to take RAW images or you downloaded the wrong file in Photoshop.

  Most cameras that take RAW images have a framework for Raw images only or adjustment to take RAW images and regular at the same time.

  Test your camera again files for RAF types and if you do not check your settings of the camera again.

  You can not save or convert a regular image as a type RAW or DNG file.

  http://forums.Adobe.com/index.jspa?promoid=JOPCT

  I am a member of the Adobe forums, help is very good, the link above will take you there.

  I hope that helps.

• My laptop goes to "standby mode" much too quickly (Windows 7). How can I change the settings to extend this time?

  original title: sleep mode settings

  My laptop goes to "standby mode" much too quickly (Windows 7). How can I change the settings to extend this time?

  Click on start > Type, sleep > change when the computer sleeps

• I can not change the type of standard user to the admin account.

  I had a very difficult time, adding new accounts to the system.  Now that I have, I can not change the type of standard user to the admin account.

  As you don't declare that you tried, I am unable to say where you went wrong. Here is a method to promote the accounts without going through the various GUI screens:
  1 restart in SafeMode with network.
  2. log on as an administrator.
  3. click on start.
  4. type the three letters cmd in the search box.
  5. press on Ctrl + Shift + Enter
  6. click on "run as Administrator".
  7. type the following commands and press ENTER after each:
  NET user
  (This will show you all existing accounts)
  net localgroup administrators 'xxxx '.
  (This will encourage user xxxx to Administrator status. Replace xxxx with the correct name account).

• How can I change my location maps/time?

  Ho can I change my home location in maps/weather?

  I live in Wales and Windows thinks I'm in North Yorkshire!

  Moved from feedback

  Internet Explorer unspecified version

  Hi Francis,.

  Thanks for posting your query in Microsoft Community.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. what version of Windows operating system is installed on your computer?

  2 did you do changes on the computer before the show?

  If you are having problems using the card and the weather app in Windows 8, you can follow these steps and check:

  To work with the issue, I suggest you to change the location and time zone.

  To change location:

  a. press the Windows key + W , click settings

  b. type area and press enter

  c. click on the location tab and change the location.

  To change the time zone:

  a. press the Windows key + W , click settings

  b. type the Date and time and press enter

  c. the Date and time tab, click change time zone and change the time zone.

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• How can I change the type of image file to download on a site like walmart or walgreens for printing?

  How can I change the type of image file to download on a site like walmart or walgreens for printing?

  In general, they will accept the image in the format, that it was taken (if it was taken by the majority of cameras or cell phones).  But if so, you have a few options.

  The most simple and integrated solution is Microsoft Paint.  Yes it is from the 1980s, but it still works and changes of a good job for a time.  Just to right click on the photo file, choose open with and choose paint.  Then go to file > save as and save this return as the file type you want it to be (like PNG or BMP or JPG, quality declining in the JPG option).

  If you need more options like changing the quality he uses during conversion, another free option (of the very very many) is Paint.NET, an open source free image editing program. http://www.dotPDN.com/downloads/PDN.html

  There are also programs that can do it in bulk, so you can highlight 300 photos and do convert them all at once.  You can do this for free or with tools like Photoshop.

• I can't change the time zone, date or account settings

  I recently installed Windows 8 and put in place a local account as a Microsoft account. Problem is, after the connection with my Microsoft account, I can no longer access the local account, change the date or time. The computer is checked on my Microsoft account. I'm going to user settings and literally I can't do anything, despite being an administrator. I clicked on several of the options, but they do not react in any sort of way.

  There are the links:
  (1) change your account type
  (2) manage another account
  (3) change user account control settings

  Any unreactive.

  I'm going to change the time and I get the message:

  [Window title]
  Date and time

  [Main instruction]
  Unable to continue

  [Content]
  You are not allowed to perform this task. For help, please contact your computer administrator.

  So, I turned on the local administrator account. And it won't let me change the account settings, but it will allow me to change the date and time. It's funny.

  So, how can I make my original local account available again? Why am I having these problems with the operating system in the first place?

  PS - I find more and more things I can't access, such as parental control. It really starts to check me.

