Type with the Smartband ON is recorded as of the steps

Similar Questions

• When I try to type with the keys that have numbers on them, I have numbers instead of letters.

  The keyboard of my laptop does not work correctly.

  I have somehow turned the keys of the calculator and when I try to type with the keys that have numbers on them, I have numbers instead of letters.  Does anyone know how to disable this option?

  I use a laptop with a wireless keyboard to send this message, but want to use my laptop keyboard.
  Help!

  Hi newsgirl,.

  Somewhere at the top of the laptop keyboard is a key that says Num Lock (or Num Lk or something like that).  It can be accessed directly, or you may need to press a key to access (or some other keys).  In any case, you must click this to turn off the number lock because it is what causes the problem.  This key is usually used on laptops to create a section of a regular keyboard that can act as the normal keyboard calculator keypad (for those who need that, like accountants or persons who need to enter strings of numbers).  Once you turn it off, you will be fine as the keyboard returns to normal.

  I hlpe that aid.

  Good luck!

• 'Page' does not name a type with the given Code problem

  Hello

  I try the code on this page , but I'm getting 'Page' does not designate a type in the Test.hpp file with the following line

  private:

  Page * appPage;

  Container * mRootContainer;

  };

  What could be the solution for this problem?

  OK I solved this problem with the addition of bb::cascades with the page
  Please take a look at the following code

  private:

  BB::Cascades:page * appPage;

  BB::Cascades:container * mRootContainer;

  };

• BlackBerry Smartphones Don't capitalize my first letter when you type with the phyiscal keyboard

  Whenever I type a message, it will not capitalize my first word unless I type and then delete at the back. Which is pretty annoying. Does anyone else have this problem or how to fix it?

  Fixed with the new update!

• FileSelectPopup, several types with the same extension

  Hello

  When you use a popup of file selection with several types of files for a SAME extension, such as:

  FileSelectPopup ("", "*.tiff (8 bits) ', *.tiff *.tiff";(16 bit) "(8 bits)," save under ", VAL_SAVE_BUTTON, 0, 0, 1, 1, file");

  Y at - it no way of knowing what 'Save as type' has been selected by the user on the popup?

  (win7x86; 2010 CVI)

  see you soon,

  DIZ

  None that I know.

  In your case, you will need to review the content of the actual file to discriminate between the different types available: I guess that's what programs focus on the image. A tiff file should have a header that specifies what tye of image is stored in it.

• Create the view with the CLOB of TABLE data type with the LONG data type

  Please need support to create the table view
  Source table: (itemid varchar2, longrec)
  need to create the table view Source
  (itemid varchar2, CLOBrec)

  A BUSINESS object must have a storage in the database, so you can't have a CLOB column in a view by pointing to a not lob data column.

  Max
  [My Italian blog Oracle | http://oracleitalia.wordpress.com/2010/01/17/supporto-di-xml-schema-in-oracle-xmldb/]

• Running Firefox 10.0.2, can not add new Mycroft Project search engines. Error message: "you need a browser that supports opensearch to install this plugin" Please help with the steps on how to solve this problem in Firefox, thanks

  Cannot add new Mycroft Project search engines in FF 10.0.2. Error message states: "you will need a browser that supports opensearch to install this plugin.

  You can install the Sherlock plugins or lacking as well?

  • http://mycroft.mozdev.org/Google-search-plugins.html

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• Unexpected behavior with the Option "record in the result.

  Hello

  I have unexpected behavior with the Option "record in the result.

  I have a few steps in the subsequence 'X', this subsequence passes a Boolean parameter. According to the value of the parameter I change the "Recorgind results" Option to report it or not. The thing is that if 'result Recorgind' set at race time I modofy by changing the value of Step.ResultRecordingOption to "Enable" and "Disable", the step is not reported until the same sous-suite 'X' is called for the second time (without changing the parameter passed).

  For example: (Preconditon: result Recorgind Option of all value sous-suite x are defined as Disable)

  1 CallSubsequenceX(Parameter: Enable)

  2 CallSubsequenceX(Parameter: Enable)

  3 CallSubsequenceX(Parameter: Disable)

  4 CallSubsequenceX(Parameter: Disable)

  Expected result:

  1. measures have been reported.

  2. measures have been reported.

  3. measures have not been reported.

  4. measures have not been reported.

  Result:

  1. measures would not same value Step.ResultRecordingOption has been changed to 'enable '. (Not Ok)

  2. measures have been reported. (Ok)

  3. measures reported same value Step.ResultRecordingOption has been changed to 'disable '. (Not Ok)

  4. measures have not been reported. (Ok)

  I use TestStand 2013 (5.1.0.226)

  Thanks in advance.

  -Josymar.

  Hi josymar_guzman,

  I just review the sequence and indeed we´re experience unexpected behavior with the Step.ResultRecordingOption callback. By a reason when you run the callback in the expression before each step section, the statement runs only until the next sequence is called, which is not what we want.

  To avoid this, you can place a statement before each step of the sequence, so you can change the State of the Option "record result" for the sequence running (and it is only the following). You can try something like this

  

  where the expression of the statement will be the recall "RunState.NextStep.ResultRecordingOption is YourCondition". With this, we guarantee that the results of the next step will be saved or not. I also remove the expression in the expression prior to each step section, because the condition is now on the statement before each step.

  I tried and it works fine. I´ll set the sequence that you share with me, with the changes. I hope this will help you and solve your problem.

• When I type some letters on the keyboard type numbers with the number lock.

  Original title: change keyboard type.

  have a Hp laptop, I have managed to change the keyboard accidentally and now when I type with the number lock some letters on keyboard etc not the letter that is the letter lkj type numbers become 123 of the normal keyboard. HELP have what setting I changed it looked cant find any info. I have enabled the language setting and have defined as UK can not see anything that would affect the settings. My laptop has a normal qwerty keyboard with a locket key number on the baord. Can anyone suggest how I do for this comes back to normal please.

  [Moved from comments]

  Hi Martin,

  Thanks for the reply.

  He would be grateful if you can answer these questions to help you further.

  1. What is the exact model of the laptop HP number?

  2. you receive error messages when you install the software download?

  You can try to uninstall and reinstall the keyboard software

  Step 1: Uninstall the keyboard software.

  a. click Start, type device in the search box, and then click on device in the list manager programs.

  b. double-click keyboard, right-click on the keyboard you are using, and then click Uninstall.
  c. restart the computer.

  Step 2: Reinstall the keyboard software.

  a. first of all, turn on the device, if you have to and then connect the device to the computer. Your computer detects the device and then reinstall the drivers for the device.

  If please reply and let us know if you need help to solve the problem and we will be happy to help you.

• ON the collection of type of the object does not not with GROUP BY

  Hello
  
  I have an object of type with the collection defined as:

  create or replace type individu_ot as object (
     numero_dossier          number(10),
     code_utilisateur        varchar2(8 char),
     nom                     varchar2(25 char),
     prenom                  varchar2(25 char),
     map member function individu_map return number
  )
  /
  
  create or replace type body individu_ot is 
     map member function individu_map return number 
     is 
     begin
        return SELF.numero_dossier;
     end individu_map;
  end;
  /
  
  create or replace type individu_ntt is table of individu_ot
  /

  When I use simple SQL without no aggregation, the distinct keyword works well and returns me the separate entry of my type of object in the collection:

  SQL> select cast(collect(distinct individu_ot(indivmc.numero_dossier, indivmc.idul, indivmc.nom, indivmc.prenom)) as individu_ntt) as distinct_list
  from   site_section_cours    sisc
            inner join enseignant_section_mc   ensemc
            on sisc.code_session = ensemc.code_session and
               sisc.numero_reference_section_cours = ensemc.numero_reference_section_cours
            inner join individu_mc indivmc
            on ensemc.numero_dossier_pidm = indivmc.numero_dossier
  where  sisc.seq_site_cours = 6
  
  DISTINCT_LIST(NUMERO_DOSSIER,CODE_UTILISATEUR,NOM,PRENOM)                                                                                                                                                                                             
  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  INDIVIDU_NTT(INDIVIDU_OT(15,PROF5,Amidala,Padmé))                                                                                                                                                                                                     
  1 row selected.