  You have a virus I guess juice to refresh the PC if it does not work go for Reset, see this link: http://winsupersite.com/windows-8/windows-8-tip-reset-or-refresh-your-pc

• A question about the conservation of fields (hour, min, sec) time DATE type in the table on the changes of NLS_DATE_FORMAT

  Hello

  Oracle version: 12.1.0.1.0 - 64 bit

                    OS:   Fedora Core 17 X86_64

  My question is about the conservation of fields (hour, minute, second) time DATE type in the array on NLS_DATE_FORMAT changes.

  Take the following test case:

  SQL> create table tmptab(dateval date);
  
  Table created.
  
  SQL> alter session set nls_date_format = 'yyyy-mm-dd hh24:mi:ss';
  
  Session altered.
  
  SQL> insert into tmptab(dateval) values('2014-01-01 00:00:00');
  
  1 row created.
  
  SQL> insert into tmptab(dateval) values('2014-01-01 10:00:00');
  
  1 row created.
  
  SQL> commit;
  
  Commit complete.
  
  SQL> select * from tmptab;
  
  DATEVAL
  -------------------
  2014-01-01 00:00:00
  2014-01-01 10:00:00
  
  SQL> alter session set nls_date_format = 'yyyy';
  
  Session altered.
  
  SQL> select * from tmptab where dateval > '2014';
  
  no rows selected
  
  SQL>
  

  I don't understand why it returns nothing. The second test case above insert statement inserted a line with 10 as the value for the time of the DATE field column dateval.

  Accordingly, while comparing this with the literal '2014' (which based on the new value of NLS_DATE_FORMAT = "yyyy" is implicitly converted to DATE), shouldn't the above query returns the line 2014-01-01 10:00 ?

  I mean, I changed the NLS_DATE_FORMAT but data from time in the table fields are preserved and that's why they should normally be taken into account in the comparison of date.

  What I'm trying to say is that for me (Please correct me if I'm wrong), no matter what NLS_DATE_FORMAT configuration is the following test

  SQL> select * from tmptab where dateval > '2014';
  

  is the same thing that

  SQL> select * from tmptab where dateval > to_date('2014-01-01 00:00:00', 'yyyy-mm-dd hh24:mi:ss');
  

  And because the line 2014-01-01 10: 00:00 in the tmptab table. The following test

  2014-01-01 10:00:00 > to_date('2014-01-01 00:00:00', 'yyyy-mm-dd hh24:mi:ss')
  

  evolves normally true (beucase of TIME = 10 on the left side of the test) and therefore this line must be returned which is not the case in the test above.

  You kindly could you tell me what I misunderstood?

  Thanks in advance,

  This is the price for the use of implicit conversions. Implicit DATE conversion rules are not as direct as it can be assumed. In your case, all you provide is year as date format. In this case date implicit conversion rules assumes that month in the current month, day 1 and time as 00:00:00.

  SQL > alter session set nls_date_format = "yyyy";

  Modified session.

  SQL > select to_char (to_date ('2014 "), ' mm/dd/yyyy hh24:mi:ss') twice;

  TO_CHAR (TO_DATE('20)
  -------------------
  01/08/2014-00:00:00

  SQL >

  So, when you start:

  Select * from tmptab where dateval > '2014 '.

  Oracle implicitly converts date using "YYYY", which translates as August 1, 2014 '2014'. That's why your quesry returns no rows.

  SY.

• How can I change font family of all titles at the same time?

  I used the first cs 6 to add some titles be subtitles, but I need to change the font family, how to change their entire family of fonts at the same time? Thank you

  You can not.  For now, it's both.  But it would be nice if the PP had a kind of this feature of type CSS, where you can set fonts, sizes, colors, etc. in one 'preset' and have these parameters to ripple through all titles of the project whenever the preset has been changed.  Please tell Adobe you want such a feature.

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• Can I change the date and time on my account?

  Is there anywhere on this site where I can set the details of the date and time?

  When I posted a recent issue, the date and time were incorrect IE not my country date & time.

  Thank you

  Sylvia

  PS Sorry if this is the wrong place to post this question, not that the possibilities of passage are really there?

  The date and time are universally on us Pacific time zone. You can't change it.