  However in SQL with a wide range in group by, the separate no longer works.

  SQL> select *
  from   (
           select sisc.seq_site_cours,
                  cast(collect(distinct individu_ot(indivmc.numero_dossier, indivmc.idul, indivmc.nom, indivmc.prenom)) as individu_ntt) as distinct_list
           from   site_section_cours      sisc
                     inner join enseignant_section_mc   ensemc
                     on sisc.code_session = ensemc.code_session and
                        sisc.numero_reference_section_cours = ensemc.numero_reference_section_cours
                     inner join individu_mc indivmc
                     on ensemc.numero_dossier_pidm = indivmc.numero_dossier
           group by sisc.seq_site_cours
  )
  where seq_site_cours = 6
  
  SEQ_SITE_COURS DISTINCT_LIST(NUMERO_DOSSIER,CODE_UTILISATEUR,NOM,PRENOM)                                                                                                                                                                                             
  -------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
               6 INDIVIDU_NTT(INDIVIDU_OT(15,PROF5,Amidala,Padmé),INDIVIDU_OT(15,PROF5,Amidala,Padmé),INDIVIDU_OT(15,PROF5,Amidala,Padmé),INDIVIDU_OT(15,PROF5,Amidala,Padmé),INDIVIDU_OT(15,PROF5,Amidala,Padmé))                                                     
  1 row selected.

  There are cases where I need to return collections with more than one, separate entries in it.
  
  Is there something that I am missing?
  Thank you
  Bruno

  Not a bug, rather an undocumented feature.

  Here are some alternatives that you can test:

  (1) using the operator SET to eliminate duplicates:

  SELECT sisc.seq_site_cours,
         set(
           cast(
             collect(individu_ot(indivmc.numero_dossier, indivmc.idul, indivmc.nom, indivmc.prenom))
             as individu_ntt
           )
         ) as distinct_list
  FROM site_section_cours sisc
       INNER JOIN enseignant_section_mc ensemc
               ON sisc.code_session = ensemc.code_session
               AND sisc.numero_reference_section_cours = ensemc.numero_reference_section_cours
       INNER JOIN individu_mc indivmc
               ON ensemc.numero_dossier_pidm = indivmc.numero_dossier
  GROUP BY sisc.seq_site_cours
  ;
  

  (2) using the MULTISET with a subquery

  SELECT sisc.seq_site_cours,
         CAST(
           MULTISET(
             SELECT distinct
                    indivmc.numero_dossier, indivmc.idul, indivmc.nom, indivmc.prenom
             FROM enseignant_section_mc ensemc
                  INNER JOIN individu_mc indivmc
                          ON ensemc.numero_dossier_pidm = indivmc.numero_dossier
             WHERE sisc.code_session = ensemc.code_session
             AND sisc.numero_reference_section_cours = ensemc.numero_reference_section_cours
           )
           AS individu_ntt
         ) AS distinct_list
  FROM site_section_cours sisc
  ;
  

• type of CS5.5 Illustrator editable, no selectable with the text tool

  Hi people, working on a poster in Illustrator. Added the type of area, using the text tool. Now I would like to increase the size of a single line. I can't select or change any type with the text tool. I have moved into a new layer, registered, closed type Illustrator, restarted my Mac (OS X 10.7.4).) Looked in preferences, in which case there is a problem. No luck.

  Furthermore, I don't see two handles when selecting the tool more. Don't know if that is related.

  Display > display the edges

  View > see the bounding box

• Help with the strangeness of the Strict type validation

  Am just store a few mistakes to post a page to the Strict doctype.

  I can get it down to a single, simple search for error:

  http://validator.w3.org/check?URI=http%3A%2f%2Fwww.safariawards.com%2Fnominees11%2Findexa. PHP & charset = % 28detect + automatically % 29 & doctype = Inline & group = 0 & user agent = W3C_Validator % 2F1.2

  However, if I fix this error and replace:

  < td width = "390" >

  with

  < class td = "width390" >

  Instead, the page comes next with 31 errors:

  http://validator.w3.org/check?URI=http%3A%2f%2Fwww.safariawards.com%2Fnominees11%2Findexb. PHP & charset = % 28detect + automatically % 29 & doctype = Inline & group = 0 & user agent = W3C_Validator % 2F1.2

  Which is a little annoying...

  If someone could shed light on what is happening here and how to resolve the issue, which would be much appreciated.

  Thank you.

  It is too simple. If you go on line 197

  
  

  A

  
  http://www.goodsafariguide.com/hit_counter2.php?LodgeID=606 "onclick ="window.open (this.href, "_blank"); return false; ' > Africa House Royal Malewane

  you see a space between 606 and the closing quotes, and no space between the quotes of closing and onclick. This line should look like

  
  

  A

  
  http://www.goodsafariguide.com/hit_counter2.php?LodgeID=606"onclick ="window.open (this.href, "_blank");" return false; ' > Africa House Royal Malewane

  After correcting all 402 type with the same error, your document will get the Green Panel.

  GRAMPS

• Gateway characteristics with reference to the Id of the step

  Hello

  I almost wrote a NIRG Type to old XML-Reportformat of NOR-TestStand.

  http://forums.NI.com/T5/NI-TestStand/requirements-gateway-and-XML-reports/m-p/2180354/highlight/true...

  At the moment there is 'simple' Challange. In my XML reportfile, there is a main space inside a StepId.

  ID #: rLdC0wzTCEmL7Hz / UyvgLD

  Is it possible to place a regular expression to getrid of him?

  

  For the moment, I modified the requirement within Teststand-type with the Format identifier: "\1", it works but

  of course the external link at the stage of TestStand fail...

  Concerning

  Jürgen

  Hello

  I found the solution '(\S.*)' to cut ws. Infact, this seems very easy. The most important thing is that the "()" breakets have been

  pleaced for grouping! without them, NOTHING works. Here, the \1 in the format of identification code is optional. You need it if you put more

  only one group.

  

  Concerning

  Jürgen

• Communication problem with the printer

  I'm trying to print on a printer Lexmark 1200 series of a Toshiba laptop. Laptop computer identifies the printer is the printer is displayed in the control panel. Whenever I try to print even if I get a message that says: "communication problem with the printer. Any help is appreciated.

  Hi Nick,

  1. What is the exact model of the printer number?

  2 is this problem limited to any specific application such as Internet Explorer, Microsoft Word etc.?

  It seems that some of the 1200 Series printers is not compatible with Windows 7. You can enter the number of exact model and research for more information.

  http://www.microsoft.com/en-us/windows/compatibility/win7/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win7&Locale=en-us&TextSearch=lexmark%2B1200%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  If the printer is compatible and you are always faced with the question, you can proceed with the steps.

  Method 1:

  Run the troubleshooter and update printer drivers.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:

  If the problem persists. I suggest you perform the steps described in the article.

  "Communication not available" or "Document Failed to Print" Error Message and the print job hangs in the print queue

  http://support.Lexmark.com/index?page=content&ID=SO4473&locale=en&UserLocale=en_US

  Note: Antivirus software can help protect your computer against viruses and other security threats. Have a computer without any security software can cause a potential danger to your computer. Therefore, make sure to activate the firewall and security software once you are finished with the test.

  Hope this information helps. Response with status so that we can help you.

• Help... MacBook pro with the latest version of el capitan does not open creative cloud.

  After being on the phone with Adobe for more than an hour, I downloaded the creative cloud, with lightroom, photoshop and illustrator. It took about an hour to install the applications. Now my creative cloud does nothing when I click on it. It's just a blank white screen. I need to work for the school and have spent hours trying to figure it out. Help!

  Try with the steps mentioned below:

  N ° 1)

  Launch the activity monitor and force them to leave Adobe all processes as creative cloud. CoreSync, AAMUpdater... etc.

  Step 2)

  
  

  (1) right click on the Finder icon and select 'Go - To Folder' option.
  (2) you will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library

  It will open the folder of the user's library.

  (3) then navigate to Application Support > Adobe > OOBE. Open the OOBE folder and Opm.db bin file.

  Once you had trashed Opm.db file, restart the Adobe Creative Cloud app and check.

  Always the same?

  Try steps mentioned in the link below:

  White cloud screen on mac creative